Establishing a Connection

Adding a Connection to Microsoft OneNote

To add a connection to Microsoft OneNote:

In the application console, navigate to the Connections page.
At the Add Connections panel, select the icon for the connection you want to add.
If the Microsoft OneNote icon is not available, click the Add More icon to download and install the Microsoft OneNote connector from the CData site.

For required properties, see the Settings tab.

For connection properties that are not typically required, see the Advanced tab.

Connecting to Microsoft OneNote

There are two authentication methods available for connecting to Microsoft OneNote data sources:

OAuth 2.0-based methods: Microsoft OneNote provides OAuth 2.0-based authentication via both Azure AD and Azure Service Principal.
- For Azure AD authentication, set AuthScheme to AzureAD.
- For Azure Service Principal authentication, set AuthScheme to AzureServicePrincipal.
Managed Service Identity (MSI) authentication. To use this method, set AuthScheme to AzureMSI.

The following subsections describe each authentication method in detail.

Azure AD

Azure AD is Microsoft’s multi-tenant, cloud-based directory and identity management service. It is user-based authentication that requires that you set AuthScheme to AzureAD.

Authentication to Azure AD over a Web application always requires the creation of a custom OAuth application .

For details about creating a custom OAuth application, see Creating a Custom Authentication App.

Azure Service Principal

Azure Service Principal is role-based application-based authentication. This means that authentication is done per application, rather than per user. All tasks taken on by the application are executed without a default user context, but based on the assigned roles. The application access to the resources is controlled through the assigned roles' permissions.

For information about how to set up Azure Service Principal authentication, see Creating an Azure AD App with Service Principal.

Managed Service Identity (MSI)

If you are running Microsoft OneNote on an Azure VM and want to automatically obtain Managed Service Identity (MSI) credentials to connect, set AuthScheme to AzureMSI.

User-Managed Identities

To obtain a token for a managed identity, use the OAuthClientId property to specify the managed identity's client_id.

If your VM has multiple user-assigned managed identities, you must also specify OAuthClientId.

Creating a Custom Authentication App

Creating an Azure AD Application

Microsoft OneNote supports user-based authentication using Azure AD. This authentication is OAuth-based.

CData embeds OAuth Application Credentials with CData branding that can be used when connecting to Microsoft OneNote via a desktop application or a headless machine. To connect to Microsoft OneNote via the Web, you must always create a custom application, as described here.

However, since custom Azure AD applications seamlessly support all three commonly-used authentication flows, you might want to create a custom application (use your own Azure AD Applications Credentials) for those other authentication flows.

Custom OAuth applications are useful if you want to:

Control branding of the authentication dialog.
Control the redirect URI that the application redirects the user to after the user authenticates.
Customize the permissions that you are requesting from the user.

Authenticating With Azure AD

In https://portal.azure.com:

In the left-hand navigation pane, select Azure Active Directory > App registrations.
Click New registration.
Enter a name for the application.
Specify the types of accounts this application should support:
- For private use applications, select Accounts in this organization directory only.
- For distributed applications, select one of the multi-tenant options.
Note: If you select Accounts in this organizational directory only (default), when you establish a connection with CData Sync App you must set AzureTenant to the Id of the Azure AD Tenant. Otherwise, the authentication attempt fails.
Set the redirect URI to http://localhost:33333 (default) OR, if you want to specify a different port, specify the desired port and set CallbackURL to the exact reply URL you just defined.
To register the new application, click Register. An application management screen displays. Record these values for later use. (You will use the Application (client) ID value to set the OAuthClientId parameter, and the Directory (tenant) ID value to set the AzureTenant parameter.)
Navigate to Certificates & Secrets. Select New Client Secret for this application and specify the desired duration. After the client secret is saved, the Azure App Registration displays the key value. This value is displayed only once, so record it for future use. (You will use it to set the OAuthClientSecret.)
Select the Microsoft Graph API, and the following delegated permissions allow access to the full functionality of the driver:
- Read and write all Notebooks, Sections, SectionGroups and Pages.
- Read all users.
- Read all groups.
If you have specified the use of permissions that require admin consent (such as the Application Permissions), you can grant them from the current tenant on the API Permissions page.

Creating an Azure AD Application

Microsoft OneNote supports user-based authentication using Azure AD. This authentication is OAuth-based.

CData embeds OAuth Application Credentials with CData branding that can be used when connecting to Microsoft OneNote via a desktop application or a headless machine. To connect to Microsoft OneNote via the Web, you must always create a custom application, as described here.

However, since custom Azure AD applications seamlessly support all three commonly-used authentication flows, you might want to create a custom application (use your own Azure AD Applications Credentials) for those other authentication flows.

Custom OAuth applications are useful if you want to:

Control branding of the authentication dialog.
Control the redirect URI that the application redirects the user to after the user authenticates.
Customize the permissions that you are requesting from the user.

Authenticating With Azure AD

In https://portal.azure.com:

In the left-hand navigation pane, select Azure Active Directory > App registrations.
Click New registration.
Enter a name for the application.
Specify the types of accounts this application should support:
- For private use applications, select Accounts in this organization directory only.
- For distributed applications, select one of the multi-tenant options.
Note: If you select Accounts in this organizational directory only (default), when you establish a connection with CData Sync App you must set AzureTenant to the Id of the Azure AD Tenant. Otherwise, the authentication attempt fails.
Set the redirect URI to http://localhost:33333 (default) OR, if you want to specify a different port, specify the desired port and set CallbackURL to the exact reply URL you just defined.
To register the new application, click Register. An application management screen displays. Record these values for later use. (You will use the Application (client) ID value to set the OAuthClientId parameter, and the Directory (tenant) ID value to set the AzureTenant parameter.)
Navigate to Certificates & Secrets. Select New Client Secret for this application and specify the desired duration. After the client secret is saved, the Azure App Registration displays the key value. This value is displayed only once, so record it for future use. (You will use it to set the OAuthClientSecret.)
Select the Microsoft Graph API, and the following delegated permissions allow access to the full functionality of the driver:
- Read and write all Notebooks, Sections, SectionGroups and Pages.
- Read all users.
- Read all groups.
If you have specified the use of permissions that require admin consent (such as the Application Permissions), you can grant them from the current tenant on the API Permissions page.

Administrative Tasks

The CData Sync App can be used to perform administrative tasks. This can be done by specifying the UserId column to execute CUD operations.

The UserId Column

Many tables expose a special UserId column. This is designed to be used by an administrator to modify records on another user's account. If you are not an administrator or do not desire this behavior, do not specify the UserId when performing an INSERT / UPDATE / DELETE operation. For instance, executing the following will insert a notebook for another user:

INSERT INTO Notebooks (displayName, UserId) VALUES ('Test Notebook', '12345')

The above request will have the overall effect of attempting to add a notebook under the resource at /users/12345/notebooks. When UserId is not specified, the resources affected will instead be modified under /users/me/notebooks. In general if you are not an administrator, you can only affect or view records under /users/me, so it is not recommended to set UserId when you are not an admin.

Advanced Features

This section details a selection of advanced features of the Microsoft OneNote Sync App.

User Defined Views

The Sync App supports the use of user defined views, virtual tables whose contents are decided by a pre-configured user defined query. These views are useful when you cannot directly control queries being issued to the drivers. For an overview of creating and configuring custom views, see User Defined Views .

SSL Configuration

Use SSL Configuration to adjust how Sync App handles TLS/SSL certificate negotiations. You can choose from various certificate formats;. For further information, see the SSLServerCert property under "Connection String Options" .

Firewall and Proxy

Configure the Sync App for compliance with Firewall and Proxy, including Windows proxies and HTTP proxies. You can also set up tunnel connections.

Query Processing

The Sync App offloads as much of the SELECT statement processing as possible to Microsoft OneNote and then processes the rest of the query in memory (client-side).

For further information, see Query Processing.

Logging

For an overview of configuration settings that can be used to refine CData logging, see Logging. Only two connection properties are required for basic logging, but there are numerous features that support more refined logging, which enables you to use the LogModules connection property to specify subsets of information to be logged.

SSL Configuration

Customizing the SSL Configuration

By default, the Sync App attempts to negotiate TLS with the server. The server certificate is validated against the default system trusted certificate store. You can override how the certificate gets validated using the SSLServerCert connection property.

To specify another certificate, see the SSLServerCert connection property.

Firewall and Proxy

Connecting Through a Firewall or Proxy

HTTP Proxies

To authenticate to an HTTP proxy, set the following:

ProxyServer: the hostname or IP address of the proxy server that you want to route HTTP traffic through.
ProxyPort: the TCP port that the proxy server is running on.
ProxyAuthScheme: the authentication method the Sync App uses when authenticating to the proxy server.
ProxyUser: the username of a user account registered with the proxy server.
ProxyPassword: the password associated with the ProxyUser.

Other Proxies

Set the following properties:

To use a proxy-based firewall, set FirewallType, FirewallServer, and FirewallPort.
To tunnel the connection, set FirewallType to TUNNEL.
To authenticate, specify FirewallUser and FirewallPassword.
To authenticate to a SOCKS proxy, additionally set FirewallType to SOCKS5.

Data Model

Overview

This section shows the available API objects and provides more information on executing SQL to Microsoft OneNote APIs.

Key Features

The Sync App models Microsoft OneNote entities like users and groups as relational views, entities like notebooks, sections, section groups and pages as relational tables, allowing you to write SQL to query Microsoft OneNote data.
Stored procedures allow you to execute operations to Microsoft OneNote, including retrieving the access token and keeping it refreshed in OAuth 2.0.
Live connectivity to these objects means any changes to your Microsoft OneNote account are immediately reflected when using the Sync App.

