This page provides a guide to Establishing a Connection to SAP ByDesign in CData Cloud, as well as information on the available resources, and a reference to the available connection properties.

Connecting to SAP ByDesign

Establishing a Connection shows how to authenticate to SAP ByDesign and configure any necessary connection properties to create a database in CData Cloud

Accessing Data from CData Cloud Services

Accessing data from SAP ByDesign through the available standard services and CData Cloud administration is documented in further details in the CData Cloud Documentation.

Connect to SAP ByDesign by selecting the corresponding icon in the Database tab. Required properties are listed under Settings. The Advanced tab lists connection properties that are not typically required.

This section documents how to provide authentication for your account and service type and then connect.

Authenticate a SAPByDesign Account

Set the following connection properties to connect to SAP ByDesign.

Connect to a Analytical Service

• URL: Set this to the Url of your SAP ByDesign site. For example, https://test.sapbydesign.com.
• ServiceType: If you want to retrieve the reports of a analytical service, specify ServiceType=AnalyticsService;.
• ServiceName: The name of the service you want to retrieve data from. Only none or one service must be specified. If you want to specify a list of services, see BrowsableSchemas.

  If you're not sure what service to specify, you can always query the sys_schemas to list available services.

• User: Set this to the username of your account.
• Password: Set this to the password of your account.

Analytical Service Connection String Example:

Url=https://test.sapbydesign.com;ServiceType=AnalyticsService;ServiceName=cc_home_analytics.svc;User=Test;Password=test;

Connect to a Custom Service

• URL: Set this to the Url of your SAP ByDesign site. For example, https://test.sapbydesign.com.
• ServiceType: If you have a custom service you want to retrieve data from, specify ServiceType=CustomService;.
• ServiceName: The name of the service you want to retrieve data from. Only none or one service must be specified. If you want to specify a list of services, see BrowsableSchemas.

  If you're not sure what service to specify, you can always query the sys_schemas to list available services.

• User: Set this to the username of your account.
• Password: Set this to the password of your account.

Custom Service Connection String Example:

Url=https://test.sapbydesign.com;ServiceType=CustomService;ServiceName=khsalesorder;User=Test;Password=test;

Connect to the ODataDataSource API

• URL: Set this to the Url of your SAP ByDesign site. For example, https://test.sapbydesign.com.
• ServiceType: If you want to query OData Data Source API( odata/analytics/ds) , specify ServiceType=ODataDataSource.
• ServiceName: The name of the service you want to retrieve data from. Only none or one service must be specified. If you want to specify a list of services, see BrowsableSchemas.

  If you're not sure what service to specify, you can always query the sys_schemas to list available services.

• User: Set this to the username of your account.
• Password: Set this to the password of your account.

ODataDataSource Connection String Example:

Url=https://test.sapbydesign.com;ServiceType=ODataDataSource;ServiceName=Customer.svc;User=Test;Password=test;

Authenticate with Azure AD (SSO)

If your organization uses Microsoft Entra ID (formerly Azure Active Directory) to manage user identities, you can authenticate to SAP ByDesign using Single Sign-On (SSO). This method allows users to connect without directly supplying a username or password.

To use Azure AD authentication, set the following connection properties:

• URL: Set this to the URl of your SAP ByDesign site.
• ServiceType: Specify the type of service: AnalyticsService, CustomService, or ODataDataSource.
• ServiceName: Set this to the name of the service to connect to.
• AuthScheme: Set this to AzureAD.
• InitiateOAuth: Set this to GETANDREFRESH to allow automatic token acquisition and refresh.
• OAuthClientId: Set this to the OAuth client ID of your SAP ByDesign application. This is separate from your Entra ID app registration.
• SSOProperties: A semicolon-delimited string containing Azure AD configuration details. See below for supported keys.

Azure AD Connection String Example:

URL=https://my999999.businessbydesign.cloud.sap;
ServiceType=AnalyticsService;
ServiceName=cc_home_analytics.svc;
AuthScheme=AzureAD;
InitiateOAuth=GETANDREFRESH;
OAuthClientId=SAP_APP_CLIENT_ID;
SSOProperties='AzureTenant=TENANT_ID;OAuthClientId=AZURE_AD_APP_CLIENT_ID;OAuthClientSecret=AZURE_AD_CLIENT_SECRET;CallbackURL=http://localhost:33333'

Supported SSOProperties keys:

The SSOProperties connection property contains a semicolon-delimited list of key-value pairs required for OAuth-based authentication with Microsoft Entra ID (Azure AD). These keys correspond to fields used in the OAuth 2.0 authorization code flow, which Entra ID implements for SSO. The Cloud uses these values to construct the necessary requests to Microsoft's identity platform.

• AzureTenant: The Entra ID (Azure AD) tenant ID, which can be a GUID or verified domain.
• OAuthClientId: The client ID of your Entra ID app registration. This is not the same as the SAP app client ID.
• OAuthClientSecret: The client secret of your Entra ID app.
• CallbackURL: (optional) The redirect URI registered in Entra ID. The default is http://localhost:33333.
• Scope: (optional) The OAuth scopes to request during authentication.

Note: There are two OAuthClientId values:

• The top-level OAuthClientId refers to the app registered in SAP ByDesign.
• The OAuthClientId inside SSOProperties refers to the app registered in Microsoft Entra ID.

For details on registering a Microsoft Entra ID application, see Creating an Entra ID (Azure AD) Application

Add a new custom ODATA service

• In the SAP ByDesign work center view, click on "Application and User Management".
• Select "OData Services".
• In the dropdown list, select "Custom OData Services".
• Now you should see a list of your current custom services. To add a new one click on "New".

SAP ByDesign URL Restrictions

The SAP ByDesign Cloud enforces URL restrictions to avoid exceeding the maximum of allowed URI length, which causes the service to throw "URI Too Long" error"

By default, the length of the columns in the projection is limited to 1000 characters. If the columns selected in the projection surpass this limit, the driver drops the projection specification and retrieves all fields. This may impact performance because of service response delay and increased payload.

In the case of the analytical service (ServiceType=AnalyticsService), the driver throws an error indicating you must reduce the number of columns in the projection. In addition, the server-side filter length is restricted to 1000 characters for the same reasons. If the generated filter length surpasses this limit, the driver drops the additional filters and handles them client-side.

In SAP ByDesign, you can configure or disable these limitations by using the MaxSelectLength and MaxFilterLength hidden connection properties. These properties both default to 1000 characters. If your service does not have these restrictions, set the properties to -1 to disable the length limitations.

Navigation Properties As Views

Navigation properties are properties on an entity that is itself either a single related entity or list of related entities.
By default, these are exposed as views, although they may be hidden by setting NavigationPropertiesAsViews to false.
This property will only have an effect when working with ServiceType=CustomService as there are no navigation properties when dealing with other services.

Customizing the SSL Configuration

To enable TLS, set the following:

• URL: Prefix the connection string with https://

With this configuration, the Cloud attempts to negotiate TLS with the server. The server certificate is validated against the default system trusted certificate store. You can override how the certificate gets validated using the SSLServerCert connection property.

To specify another certificate, see the SSLServerCert connection property.

