Adding a Connection to Apache Phoenix

To add a connection to Apache Phoenix:

1. In the application console, navigate to the Connections page.
2. At the Add Connections panel, select the icon for the connection you want to add.
3. If the Apache Phoenix icon is not available, click the Add More icon to download and install the Apache Phoenix connector from the CData site.

For required properties, see the Settings tab.

For connection properties that are not typically required, see the Advanced tab.

Before You Connect

Different distributions contain different interfaces and means of starting and stopping the Phoenix Query server, along with different default port settings. In most distributions, the server can be started in the background by running the following command: queryserver.py start.

This will require a running instance of HBase and possibly ZooKeeper as well.

Please consult your distribution's documentation for further information regarding the Phoenix Query Server.

Connecting to Apache Phoenix

The CData Sync App connects to Apache Phoenix via the Phoenix Query Server. Set the URL connection property to connect to Apache Phoenix.

The URL property will typically be the host name or IP address of the server hosting Apache Phoenix followed by the port, for example: http://localhost:8765.

Authenticating to Apache Phoenix

By default, no authentication will be used (plain). If authentication is configured for your server, you can configure one of the following authentication methods.

Basic

If your instance of Apache Phoenix has set up the basic authentication layer, set the following to authenticate:

• AuthScheme: Set this to Basic.
• User: Set this to the user of your Apache Phoenix instance.
• Password: Set this to the password of your Apache Phoenix instance.

Azure HDInsight

To authenticate to Azure HDInsight, set the following:

• AuthScheme: Set this to AzureHDInsight.
• User: Set this to the cluster username that you specified when creating the cluster on Azure HDInsight.
• Password: Set this to the cluster password that you specified when creating the cluster on Azure HDInsight.
• ClusterName: Set this to the name of the cluster containing your Azure HDInsight instance.

All calls are sent to a gateway which picks one of the nodes to handle the request. Accessing the specific nodes is possible if you are running within the internal virtual network of the cluster.

Kerberos

Set the AuthScheme to Negotiate. See Using Kerberos for details on how to authenticate with Kerberos.

Kerberos

To authenticate to Apache Phoenix with Kerberos, set AuthScheme to NEGOTIATE.

Authenticating to Apache Phoenix via Kerberos requires you to define authentication properties and to choose how Kerberos should retrieve authentication tickets.

Retrieve Kerberos Tickets

Kerberos tickets are used to authenticate the requester's identity. The use of tickets instead of formal logins/passwords eliminates the need to store passwords locally or send them over a network. Users are reauthenticated (tickets are refreshed) whenever they log in at their local computer or enter kinit USER at the command prompt.

The Sync App provides three ways to retrieve the required Kerberos ticket, depending on whether or not the KRB5CCNAME and/or KerberosKeytabFile variables exist in your environment.

MIT Kerberos Credential Cache File

This option enables you to use the MIT Kerberos Ticket Manager or kinit command to get tickets. With this option there is no need to set the User or Password connection properties.

This option requires that KRB5CCNAME has been created in your system.

To enable ticket retrieval via MIT Cerberos Credential Cache Files:

1. Ensure that the KRB5CCNAME variable is present in your environment.
2. Set KRB5CCNAME to a path that points to your credential cache file. (For example, C:\krb_cache\krb5cc_0 or /tmp/krb5cc_0.) The credential cache file is created when you use the MIT Kerberos Ticket Manager to generate your ticket.
3. To obtain a ticket:
   1. Open the MIT Kerberos Ticket Manager application.
   2. Click Get Ticket.
   3. Enter your principal name and password.
   4. Click OK.

   If the ticket is successfully obtained, the ticket information appears in Kerberos Ticket Manager and is stored in the credential cache file.

The Sync App uses the cache file to obtain the Kerberos ticket to connect to Apache Phoenix.

Note: If you would prefer not to edit KRB5CCNAME, you can use the KerberosTicketCache property to set the file path manually. After this is set, the Sync App uses the specified cache file to obtain the Kerberos ticket to connect to Apache Phoenix.

Keytab File

If your environment lacks the KRB5CCNAME environment variable, you can retrieve a Kerberos ticket using a Keytab File.

To use this method, set the User property to the desired username, and set the KerberosKeytabFile property to a file path pointing to the keytab file associated with the user.

User and Password

If your environment lacks the KRB5CCNAME environment variable and the KerberosKeytabFile property has not been set, you can retrieve a ticket using a user and password combination.

To use this method, set the User and Password properties to the user/password combination that you use to authenticate with Apache Phoenix.