Views

Views describes the available views. Views are statically defined to model Users and Groups.

Tables

Tables describes the available tables. Tables are statically defined to model Notebooks, SectionGroups, Sections and Pages.

Stored Procedures

Stored Procedures are function-like interfaces to OneNote. They can be used to search, create, and modify information in OneNote.

Tables

The Sync App models the data in Microsoft OneNote as a list of tables in a relational database that can be queried using standard SQL statements.

Microsoft OneNote Connector for CData Sync Tables


Name	Description
Notebooks	Retrieves all Notebooks for the authenticated user.
SectionGroups	Retrieves all SectionGroups accross notebooks for the authenticated user.
Sections	Retrieves all Sections accross notebooks for the authenticated user.

Notebooks

Retrieves all Notebooks for the authenticated user.

Table Specific Information

Select

Most filters are handled server side, but the specific fields of Id, UserId, GroupId and SiteId will change the endpoint we use to retrieve the data. They must be specified with an '=' or IN condition. For example:

SELECT * FROM Notebooks WHERE Id = '1-56e2fc02-f3dd-4f82-82fb-519bc4807935'
SELECT * FROM Notebooks WHERE Id IN ('1-56e2fc02-f3dd-4f82-82fb-519bc4807935', '1-56e2fc02-f3dd-4f82-fvgf-dfsdf4807935')
SELECT * FROM Notebooks WHERE UserId = '9525a3f1-aa40-4f17-a97b-68606d118adf'
SELECT * FROM Notebooks WHERE GroupId = '044d385d-6ca8-4d81-800d-223124b651db'
SELECT * FROM Notebooks WHERE SiteId = 'rssbuscrm.sharepoint.com,9839b8a3-343a-4064-996a-d2a300bc559f,2b6cda85-3573-4578-ae76-dfdde60c771b'

Insert

The column required to perform an Insert operation on Notebooks table is DisplayName. If the INSERT operation is done on behalf of a group or user then UserId or GroupId should also be specified. The following examples illustrate an Insert operation on Notebooks:

INSERT INTO Notebooks (DisplayName) VALUES ('Getting started')
INSERT INTO Notebooks (DisplayName, UserId) VALUES ('Getting started', '9525a3f1-aa40-4f17-a97b-68606d118adf')
INSERT INTO Notebooks (DisplayName, GroupId) VALUES ('Getting started', '044d385d-6ca8-4d81-800d-223124b651db')

Columns


Name	Type	ReadOnly	Description
id [KEY]	String	True	The id of the notebook.
self	String	False	The self of the notebook.
createdDateTime	Datetime	False	The created DateTime of the notebook.
createdBy_application_displayName	String	False	The createdBy_application_displayName of the notebook.
createdBy_application_id	String	False	The createdBy_application_id of the notebook.
displayName	String	False	The display name of the notebook.
lastModifiedBy_application_displayName	String	False	The lastModifiedBy_application_displayName of the notebook.
lastModifiedBy_application_id	String	False	The lastModifiedBy_application_id of the notebook.
lastModifiedDateTime	Datetime	False	The lastModified DateTime of the notebook.
isDefault	Bool	False	Indicator if notebook is default.
isShared	Bool	False	Indicator if notebook is shared.
links_oneNoteClientUrl_href	String	False	The links_oneNoteClientUrl_href of the notebook.
sectionGroupsUrl	String	False	The sectionGroups Url of the notebook.
sectionsUrl	String	False	The sectionsUrl of the notebook.
userRole	String	False	The userRole of the notebook.
createdBy_user_displayName	String	False	The createdBy user displayName of the notebook
createdBy_user_id	String	False	The createdBy user id of the notebook
UserId	String	False	The userId that the authenticated user is impersonating.
GroupId	String	False	The groupId that the authenticated user is impersonating.
SiteId	String	False	The Id of the Site.

SectionGroups

Retrieves all SectionGroups accross notebooks for the authenticated user.

Table Specific Information

Select

Most filters are handled server side, but the specific fields of Id, UserId, GroupId, SiteId and ParentNotebookId will change the endpoint we use to retrieve the data. They must be specified with an '=' or IN condition. For example:

SELECT * FROM SectionGroups WHERE Id = '1-56e2fc02-f3dd-4f82-82fb-519bc4807935'
SELECT * FROM SectionGroups WHERE ParentNotebookId = '1-2342423-1234-3424-82fb-519bc4807935'
SELECT * FROM SectionGroups WHERE Id IN ('1-56e2fc02-f3dd-4f82-82fb-519bc4807935', '1-sdcgw3324-f3dd-5678-derf-519bc4807935')
SELECT * FROM SectionGroups WHERE ParentNotebookId IN ('1-56e2fc02-f3dd-4f82-82fb-519bc4807935', '1-sdcgw3324-f3dd-5678-derf-519bc4807935')
SELECT * FROM SectionGroups WHERE UserId = '9525a3f1-aa40-4f17-a97b-68606d118adf'
SELECT * FROM SectionGroups WHERE GroupId = '044d385d-6ca8-4d81-800d-223124b651db'
SELECT * FROM SectionGroups WHERE SiteId = 'cdata0.sharepoint.com,0a40f113-9f39-459d-a22a-9cc88b46f031,dd4add46-e9ed-4ed8-b479-d55d0721bc7f'

Insert

The columns required to perform an Insert operation on SectionGroups table is DisplayName and ParentNotebookId. If the INSERT operation is done on behalf of a group or user then UserId or GroupId should also be specified. The following examples illustrate an Insert operation on SectionGroups:

INSERT INTO SectionGroups (DisplayName, ParentNotebookId) VALUES ('Getting started', '1-5c57790b-73c3-4996-940e-07c3f2157571')
INSERT INTO SectionGroups (DisplayName, ParentNotebookId, UserId) VALUES ('Getting started', '1-5c57790b-73c3-4996-940e-07c3f2157571', '9525a3f1-aa40-4f17-a97b-68606d118adf')
INSERT INTO SectionGroups (DisplayName, ParentNotebookId, GroupId) VALUES ('Getting started', '1-5c57790b-73c3-4996-940e-07c3f2157571', '044d385d-6ca8-4d81-800d-223124b651db')

Columns


Name	Type	ReadOnly	Description
id [KEY]	String	True	The id of the section group.
self	String	False	The self of the section group.
createdDateTime	Datetime	False	The createdDateTime of the section group.
createdBy_application_displayName	String	False	The createdBy_application_displayName of the section group.
createdBy_application_id	String	False	The createdBy_application_id of the section group.
displayName	String	False	The displayName of the section group.
lastModifiedBy_application_displayName	String	False	The lastModifiedBy_application_displayName of the section group.
lastModifiedBy_application_id	String	False	The lastModifiedBy_application_id of the section group.
lastModifiedDateTime	Datetime	False	The lastModifiedDateTime of the section group.
sectionGroupsUrl	String	False	The sectionGroupsUrl of the section group.
sectionsUrl	String	False	The sectionsUrl of the section group.
ParentNotebookId	String	False	The ParentNotebookId of the section group.
ParentSectionGroupId	String	False	The ParentSectionGroupId of the section group.
createdBy_user_displayName	String	False	The createdBy_user_displayName of the section group.
createdBy_user_id	String	False	The createdBy_user_id of the section group.
UserId	String	False	The userId that the authenticated user is impersonating.
GroupId	String	False	The groupId that the authenticated user is impersonating.
SiteId	String	False	The Id of the Sharepoint Site.

Sections

Retrieves all Sections accross notebooks for the authenticated user.

Table Specific Information

Select

Most filters are handled server side, but the specific fields of Id, UserId, GroupId, SiteId, ParentNotebookId and ParentSectionGroupId will change the endpoint we use to retrieve the data. They must be specified with an '=' or IN condition. For example:

SELECT * FROM Sections WHERE Id = '1-56e2fc02-f3dd-4f82-82fb-519bc4807935'
SELECT * FROM Sections WHERE ParentNotebookId = '1-56e2fc02-f3dd-4f82-82fb-519bc4807935'
SELECT * FROM Sections WHERE ParentSectionGroupId = '1-56e2fc02-f3dd-4f82-82fb-519bc4807935'
SELECT * FROM Sections WHERE Id IN ('1-56e2fc02-f3dd-4f82-82fb-519bc4807935', '1-23423-f3dd-rtsd-gfds-4353423fsdf')
SELECT * FROM Sections WHERE ParentNotebookId IN ('1-56e2fc02-f3dd-4f82-82fb-519bc4807935', '1-23423-f3dd-rtsd-gfds-4353423fsdf')
SELECT * FROM Sections WHERE ParentSectionGroupId IN ('1-56e2fc02-f3dd-4f82-82fb-519bc4807935', '1-23423-f3dd-rtsd-gfds-4353423fsdf')
SELECT * FROM Sections WHERE UserId = '9525a3f1-aa40-4f17-a97b-68606d118adf'
SELECT * FROM Sections WHERE GroupId = '044d385d-6ca8-4d81-800d-223124b651db'
SELECT * FROM Sections WHERE SiteId = 'cdata0.sharepoint.com,0a40f113-9f39-459d-a22a-9cc88b46f031,dd4add46-e9ed-4ed8-b479-d55d0721bc7f'

Insert

The columns required to perform an Insert operation on Sections table is DisplayName and ParentNotebookId. If the INSERT operation is done on behalf of a group or user then UserId or GroupId should also be specified. The following examples illustrate an Insert operation on Sections:

INSERT INTO Sections (DisplayName, ParentNotebookId) VALUES ('Getting started', '1-5c57790b-73c3-4996-940e-07c3f2157571')
INSERT INTO Sections (DisplayName, ParentNotebookId, UserId) VALUES ('Getting started', '1-5c57790b-73c3-4996-940e-07c3f2157571', '9525a3f1-aa40-4f17-a97b-68606d118adf')
INSERT INTO Sections (DisplayName, ParentNotebookId, GroupId) VALUES ('Getting started', '1-5c57790b-73c3-4996-940e-07c3f2157571', '044d385d-6ca8-4d81-800d-223124b651db')

Columns


Name	Type	ReadOnly	Description
id [KEY]	String	True	The id of the section.
self	String	False	The self of the section.
createdDateTime	Datetime	False	The createdDateTime of the section.
createdBy_application_displayName	String	False	The createdBy_application_displayName of the section.
createdBy_application_id	String	False	The createdBy_application_id of the section.
displayName	String	False	The displayName of the section.
lastModifiedBy_application_displayName	String	False	The lastModifiedBy_application_displayName of the section.
lastModifiedBy_application_id	String	False	The lastModifiedBy_application_id of the section.
lastModifiedDateTime	Datetime	False	The lastModifiedDateTime of the section.
isDefault	Bool	False	The isDefault of the section.
links_oneNoteClientUrl_href	String	False	The links_oneNoteClientUrl_href of the section.
pagesUrl	String	False	The pagesUrl of the section.
ParentNotebookId	String	False	The ParentNotebookId of the section.
ParentSectionGroupId	String	False	The ParentSectionGroupId of the section.
createdBy_user_displayName	String	False	The createdBy_user_displayName of the section.
createdBy_user_id	String	False	The createdBy_user_id of the section.
UserId	String	False	The userId that the authenticated user is impersonating.
GroupId	String	False	The groupId that the authenticated user is impersonating.
SiteId	String	False	The Id of the Sharepoint Site.

Views

Views are similar to tables in the way that data is represented; however, views are read-only.

Queries can be executed against a view as if it were a normal table.

Microsoft OneNote Connector for CData Sync Views


Name	Description
Groups	Retrieves all Azure Active Directory (Azure AD) groups, which can be Office 365 groups, or security groups.
Pages	Retrieves all Pages accross notebooks for the authenticated user.
PagesContent	Retrieves the content for the pages
Sites	Retrieves all sites for the authenticated user.
Users	Retrieves all Azure AD user accounts within the authenticated permissions.

Groups

Retrieves all Azure Active Directory (Azure AD) groups, which can be Office 365 groups, or security groups.

Table Specific Information

Groups require Administrator permissions. To work with them, you must create your own custom OAuth App and set the appropriate OAuthClientId and OAuthClientSecret. In this app, you must configure it to request the Group.Read.All permission. This can be done at https://apps.dev.microsoft.com, or in the App Registrations panel at http://portal.azure.com. See Creating a Custom Authentication App for more details on creating a custom app.

To authorize Groups permissions, an administrator must grant the Groups permissions for your organization at large. This can be done via the administrator authorization endpoint. Simply have the administrator navigate to the following web page and grant permissions. Then run the OAuth authorization as normal afterwards.

https://login.microsoftonline.com/common/adminconsent?client_id=[YourClientId]&redirect_uri=http://localhost:33333

Select

Most filters are handled server side, but the specific field of Id will change the endpoint we use to retrieve the data. It must be specified with an '=' or IN condition. For example:

SELECT * FROM Groups WHERE Id = '616391f0-32d8-4127-8f25-aa55771d6617'
SELECT * FROM Groups WHERE Id IN ('616391f0-32d8-4127-8f25-aa55771d6617', 'dfgd4rw3-5rvg-76hy-tr5t-aa55771d6617')

Columns


Name	Type	Description
ParentReference	String	The Parent Reference of the group.
id [KEY]	String	The Id of the group.
deletedDateTime	Datetime	The datetime when the group was deleted.
allowExternalSenders	Bool	The indicator showing if external senders should be allowed or not.
assignedLabels	String	The assigned labels of the group
assignedLicenses	String	The assigned licenses of the group.
autoSubscribeNewMembers	Bool	The indicator showing if new members should be autosubscribed.
classification	String	The classification of the group.
createdDateTime	Datetime	The created DateTime of the group.
description	String	The description of the group.
displayName	String	The display name of the group.
expirationDateTime	Datetime	The expiration datetime of the group.
groupTypes	String	The types of the group.
hasMembersWithLicenseErrors	Bool	Indicator if there are members with license error.
hideFromAddressLists	Bool	The hide From AddressLists of the group.
hideFromOutlookClients	Bool	The hide From OutlookClients of the group.
isArchived	Bool	Indicator if group is archived.
isSubscribedByMail	Bool	Indicator if group is subscribed by email.
licenseProcessingState_state	String	The license processing state of the group.
mail	String	The mail of the group.
mailEnabled	Bool	Indicator if mail is enabled in the group.
mailNickname	String	The mail nickname of the group.
membershipRule	String	The membership rule of the group.
membershipRuleProcessingState	String	The membership rule processing state of the group.
onPremisesDomainName	String	The domain name of the group.
onPremisesLastSyncDateTime	Datetime	The LastSync DateTime of the group.
onPremisesNetBiosName	String	The Net Bios Name of the group.
onPremisesProvisioningErrors	String	The provisioning errors of the group.
onPremisesSamAccountName	String	The Sam Account Name of the group.
onPremisesSecurityIdentifier	String	The security identifier of the group.
onPremisesSyncEnabled	Bool	Indicator if sync is enabled in the group.
preferredDataLocation	String	The preferred data location of the group.
preferredLanguage	String	preferred language in the group.
proxyAddresses	String	The proxy addresses of the group.
renewedDateTime	Datetime	The renewed DateTime of the group.
securityEnabled	Bool	Indicator if security is enabled in the group.
securityIdentifier	String	The security identifier of the group.
theme	String	The theme of the group.
unseenCount	Int	The unseen count of the group.
visibility	String	The visibility of the group.

Pages

Retrieves all Pages accross notebooks for the authenticated user.

Table Specific Information

Select

Most filters are handled server side, but the specific fields of Id, ParentSectionId, UserId, GroupId or SiteId will change the endpoint we use to retrieve the data. They must be specified with an '=' or IN condition. For example:

SELECT * FROM Pages WHERE Id = '1-e8992fa8e5254df387d062d04e75a6e7!6-e8341f6e-75b1-4811-8bb4-d2069c7f7a2d'
SELECT * FROM Pages WHERE Id IN ('1193-dsdda-9392-4706514c636b', '1193-dsdda-9392-sdfasdw33324')
SELECT * FROM Pages WHERE ParentSectionId = '1-e8341f6e-75b1-4811-8bb4-d2069c7f7a2d'
SELECT * FROM Pages WHERE ParentSectionId = '1-e8341f6e-75b1-4811-8bb4-d2069c7f7a2d' AND UserId = '92dfdfc6-f1d4-4965-9f71-30e4da4fa7fe'
SELECT * FROM Pages WHERE ParentSectionId = '1-e8341f6e-75b1-4811-8bb4-d2069c7f7a2d' AND GroupId = '1772bb5a-f8e9-405d-a90b-eac11b0b9b9a'
SELECT * FROM Pages WHERE GroupId = 'acabe397-8370-4c31-aeb7-2d7ae6b8cda1'
SELECT * FROM Pages WHERE UserId = '92dfdfc6-f1d4-4965-9f71-30e4da4fa7fe'
SELECT * FROM Pages WHERE SiteId = 'cdata0.sharepoint.com,0a40f113-9f39-459d-a22a-9cc88b46f031,dd4add46-e9ed-4ed8-b479-d55d0721bc7f'

Columns


Name	Type	Description
id [KEY]	String	The id of the page.
self	String	The self of the page.
createdDateTime	Datetime	The createdDateTime of the page.
contentUrl	String	The contentUrl of the page.
createdByAppId	String	The createdByAppId of the page.
lastModifiedDateTime	Datetime	The lastModifiedDateTime of the page.
level	Int	The level of the page.
links_oneNoteClientUrl_href	String	The links_oneNoteClientUrl_href of the page
order	Int	The order of the page.
title	String	The title of the page.
userTags	String	The userTags of the page.
ParentSectionId	String	The ParentSectionId of the page.
UserId	String	The userId that the authenticated user is impersonating.
GroupId	String	The groupId that the authenticated user is impersonating.
SiteId	String	The Id of the Sharepoint site.

PagesContent

Retrieves the content for the pages

Table Specific Information

Select

Most filters are handled server side, but the specific fields of PageId, UserId, GroupId or SiteId will change the endpoint we use to retrieve the data. They must be specified with an '=' or IN condition. For example:

SELECT * FROM PagesContent WHERE PageId = '1-396658ffc20744bcb716bdd972cc3bfb!1-26d8f808-d809-4df0-a292-d79499d870d'
SELECT * FROM PagesContent where PageId IN ('1-396658ffc20744bcb716bdd972cc3bfb!1-26d8f808-d809-4df0-a292-d79499d870d7', '1-3c0db927dab643d0bbe402f79e6be51f!1-11a54aa2-2105-4d7b-92c3-6e448fbadcc7', '1-a4375ec1f6cd4183ae142bd1fc54859c!1-11a54aa2-2105-4d7b-92c3-6e448fbadcc7')
SELECT * FROM PagesContent WHERE PageId IN (SELECT Id from Pages WHERE UserId = '92dfdfc6-f1d4-4965-9f71-30e4da4fa7fe') AND UserId = '92dfdfc6-f1d4-4965-9f71-30e4da4fa7fe'
SELECT * FROM PagesContent WHERE UserId = '92dfdfc6-f1d4-4965-9f71-30e4da4fa7fe'
SELECT * FROM PagesContent WHERE SiteId = 'cdata0.sharepoint.com,0a40f113-9f39-459d-a22a-9cc88b46f031,dd4add46-e9ed-4ed8-b479-d55d0721bc7f'

Columns


Name	Type	Description
PageId	String	The id of the page.
Content	String	The html content of the page.
UserId	String	The id of the user.
GroupId	String	The id of the group.
SiteId	String	The id of the site.