Connecting Through a Firewall or Proxy

HTTP Proxies

To authenticate to an HTTP proxy, set the following:

• ProxyServer: the hostname or IP address of the proxy server that you want to route HTTP traffic through.
• ProxyPort: the TCP port that the proxy server is running on.
• ProxyAuthScheme: the authentication method the Cloud uses when authenticating to the proxy server.
• ProxyUser: the username of a user account registered with the proxy server.
• ProxyPassword: the password associated with the ProxyUser.

Other Proxies

Set the following properties:

• To use a proxy-based firewall, set FirewallType, FirewallServer, and FirewallPort.
• To tunnel the connection, set FirewallType to TUNNEL.
• To authenticate, specify FirewallUser and FirewallPassword.
• To authenticate to a SOCKS proxy, additionally set FirewallType to SOCKS5.

Overview

This section shows the available API objects and provides more information on executing SQL to SAP ByDesign APIs.

Key Features

• The Cloud models SAP ByDesign Analytics Services as relational views. Entities defined on a Custom Service are modeled using a combination of tables and views, allowing you to write SQL to query SAP ByDesign data.
• Live connectivity to these objects means any changes to your SAP ByDesign account are immediately reflected when using the Cloud.

Tables

Tables are dynamically defined entities available on the ServiceType=CustomService.

Views

Views are dynamically defined either from the Navigation Properties off a ServiceType=CustomService, or from the queries on an ServiceType=AnalyticsService, ServiceType=ODataDataSource.

Analytics Services

To retrieve reports of an analytics service, you must specify the URL ServiceType=AnalyticsService property. For example: Url=https://my999999.businessbydesign.cloud.sap;ServiceType=AnalyticsService;ServiceName=cc_home_analytics.svc; . All the reports are exposed as views. Note that client-side filtering will be disables if one tries to perform an unsupported by the SAP ByDesign API filter on a dimension and at the same time does not include that dimension in the SELECT clause. If you want to make use of client-side filtering (executing filters that are not supported by the SAP ByDesign API), you need to include the dimension in the SELECT clause.

Also, if the query is a star query and the number of the dimensions is higher than 15, the driver will use only the default dimension and ignore the others. This is done because it is really hard to give sense to a result set with too many dimensions. This use case is common when the driver is used in various tools. The default dimension is chosen dynamically randomly by the driver.

The Cloud exposes tables for every entity set and singleton defined on the SAP ByDesign root URL. Entities on these tables may be inserted, updated, or deleted using standard SQL insert, update, or delete statements.

Executing Deep Inserts with SQL

The Cloud supports OData deep inserts, in which you simultaneously create a base entity and link it to related entities, by specifying navigation properties. To specify Navigation Properties for an entity, you create a temporary table for the navigation property and then reference the temporary table in the insert to the base table. Reference the temporary table in the appropriate navigation property column on the base table. Each navigation property column is prefixed with the word "Linked".

Note that you must define the temporary tables and insert to the base entity within the same connection.

Example: Deep Inserts

For example, consider a table, Orders. To create a new Order, you specify the Products ordered, Customer, Employee, and Shipper. To do so, you need to specify the following navigation properties.

Creating Temporary Tables

Insert the related entities into temporary tables that correspond to each navigation property. You can specify an existing entity's primary key or you can insert a new entity.

• Customer: The following statement creates a new Customer:
  

  INSERT INTO Customers#TEMP (CustomerID, CompanyName, ContactName, ContactTitle, Address, City, PostalCode, Country, Phone, Fax) 
  VALUES ('VINET', 'Vins et alcools Chevalier', 'Paul Henriot', 'Accounting Manager', '59 rue de l''Abbaye', 'Reims', '51100', 'France', '26.47.15.10', '26.47.15.11')

• Order Details: The following statements add two Products to the Order:
  

  INSERT INTO Order_Details#TEMP (ProductID, UnitPrice, Quantity, Discount) VALUES (72, 34.80, 5, 0)
  
  INSERT INTO Order_Details#TEMP (ProductID, UnitPrice, Quantity, Discount) VALUES (42, 9.80, 10, 0)

• Employee: The following statement specifies the existing Employee:
  

  INSERT INTO Employees#TEMP (EmployeeID) 
  VALUES (5)

• Shipper: The following statement specifies the existing Shipper:
  

  INSERT INTO Shippers#TEMP (ShipperID) VALUES (3) 

The CData Cloud will assume that the Shipper and Employee already exist and will only link to the existing references since only the primary keys were specified for either. When more than just the primary key is defined, such as the examples for Customer and Order_Details, the CData Cloud will attempt to create new entries - triggering the deep insert.

Inserting the Entity

In the INSERT statement for the base entity, reference the temporary tables in the LinkedOrder_Details, LinkedCustomer, LinkedEmployee, and LinkedShipper columns:

INSERT INTO Orders (CustomerID, EmployeeID, ShipVia, ShipName, ShipAddress, ShipCity, ShipPostalCode, ShipCountry, OrderDate, LinkedOrder_Details, LinkedCustomer, LinkedEmployee, LinkedShipper) VALUES ('VINET', 5, 3, 'Paul Henriot', '59 rue de l''Abbaye', 'Reims', '51100', 'France', '07/04/1996', 'Order_Details#TEMP', 'Customers#TEMP', 'Employees#TEMP', 'Shippers#TEMP')

In OData, a navigation property is a property on an entity that is itself either a single entity or list of entities.

A single-entity navigation property signifies a one-to-one relationship; for example, an OData service might allow a Product to have only one Category. In this service, Category might be a navigation property on Products.

An entity set navigation property signifies a one-to-many relationship; for example, many Products can belong in the same Category. In this service, Products might be a navigation property on Categories.

Modeling Navigation Properties

By default, the Cloud models Navigation Properties as separate views. The views are named in the format ParentTable_NavigationProperty. You can disable this behavior with NavigationPropertiesAsViews.

Working with Navigation Properties Relationally

Navigation properties in OData link related entities. Similarly, in a relational database, a foreign key serves to link tables. For example, a Product record might have a CategoryId column, which uniquely identifies what Category the Product belongs to. However, there is no requirement in OData that an entity must contain a foreign key reference to a related entity. This means sometimes you will get navigation properties without having a foreign key reference to that entity on the parent or back to the parent from the related entity. In cases without a foreign key reference, the navigation property's existence is the only thing that can be used to identify a relationship between the two entities.

Select

NavigationPropertiesAsViews is useful for accessing data in OData services that lack foreign key references. Likewise, it can be used to retrieve related entites that do not exist by themselves such as LineItems on an Invoice. See tables for more information on querying navigation properties.

Insert

The Cloud supports OData deep inserts. See Tables for more information on specifying navigation properties when you create an entity.

Querying Navigation Properties

For an example of working with a navigation property as a view, consider BusinessPartners. The BusinessPartners entity set has an Orders navigation property. The CData Cloud will display a view called BusinessPartners_Orders for this service. Retrieving data from BusinessPartners_Orders will display all of the Orders associated with a given BusinessPartner. The BusinessPartners_Orders view has a primary key made up of the primary key of the parent entity and the primary key of the related entity.