Enabling Cross-Realm Authentication

More complex Kerberos environments can require cross-realm authentication where multiple realms and KDC servers are used. For example, they might use one realm/KDC for user authentication, and another realm/KDC for obtaining the service ticket.

To enable this kind of cross-realm authentication, set the KerberosRealm and KerberosKDC properties to the values required for user authentication. Also, set the KerberosServiceRealm and KerberosServiceKDC properties to the values required to obtain the service ticket.

Enabling Multiple Schemas

By default, the CData Sync App will not use multiple schemas. The driver can be configured to work with other schemas if EnableSchemas is set to true.

The necessary changes must be made on the server-side of HBase and ApachePhoenix. Please consult the docs for more information.

Fine Tune Driver Performance

The connection property Pagesize can be used to control the size of a page (frame) returned from the API.

Setting a lower number will result in more requests made for data retrieval, while setting a bigger number will result in fewer requests. Setting a really big number can also result in OutOfMemory errors.

Batch Operations

The driver does extra operations in the background to convert INSERT and update operations to upserts. For performance reasons, it is advised to use upserts in batch operations.

Commits

By default, the CData Sync App works in auto commit mode.

That is, any create/update/upsert/delete operation executed, will be automatically auto committed on the server.

The same is true for batch operations as well.

This section details a selection of advanced features of the Apache Phoenix Sync App.

SSL Configuration

Use SSL Configuration to adjust how Sync App handles TLS/SSL certificate negotiations. You can choose from various certificate formats; see the SSLServerCert property under "Connection String Options" for more information.

Firewall and Proxy

Configure the Sync App for compliance with Firewall and Proxy, including Windows proxies and HTTP proxies. You can also set up tunnel connections.

Logging

See Logging for an overview of configuration settings that can be used to refine CData logging. For basic logging, you only need to set two connection properties, but there are numerous features that support more refined logging, where you can select subsets of information to be logged using the LogModules connection property.

Customizing the SSL Configuration

By default, the Sync App attempts to negotiate SSL/TLS by checking the server's certificate against the system's trusted certificate store.

To specify another certificate, see the SSLServerCert property for the available formats to do so.

Client SSL Certificates

The Apache Phoenix Sync App also supports setting client certificates. Set the following to connect using a client certificate.

• SSLClientCert: The name of the certificate store for the client certificate.
• SSLClientCertType: The type of key store containing the TLS/SSL client certificate.
• SSLClientCertPassword: The password for the TLS/SSL client certificate.
• SSLClientCertSubject: The subject of the TLS/SSL client certificate.

Connecting Through a Firewall or Proxy

HTTP Proxies

To connect through the Windows system proxy, you do not need to set any additional connection properties. To connect to other proxies, set ProxyAutoDetect to false.

In addition, to authenticate to an HTTP proxy, set ProxyAuthScheme, ProxyUser, and ProxyPassword, in addition to ProxyServer and ProxyPort.

Other Proxies

Set the following properties:

• To use a proxy-based firewall, set FirewallType, FirewallServer, and FirewallPort.
• To tunnel the connection, set FirewallType to TUNNEL.
• To authenticate, specify FirewallUser and FirewallPassword.
• To authenticate to a SOCKS proxy, additionally set FirewallType to SOCKS5.

The connection string properties are the various options that can be used to establish a connection. This section provides a complete list of the options you can configure in the connection string for this provider. Click the links for further details.

For more information on establishing a connection, see Establishing a Connection.

Authentication

---

Property	Description
AuthScheme	The scheme used for authentication. Accepted entries are None, and Negotiate (Kerberos). None is the default.
User	The Apache Phoenix user account used to authenticate.
Password	The password used to authenticate the user.
ClusterName	The name of the cluster containing your Azure HDInsight instance.
ImpersonationUser	The user to impersonate while sending requests to the Phoenix Query Server.

Connection

---

Property	Description
URL	The URL to your Apache Phoenix instance. This property overrides the Server/Port/UseSSL connection properties.
EnableSchemas	Set to true if the Apache Phoenix instance you are authenticating against supports multiple schemas.
Schema	The schema which will be used by default.
ServerConfigurations	A list of server configuration variables to override the server defaults.
Version	The version of the Apache Phoenix instance.

Kerberos

---

Property	Description
KerberosKDC	The Kerberos Key Distribution Center (KDC) service used to authenticate the user.
KerberosRealm	The Kerberos Realm used to authenticate the user.
KerberosSPN	The service principal name (SPN) for the Kerberos Domain Controller.
KerberosKeytabFile	The Keytab file containing your pairs of Kerberos principals and encrypted keys.
KerberosServiceRealm	The Kerberos realm of the service.
KerberosServiceKDC	The Kerberos KDC of the service.
KerberosTicketCache	The full file path to an MIT Kerberos credential cache file.