Sites

Retrieves all sites for the authenticated user.

Columns


Name	Type	Description
Id [KEY]	String	The full identifier of the site.
SiteId	String	The unique identifier of the site collection.
WebId	String	The Web Id of the site.
SiteName	String	The name of the site.
Title	String	The title of the site.
SiteDescription	String	The description of the site.
Description	String	The description of the item.
CreatedDateTime	Datetime	Date and time the site was created.
LastModifiedDateTime	Datetime	Date and time the site was last modified.
SPWebUrl	String	URL that displays the resource in the browser.
Author	String	The author of the site.
DocumentSignature	String	The document signature of the site.
FileExtension	String	The extension of the site's file.
SecondaryFileExtension	String	The secondary extension of the site's file.
FileType	String	The file type of the site.
DocId	Long	The unique identifier of the site within a geo location.
GeoLocationSource	String	The geo location of the site.
HitHighlightedSummary	String	The heighted summary of the site.
Importance	Long	The importance of the site.
IsContainer	Bool	Specifies whether the site is a folder.
IsDocument	Bool	Specifies whether the site is a document.
OriginalPath	String	The original site path.
Path	String	The current site path.
Rank	Double	The rank of the site.
RenderTemplateId	String	The site's control render template name.
SiteLogo	String	The URI of the site's logo.
ViewsLifeTime	Long	The total view count since the site was created.
ViewsRecent	Long	The total view count of the site in the last 14 days.
WebTemplate	String	The web temple from which the site is created.

Users

Retrieves all Azure AD user accounts within the authenticated permissions.

Table Specific Information

Users require Administrator permissions. To work with them, you must create your own custom OAuth App and set the appropriate OAuthClientId and OAuthClientSecret. In this app, you must configure it to request the User.Read.All permission. This can be done at https://apps.dev.microsoft.com, or in the App Registrations panel at http://portal.azure.com. See Creating a Custom Authentication App for more details on creating a custom app.

To authorize User permissions, an administrator must grant the Users permissions for your organization at large. This can be done via the administrator authorization endpoint. Simply have the administrator navigate to the following web page and grant permissions. Then run the OAuth authorization as normal afterwards.

https://login.microsoftonline.com/common/adminconsent?client_id=[YourClientId]&redirect_uri=http://localhost:33333

Select

Most filters are handled server side, but the specific field of Id will change the endpoint we use to retrieve the data. It must be specified with an '=' or IN condition. For example:

SELECT * FROM Users WHERE Id = '616391f0-32d8-4127-8f25-aa55771d6617'
SELECT * FROM Users WHERE Id IN ('616391f0-32d8-4127-8f25-aa55771d6617', 'dfgd4rw3-5rvg-76hy-tr5t-aa55771d6617')

Columns


Name	Type	Description
id [KEY]	String	The id of the user.
deletedDateTime	Datetime	The deletedDateTime of the user.
aboutMe	String	The aboutMe of the user.
accountEnabled	Bool	Indicates if accountEnabled for the user.
ageGroup	String	The ageGroup of the user.
assignedLicenses	String	The assignedLicenses of the user.
assignedPlans	String	The assignedPlans of the user.
birthday	Datetime	The birthday of the user.
businessPhones	String	The businessPhones of the user.
city	String	The city of the user.
companyName	String	The companyName of the user.
consentProvidedForMinor	String	The consentProvidedForMinor of the user.
country	String	The country of the user.
createdDateTime	Datetime	The createdDateTime of the user.
creationType	String	The creationType of the user.
department	String	The department of the user.
deviceEnrollmentLimit	Int	The deviceEnrollmentLimit of the user.
displayName	String	The displayName of the user.
employeeHireDate	Datetime	The employeeHireDate of the user.
employeeId	String	The employeeId of the user.
employeeOrgData_costCenter	String	The employeeOrgData_costCenter of the user.
employeeOrgData_division	String	The employeeOrgData_division of the user.
employeeType	String	The employeeType of the user.
externalUserState	String	The externalUserState of the user.
externalUserStateChangeDateTime	Datetime	The externalUserStateChangeDateTime of the user.
faxNumber	String	The faxNumber of the user.
givenName	String	The givenName of the user.
hireDate	Datetime	The hireDate of the user.
identities	String	The identities of the user.
imAddresses	String	The imAddresses of the user.
interests	String	The interests of the user.
isResourceAccount	Bool	Indicates if it isResourceAccount of the user.
jobTitle	String	The jobTitle of the user.
lastPasswordChangeDateTime	Datetime	The lastPasswordChangeDateTime of the user.
legalAgeGroupClassification	String	The legalAgeGroupClassification of the user.
licenseAssignmentStates	String	The licenseAssignmentStates of the user.
mail	String	The mail of the user.
mailboxSettings_archiveFolder	String	The mailboxSettings_archiveFolder of the user.
mailboxSettings_automaticRepliesSetting_externalAudience	String	The mailboxSettings_automaticRepliesSetting_externalAudience of the user.
mailboxSettings_automaticRepliesSetting_externalReplyMessage	String	The mailboxSettings_automaticRepliesSetting_externalReplyMessage of the user.
mailboxSettings_automaticRepliesSetting_internalReplyMessage	String	The mailboxSettings_automaticRepliesSetting_internalReplyMessage of the user.
mailboxSettings_automaticRepliesSetting_scheduledEndDateTime_dateTime	Datetime	The mailboxSettings_automaticRepliesSetting_scheduledEndDateTime_dateTime of the user.
mailboxSettings_automaticRepliesSetting_scheduledEndDateTime_timeZone	String	The mailboxSettings_automaticRepliesSetting_scheduledEndDateTime_timeZone of the user.
mailboxSettings_automaticRepliesSetting_status	String	The mailboxSettings_automaticRepliesSetting_status of the user.
mailboxSettings_dateFormat	String	The mailboxSettings_dateFormat of the user.
mailboxSettings_delegateMeetingMessageDeliveryOptions	String	The mailboxSettings_delegateMeetingMessageDeliveryOptions of the user.
mailboxSettings_language_displayName	String	The mailboxSettings_language_displayName of the user.
mailboxSettings_language_locale	String	The mailboxSettings_language_locale of the user.
mailboxSettings_timeFormat	String	The mailboxSettings_timeFormat of the user.
mailboxSettings_timeZone	String	The mailboxSettings_timeZone of the user.
mailboxSettings_workingHours_daysOfWeek	String	The mailboxSettings_workingHours_daysOfWeek of the user.
mailboxSettings_workingHours_endTime	Time	The mailboxSettings_workingHours_endTime of the user.
mailboxSettings_workingHours_startTime	Time	The mailboxSettings_workingHours_startTime of the user.
mailboxSettings_workingHours_timeZone_name	String	The mailboxSettings_workingHours_timeZone_name of the user.
mailNickname	String	The mailNickname of the user.
mobilePhone	String	The mobilePhone of the user.
mySite	String	The mySite of the user.
officeLocation	String	The officeLocation of the user.
onPremisesDistinguishedName	String	The onPremisesDistinguishedName of the user.
onPremisesDomainName	String	The onPremisesDomainName of the user.
onPremisesExtensionAttributes_extensionAttribute1	String	The onPremisesExtensionAttributes_extensionAttribute1 of the user.
onPremisesExtensionAttributes_extensionAttribute10	String	The onPremisesExtensionAttributes_extensionAttribute10 of the user.
onPremisesExtensionAttributes_extensionAttribute11	String	The onPremisesExtensionAttributes_extensionAttribute11 of the user.
onPremisesExtensionAttributes_extensionAttribute12	String	The onPremisesExtensionAttributes_extensionAttribute12 of the user.
onPremisesExtensionAttributes_extensionAttribute13	String	The onPremisesExtensionAttributes_extensionAttribute13 of the user.
onPremisesExtensionAttributes_extensionAttribute14	String	The onPremisesExtensionAttributes_extensionAttribute14 of the user.
onPremisesExtensionAttributes_extensionAttribute15	String	The onPremisesExtensionAttributes_extensionAttribute15 of the user.
onPremisesExtensionAttributes_extensionAttribute2	String	The onPremisesExtensionAttributes_extensionAttribute2 of the user.
onPremisesExtensionAttributes_extensionAttribute3	String	The onPremisesExtensionAttributes_extensionAttribute3 of the user.
onPremisesExtensionAttributes_extensionAttribute4	String	The onPremisesExtensionAttributes_extensionAttribute4 of the user.
onPremisesExtensionAttributes_extensionAttribute5	String	The onPremisesExtensionAttributes_extensionAttribute5 of the user.
onPremisesExtensionAttributes_extensionAttribute6	String	The onPremisesExtensionAttributes_extensionAttribute6 of the user.
onPremisesExtensionAttributes_extensionAttribute7	String	The onPremisesExtensionAttributes_extensionAttribute7 of the user.
onPremisesExtensionAttributes_extensionAttribute8	String	The onPremisesExtensionAttributes_extensionAttribute8 of the user.
onPremisesExtensionAttributes_extensionAttribute9	String	The onPremisesExtensionAttributes_extensionAttribute9 of the user.
onPremisesImmutableId	String	The onPremisesImmutableId of the user.
onPremisesLastSyncDateTime	Datetime	The onPremisesLastSyncDateTime of the user.
onPremisesProvisioningErrors	String	The onPremisesProvisioningErrors of the user.
onPremisesSamAccountName	String	The onPremisesSamAccountName of the user.
onPremisesSecurityIdentifier	String	The onPremisesSecurityIdentifier of the user.
onPremisesSyncEnabled	Bool	Indicates onPremisesSyncEnabled for the user.
onPremisesUserPrincipalName	String	The onPremisesUserPrincipalName of the user.
otherMails	String	The otherMails of the user.
passwordPolicies	String	The passwordPolicies of the user.
passwordProfile_forceChangePasswordNextSignIn	Bool	Indicate passwordProfile_forceChangePasswordNextSignIn for the user.
passwordProfile_forceChangePasswordNextSignInWithMfa	Bool	Indicate passwordProfile_forceChangePasswordNextSignInWithMfa for the user.
passwordProfile_password	String	The passwordProfile_password of the user.
pastProjects	String	The pastProjects of the user.
postalCode	String	The postalCode of the user.
preferredLanguage	String	The preferredLanguage of the user.
preferredName	String	The preferredName of the user.
provisionedPlans	String	The provisionedPlans of the user.
proxyAddresses	String	The proxyAddresses of the user.
responsibilities	String	The responsibilities of the user.
schools	String	The schools of the user.
showInAddressList	Bool	Indicate showInAddressList of the user.
signInSessionsValidFromDateTime	Datetime	The signInSessionsValidFromDateTime of the user.
skills	String	The skills of the user.
state	String	The state of the user.
streetAddress	String	The streetAddress of the user.
surname	String	The surname of the user.
usageLocation	String	The usageLocation of the user.
userPrincipalName	String	The userPrincipalName of the user.
userType	String	The userType of the user.
ParentReference	String	The ParentReference of the user.