Stored procedures are function-like interfaces that extend the functionality of the Cloud beyond simple SELECT/INSERT/UPDATE/DELETE operations with SAP ByDesign.

Stored procedures accept a list of parameters, perform their intended function, and then return any relevant response data from SAP ByDesign, along with an indication of whether the procedure succeeded or failed.

CData Cloud - SAP ByDesign Stored Procedures

Name	Description

You can query the system tables described in this section to access schema information, information on data source functionality, and batch operation statistics.

Schema Tables

The following tables return database metadata for SAP ByDesign:

• sys_catalogs: Lists the available databases.
• sys_schemas: Lists the available schemas.
• sys_tables: Lists the available tables and views.
• sys_tablecolumns: Describes the columns of the available tables and views.
• sys_procedures: Describes the available stored procedures.
• sys_procedureparameters: Describes stored procedure parameters.
• sys_keycolumns: Describes the primary and foreign keys.
• sys_indexes: Describes the available indexes.

Data Source Tables

The following tables return information about how to connect to and query the data source:

• sys_connection_props: Returns information on the available connection properties.
• sys_sqlinfo: Describes the SELECT queries that the Cloud can offload to the data source.

Query Information Tables

The following table returns query statistics for data modification queries:

• sys_identity: Returns information about batch operations or single updates.

Lists the available databases.

The following query retrieves all databases determined by the connection string:

SELECT * FROM sys_catalogs

Columns

Name	Type	Description
CatalogName	String	The database name.

Lists the available schemas.

The following query retrieves all available schemas:

          SELECT * FROM sys_schemas
          

Columns

Name	Type	Description
CatalogName	String	The database name.
SchemaName	String	The schema name.

Lists the available tables.

The following query retrieves the available tables and views:

          SELECT * FROM sys_tables
          

Columns

Name	Type	Description
CatalogName	String	The database containing the table or view.
SchemaName	String	The schema containing the table or view.
TableName	String	The name of the table or view.
TableType	String	The table type (table or view).
Description	String	A description of the table or view.
IsUpdateable	Boolean	Whether the table can be updated.

Describes the columns of the available tables and views.

The following query returns the columns and data types for the Account table:

SELECT ColumnName, DataTypeName FROM sys_tablecolumns WHERE TableName='Account' 

Columns

Name	Type	Description
CatalogName	String	The name of the database containing the table or view.
SchemaName	String	The schema containing the table or view.
TableName	String	The name of the table or view containing the column.
ColumnName	String	The column name.
DataTypeName	String	The data type name.
DataType	Int32	An integer indicating the data type. This value is determined at run time based on the environment.
Length	Int32	The storage size of the column.
DisplaySize	Int32	The designated column's normal maximum width in characters.
NumericPrecision	Int32	The maximum number of digits in numeric data. The column length in characters for character and date-time data.
NumericScale	Int32	The column scale or number of digits to the right of the decimal point.
IsNullable	Boolean	Whether the column can contain null.
Description	String	A brief description of the column.
Ordinal	Int32	The sequence number of the column.
IsAutoIncrement	String	Whether the column value is assigned in fixed increments.
IsGeneratedColumn	String	Whether the column is generated.
IsHidden	Boolean	Whether the column is hidden.
IsArray	Boolean	Whether the column is an array.
IsReadOnly	Boolean	Whether the column is read-only.
IsKey	Boolean	Indicates whether a field returned from sys_tablecolumns is the primary key of the table.
ColumnType	String	The role or classification of the column in the schema. Possible values include SYSTEM, LINKEDCOLUMN, NAVIGATIONKEY, REFERENCECOLUMN, and NAVIGATIONPARENTCOLUMN.

Lists the available stored procedures.

The following query retrieves the available stored procedures:

          SELECT * FROM sys_procedures
          

Columns

Name	Type	Description
CatalogName	String	The database containing the stored procedure.
SchemaName	String	The schema containing the stored procedure.
ProcedureName	String	The name of the stored procedure.
Description	String	A description of the stored procedure.
ProcedureType	String	The type of the procedure, such as PROCEDURE or FUNCTION.

Describes stored procedure parameters.

The following query returns information about all of the input parameters for the SelectEntries stored procedure:

SELECT * FROM sys_procedureparameters WHERE ProcedureName = 'SelectEntries' AND Direction = 1 OR Direction = 2

To include result set columns in addition to the parameters, set the IncludeResultColumns pseudo column to True:

SELECT * FROM sys_procedureparameters WHERE ProcedureName = 'SelectEntries' AND IncludeResultColumns='True'

Columns

Name	Type	Description
CatalogName	String	The name of the database containing the stored procedure.
SchemaName	String	The name of the schema containing the stored procedure.
ProcedureName	String	The name of the stored procedure containing the parameter.
ColumnName	String	The name of the stored procedure parameter.
Direction	Int32	An integer corresponding to the type of the parameter: input (1), input/output (2), or output(4). input/output type parameters can be both input and output parameters.
DataType	Int32	An integer indicating the data type. This value is determined at run time based on the environment.
DataTypeName	String	The name of the data type.
NumericPrecision	Int32	The maximum precision for numeric data. The column length in characters for character and date-time data.
Length	Int32	The number of characters allowed for character data. The number of digits allowed for numeric data.
NumericScale	Int32	The number of digits to the right of the decimal point in numeric data.
IsNullable	Boolean	Whether the parameter can contain null.
IsRequired	Boolean	Whether the parameter is required for execution of the procedure.
IsArray	Boolean	Whether the parameter is an array.
Description	String	The description of the parameter.
Ordinal	Int32	The index of the parameter.
Values	String	The values you can set in this parameter are limited to those shown in this column. Possible values are comma-separated.
SupportsStreams	Boolean	Whether the parameter represents a file that you can pass as either a file path or a stream.
IsPath	Boolean	Whether the parameter is a target path for a schema creation operation.
Default	String	The value used for this parameter when no value is specified.
SpecificName	String	A label that, when multiple stored procedures have the same name, uniquely identifies each identically-named stored procedure. If there's only one procedure with a given name, its name is simply reflected here.
IsCDataProvided	Boolean	Whether the procedure is added/implemented by CData, as opposed to being a native SAP ByDesign procedure.

Pseudo-Columns

Name	Type	Description
IncludeResultColumns	Boolean	Whether the output should include columns from the result set in addition to parameters. Defaults to False.

Describes the primary and foreign keys.

The following query retrieves the primary key for the Account table:

         SELECT * FROM sys_keycolumns WHERE IsKey='True' AND TableName='Account' 
          

Columns

Name	Type	Description
CatalogName	String	The name of the database containing the key.
SchemaName	String	The name of the schema containing the key.
TableName	String	The name of the table containing the key.
ColumnName	String	The name of the key column.
IsKey	Boolean	Whether the column is a primary key in the table referenced in the TableName field.
IsForeignKey	Boolean	Whether the column is a foreign key referenced in the TableName field.
PrimaryKeyName	String	The name of the primary key.
ForeignKeyName	String	The name of the foreign key.
ReferencedCatalogName	String	The database containing the primary key.
ReferencedSchemaName	String	The schema containing the primary key.
ReferencedTableName	String	The table containing the primary key.
ReferencedColumnName	String	The column name of the primary key.