SSL

---

Property	Description
SSLClientCert	The TLS/SSL client certificate store for SSL Client Authentication (2-way SSL).
SSLClientCertType	The type of key store containing the TLS/SSL client certificate.
SSLClientCertPassword	The password for the TLS/SSL client certificate.
SSLClientCertSubject	The subject of the TLS/SSL client certificate.
SSLServerCert	The certificate to be accepted from the server when connecting using TLS/SSL.

Firewall

---

Property	Description
FirewallType	The protocol used by a proxy-based firewall.
FirewallServer	The name or IP address of a proxy-based firewall.
FirewallPort	The TCP port for a proxy-based firewall.
FirewallUser	The user name to use to authenticate with a proxy-based firewall.
FirewallPassword	A password used to authenticate to a proxy-based firewall.

Proxy

---

Property	Description
ProxyAutoDetect	This indicates whether to use the system proxy settings or not.
ProxyServer	The hostname or IP address of a proxy to route HTTP traffic through.
ProxyPort	The TCP port the ProxyServer proxy is running on.
ProxyAuthScheme	The authentication type to use to authenticate to the ProxyServer proxy.
ProxyUser	A user name to be used to authenticate to the ProxyServer proxy.
ProxyPassword	A password to be used to authenticate to the ProxyServer proxy.
ProxySSLType	The SSL type to use when connecting to the ProxyServer proxy.
ProxyExceptions	A semicolon separated list of destination hostnames or IPs that are exempt from connecting through the ProxyServer .

Logging

---

Property	Description
LogModules	Core modules to be included in the log file.

Schema

---

Property	Description
Location	A path to the directory that contains the schema files defining tables, views, and stored procedures.
BrowsableSchemas	This property restricts the schemas reported to a subset of the available schemas. For example, BrowsableSchemas=SchemaA,SchemaB,SchemaC.
Tables	This property restricts the tables reported to a subset of the available tables. For example, Tables=TableA,TableB,TableC.
Views	Restricts the views reported to a subset of the available tables. For example, Views=ViewA,ViewB,ViewC.

Miscellaneous

---

Property	Description
AllowPreparedStatement	Prepare a query statement before its execution.
MaxRows	Specifies the maximum number of rows the provider requests and returns for all tables and views.
Other	These hidden properties are used only in specific use cases.
Pagesize	The number of rows which will be returned for each frame request.
QueryPassthrough	This option passes the query to the Apache Phoenix server as is.
Timeout	The value in seconds until the timeout error is thrown, canceling the operation.

This section provides a complete list of the Authentication properties you can configure in the connection string for this provider.

---

Property	Description
AuthScheme	The scheme used for authentication. Accepted entries are None, and Negotiate (Kerberos). None is the default.
User	The Apache Phoenix user account used to authenticate.
Password	The password used to authenticate the user.
ClusterName	The name of the cluster containing your Azure HDInsight instance.
ImpersonationUser	The user to impersonate while sending requests to the Phoenix Query Server.

The scheme used for authentication. Accepted entries are None, and Negotiate (Kerberos). None is the default.

Remarks

This field is used to authenticate against the server. Use the following options to select your authentication scheme:

• None: No authentication is performed.
• Basic: Basic authentication is performed. Properties User and Password need to be set to perform Basic authentication.
• Negotiate: If AuthScheme is set to Negotiate, the Sync App will negotiate an authentication mechanism with the server. Set AuthScheme to Negotiate if you want to use Kerberos authentication.
• AzureHDInsight: If AuthScheme is set to AzureHDInsight, the Sync App will connect to Azure HDInsight. Properties User, Password, and ClusterName need to be set for this to work.

The Apache Phoenix user account used to authenticate.

Remarks

Together with Password, this field is used to authenticate against the Apache Phoenix server.

The password used to authenticate the user.

Remarks

The User and Password are together used to authenticate with the server.

The name of the cluster containing your Azure HDInsight instance.

Remarks

The name of the cluster containing your Azure HDInsight instance.

The user to impersonate while sending requests to the Phoenix Query Server.

Remarks

The user to impersonate while sending requests to the Phoenix Query Server.

This section provides a complete list of the Connection properties you can configure in the connection string for this provider.

---

Property	Description
URL	The URL to your Apache Phoenix instance. This property overrides the Server/Port/UseSSL connection properties.
EnableSchemas	Set to true if the Apache Phoenix instance you are authenticating against supports multiple schemas.
Schema	The schema which will be used by default.
ServerConfigurations	A list of server configuration variables to override the server defaults.
Version	The version of the Apache Phoenix instance.