Data Type Mapping

Data Type Mappings

The Sync App maps types from the data source to the corresponding data type available in the schema. The table below documents these mappings.


Microsoft OneNote (OData V4)	CData Schema
Edm.Binary	binary
Edm.Boolean	bool
Edm.Date	datetime
Edm.DateTimeOffset	datetime
Edm.Decimal	decimal
Edm.Double	double
Edm.Guid	guid
Edm.Int32	int
Edm.String	string
Edm.TimeOfDay	time

Connection String Options

The connection string properties are the various options that can be used to establish a connection. This section provides a complete list of the options you can configure in the connection string for this provider. Click the links for further details.

For more information on establishing a connection, see Establishing a Connection.

Authentication

Property	Description
AuthScheme	Specifies the type of authentication to use when connecting to Microsoft OneNote. If this property is left blank, the default authentication is used.

Connection

Property

Description

IncludeSharePointSites

Whether to retrieve drives for all SharePoint sites when querying Drives view. If 'true' the provider will retrieve all Site IDs recursively and for each of them issue a separate call to get their drives. Therefore, be aware that setting this property to 'true' may decrease performance for the Drives view. Note that the SharePointAccessToken or OAuthJWTCert connection property must be specified to query the SharePointSites view and other views if IncludeSharePointSites is set to 'true' when using the CLIENT OAuthGrantType or the AzureServicePrincipal AuthScheme.

Azure Authentication

Property	Description
AzureTenant	Identifies the Microsoft OneNote tenant being used to access data, either by name (for example, contoso.omnicrosoft.com) or ID. (Conditional).
AzureEnvironment	Specifies the Azure network environment to which you will connect. Must be the same network to which your Azure account was added.

OAuth

Property	Description
OAuthClientId	Specifies the client Id that was assigned the custom OAuth application was created. (Also known as the consumer key.) This ID registers the custom application with the OAuth authorization server.
OAuthClientSecret	Specifies the client secret that was assigned when the custom OAuth application was created. (Also known as the consumer secret ). This secret registers the custom application with the OAuth authorization server.
OAuthGrantType	Specifies the grant type for the chosen OAuth flow. This value should be the same as the grant_type that was set during OAuth custom application creation.

JWT OAuth

Property	Description
OAuthJWTCert	The JWT Certificate store.
OAuthJWTCertType	The type of key store containing the JWT Certificate.
OAuthJWTCertPassword	The password for the OAuth JWT certificate used to access a certificate store that requires a password. If the certificate store does not require a password, leave this property blank.
OAuthJWTCertSubject	The subject of the OAuth JWT certificate used to locate a matching certificate in the store. Supports partial matches and the wildcard '*' to select the first certificate.

SSL

Property	Description
SSLServerCert	Specifies the certificate to be accepted from the server when connecting using TLS/SSL.

Firewall

Property	Description
FirewallType	Specifies the protocol the provider uses to tunnel traffic through a proxy-based firewall.
FirewallServer	Identifies the IP address, DNS name, or host name of a proxy used to traverse a firewall and relay user queries to network resources.
FirewallPort	Specifies the TCP port to be used for a proxy-based firewall.
FirewallUser	Identifies the user ID of the account authenticating to a proxy-based firewall.
FirewallPassword	Specifies the password of the user account authenticating to a proxy-based firewall.

Proxy

Property	Description
ProxyAutoDetect	Specifies whether the provider checks your system proxy settings for existing proxy server configurations, rather than using a manually specified proxy server.
ProxyServer	The hostname or IP address of the proxy server that you want to route HTTP traffic through.
ProxyPort	The TCP port on your specified proxy server (set in the ProxyServer connection property) that has been reserved for routing HTTP traffic to and from the client.
ProxyAuthScheme	Specifies the authentication method the provider uses when authenticating to the proxy server specified in the ProxyServer connection property.
ProxyUser	The username of a user account registered with the proxy server specified in the ProxyServer connection property.
ProxyPassword	The password associated with the user specified in the ProxyUser connection property.
ProxySSLType	The SSL type to use when connecting to the proxy server specified in the ProxyServer connection property.
ProxyExceptions	A semicolon separated list of destination hostnames or IPs that are exempt from connecting through the proxy server set in the ProxyServer connection property.

Logging

Property	Description
LogModules	Specifies the core modules to include in the log file. Use a semicolon-separated list of module names. By default, all modules are logged.

Schema

Property	Description
Location	Specifies the location of a directory containing schema files that define tables, views, and stored procedures. Depending on your service's requirements, this may be expressed as either an absolute path or a relative path.
BrowsableSchemas	Optional setting that restricts the schemas reported to a subset of all available schemas. For example, BrowsableSchemas=SchemaA,SchemaB,SchemaC .
Tables	Optional setting that restricts the tables reported to a subset of all available tables. For example, Tables=TableA,TableB,TableC .
Views	Optional setting that restricts the views reported to a subset of the available tables. For example, Views=ViewA,ViewB,ViewC .

Miscellaneous

Property	Description
GroupId	Specify this GroupId in order to access the OneNote documents for this group.
MaxRows	Specifies the maximum rows returned for queries without aggregation or GROUP BY.
Other	Specifies additional hidden properties for specific use cases. These are not required for typical provider functionality. Use a semicolon-separated list to define multiple properties.
PseudoColumns	Specifies the pseudocolumns to expose as table columns. Use the format 'TableName=ColumnName;TableName=ColumnName'. The default is an empty string, which disables this property.
Timeout	Specifies the maximum time, in seconds, that the provider waits for a server response before throwing a timeout error. The default is 60 seconds. Set to 0 to disable the timeout.
UserDefinedViews	Specifies a filepath to a JSON configuration file defining custom views. The provider automatically detects and uses the views specified in this file.
UserId	Specify this UserId in order to access the OneNote documents for this user.

Authentication

This section provides a complete list of the Authentication properties you can configure in the connection string for this provider.

Property	Description
AuthScheme	Specifies the type of authentication to use when connecting to Microsoft OneNote. If this property is left blank, the default authentication is used.

AuthScheme

Specifies the type of authentication to use when connecting to Microsoft OneNote. If this property is left blank, the default authentication is used.

Remarks

AzureAD: Perform Azure Active Directory (user-based) OAuth authentication.
AzureMSI: Automatically obtain Azure AD Managed Service Identity credentials when running on an Azure VM.
AzureServicePrincipal: Authenticate as an Azure Service Principal (role-based, application-based) using a Client Secret.
AzureServicePrincipalCert: Authenticate as an Azure Service Principal (role-based, application-based) using a Certificate.

For information about creating a custom application to authenticate with Azure AD, see Creating a Custom Authentication App.

For information about creating a custom application to authenticate with Azure AD Service Principal, see Creating an Azure AD App with Service Principal.

Connection

This section provides a complete list of the Connection properties you can configure in the connection string for this provider.

Property

Description

IncludeSharePointSites

Whether to retrieve drives for all SharePoint sites when querying Drives view. If 'true' the provider will retrieve all Site IDs recursively and for each of them issue a separate call to get their drives. Therefore, be aware that setting this property to 'true' may decrease performance for the Drives view. Note that the SharePointAccessToken or OAuthJWTCert connection property must be specified to query the SharePointSites view and other views if IncludeSharePointSites is set to 'true' when using the CLIENT OAuthGrantType or the AzureServicePrincipal AuthScheme.

IncludeSharePointSites

Whether to retrieve drives for all SharePoint sites when querying Drives view. If 'true' the provider will retrieve all Site IDs recursively and for each of them issue a separate call to get their drives. Therefore, be aware that setting this property to 'true' may decrease performance for the Drives view. Note that the SharePointAccessToken or OAuthJWTCert connection property must be specified to query the SharePointSites view and other views if IncludeSharePointSites is set to 'true' when using the CLIENT OAuthGrantType or the AzureServicePrincipal AuthScheme.