Describes the foreign keys.

The following query retrieves all foreign keys which refer to other tables:

         SELECT * FROM sys_foreignkeys WHERE ForeignKeyType = 'FOREIGNKEY_TYPE_IMPORT'
          

Columns

Name	Type	Description
CatalogName	String	The name of the database containing the key.
SchemaName	String	The name of the schema containing the key.
TableName	String	The name of the table containing the key.
ColumnName	String	The name of the key column.
PrimaryKeyName	String	The name of the primary key.
ForeignKeyName	String	The name of the foreign key.
ReferencedCatalogName	String	The database containing the primary key.
ReferencedSchemaName	String	The schema containing the primary key.
ReferencedTableName	String	The table containing the primary key.
ReferencedColumnName	String	The column name of the primary key.
ForeignKeyType	String	Designates whether the foreign key is an import (points to other tables) or export (referenced from other tables) key.

Describes the primary keys.

The following query retrieves the primary keys from all tables and views:

         SELECT * FROM sys_primarykeys
          

Columns

Name	Type	Description
CatalogName	String	The name of the database containing the key.
SchemaName	String	The name of the schema containing the key.
TableName	String	The name of the table containing the key.
ColumnName	String	The name of the key column.
KeySeq	String	The sequence number of the primary key.
KeyName	String	The name of the primary key.

Describes the available indexes. By filtering on indexes, you can write more selective queries with faster query response times.

The following query retrieves all indexes that are not primary keys:

          SELECT * FROM sys_indexes WHERE IsPrimary='false'
          

Columns

Name	Type	Description
CatalogName	String	The name of the database containing the index.
SchemaName	String	The name of the schema containing the index.
TableName	String	The name of the table containing the index.
IndexName	String	The index name.
ColumnName	String	The name of the column associated with the index.
IsUnique	Boolean	True if the index is unique. False otherwise.
IsPrimary	Boolean	True if the index is a primary key. False otherwise.
Type	Int16	An integer value corresponding to the index type: statistic (0), clustered (1), hashed (2), or other (3).
SortOrder	String	The sort order: A for ascending or D for descending.
OrdinalPosition	Int16	The sequence number of the column in the index.

Returns information on the available connection properties and those set in the connection string.

The following query retrieves all connection properties that have been set in the connection string or set through a default value:

SELECT * FROM sys_connection_props WHERE Value <> ''

Columns

Name	Type	Description
Name	String	The name of the connection property.
ShortDescription	String	A brief description.
Type	String	The data type of the connection property.
Default	String	The default value if one is not explicitly set.
Values	String	A comma-separated list of possible values. A validation error is thrown if another value is specified.
Value	String	The value you set or a preconfigured default.
Required	Boolean	Whether the property is required to connect.
Category	String	The category of the connection property.
IsSessionProperty	String	Whether the property is a session property, used to save information about the current connection.
Sensitivity	String	The sensitivity level of the property. This informs whether the property is obfuscated in logging and authentication forms.
PropertyName	String	A camel-cased truncated form of the connection property name.
Ordinal	Int32	The index of the parameter.
CatOrdinal	Int32	The index of the parameter category.
Hierarchy	String	Shows dependent properties associated that need to be set alongside this one.
Visible	Boolean	Informs whether the property is visible in the connection UI.
ETC	String	Various miscellaneous information about the property.

Describes the SELECT query processing that the Cloud can offload to the data source.

See SQL Compliance for SQL syntax details.

Discovering the Data Source's SELECT Capabilities

Below is an example data set of SQL capabilities. Some aspects of SELECT functionality are returned in a comma-separated list if supported; otherwise, the column contains NO.

Name	Description	Possible Values
AGGREGATE_FUNCTIONS	Supported aggregation functions.	AVG, COUNT, MAX, MIN, SUM, DISTINCT
COUNT	Whether COUNT function is supported.	YES, NO
IDENTIFIER_QUOTE_OPEN_CHAR	The opening character used to escape an identifier.	[
IDENTIFIER_QUOTE_CLOSE_CHAR	The closing character used to escape an identifier.	]
SUPPORTED_OPERATORS	A list of supported SQL operators.	=, >, <, >=, <=, <>, !=, LIKE, NOT LIKE, IN, NOT IN, IS NULL, IS NOT NULL, AND, OR
GROUP_BY	Whether GROUP BY is supported, and, if so, the degree of support.	NO, NO_RELATION, EQUALS_SELECT, SQL_GB_COLLATE
OJ_CAPABILITIES	The supported varieties of outer joins supported.	NO, LEFT, RIGHT, FULL, INNER, NOT_ORDERED, ALL_COMPARISON_OPS
OUTER_JOINS	Whether outer joins are supported.	YES, NO
SUBQUERIES	Whether subqueries are supported, and, if so, the degree of support.	NO, COMPARISON, EXISTS, IN, CORRELATED_SUBQUERIES, QUANTIFIED
STRING_FUNCTIONS	Supported string functions.	LENGTH, CHAR, LOCATE, REPLACE, SUBSTRING, RTRIM, LTRIM, RIGHT, LEFT, UCASE, SPACE, SOUNDEX, LCASE, CONCAT, ASCII, REPEAT, OCTET, BIT, POSITION, INSERT, TRIM, UPPER, REGEXP, LOWER, DIFFERENCE, CHARACTER, SUBSTR, STR, REVERSE, PLAN, UUIDTOSTR, TRANSLATE, TRAILING, TO, STUFF, STRTOUUID, STRING, SPLIT, SORTKEY, SIMILAR, REPLICATE, PATINDEX, LPAD, LEN, LEADING, KEY, INSTR, INSERTSTR, HTML, GRAPHICAL, CONVERT, COLLATION, CHARINDEX, BYTE
NUMERIC_FUNCTIONS	Supported numeric functions.	ABS, ACOS, ASIN, ATAN, ATAN2, CEILING, COS, COT, EXP, FLOOR, LOG, MOD, SIGN, SIN, SQRT, TAN, PI, RAND, DEGREES, LOG10, POWER, RADIANS, ROUND, TRUNCATE
TIMEDATE_FUNCTIONS	Supported date/time functions.	NOW, CURDATE, DAYOFMONTH, DAYOFWEEK, DAYOFYEAR, MONTH, QUARTER, WEEK, YEAR, CURTIME, HOUR, MINUTE, SECOND, TIMESTAMPADD, TIMESTAMPDIFF, DAYNAME, MONTHNAME, CURRENT_DATE, CURRENT_TIME, CURRENT_TIMESTAMP, EXTRACT
REPLICATION_SKIP_TABLES	Indicates tables skipped during replication.
REPLICATION_TIMECHECK_COLUMNS	A string array containing a list of columns which will be used to check for (in the given order) to use as a modified column during replication.
IDENTIFIER_PATTERN	String value indicating what string is valid for an identifier.
SUPPORT_TRANSACTION	Indicates if the provider supports transactions such as commit and rollback.	YES, NO
DIALECT	Indicates the SQL dialect to use.
KEY_PROPERTIES	Indicates the properties which identify the uniform database.
SUPPORTS_MULTIPLE_SCHEMAS	Indicates if multiple schemas may exist for the provider.	YES, NO
SUPPORTS_MULTIPLE_CATALOGS	Indicates if multiple catalogs may exist for the provider.	YES, NO
DATASYNCVERSION	The CData Data Sync version needed to access this driver.	Standard, Starter, Professional, Enterprise
DATASYNCCATEGORY	The CData Data Sync category of this driver.	Source, Destination, Cloud Destination
SUPPORTSENHANCEDSQL	Whether enhanced SQL functionality beyond what is offered by the API is supported.	TRUE, FALSE
SUPPORTS_BATCH_OPERATIONS	Whether batch operations are supported.	YES, NO
SQL_CAP	All supported SQL capabilities for this driver.	SELECT, INSERT, DELETE, UPDATE, TRANSACTIONS, ORDERBY, OAUTH, ASSIGNEDID, LIMIT, LIKE, BULKINSERT, COUNT, BULKDELETE, BULKUPDATE, GROUPBY, HAVING, AGGS, OFFSET, REPLICATE, COUNTDISTINCT, JOINS, DROP, CREATE, DISTINCT, INNERJOINS, SUBQUERIES, ALTER, MULTIPLESCHEMAS, GROUPBYNORELATION, OUTERJOINS, UNIONALL, UNION, UPSERT, GETDELETED, CROSSJOINS, GROUPBYCOLLATE, MULTIPLECATS, FULLOUTERJOIN, MERGE, JSONEXTRACT, BULKUPSERT, SUM, SUBQUERIESFULL, MIN, MAX, JOINSFULL, XMLEXTRACT, AVG, MULTISTATEMENTS, FOREIGNKEYS, CASE, LEFTJOINS, COMMAJOINS, WITH, LITERALS, RENAME, NESTEDTABLES, EXECUTE, BATCH, BASIC, INDEX
PREFERRED_CACHE_OPTIONS	A string value specifies the preferred cacheOptions.
ENABLE_EF_ADVANCED_QUERY	Indicates if the driver directly supports advanced queries coming from Entity Framework. If not, queries will be handled client side.	YES, NO
PSEUDO_COLUMNS	A string array indicating the available pseudo columns.
MERGE_ALWAYS	If the value is true, The Merge Mode is forcibly executed in Data Sync.	TRUE, FALSE
REPLICATION_MIN_DATE_QUERY	A select query to return the replicate start datetime.
REPLICATION_MIN_FUNCTION	Allows a provider to specify the formula name to use for executing a server side min.
REPLICATION_START_DATE	Allows a provider to specify a replicate startdate.
REPLICATION_MAX_DATE_QUERY	A select query to return the replicate end datetime.
REPLICATION_MAX_FUNCTION	Allows a provider to specify the formula name to use for executing a server side max.
IGNORE_INTERVALS_ON_INITIAL_REPLICATE	A list of tables which will skip dividing the replicate into chunks on the initial replicate.
CHECKCACHE_USE_PARENTID	Indicates whether the CheckCache statement should be done against the parent key column.	TRUE, FALSE
CREATE_SCHEMA_PROCEDURES	Indicates stored procedures that can be used for generating schema files.