The URL to your Apache Phoenix instance. This property overrides the Server/Port/UseSSL connection properties.

Remarks

The URL to your Apache Phoenix instance; for example, http://localhost:8765.

Set to true if the Apache Phoenix instance you are authenticating against supports multiple schemas.

Remarks

Set to true if the Apache Phoenix instance you are authenticating against supports multiple schemas.

The schema which will be used by default.

Remarks

The property 'phoenix.schema.isNamespaceMappingEnabled' must be enabled on the server for this to work. Once the property is enabled, all queries will be run against this schema.

A list of server configuration variables to override the server defaults.

Remarks

This property takes a comma-separated list of Apache Phoenix configuration variables. Each value in the comma-separated list will be sent as specified to override the server default values.

See this link for a list of available configurations.

Example: phoenix.stats.updateFrequency=30000,phoenix.query.maxGlobalMemoryPercentage=30

The version of the Apache Phoenix instance.

Remarks

The version of the Apache Phoenix instance.

This section provides a complete list of the Kerberos properties you can configure in the connection string for this provider.

---

Property	Description
KerberosKDC	The Kerberos Key Distribution Center (KDC) service used to authenticate the user.
KerberosRealm	The Kerberos Realm used to authenticate the user.
KerberosSPN	The service principal name (SPN) for the Kerberos Domain Controller.
KerberosKeytabFile	The Keytab file containing your pairs of Kerberos principals and encrypted keys.
KerberosServiceRealm	The Kerberos realm of the service.
KerberosServiceKDC	The Kerberos KDC of the service.
KerberosTicketCache	The full file path to an MIT Kerberos credential cache file.

The Kerberos Key Distribution Center (KDC) service used to authenticate the user.

Remarks

The Kerberos properties are used when using SPNEGO or Windows Authentication. The Sync App will request session tickets and temporary session keys from the Kerberos KDC service. The Kerberos KDC service is conventionally colocated with the domain controller.

If Kerberos KDC is not specified, the Sync App will attempt to detect these properties automatically from the following locations:

• KRB5 Config File (krb5.ini/krb5.conf): If the KRB5_CONFIG environment variable is set and the file exists, the Sync App will obtain the KDC from the specified file. Otherwise, it will attempt to read from the default MIT location based on the OS: C:\ProgramData\MIT\Kerberos5\krb5.ini (Windows) or /etc/krb5.conf (Linux).
• Domain Name and Host: If the Kerberos Realm and Kerberos KDC could not be inferred from another location, the Sync App will infer them from the configured domain name and host.

The Kerberos Realm used to authenticate the user.

Remarks

The Kerberos properties are used when using SPNEGO or Windows Authentication. The Kerberos Realm is used to authenticate the user with the Kerberos Key Distribution Service (KDC). The Kerberos Realm can be configured by an administrator to be any string, but conventionally it is based on the domain name.

If Kerberos Realm is not specified, the Sync App will attempt to detect these properties automatically from the following locations:

• KRB5 Config File (krb5.ini/krb5.conf): If the KRB5_CONFIG environment variable is set and the file exists, the Sync App will obtain the default realm from the specified file. Otherwise, it will attempt to read from the default MIT location based on the OS: C:\ProgramData\MIT\Kerberos5\krb5.ini (Windows) or /etc/krb5.conf (Linux)
• Domain Name and Host: If the Kerberos Realm and Kerberos KDC could not be inferred from another location, the Sync App will infer them from the user-configured domain name and host. This might work in some Windows environments.

The service principal name (SPN) for the Kerberos Domain Controller.

Remarks

If the SPN on the Kerberos Domain Controller is not the same as the URL that you are authenticating to, use this property to set the SPN.

The Keytab file containing your pairs of Kerberos principals and encrypted keys.

Remarks

The Keytab file containing your pairs of Kerberos principals and encrypted keys.

The Kerberos realm of the service.

Remarks

The KerberosServiceRealm is the specify the service Kerberos realm when using cross-realm Kerberos authentication.

In most cases, a single realm and KDC machine are used to perform the Kerberos authentication and this property is not required.

This property is available for complex setups where a different realm and KDC machine are used to obtain an authentication ticket (AS request) and a service ticket (TGS request).

The Kerberos KDC of the service.

Remarks

The KerberosServiceKDC is used to specify the service Kerberos KDC when using cross-realm Kerberos authentication.

In most cases, a single realm and KDC machine are used to perform the Kerberos authentication and this property is not required.