Remarks

This property affects only Drives views.

Azure Authentication

This section provides a complete list of the Azure Authentication properties you can configure in the connection string for this provider.

Property	Description
AzureTenant	Identifies the Microsoft OneNote tenant being used to access data, either by name (for example, contoso.omnicrosoft.com) or ID. (Conditional).
AzureEnvironment	Specifies the Azure network environment to which you will connect. Must be the same network to which your Azure account was added.

AzureTenant

Identifies the Microsoft OneNote tenant being used to access data, either by name (for example, contoso.omnicrosoft.com) or ID. (Conditional).

Remarks

A tenant is a digital representation of your organization, primarily associated with a domain (for example, microsoft.com). The tenant is managed through a Tenant ID (also known as the directory ID), which is specified whenever you assign users permissions to access or manage Azure resources.

To locate the directory ID in the Azure Portal, navigate to Azure Active Directory > Properties.

Specifying AzureTenant is required when AuthScheme = either AzureServicePrincipal or AzureServicePrincipalCert, or if AuthScheme = AzureAD and the user belongs to more than one tenant.

AzureEnvironment

Specifies the Azure network environment to which you will connect. Must be the same network to which your Azure account was added.

Remarks

Required if your Azure account is part of a different network than the Global network, such as China, USGOVT, or USGOVTDOD.

OAuth

This section provides a complete list of the OAuth properties you can configure in the connection string for this provider.

Property	Description
OAuthClientId	Specifies the client Id that was assigned the custom OAuth application was created. (Also known as the consumer key.) This ID registers the custom application with the OAuth authorization server.
OAuthClientSecret	Specifies the client secret that was assigned when the custom OAuth application was created. (Also known as the consumer secret ). This secret registers the custom application with the OAuth authorization server.
OAuthGrantType	Specifies the grant type for the chosen OAuth flow. This value should be the same as the grant_type that was set during OAuth custom application creation.

OAuthClientId

Specifies the client Id that was assigned the custom OAuth application was created. (Also known as the consumer key.) This ID registers the custom application with the OAuth authorization server.

Remarks

OAuthClientId is one of a handful of connection parameters that need to be set before users can authenticate via OAuth. For details, see Establishing a Connection.

OAuthClientSecret

Specifies the client secret that was assigned when the custom OAuth application was created. (Also known as the consumer secret ). This secret registers the custom application with the OAuth authorization server.

Remarks

OAuthClientSecret is one of a handful of connection parameters that need to be set before users can authenticate via OAuth. For details, see Establishing a Connection.

OAuthGrantType

Specifies the grant type for the chosen OAuth flow. This value should be the same as the grant_type that was set during OAuth custom application creation.

Remarks

In most cases, the default grant type should not be modified. For information about the most common OAuth grant types and the trade-offs between them, see https://oauth.net/2/grant-types/.

JWT OAuth

This section provides a complete list of the JWT OAuth properties you can configure in the connection string for this provider.

Property	Description
OAuthJWTCert	The JWT Certificate store.
OAuthJWTCertType	The type of key store containing the JWT Certificate.
OAuthJWTCertPassword	The password for the OAuth JWT certificate used to access a certificate store that requires a password. If the certificate store does not require a password, leave this property blank.
OAuthJWTCertSubject	The subject of the OAuth JWT certificate used to locate a matching certificate in the store. Supports partial matches and the wildcard '*' to select the first certificate.

OAuthJWTCert

The JWT Certificate store.

Remarks

The name of the certificate store for the client certificate.

The OAuthJWTCertType field specifies the type of the certificate store specified by OAuthJWTCert. If the store is password protected, specify the password in OAuthJWTCertPassword.

OAuthJWTCert is used in conjunction with the OAuthJWTCertSubject field in order to specify client certificates. If OAuthJWTCert has a value, and OAuthJWTCertSubject is set, a search for a certificate is initiated. Please refer to the OAuthJWTCertSubject field for details.

Designations of certificate stores are platform-dependent.

The following are designations of the most common User and Machine certificate stores in Windows:


MY	A certificate store holding personal certificates with their associated private keys.
CA	Certifying authority certificates.
ROOT	Root certificates.
SPC	Software publisher certificates.

In Java, the certificate store normally is a file containing certificates and optional private keys.

When the certificate store type is PFXFile, this property must be set to the name of the file. When the type is PFXBlob, the property must be set to the binary contents of a PFX file (i.e. PKCS12 certificate store).

OAuthJWTCertType

The type of key store containing the JWT Certificate.

Remarks

This property can take one of the following values:


USER	For Windows, this specifies that the certificate store is a certificate store owned by the current user. Note: This store type is not available in Java.
MACHINE	For Windows, this specifies that the certificate store is a machine store. Note: this store type is not available in Java.
PFXFILE	The certificate store is the name of a PFX (PKCS12) file containing certificates.
PFXBLOB	The certificate store is a string (base-64-encoded) representing a certificate store in PFX (PKCS12) format.
JKSFILE	The certificate store is the name of a Java key store (JKS) file containing certificates. Note: this store type is only available in Java.
JKSBLOB	The certificate store is a string (base-64-encoded) representing a certificate store in Java key store (JKS) format. Note: this store type is only available in Java.
PEMKEY_FILE	The certificate store is the name of a PEM-encoded file that contains a private key and an optional certificate.
PEMKEY_BLOB	The certificate store is a string (base64-encoded) that contains a private key and an optional certificate.
PUBLIC_KEY_FILE	The certificate store is the name of a file that contains a PEM- or DER-encoded public key certificate.
PUBLIC_KEY_BLOB	The certificate store is a string (base-64-encoded) that contains a PEM- or DER-encoded public key certificate.
SSHPUBLIC_KEY_FILE	The certificate store is the name of a file that contains an SSH-style public key.
SSHPUBLIC_KEY_BLOB	The certificate store is a string (base-64-encoded) that contains an SSH-style public key.
P7BFILE	The certificate store is the name of a PKCS7 file containing certificates.
PPKFILE	The certificate store is the name of a file that contains a PPK (PuTTY Private Key).
XMLFILE	The certificate store is the name of a file that contains a certificate in XML format.
XMLBLOB	The certificate store is a string that contains a certificate in XML format.
BCFKSFILE	The certificate store is the name of a file that contains an Bouncy Castle keystore.
BCFKSBLOB	The certificate store is a string (base-64-encoded) that contains a Bouncy Castle keystore.

OAuthJWTCertPassword

The password for the OAuth JWT certificate used to access a certificate store that requires a password. If the certificate store does not require a password, leave this property blank.

Remarks

This property specifies the password needed to open the certificate store, but only if the store type requires one. To determine if a password is necessary, refer to the documentation or configuration for your specific certificate store.

OAuthJWTCertSubject

The subject of the OAuth JWT certificate used to locate a matching certificate in the store. Supports partial matches and the wildcard '*' to select the first certificate.

Remarks

The value of this property is used to locate a matching certificate in the store. The search process works as follows:

If an exact match for the subject is found, the corresponding certificate is selected.
If no exact match is found, the store is searched for certificates whose subjects contain the property value.
If no match is found, no certificate is selected.

You can set the value to '*' to automatically select the first certificate in the store. The certificate subject is a comma-separated list of distinguished name fields and values. For example: CN=www.server.com, OU=test, C=US, [email protected]. Common fields include:


Field	Meaning
CN	Common Name. This is commonly a host name like www.server.com.
O	Organization
OU	Organizational Unit
L	Locality
S	State
C	Country
E	Email Address

If a field value contains a comma, enclose it in quotes. For example: "O=ACME, Inc.".

SSL

This section provides a complete list of the SSL properties you can configure in the connection string for this provider.

Property	Description
SSLServerCert	Specifies the certificate to be accepted from the server when connecting using TLS/SSL.

SSLServerCert

Specifies the certificate to be accepted from the server when connecting using TLS/SSL.

Remarks

If using a TLS/SSL connection, this property can be used to specify the TLS/SSL certificate to be accepted from the server. Any other certificate that is not trusted by the machine is rejected.

This property can take the following forms:


Description	Example
A full PEM Certificate (example shortened for brevity)	-----BEGIN CERTIFICATE----- MIIChTCCAe4CAQAwDQYJKoZIhv......Qw== -----END CERTIFICATE-----
A path to a local file containing the certificate	C:\cert.cer
The public key (example shortened for brevity)	-----BEGIN RSA PUBLIC KEY----- MIGfMA0GCSq......AQAB -----END RSA PUBLIC KEY-----
The MD5 Thumbprint (hex values can also be either space or colon separated)	ecadbdda5a1529c58a1e9e09828d70e4
The SHA1 Thumbprint (hex values can also be either space or colon separated)	34a929226ae0819f2ec14b4a3d904f801cbb150d

If not specified, any certificate trusted by the machine is accepted.

Use '*' to signify to accept all certificates. Note that this is not recommended due to security concerns.

Firewall

This section provides a complete list of the Firewall properties you can configure in the connection string for this provider.

Property	Description
FirewallType	Specifies the protocol the provider uses to tunnel traffic through a proxy-based firewall.
FirewallServer	Identifies the IP address, DNS name, or host name of a proxy used to traverse a firewall and relay user queries to network resources.
FirewallPort	Specifies the TCP port to be used for a proxy-based firewall.
FirewallUser	Identifies the user ID of the account authenticating to a proxy-based firewall.
FirewallPassword	Specifies the password of the user account authenticating to a proxy-based firewall.