The following query retrieves the operators that can be used in the WHERE clause:

SELECT * FROM sys_sqlinfo WHERE Name = 'SUPPORTED_OPERATORS'

Note that individual tables may have different limitations or requirements on the WHERE clause; refer to the Data Model section for more information.

Columns

Name	Type	Description
NAME	String	A component of SQL syntax, or a capability that can be processed on the server.
VALUE	String	Detail on the supported SQL or SQL syntax.

Returns information about attempted modifications.

The following query retrieves the Ids of the modified rows in a batch operation:

         SELECT * FROM sys_identity
          

Columns

Name	Type	Description
Id	String	The database-generated Id returned from a data modification operation.
Batch	String	An identifier for the batch. 1 for a single operation.
Operation	String	The result of the operation in the batch: INSERTED, UPDATED, or DELETED.
Message	String	SUCCESS or an error message if the update in the batch failed.

Describes the available system information.

The following query retrieves all columns:

SELECT * FROM sys_information

Columns

Name	Type	Description
Product	String	The name of the product.
Version	String	The version number of the product.
Datasource	String	The name of the datasource the product connects to.
NodeId	String	The unique identifier of the machine where the product is installed.
HelpURL	String	The URL to the product's help documentation.
License	String	The license information for the product. (If this information is not available, the field may be left blank or marked as 'N/A'.)
Location	String	The file path location where the product's library is stored.
Environment	String	The version of the environment or rumtine the product is currently running under.
DataSyncVersion	String	The tier of CData Sync required to use this connector.
DataSyncCategory	String	The category of CData Sync functionality (e.g., Source, Destination).

The connection string properties are the various options that can be used to establish a connection. This section provides a complete list of the options you can configure in the connection string for this provider. Click the links for further details.

For more information on establishing a connection, see Establishing a Connection.

Authentication

---

Property	Description
AuthScheme	The type of authentication to use when connecting to SAP ByDesign.
URL	URL to your system host name.
ServiceType	Specify the type of the service to get reports from. Used together with the URL and ServiceName connection properties to determine the service from where to retrieve data from.
User	Specifies the authenticating user's user ID.
Password	Specifies the authenticating user's password.

Azure Authentication

---

Property	Description
AzureTenant	Identifies the SAP ByDesign tenant being used to access data. Accepts either the tenant's domain name (for example, contoso.onmicrosoft.com ) or its directory (tenant) ID.

SSO

---

Property	Description
SSOProperties	Additional properties required to connect to the identity provider, formatted as a semicolon-separated list.

OAuth

---

Property	Description
OAuthClientId	Specifies the client ID (also known as the consumer key) assigned to your custom OAuth application. This ID is required to identify the application to the OAuth authorization server during authentication.

SSL

---

Property	Description
SSLServerCert	Specifies the certificate to be accepted from the server when connecting using TLS/SSL.

Logging

---

Property	Description
Verbosity	Specifies the verbosity level of the log file, which controls the amount of detail logged. Supported values range from 1 to 5.

Connection

---

Property	Description
ServiceName	Specify the SAP ByDesign service name to connect with.

Schema

---

Property	Description
BrowsableSchemas	Optional setting that restricts the schemas reported to a subset of all available schemas. For example, BrowsableSchemas=SchemaA,SchemaB,SchemaC .

Miscellaneous

---

Property	Description
ExpandAsterisk	Indicates whether the asterisk should be expanded in the $select query parameter.
MaxReportDimensions	The default number of dimensions to select from queried reports.
MaxRows	Specifies the maximum number of rows returned for queries that do not include either aggregation or GROUP BY.
MaxSelectLength	Specifies a maximum length for columns in $select projections to prevent [414] URI Too Long errors. Set to -1 to disable. Not supported when ServiceType is AnalyticsService.
NavigationPropertiesAsViews	A boolean indicating navigation properties should be promoted to full views.
Timeout	Specifies the maximum time, in seconds, that the provider waits for a server response before throwing a timeout error.
UseDisplayNames	Boolean determining whether or not to use SAP labels.

This section provides a complete list of the Authentication properties you can configure in the connection string for this provider.