This property is available for complex setups where a different realm and KDC machine are used to obtain an authentication ticket (AS request) and a service ticket (TGS request).

The full file path to an MIT Kerberos credential cache file.

Remarks

This property can be set if you wish to use a credential cache file that was created using the MIT Kerberos Ticket Manager or kinit command.

This section provides a complete list of the SSL properties you can configure in the connection string for this provider.

---

Property	Description
SSLClientCert	The TLS/SSL client certificate store for SSL Client Authentication (2-way SSL).
SSLClientCertType	The type of key store containing the TLS/SSL client certificate.
SSLClientCertPassword	The password for the TLS/SSL client certificate.
SSLClientCertSubject	The subject of the TLS/SSL client certificate.
SSLServerCert	The certificate to be accepted from the server when connecting using TLS/SSL.

The TLS/SSL client certificate store for SSL Client Authentication (2-way SSL).

Remarks

The name of the certificate store for the client certificate.

The SSLClientCertType field specifies the type of the certificate store specified by SSLClientCert. If the store is password protected, specify the password in SSLClientCertPassword.

SSLClientCert is used in conjunction with the SSLClientCertSubject field in order to specify client certificates. If SSLClientCert has a value, and SSLClientCertSubject is set, a search for a certificate is initiated. See SSLClientCertSubject for more information.

Designations of certificate stores are platform-dependent.

The following are designations of the most common User and Machine certificate stores in Windows:

MY	A certificate store holding personal certificates with their associated private keys.
CA	Certifying authority certificates.
ROOT	Root certificates.
SPC	Software publisher certificates.

In Java, the certificate store normally is a file containing certificates and optional private keys.

When the certificate store type is PFXFile, this property must be set to the name of the file. When the type is PFXBlob, the property must be set to the binary contents of a PFX file (for example, PKCS12 certificate store).

The type of key store containing the TLS/SSL client certificate.

Remarks

This property can take one of the following values:

USER - default	For Windows, this specifies that the certificate store is a certificate store owned by the current user. Note that this store type is not available in Java.
MACHINE	For Windows, this specifies that the certificate store is a machine store. Note that this store type is not available in Java.
PFXFILE	The certificate store is the name of a PFX (PKCS12) file containing certificates.
PFXBLOB	The certificate store is a string (base-64-encoded) representing a certificate store in PFX (PKCS12) format.
JKSFILE	The certificate store is the name of a Java key store (JKS) file containing certificates. Note that this store type is only available in Java.
JKSBLOB	The certificate store is a string (base-64-encoded) representing a certificate store in JKS format. Note that this store type is only available in Java.
PEMKEY_FILE	The certificate store is the name of a PEM-encoded file that contains a private key and an optional certificate.
PEMKEY_BLOB	The certificate store is a string (base64-encoded) that contains a private key and an optional certificate.
PUBLIC_KEY_FILE	The certificate store is the name of a file that contains a PEM- or DER-encoded public key certificate.
PUBLIC_KEY_BLOB	The certificate store is a string (base-64-encoded) that contains a PEM- or DER-encoded public key certificate.
SSHPUBLIC_KEY_FILE	The certificate store is the name of a file that contains an SSH-style public key.
SSHPUBLIC_KEY_BLOB	The certificate store is a string (base-64-encoded) that contains an SSH-style public key.
P7BFILE	The certificate store is the name of a PKCS7 file containing certificates.
PPKFILE	The certificate store is the name of a file that contains a PuTTY Private Key (PPK).
XMLFILE	The certificate store is the name of a file that contains a certificate in XML format.
XMLBLOB	The certificate store is a string that contains a certificate in XML format.

The password for the TLS/SSL client certificate.

Remarks

If the certificate store is of a type that requires a password, this property is used to specify that password to open the certificate store.

The subject of the TLS/SSL client certificate.

Remarks

When loading a certificate the subject is used to locate the certificate in the store.

If an exact match is not found, the store is searched for subjects containing the value of the property. If a match is still not found, the property is set to an empty string, and no certificate is selected.

The special value "*" picks the first certificate in the certificate store.

The certificate subject is a comma separated list of distinguished name fields and values. For example, "CN=www.server.com, OU=test, C=US, [email protected]". The common fields and their meanings are shown below.

Field	Meaning
CN	Common Name. This is commonly a host name like www.server.com.
O	Organization
OU	Organizational Unit
L	Locality
S	State
C	Country
E	Email Address

If a field value contains a comma, it must be quoted.

The certificate to be accepted from the server when connecting using TLS/SSL.