FirewallType

Specifies the protocol the provider uses to tunnel traffic through a proxy-based firewall.

Remarks

A proxy-based firewall (or proxy firewall) is a network security device that acts as an intermediary between user requests and the resources they access. The proxy accepts the request of an authenticated user, tunnels through the firewall, and transmits the request to the appropriate server.

Because the proxy evaluates and transfers data backets on behalf of the requesting users, the users never connect directly with the servers, only with the proxy.

Note: By default, the Sync App connects to the system proxy. To disable this behavior and connect to one of the following proxy types, set ProxyAutoDetect to false.

The following table provides port number information for each of the supported protocols.


Protocol	Default Port	Description
TUNNEL	80	The port where the Sync App opens a connection to Microsoft OneNote. Traffic flows back and forth via the proxy at this location.
SOCKS4	1080	The port where the Sync App opens a connection to Microsoft OneNote. SOCKS 4 then passes theFirewallUser value to the proxy, which determines whether the connection request should be granted.
SOCKS5	1080	The port where the Sync App sends data to Microsoft OneNote. If the SOCKS 5 proxy requires authentication, set FirewallUser and FirewallPassword to credentials the proxy recognizes.

To connect to HTTP proxies, use ProxyServer and ProxyPort. To authenticate to HTTP proxies, use ProxyAuthScheme, ProxyUser, and ProxyPassword.

FirewallServer

Identifies the IP address, DNS name, or host name of a proxy used to traverse a firewall and relay user queries to network resources.

Remarks

A proxy-based firewall (or proxy firewall) is a network security device that acts as an intermediary between user requests and the resources they access. The proxy accepts the request of an authenticated user, tunnels through the firewall, and transmits the request to the appropriate server.

Because the proxy evaluates and transfers data backets on behalf of the requesting users, the users never connect directly with the servers, only with the proxy.

FirewallPort

Specifies the TCP port to be used for a proxy-based firewall.

Remarks

A proxy-based firewall (or proxy firewall) is a network security device that acts as an intermediary between user requests and the resources they access. The proxy accepts the request of an authenticated user, tunnels through the firewall, and transmits the request to the appropriate server.

Because the proxy evaluates and transfers data backets on behalf of the requesting users, the users never connect directly with the servers, only with the proxy.

FirewallUser

Identifies the user ID of the account authenticating to a proxy-based firewall.

Remarks

A proxy-based firewall (or proxy firewall) is a network security device that acts as an intermediary between user requests and the resources they access. The proxy accepts the request of an authenticated user, tunnels through the firewall, and transmits the request to the appropriate server.

Because the proxy evaluates and transfers data backets on behalf of the requesting users, the users never connect directly with the servers, only with the proxy.

FirewallPassword

Specifies the password of the user account authenticating to a proxy-based firewall.

Remarks

A proxy-based firewall (or proxy firewall) is a network security device that acts as an intermediary between user requests and the resources they access. The proxy accepts the request of an authenticated user, tunnels through the firewall, and transmits the request to the appropriate server.

Because the proxy evaluates and transfers data backets on behalf of the requesting users, the users never connect directly with the servers, only with the proxy.

Proxy

This section provides a complete list of the Proxy properties you can configure in the connection string for this provider.

Property	Description
ProxyAutoDetect	Specifies whether the provider checks your system proxy settings for existing proxy server configurations, rather than using a manually specified proxy server.
ProxyServer	The hostname or IP address of the proxy server that you want to route HTTP traffic through.
ProxyPort	The TCP port on your specified proxy server (set in the ProxyServer connection property) that has been reserved for routing HTTP traffic to and from the client.
ProxyAuthScheme	Specifies the authentication method the provider uses when authenticating to the proxy server specified in the ProxyServer connection property.
ProxyUser	The username of a user account registered with the proxy server specified in the ProxyServer connection property.
ProxyPassword	The password associated with the user specified in the ProxyUser connection property.
ProxySSLType	The SSL type to use when connecting to the proxy server specified in the ProxyServer connection property.
ProxyExceptions	A semicolon separated list of destination hostnames or IPs that are exempt from connecting through the proxy server set in the ProxyServer connection property.

ProxyAutoDetect

Specifies whether the provider checks your system proxy settings for existing proxy server configurations, rather than using a manually specified proxy server.

Remarks

When this connection property is set to True, the Sync App checks your system proxy settings for existing proxy server configurations (no need to manually supply proxy server details).

This connection property takes precedence over other proxy settings. Set to False if you want to manually configure the Sync App to connect to a specific proxy server.

To connect to an HTTP proxy, see ProxyServer. For other proxies, such as SOCKS or tunneling, see FirewallType.

ProxyServer

The hostname or IP address of the proxy server that you want to route HTTP traffic through.

Remarks

The Sync App only routes HTTP traffic through the proxy server specified in this connection property when ProxyAutoDetect is set to False. If ProxyAutoDetect is set to True, which is the default, the Sync App instead routes HTTP traffic through the proxy server specified in your system proxy settings.

ProxyPort

The TCP port on your specified proxy server (set in the ProxyServer connection property) that has been reserved for routing HTTP traffic to and from the client.

Remarks

The Sync App only routes HTTP traffic through the proxy server port specified in this connection property when ProxyAutoDetect is set to False. If ProxyAutoDetect is set to True, which is the default, the Sync App instead routes HTTP traffic through the proxy server port specified in your system proxy settings.

For other proxy types, see FirewallType.

ProxyAuthScheme

Specifies the authentication method the provider uses when authenticating to the proxy server specified in the ProxyServer connection property.

Remarks

The authentication type can be one of the following:

BASIC: The Sync App performs HTTP BASIC authentication.
DIGEST: The Sync App performs HTTP DIGEST authentication.
NTLM: The Sync App retrieves an NTLM token.
NEGOTIATE: The Sync App retrieves an NTLM or Kerberos token based on the applicable protocol for authentication.
NONE: Set this when the ProxyServer does not require authentication.

For all values other than "NONE", you must also set the ProxyUser and ProxyPassword connection properties.

If you need to use another authentication type, such as SOCKS 5 authentication, see FirewallType.

ProxyUser

The username of a user account registered with the proxy server specified in the ProxyServer connection property.

Remarks

The ProxyUser and ProxyPassword connection properties are used to connect and authenticate against the HTTP proxy specified in ProxyServer.

After selecting one of the available authentication types in ProxyAuthScheme, set this property as follows:


ProxyAuthScheme Value	Value to set for ProxyUser
BASIC	The user name of a user registered with the proxy server.
DIGEST	The user name of a user registered with the proxy server.
NEGOTIATE	The username of a Windows user who is a valid user in the domain or trusted domain that the proxy server is part of, in the format `user@domain` or `domain\user`.
NTLM	The username of a Windows user who is a valid user in the domain or trusted domain that the proxy server is part of, in the format `user@domain` or `domain\user`.
NONE	Do not set the ProxyPassword connection property.

The Sync App only uses this username if ProxyAutoDetect is set to False. If ProxyAutoDetect is set to True, which is the default, the Sync App instead uses the username specified in your system proxy settings.

ProxyPassword

The password associated with the user specified in the ProxyUser connection property.

Remarks

The ProxyUser and ProxyPassword connection properties are used to connect and authenticate against the HTTP proxy specified in ProxyServer.

After selecting one of the available authentication types in ProxyAuthScheme, set this property as follows:


ProxyAuthScheme Value	Value to set for ProxyPassword
BASIC	The password associated with the proxy server user specified in ProxyUser.
DIGEST	The password associated with the proxy server user specified in ProxyUser.
NEGOTIATE	The password associated with the Windows user account specified in ProxyUser.
NTLM	The password associated with the Windows user account specified in ProxyUser.
NONE	Do not set the ProxyPassword connection property.

For SOCKS 5 authentication or tunneling, see FirewallType.

The Sync App only uses this password if ProxyAutoDetect is set to False. If ProxyAutoDetect is set to True, which is the default, the Sync App instead uses the password specified in your system proxy settings.

ProxySSLType

The SSL type to use when connecting to the proxy server specified in the ProxyServer connection property.

Remarks

This property determines when to use SSL for the connection to the HTTP proxy specified by ProxyServer. You can set this connection property to the following values :


AUTO	Default setting. If ProxyServer is set to an HTTPS URL, the Sync App uses the TUNNEL option. If ProxyServer is set to an HTTP URL, the component uses the NEVER option.
ALWAYS	The connection is always SSL enabled.
NEVER	The connection is not SSL enabled.
TUNNEL	The connection is made through a tunneling proxy. The proxy server opens a connection to the remote host and traffic flows back and forth through the proxy.

ProxyExceptions

A semicolon separated list of destination hostnames or IPs that are exempt from connecting through the proxy server set in the ProxyServer connection property.

Remarks

The ProxyServer is used for all addresses, except for addresses defined in this property. Use semicolons to separate entries.

Note that the Sync App uses the system proxy settings by default, without further configuration needed. If you want to explicitly configure proxy exceptions for this connection, set ProxyAutoDetect to False.

Logging

This section provides a complete list of the Logging properties you can configure in the connection string for this provider.

Property	Description
LogModules	Specifies the core modules to include in the log file. Use a semicolon-separated list of module names. By default, all modules are logged.

LogModules

Specifies the core modules to include in the log file. Use a semicolon-separated list of module names. By default, all modules are logged.

Remarks

This property lets you customize the log file content by specifying the logging modules to include. Logging modules categorize logged information into distinct areas, such as query execution, metadata, or SSL communication. Each module is represented by a four-character code, with some requiring a trailing space for three-letter names.