---

Property	Description
AuthScheme	The type of authentication to use when connecting to SAP ByDesign.
URL	URL to your system host name.
ServiceType	Specify the type of the service to get reports from. Used together with the URL and ServiceName connection properties to determine the service from where to retrieve data from.
User	Specifies the authenticating user's user ID.
Password	Specifies the authenticating user's password.

The type of authentication to use when connecting to SAP ByDesign.

Possible Values

Basic, AzureAD

Data Type

string

Default Value

"Basic"

Remarks

• Basic: Set this to use BASIC user / password authentication.
• AzureAD: Set this to perform SSO authentication with AzureAD. Refer to the connection property SSOProperties for more information.

URL to your system host name.

Data Type

string

Default Value

""

Remarks

URL to your system host name.

Specify the type of the service to get reports from. Used together with the URL and ServiceName connection properties to determine the service from where to retrieve data from.

Possible Values

AnalyticsService, CustomService, ODataDataSource

Data Type

string

Default Value

"AnalyticsService"

Remarks

• AnalyticsService : If you want to retrieve reports from analytic service.
• CustomService : If you want to want to retrieve data from the custom service you have configured in the UI.
• ODataDataSource: If you want to query the DataSources (OData Data Source API -> odata/analytics/ds ).

Specifies the authenticating user's user ID.

Data Type

string

Default Value

""

Remarks

The authenticating server requires both User and Password to validate the user's identity.

Specifies the authenticating user's password.

Data Type

string

Default Value

""

Remarks

The authenticating server requires both User and Password to validate the user's identity.

This section provides a complete list of the Azure Authentication properties you can configure in the connection string for this provider.

---

Property	Description
AzureTenant	Identifies the SAP ByDesign tenant being used to access data. Accepts either the tenant's domain name (for example, contoso.onmicrosoft.com ) or its directory (tenant) ID.

Identifies the SAP ByDesign tenant being used to access data. Accepts either the tenant's domain name (for example, contoso.onmicrosoft.com ) or its directory (tenant) ID.

Data Type

string

Default Value

""

Remarks

A tenant is a digital container for your organization's users and resources, managed through Microsoft Entra ID (formerly Azure AD). Each tenant is associated with a unique directory ID, and often with a custom domain (for example, microsoft.com or contoso.onmicrosoft.com).

To find the directory (tenant) ID in the Microsoft Entra Admin Center, navigate to Microsoft Entra ID > Properties and copy the value labeled "Directory (tenant) ID".

This property is required in the following cases:

• When AuthScheme is set to AzureServicePrincipal or AzureServicePrincipalCert
• When AuthScheme is AzureAD and the user account belongs to multiple tenants

You can provide the tenant value in one of two formats:

• A domain name (for example, contoso.onmicrosoft.com)
• A directory (tenant) ID in GUID format (for example, c9d7b8e4-1234-4f90-bc1a-2a28e0f9e9e0)

Specifying the tenant explicitly ensures that the authentication request is routed to the correct directory, which is especially important when a user belongs to multiple tenants or when using service principal–based authentication.

If this value is omitted when required, authentication may fail or connect to the wrong tenant. This can result in errors such as unauthorized or resource not found.

This section provides a complete list of the SSO properties you can configure in the connection string for this provider.

---

Property	Description
SSOProperties	Additional properties required to connect to the identity provider, formatted as a semicolon-separated list.

Additional properties required to connect to the identity provider, formatted as a semicolon-separated list.

Data Type

string

Default Value

""

Remarks

Additional properties required to connect to the identity provider, formatted as a semicolon-separated list.

SSO configuration is discussed further in .

This section provides a complete list of the OAuth properties you can configure in the connection string for this provider.

---

Property	Description
OAuthClientId	Specifies the client ID (also known as the consumer key) assigned to your custom OAuth application. This ID is required to identify the application to the OAuth authorization server during authentication.

Specifies the client ID (also known as the consumer key) assigned to your custom OAuth application. This ID is required to identify the application to the OAuth authorization server during authentication.

Data Type

string

Default Value

""

Remarks

This property is required in two cases:

• When using a custom OAuth application, such as in web-based authentication flows, service-based authentication, or certificate-based flows that require application registration.
• If the driver does not provide embedded OAuth credentials.

(When the driver provides embedded OAuth credentials, this value may already be provided by the Cloud and thus not require manual entry.)

OAuthClientId is generally used alongside other OAuth-related properties such as OAuthClientSecret and OAuthSettingsLocation when configuring an authenticated connection.

OAuthClientId is one of the key connection parameters that need to be set before users can authenticate via OAuth. You can usually find this value in your identity provider’s application registration settings. Look for a field labeled Client ID, Application ID, or Consumer Key.

While the client ID is not considered a confidential value like a client secret, it is still part of your application's identity and should be handled carefully. Avoid exposing it in public repositories or shared configuration files.

For more information on how this property is used when configuring a connection, see Establishing a Connection.

This section provides a complete list of the SSL properties you can configure in the connection string for this provider.

---

Property	Description
SSLServerCert	Specifies the certificate to be accepted from the server when connecting using TLS/SSL.

Specifies the certificate to be accepted from the server when connecting using TLS/SSL.

Data Type

string

Default Value

""

Remarks

If you are using a TLS/SSL connection, use this property to specify the TLS/SSL certificate to be accepted from the server. If you specify a value for this property, all other certificates that are not trusted by the machine are rejected.

This property can take the following forms:

Description	Example
A full PEM Certificate (example shortened for brevity)	-----BEGIN CERTIFICATE----- MIIChTCCAe4CAQAwDQYJKoZIhv......Qw== -----END CERTIFICATE-----
A path to a local file containing the certificate	C:\cert.cer
The public key (example shortened for brevity)	-----BEGIN RSA PUBLIC KEY----- MIGfMA0GCSq......AQAB -----END RSA PUBLIC KEY-----
The MD5 Thumbprint (hex values can also be either space- or colon-separated)	ecadbdda5a1529c58a1e9e09828d70e4
The SHA1 Thumbprint (hex values can also be either space- or colon-separated)	34a929226ae0819f2ec14b4a3d904f801cbb150d

Note: It is possible to use '*' to signify that all certificates should be accepted, but due to security concerns this is not recommended.

This section provides a complete list of the Logging properties you can configure in the connection string for this provider.

---

Property	Description
Verbosity	Specifies the verbosity level of the log file, which controls the amount of detail logged. Supported values range from 1 to 5.

Specifies the verbosity level of the log file, which controls the amount of detail logged. Supported values range from 1 to 5.

Data Type

string

Default Value

"1"

Remarks

This property defines the level of detail the Cloud includes in the log file. Higher verbosity levels increase the detail of the logged information, but may also result in larger log files and slower performance due to the additional data being captured.

The default verbosity level is 1, which is recommended for regular operation. Higher verbosity levels are primarily intended for debugging purposes. For more information on each level, refer to Logging.

When combined with the LogModules property, Verbosity can refine logging to specific categories of information.

This section provides a complete list of the Connection properties you can configure in the connection string for this provider.

---

Property	Description
ServiceName	Specify the SAP ByDesign service name to connect with.