Remarks

If using a TLS/SSL connection, this property can be used to specify the TLS/SSL certificate to be accepted from the server. Any other certificate that is not trusted by the machine is rejected.

This property can take the following forms:

Description	Example
A full PEM Certificate (example shortened for brevity)	-----BEGIN CERTIFICATE----- MIIChTCCAe4CAQAwDQYJKoZIhv......Qw== -----END CERTIFICATE-----
A path to a local file containing the certificate	C:\cert.cer
The public key (example shortened for brevity)	-----BEGIN RSA PUBLIC KEY----- MIGfMA0GCSq......AQAB -----END RSA PUBLIC KEY-----
The MD5 Thumbprint (hex values can also be either space or colon separated)	ecadbdda5a1529c58a1e9e09828d70e4
The SHA1 Thumbprint (hex values can also be either space or colon separated)	34a929226ae0819f2ec14b4a3d904f801cbb150d

If not specified, any certificate trusted by the machine is accepted.

Use '*' to signify to accept all certificates. Note that this is not recommended due to security concerns.

This section provides a complete list of the Firewall properties you can configure in the connection string for this provider.

---

Property	Description
FirewallType	The protocol used by a proxy-based firewall.
FirewallServer	The name or IP address of a proxy-based firewall.
FirewallPort	The TCP port for a proxy-based firewall.
FirewallUser	The user name to use to authenticate with a proxy-based firewall.
FirewallPassword	A password used to authenticate to a proxy-based firewall.

The protocol used by a proxy-based firewall.

Remarks

This property specifies the protocol that the Sync App will use to tunnel traffic through the FirewallServer proxy. Note that by default, the Sync App connects to the system proxy; to disable this behavior and connect to one of the following proxy types, set ProxyAutoDetect to false.

Type	Default Port	Description
TUNNEL	80	When this is set, the Sync App opens a connection to Apache Phoenix and traffic flows back and forth through the proxy.
SOCKS4	1080	When this is set, the Sync App sends data through the SOCKS 4 proxy specified by FirewallServer and FirewallPort and passes the FirewallUser value to the proxy, which determines if the connection request should be granted.
SOCKS5	1080	When this is set, the Sync App sends data through the SOCKS 5 proxy specified by FirewallServer and FirewallPort. If your proxy requires authentication, set FirewallUser and FirewallPassword to credentials the proxy recognizes.

To connect to HTTP proxies, use ProxyServer and ProxyPort. To authenticate to HTTP proxies, use ProxyAuthScheme, ProxyUser, and ProxyPassword.

The name or IP address of a proxy-based firewall.

Remarks

This property specifies the IP address, DNS name, or host name of a proxy allowing traversal of a firewall. The protocol is specified by FirewallType: Use FirewallServer with this property to connect through SOCKS or do tunneling. Use ProxyServer to connect to an HTTP proxy.

Note that the Sync App uses the system proxy by default. To use a different proxy, set ProxyAutoDetect to false.

The TCP port for a proxy-based firewall.

Remarks

This specifies the TCP port for a proxy allowing traversal of a firewall. Use FirewallServer to specify the name or IP address. Specify the protocol with FirewallType.

The user name to use to authenticate with a proxy-based firewall.

Remarks

The FirewallUser and FirewallPassword properties are used to authenticate against the proxy specified in FirewallServer and FirewallPort, following the authentication method specified in FirewallType.

A password used to authenticate to a proxy-based firewall.

Remarks

This property is passed to the proxy specified by FirewallServer and FirewallPort, following the authentication method specified by FirewallType.

This section provides a complete list of the Proxy properties you can configure in the connection string for this provider.

---

Property	Description
ProxyAutoDetect	This indicates whether to use the system proxy settings or not.
ProxyServer	The hostname or IP address of a proxy to route HTTP traffic through.
ProxyPort	The TCP port the ProxyServer proxy is running on.
ProxyAuthScheme	The authentication type to use to authenticate to the ProxyServer proxy.
ProxyUser	A user name to be used to authenticate to the ProxyServer proxy.
ProxyPassword	A password to be used to authenticate to the ProxyServer proxy.
ProxySSLType	The SSL type to use when connecting to the ProxyServer proxy.
ProxyExceptions	A semicolon separated list of destination hostnames or IPs that are exempt from connecting through the ProxyServer .

This indicates whether to use the system proxy settings or not.

Remarks

This takes precedence over other proxy settings, so you'll need to set ProxyAutoDetect to FALSE in order use custom proxy settings.

To connect to an HTTP proxy, see ProxyServer. For other proxies, such as SOCKS or tunneling, see FirewallType.