For example, EXEC logs query execution, and INFO logs general provider messages. To include multiple modules, separate their names with semicolons as follows: INFO;EXEC;SSL.

The Verbosity connection property takes precedence over the module-based filtering specified by this property. Only log entries that meet the verbosity level and belong to the specified modules are logged. Leave this property blank to include all available modules in the log file.

For a complete list of available modules and detailed guidance on configuring logging, refer to the Advanced Logging section in Logging.

Schema

This section provides a complete list of the Schema properties you can configure in the connection string for this provider.

Property	Description
Location	Specifies the location of a directory containing schema files that define tables, views, and stored procedures. Depending on your service's requirements, this may be expressed as either an absolute path or a relative path.
BrowsableSchemas	Optional setting that restricts the schemas reported to a subset of all available schemas. For example, BrowsableSchemas=SchemaA,SchemaB,SchemaC .
Tables	Optional setting that restricts the tables reported to a subset of all available tables. For example, Tables=TableA,TableB,TableC .
Views	Optional setting that restricts the views reported to a subset of the available tables. For example, Views=ViewA,ViewB,ViewC .

Location

Specifies the location of a directory containing schema files that define tables, views, and stored procedures. Depending on your service's requirements, this may be expressed as either an absolute path or a relative path.

Remarks

The Location property is only needed if you want to either customize definitions (for example, change a column name, ignore a column, etc.) or extend the data model with new tables, views, or stored procedures.

If left unspecified, the default location is %APPDATA%\\CData\\OneNote Data Provider\\Schema, where %APPDATA% is set to the user's configuration directory:


Platform	%APPDATA%
Windows	The value of the APPDATA environment variable
Linux	~/.config

BrowsableSchemas

Optional setting that restricts the schemas reported to a subset of all available schemas. For example, BrowsableSchemas=SchemaA,SchemaB,SchemaC .

Remarks

Listing all available database schemas can take extra time, thus degrading performance. Providing a list of schemas in the connection string saves time and improves performance.

Tables

Optional setting that restricts the tables reported to a subset of all available tables. For example, Tables=TableA,TableB,TableC .

Remarks

Listing all available tables from some databases can take extra time, thus degrading performance. Providing a list of tables in the connection string saves time and improves performance.

If there are lots of tables available and you already know which ones you want to work with, you can use this property to restrict your viewing to only those tables. To do this, specify the tables you want in a comma-separated list. Each table should be a valid SQL identifier with any special characters escaped using square brackets, double-quotes or backticks. For example, Tables=TableA,[TableB/WithSlash],WithCatalog.WithSchema.`TableC With Space`.

Note: If you are connecting to a data source with multiple schemas or catalogs, you must specify each table you want to view by its fully qualified name. This avoids ambiguity between tables that may exist in multiple catalogs or schemas.

Views

Optional setting that restricts the views reported to a subset of the available tables. For example, Views=ViewA,ViewB,ViewC .

Remarks

Listing all available views from some databases can take extra time, thus degrading performance. Providing a list of views in the connection string saves time and improves performance.

If there are lots of views available and you already know which ones you want to work with, you can use this property to restrict your viewing to only those views. To do this, specify the views you want in a comma-separated list. Each view should be a valid SQL identifier with any special characters escaped using square brackets, double-quotes or backticks. For example, Views=ViewA,[ViewB/WithSlash],WithCatalog.WithSchema.`ViewC With Space`.

Note: If you are connecting to a data source with multiple schemas or catalogs, you must specify each view you want to examine by its fully qualified name. This avoids ambiguity between views that may exist in multiple catalogs or schemas.

Miscellaneous

This section provides a complete list of the Miscellaneous properties you can configure in the connection string for this provider.

Property	Description
GroupId	Specify this GroupId in order to access the OneNote documents for this group.
MaxRows	Specifies the maximum rows returned for queries without aggregation or GROUP BY.
Other	Specifies additional hidden properties for specific use cases. These are not required for typical provider functionality. Use a semicolon-separated list to define multiple properties.
PseudoColumns	Specifies the pseudocolumns to expose as table columns. Use the format 'TableName=ColumnName;TableName=ColumnName'. The default is an empty string, which disables this property.
Timeout	Specifies the maximum time, in seconds, that the provider waits for a server response before throwing a timeout error. The default is 60 seconds. Set to 0 to disable the timeout.
UserDefinedViews	Specifies a filepath to a JSON configuration file defining custom views. The provider automatically detects and uses the views specified in this file.
UserId	Specify this UserId in order to access the OneNote documents for this user.

GroupId

Specify this GroupId in order to access the OneNote documents for this group.

Remarks

Specify this GroupId in order to access the OneNote documents for this group.

MaxRows

Specifies the maximum rows returned for queries without aggregation or GROUP BY.

Remarks

This property sets an upper limit on the number of rows the Sync App returns for queries that do not include aggregation or GROUP BY clauses. This limit ensures that queries do not return excessively large result sets by default.

When a query includes a LIMIT clause, the value specified in the query takes precedence over the MaxRows setting. If MaxRows is set to "-1", no row limit is enforced unless a LIMIT clause is explicitly included in the query.

This property is useful for optimizing performance and preventing excessive resource consumption when executing queries that could otherwise return very large datasets.

Other

Specifies additional hidden properties for specific use cases. These are not required for typical provider functionality. Use a semicolon-separated list to define multiple properties.

Remarks

This property allows advanced users to configure hidden properties for specialized scenarios. These settings are not required for normal use cases but can address unique requirements or provide additional functionality. Multiple properties can be defined in a semicolon-separated list.

Note: It is strongly recommended to set these properties only when advised by the support team to address specific scenarios or issues.

Specify multiple properties in a semicolon-separated list.

Integration and Formatting


DefaultColumnSize	Sets the default length of string fields when the data source does not provide column length in the metadata. The default value is 2000.
ConvertDateTimeToGMT	Determines whether to convert date-time values to GMT, instead of the local time of the machine.
RecordToFile=filename	Records the underlying socket data transfer to the specified file.

PseudoColumns

Specifies the pseudocolumns to expose as table columns. Use the format 'TableName=ColumnName;TableName=ColumnName'. The default is an empty string, which disables this property.

Remarks

This property allows you to define which pseudocolumns the Sync App exposes as table columns.

To specify individual pseudocolumns, use the following format: "Table1=Column1;Table1=Column2;Table2=Column3"

To include all pseudocolumns for all tables use: "*=*"

Timeout

Specifies the maximum time, in seconds, that the provider waits for a server response before throwing a timeout error. The default is 60 seconds. Set to 0 to disable the timeout.

Remarks

This property controls the maximum time, in seconds, that the Sync App waits for an operation to complete before canceling it. If the timeout period expires before the operation finishes, the Sync App cancels the operation and throws an exception.

The timeout applies to each individual communication with the server rather than the entire query or operation. For example, a query could continue running beyond 60 seconds if each paging call completes within the timeout limit.

Setting this property to 0 disables the timeout, allowing operations to run indefinitely until they succeed or fail due to other conditions such as server-side timeouts, network interruptions, or resource limits on the server. Use this property cautiously to avoid long-running operations that could degrade performance or result in unresponsive behavior.

UserDefinedViews

Specifies a filepath to a JSON configuration file defining custom views. The provider automatically detects and uses the views specified in this file.

Remarks

This property allows you to define and manage custom views through a JSON-formatted configuration file called UserDefinedViews.json. These views are automatically recognized by the Sync App and enable you to execute custom SQL queries as if they were standard database views. The JSON file defines each view as a root element with a child element called "query", which contains the SQL query for the view. For example:

{
	"MyView": {
		"query": "SELECT * FROM Notebooks WHERE MyColumn = 'value'"
	},
	"MyView2": {
		"query": "SELECT * FROM MyTable WHERE Id IN (1,2,3)"
	}
}

You can define multiple views in a single file and specify the filepath using this property. For example: UserDefinedViews=C:\Path\To\UserDefinedViews.json. When you use this property, only the specified views are seen by the Sync App.

Refer to User Defined Views for more information.

UserId

Specify this UserId in order to access the OneNote documents for this user.

Remarks

Specify this UserId in order to access the OneNote documents for this user.

Microsoft OneNote Connector for CData Sync

Microsoft OneNote Connector for CData Sync

Overview

Microsoft OneNote Version Support

Establishing a Connection

Adding a Connection to Microsoft OneNote

Connecting to Microsoft OneNote

Azure AD

Azure Service Principal

Managed Service Identity (MSI)

User-Managed Identities

Creating a Custom Authentication App

Creating an Azure AD Application

Authenticating With Azure AD

Creating an Azure AD Application

Authenticating With Azure AD

Administrative Tasks

The UserId Column

Advanced Features

User Defined Views

SSL Configuration

Firewall and Proxy

Query Processing

Logging

SSL Configuration

Customizing the SSL Configuration

Firewall and Proxy

Connecting Through a Firewall or Proxy

HTTP Proxies

Other Proxies

Data Model

Overview

Key Features

Views

Tables

Stored Procedures

Tables

Microsoft OneNote Connector for CData Sync Tables

Notebooks

Table Specific Information

Select

Insert

Columns

SectionGroups

Table Specific Information

Select

Insert

Columns

Sections

Table Specific Information

Select

Insert

Columns

Views

Microsoft OneNote Connector for CData Sync Views

Groups

Table Specific Information

Select

Columns

Pages

Table Specific Information

Select

Columns

PagesContent

Table Specific Information

Select

Columns

Sites

Columns

Users

Table Specific Information

Select

Columns

Data Type Mapping

Data Type Mappings

Connection String Options

Authentication

AuthScheme

Remarks

Connection