Specify the SAP ByDesign service name to connect with.

Data Type

string

Default Value

""

Remarks

Specify the SAP ByDesign service name to connect with. Leave this empty to retrieve all services.

This section provides a complete list of the Schema properties you can configure in the connection string for this provider.

---

Property	Description
BrowsableSchemas	Optional setting that restricts the schemas reported to a subset of all available schemas. For example, BrowsableSchemas=SchemaA,SchemaB,SchemaC .

Optional setting that restricts the schemas reported to a subset of all available schemas. For example, BrowsableSchemas=SchemaA,SchemaB,SchemaC .

Data Type

string

Default Value

""

Remarks

Listing all available database schemas can take extra time, thus degrading performance. Providing a list of schemas in the connection string saves time and improves performance.

This section provides a complete list of the Miscellaneous properties you can configure in the connection string for this provider.

---

Property	Description
ExpandAsterisk	Indicates whether the asterisk should be expanded in the $select query parameter.
MaxReportDimensions	The default number of dimensions to select from queried reports.
MaxRows	Specifies the maximum number of rows returned for queries that do not include either aggregation or GROUP BY.
MaxSelectLength	Specifies a maximum length for columns in $select projections to prevent [414] URI Too Long errors. Set to -1 to disable. Not supported when ServiceType is AnalyticsService.
NavigationPropertiesAsViews	A boolean indicating navigation properties should be promoted to full views.
Timeout	Specifies the maximum time, in seconds, that the provider waits for a server response before throwing a timeout error.
UseDisplayNames	Boolean determining whether or not to use SAP labels.

Indicates whether the asterisk should be expanded in the $select query parameter.

Data Type

bool

Default Value

false

Remarks

When ExpandAsterisk is set to true, all columns are listed in the $select query parameter. This property cannot be used when the ServiceType connection property is set to AnalyticsService.

For example:

SELECT * FROM Items

All columns will be listed in projection.

SELECT col1,col2, ... , coln FROM Items

The default number of dimensions to select from queried reports.

Data Type

int

Default Value

15

Remarks

In order to execute SELECT * queries in Reports, you must define a default number of dimensions, which are selected randomly from those available.

By default, the Cloud selects 15 dimensions.

Specifies the maximum number of rows returned for queries that do not include either aggregation or GROUP BY.

Data Type

int

Default Value

-1

Remarks

The default value for this property, -1, means that no row limit is enforced unless the query explicitly includes a LIMIT clause. (When a query includes a LIMIT clause, the value specified in the query takes precedence over the MaxRows setting.)

Setting MaxRows to a whole number greater than 0 ensures that queries do not return excessively large result sets by default.

This property is useful for optimizing performance and preventing excessive resource consumption when executing queries that could otherwise return very large datasets.

Specifies a maximum length for columns in $select projections to prevent [414] URI Too Long errors. Set to -1 to disable. Not supported when ServiceType is AnalyticsService.

Data Type

int

Default Value

1000

Remarks

To avoid the query failing with a [414] URI Too Long error, CData applies a length limit to the columns in projection ($select). The default length limit is 1000. Use this property to increase the limit in situations where the service does not restrict the URI length, or the user wants a higher limit for $select. To disable length limitation, set this property to -1. This property cannot be used when the ServiceType connection property is set to AnalyticsService.

A boolean indicating navigation properties should be promoted to full views.

Data Type

bool

Default Value

true

Remarks

This property can be useful for SAP ByDesign, which can return related collections of entities, or navigation properties. Some SAP ByDesign entities may only be accessed through navigation properties. NavigationPropertiesAsViews will cause all of the discovered navigation properties to be added as views in the format ParentTable_NavigationProperty.

Specifies the maximum time, in seconds, that the provider waits for a server response before throwing a timeout error.

Data Type

int

Default Value

60

Remarks

The timeout applies to each individual communication with the server rather than the entire query or operation. For example, a query could continue running beyond 60 seconds if each paging call completes within the timeout limit.

Timeout is set to 60 seconds by default. To disable timeouts, set this property to 0.

Disabling the timeout allows operations to run indefinitely until they succeed or fail due to other conditions such as server-side timeouts, network interruptions, or resource limits on the server.

Note: Use this property cautiously to avoid long-running operations that could degrade performance or result in unresponsive behavior.

Boolean determining whether or not to use SAP labels.

Data Type

bool

Default Value

false

Remarks

Boolean determining whether or not to use SAP labels.

If set to true, the labels you have configured in your account for the OData properties, will serve as column names. Otherwise, the name of the property will be the column name.

LZMA from 7Zip LZMA SDK

LZMA SDK is placed in the public domain.

Anyone is free to copy, modify, publish, use, compile, sell, or distribute the original LZMA SDK code, either in source code form or as a compiled binary, for any purpose, commercial or non-commercial, and by any means.

LZMA2 from XZ SDK

Version 1.9 and older are in the public domain.

Xamarin.Forms

Xamarin SDK

The MIT License (MIT)

Copyright (c) .NET Foundation Contributors

All rights reserved.

Permission is hereby granted, free of charge, to any person obtaining a copy of this software and associated documentation files (the "Software"), to deal in the Software without restriction, including without limitation the rights to use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of the Software, and to permit persons to whom the Software is furnished to do so, subject to the following conditions:

The above copyright notice and this permission notice shall be included in all copies or substantial portions of the Software.

THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.

NSIS 3.10

Copyright (C) 1999-2025 Contributors THE ACCOMPANYING PROGRAM IS PROVIDED UNDER THE TERMS OF THIS COMMON PUBLIC LICENSE ("AGREEMENT"). ANY USE, REPRODUCTION OR DISTRIBUTION OF THE PROGRAM CONSTITUTES RECIPIENT'S ACCEPTANCE OF THIS AGREEMENT.

1. DEFINITIONS

"Contribution" means:

a) in the case of the initial Contributor, the initial code and documentation distributed under this Agreement, and b) in the case of each subsequent Contributor:

i) changes to the Program, and

ii) additions to the Program;

where such changes and/or additions to the Program originate from and are distributed by that particular Contributor. A Contribution 'originates' from a Contributor if it was added to the Program by such Contributor itself or anyone acting on such Contributor's behalf. Contributions do not include additions to the Program which: (i) are separate modules of software distributed in conjunction with the Program under their own license agreement, and (ii) are not derivative works of the Program.

"Contributor" means any person or entity that distributes the Program.

"Licensed Patents " mean patent claims licensable by a Contributor which are necessarily infringed by the use or sale of its Contribution alone or when combined with the Program.

"Program" means the Contributions distributed in accordance with this Agreement.

"Recipient" means anyone who receives the Program under this Agreement, including all Contributors.