The hostname or IP address of a proxy to route HTTP traffic through.

Remarks

The hostname or IP address of a proxy to route HTTP traffic through. The Sync App can use the HTTP, Windows (NTLM), or Kerberos authentication types to authenticate to an HTTP proxy.

If you need to connect through a SOCKS proxy or tunnel the connection, see FirewallType.

By default, the Sync App uses the system proxy. If you need to use another proxy, set ProxyAutoDetect to false.

The TCP port the ProxyServer proxy is running on.

Remarks

The port the HTTP proxy is running on that you want to redirect HTTP traffic through. Specify the HTTP proxy in ProxyServer. For other proxy types, see FirewallType.

The authentication type to use to authenticate to the ProxyServer proxy.

Remarks

This value specifies the authentication type to use to authenticate to the HTTP proxy specified by ProxyServer and ProxyPort.

Note that the Sync App will use the system proxy settings by default, without further configuration needed; if you want to connect to another proxy, you will need to set ProxyAutoDetect to false, in addition to ProxyServer and ProxyPort. To authenticate, set ProxyAuthScheme and set ProxyUser and ProxyPassword, if needed.

The authentication type can be one of the following:

• BASIC: The Sync App performs HTTP BASIC authentication.
• DIGEST: The Sync App performs HTTP DIGEST authentication.
• NEGOTIATE: The Sync App retrieves an NTLM or Kerberos token based on the applicable protocol for authentication.
• PROPRIETARY: The Sync App does not generate an NTLM or Kerberos token. You must supply this token in the Authorization header of the HTTP request.

If you need to use another authentication type, such as SOCKS 5 authentication, see FirewallType.

A user name to be used to authenticate to the ProxyServer proxy.

Remarks

The ProxyUser and ProxyPassword options are used to connect and authenticate against the HTTP proxy specified in ProxyServer.

You can select one of the available authentication types in ProxyAuthScheme. If you are using HTTP authentication, set this to the user name of a user recognized by the HTTP proxy. If you are using Windows or Kerberos authentication, set this property to a user name in one of the following formats:

user@domain
domain\user

A password to be used to authenticate to the ProxyServer proxy.

Remarks

This property is used to authenticate to an HTTP proxy server that supports NTLM (Windows), Kerberos, or HTTP authentication. To specify the HTTP proxy, you can set ProxyServer and ProxyPort. To specify the authentication type, set ProxyAuthScheme.

If you are using HTTP authentication, additionally set ProxyUser and ProxyPassword to HTTP proxy.

If you are using NTLM authentication, set ProxyUser and ProxyPassword to your Windows password. You may also need these to complete Kerberos authentication.

For SOCKS 5 authentication or tunneling, see FirewallType.

By default, the Sync App uses the system proxy. If you want to connect to another proxy, set ProxyAutoDetect to false.

The SSL type to use when connecting to the ProxyServer proxy.

Remarks

This property determines when to use SSL for the connection to an HTTP proxy specified by ProxyServer. This value can be AUTO, ALWAYS, NEVER, or TUNNEL. The applicable values are the following:

AUTO	Default setting. If the URL is an HTTPS URL, the Sync App will use the TUNNEL option. If the URL is an HTTP URL, the component will use the NEVER option.
ALWAYS	The connection is always SSL enabled.
NEVER	The connection is not SSL enabled.
TUNNEL	The connection is through a tunneling proxy. The proxy server opens a connection to the remote host and traffic flows back and forth through the proxy.

A semicolon separated list of destination hostnames or IPs that are exempt from connecting through the ProxyServer .

Remarks

The ProxyServer is used for all addresses, except for addresses defined in this property. Use semicolons to separate entries.

Note that the Sync App uses the system proxy settings by default, without further configuration needed; if you want to explicitly configure proxy exceptions for this connection, you need to set ProxyAutoDetect = false, and configure ProxyServer and ProxyPort. To authenticate, set ProxyAuthScheme and set ProxyUser and ProxyPassword, if needed.

This section provides a complete list of the Logging properties you can configure in the connection string for this provider.

---

Property	Description
LogModules	Core modules to be included in the log file.

Core modules to be included in the log file.

Remarks

Only the modules specified (separated by ';') will be included in the log file. By default all modules are included.

See the Logging page for an overview.

This section provides a complete list of the Schema properties you can configure in the connection string for this provider.

---

Property	Description
Location	A path to the directory that contains the schema files defining tables, views, and stored procedures.
BrowsableSchemas	This property restricts the schemas reported to a subset of the available schemas. For example, BrowsableSchemas=SchemaA,SchemaB,SchemaC.
Tables	This property restricts the tables reported to a subset of the available tables. For example, Tables=TableA,TableB,TableC.
Views	Restricts the views reported to a subset of the available tables. For example, Views=ViewA,ViewB,ViewC.

A path to the directory that contains the schema files defining tables, views, and stored procedures.

Remarks

The path to a directory which contains the schema files for the Sync App (.rsd files for tables and views, .rsb files for stored procedures). The folder location can be a relative path from the location of the executable. The Location property is only needed if you want to customize definitions (for example, change a column name, ignore a column, and so on) or extend the data model with new tables, views, or stored procedures.

If left unspecified, the default location is "%APPDATA%\\CData\\ApachePhoenix Data Provider\\Schema" with %APPDATA% being set to the user's configuration directory:

Platform	%APPDATA%
Windows	The value of the APPDATA environment variable
Linux	~/.config

This property restricts the schemas reported to a subset of the available schemas. For example, BrowsableSchemas=SchemaA,SchemaB,SchemaC.

Remarks

Listing the schemas from databases can be expensive. Providing a list of schemas in the connection string improves the performance.

This property restricts the tables reported to a subset of the available tables. For example, Tables=TableA,TableB,TableC.

Remarks

Listing the tables from some databases can be expensive. Providing a list of tables in the connection string improves the performance of the Sync App.

This property can also be used as an alternative to automatically listing views if you already know which ones you want to work with and there would otherwise be too many to work with.

Specify the tables you want in a comma-separated list. Each table should be a valid SQL identifier with any special characters escaped using square brackets, double-quotes or backticks. For example, Tables=TableA,[TableB/WithSlash],WithCatalog.WithSchema.`TableC With Space`.

Note that when connecting to a data source with multiple schemas or catalogs, you will need to provide the fully qualified name of the table in this property, as in the last example here, to avoid ambiguity between tables that exist in multiple catalogs or schemas.

Restricts the views reported to a subset of the available tables. For example, Views=ViewA,ViewB,ViewC.

Remarks

Listing the views from some databases can be expensive. Providing a list of views in the connection string improves the performance of the Sync App.

This property can also be used as an alternative to automatically listing views if you already know which ones you want to work with and there would otherwise be too many to work with.

Specify the views you want in a comma-separated list. Each view should be a valid SQL identifier with any special characters escaped using square brackets, double-quotes or backticks. For example, Views=ViewA,[ViewB/WithSlash],WithCatalog.WithSchema.`ViewC With Space`.

Note that when connecting to a data source with multiple schemas or catalogs, you will need to provide the fully qualified name of the table in this property, as in the last example here, to avoid ambiguity between tables that exist in multiple catalogs or schemas.

This section provides a complete list of the Miscellaneous properties you can configure in the connection string for this provider.

---

Property	Description
AllowPreparedStatement	Prepare a query statement before its execution.
MaxRows	Specifies the maximum number of rows the provider requests and returns for all tables and views.
Other	These hidden properties are used only in specific use cases.
Pagesize	The number of rows which will be returned for each frame request.
QueryPassthrough	This option passes the query to the Apache Phoenix server as is.
Timeout	The value in seconds until the timeout error is thrown, canceling the operation.

Prepare a query statement before its execution.

Remarks

If the AllowPreparedStatement property is set to false, statements are parsed each time they are executed. Setting this property to false can be useful if you are executing many different queries only once.

Specifies the maximum number of rows the provider requests and returns for all tables and views.

Remarks

This maximum applies across all Frames. It is not applied to Frames individually.

These hidden properties are used only in specific use cases.

Remarks

The properties listed below are available for specific use cases. Normal driver use cases and functionality should not require these properties.

Specify multiple properties in a semicolon-separated list.

Integration and Formatting

DefaultColumnSize	Sets the default length of string fields when the data source does not provide column length in the metadata. The default value is 2000.
ConvertDateTimeToGMT	Determines whether to convert date-time values to GMT, instead of the local time of the machine.
RecordToFile=filename	Records the underlying socket data transfer to the specified file.

The number of rows which will be returned for each frame request.

Remarks

Setting a lower number will result in more requests made for data retrieval, while setting a really big number could result in OutOfMemory errors.

This option passes the query to the Apache Phoenix server as is.

Remarks

When this is set, queries are passed through directly to Apache Phoenix.

The value in seconds until the timeout error is thrown, canceling the operation.

Remarks

If Timeout = 0, operations do not time out. The operations run until they complete successfully or until they encounter an error condition.

If Timeout expires and the operation is not yet complete, the Sync App throws an exception.