2. GRANT OF RIGHTS

a) Subject to the terms of this Agreement, each Contributor hereby grants Recipient a non-exclusive, worldwide, royalty-free copyright license to reproduce, prepare derivative works of, publicly display, publicly perform, distribute and sublicense the Contribution of such Contributor, if any, and such derivative works, in source code and object code form.

b) Subject to the terms of this Agreement, each Contributor hereby grants Recipient a non-exclusive, worldwide, royalty-free patent license under Licensed Patents to make, use, sell, offer to sell, import and otherwise transfer the Contribution of such Contributor, if any, in source code and object code form. This patent license shall apply to the combination of the Contribution and the Program if, at the time the Contribution is added by the Contributor, such addition of the Contribution causes such combination to be covered by the Licensed Patents. The patent license shall not apply to any other combinations which include the Contribution. No hardware per se is licensed hereunder.

c) Recipient understands that although each Contributor grants the licenses to its Contributions set forth herein, no assurances are provided by any Contributor that the Program does not infringe the patent or other intellectual property rights of any other entity. Each Contributor disclaims any liability to Recipient for claims brought by any other entity based on infringement of intellectual property rights or otherwise. As a condition to exercising the rights and licenses granted hereunder, each Recipient hereby assumes sole responsibility to secure any other intellectual property rights needed, if any. For example, if a third party patent license is required to allow Recipient to distribute the Program, it is Recipient's responsibility to acquire that license before distributing the Program.

d) Each Contributor represents that to its knowledge it has sufficient copyright rights in its Contribution, if any, to grant the copyright license set forth in this Agreement.

3. REQUIREMENTS

A Contributor may choose to distribute the Program in object code form under its own license agreement, provided that:

a) it complies with the terms and conditions of this Agreement; and

b) its license agreement:

i) effectively disclaims on behalf of all Contributors all warranties and conditions, express and implied, including warranties or conditions of title and non-infringement, and implied warranties or conditions of merchantability and fitness for a particular purpose;

ii) effectively excludes on behalf of all Contributors all liability for damages, including direct, indirect, special, incidental and consequential damages, such as lost profits;

iii) states that any provisions which differ from this Agreement are offered by that Contributor alone and not by any other party; and

iv) states that source code for the Program is available from such Contributor, and informs licensees how to obtain it in a reasonable manner on or through a medium customarily used for software exchange.

When the Program is made available in source code form:

a) it must be made available under this Agreement; and

b) a copy of this Agreement must be included with each copy of the Program.

Contributors may not remove or alter any copyright notices contained within the Program.

Each Contributor must identify itself as the originator of its Contribution, if any, in a manner that reasonably allows subsequent Recipients to identify the originator of the Contribution.

4. COMMERCIAL DISTRIBUTION

Commercial distributors of software may accept certain responsibilities with respect to end users, business partners and the like. While this license is intended to facilitate the commercial use of the Program, the Contributor who includes the Program in a commercial product offering should do so in a manner which does not create potential liability for other Contributors. Therefore, if a Contributor includes the Program in a commercial product offering, such Contributor ("Commercial Contributor") hereby agrees to defend and indemnify every other Contributor ("Indemnified Contributor") against any losses, damages and costs (collectively "Losses") arising from claims, lawsuits and other legal actions brought by a third party against the Indemnified Contributor to the extent caused by the acts or omissions of such Commercial Contributor in connection with its distribution of the Program in a commercial product offering. The obligations in this section do not apply to any claims or Losses relating to any actual or alleged intellectual property infringement. In order to qualify, an Indemnified Contributor must: a) promptly notify the Commercial Contributor in writing of such claim, and b) allow the Commercial Contributor to control, and cooperate with the Commercial Contributor in, the defense and any related settlement negotiations. The Indemnified Contributor may participate in any such claim at its own expense.

For example, a Contributor might include the Program in a commercial product offering, Product X. That Contributor is then a Commercial Contributor. If that Commercial Contributor then makes performance claims, or offers warranties related to Product X, those performance claims and warranties are such Commercial Contributor's responsibility alone. Under this section, the Commercial Contributor would have to defend claims against the other Contributors related to those performance claims and warranties, and if a court requires any other Contributor to pay any damages as a result, the Commercial Contributor must pay those damages.

5. NO WARRANTY

EXCEPT AS EXPRESSLY SET FORTH IN THIS AGREEMENT, THE PROGRAM IS PROVIDED ON AN "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED INCLUDING, WITHOUT LIMITATION, ANY WARRANTIES OR CONDITIONS OF TITLE, NON-INFRINGEMENT, MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. Each Recipient is solely responsible for determining the appropriateness of using and distributing the Program and assumes all risks associated with its exercise of rights under this Agreement, including but not limited to the risks and costs of program errors, compliance with applicable laws, damage to or loss of data, programs or equipment, and unavailability or interruption of operations.

6. DISCLAIMER OF LIABILITY

EXCEPT AS EXPRESSLY SET FORTH IN THIS AGREEMENT, NEITHER RECIPIENT NOR ANY CONTRIBUTORS SHALL HAVE ANY LIABILITY FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING WITHOUT LIMITATION LOST PROFITS), HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OR DISTRIBUTION OF THE PROGRAM OR THE EXERCISE OF ANY RIGHTS GRANTED HEREUNDER, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.

7. GENERAL

If any provision of this Agreement is invalid or unenforceable under applicable law, it shall not affect the validity or enforceability of the remainder of the terms of this Agreement, and without further action by the parties hereto, such provision shall be reformed to the minimum extent necessary to make such provision valid and enforceable.

If Recipient institutes patent litigation against a Contributor with respect to a patent applicable to software (including a cross-claim or counterclaim in a lawsuit), then any patent licenses granted by that Contributor to such Recipient under this Agreement shall terminate as of the date such litigation is filed. In addition, if Recipient institutes patent litigation against any entity (including a cross-claim or counterclaim in a lawsuit) alleging that the Program itself (excluding combinations of the Program with other software or hardware) infringes such Recipient's patent(s), then such Recipient's rights granted under Section 2(b) shall terminate as of the date such litigation is filed.

All Recipient's rights under this Agreement shall terminate if it fails to comply with any of the material terms or conditions of this Agreement and does not cure such failure in a reasonable period of time after becoming aware of such noncompliance. If all Recipient's rights under this Agreement terminate, Recipient agrees to cease use and distribution of the Program as soon as reasonably practicable. However, Recipient's obligations under this Agreement and any licenses granted by Recipient relating to the Program shall continue and survive.

Everyone is permitted to copy and distribute copies of this Agreement, but in order to avoid inconsistency the Agreement is copyrighted and may only be modified in the following manner. The Agreement Steward reserves the right to publish new versions (including revisions) of this Agreement from time to time. No one other than the Agreement Steward has the right to modify this Agreement. IBM is the initial Agreement Steward. IBM may assign the responsibility to serve as the Agreement Steward to a suitable separate entity. Each new version of the Agreement will be given a distinguishing version number. The Program (including Contributions) may always be distributed subject to the version of the Agreement under which it was received. In addition, after a new version of the Agreement is published, Contributor may elect to distribute the Program (including its Contributions) under the new version. Except as expressly stated in Sections 2(a) and 2(b) above, Recipient receives no rights or licenses to the intellectual property of any Contributor under this Agreement, whether expressly, by implication, estoppel or otherwise. All rights in the Program not expressly granted under this Agreement are reserved.

This Agreement is governed by the laws of the State of New York and the intellectual property laws of the United States of America. No party to this Agreement will bring a legal action under this Agreement more than one year after the cause of action arose. Each party waives its rights to a jury trial in any resulting litigation.