Linux DSN Configuration

This section describes how to set up ODBC connectivity and configure DSNs on several Linux distributions: Debian-based systems, like Ubuntu, and Red Hat Linux platforms, like Red Hat Enterprise Linux (RHEL), CentOS, and Fedora.

Minimum Linux Versions

Here are the minimum supported versions for Red Hat-based and Debian-based systems:


OS	Min. Version
Ubuntu	11.04
Debian	7
RHEL	6.9
CentOS	6.9
Fedora	13
SUSE	12.1

Installing the Driver Dependencies

Run the following commands as root or with sudo to install the necessary dependencies:

Debian/Ubuntu:

apt-get install libc6 libstdc++6 zlib1g libgcc1

RHEL/CentOS/Fedora:
```
yum install glibc libstdc++ zlib libgcc
```

Here are the corresponding libraries required by the driver:


Debian/Ubuntu Package	RHEL/CentOS/Fedora Package	File
libc6	glibc	linux-vdso.1
libc6	glibc	libm.so.6
libc6	glibc	librt.so.1
libc6	glibc	libdl.so.2
libc6	glibc	libpthread.so.0
libc6	glibc	libc.so.6
libc6	glibc	ld-linux-x86-64.so.2
libstdc++6	libstdc++	libstdc++.so.6
zlib1g	zlib	libz.so.1
libgcc1	libgcc	libgcc_s.so.1

Installing the Driver

You can use standard package management systems to install the driver.

On Debian-based systems, like Ubuntu, run the following command with root or sudo:

dpkg -i /path/to/driver/setup/SharePointODBCDriverforUnix.deb

On systems that support the RPM package format, run the following command with root or sudo:

rpm -ivh /path/to/driver/SharePointODBCDriverforUnix.rpm

Licensing the Driver

Run the following commands to license the driver. To activate a trial, omit the <key> input.

cd /opt/cdata/cdata-odbc-driver-for-sharepoint/bin/
sudo ./install-license.sh <key>

Connecting through the Driver Manager

The driver manager loads the driver and passes function calls from the application to the driver. You need to register the driver with the driver manager and you define DSNs in the driver manager's configuration files.

The driver installation registers the driver with the unixODBC driver manager and creates a system DSN. The unixODBC driver manager can be used from Python and from many other applications. Your application may embed another driver manager.

Creating the DSN

See Using unixODBC to install unixODBC and configure DSNs. See Using the DataDirect Driver Manager to create a DSN to connect to OBIEE, Informatica, and SAS.

Connecting to Microsoft SharePoint

Regardless of whether you will connect online or on-premesis, what architecture will be used, and which Lists and Documents will be accessed, connecting to Microsoft SharePoint requires exactly two things:

Set the URL connection property.
Set the appropriate authentication properties for your working environment.

Setting URL:

Microsoft SharePoint works with all Lists and Documents in the global Microsoft Sharepoint site, or all Lists and Documents at individual sites.

To work with all Lists and Documents in the global Microsoft Sharepoint site, set the URL connection property to your Site Collection URL. For example:

https://teams.contoso.com

To work with all Lists and Documents at an individual site, set the URL connection property to your individual site URL. For example:

 https://teams.contoso.com/TeamA

The following sections describe how to set the appropriate authentication properties for your working environment. For information about how to create a custom OAuth application (required for use with AzureAD in a Web application; optional for AzureAD access via a Desktop application or a Headless Server), see Creating a Custom OAuth Application.

Microsoft SharePoint Online

Set SharePointEdition to "SharePoint Online" and set the User and Password to the credentials you use to log onto SharePoint, for example, the credentials to your Microsoft Online Services account.

Microsoft SharePoint online supports a number of cloud-based architectures, each of which supports a different set of authentication schemes:

AzureAD
Single sign-on (SSO) via the ADFS, Okta, OneLogin, or PingFederate SSO identity provider
Azure MSI
Azure Password
OAuthJWT
SharePointOAuth

If the user account domain is different from the domain configured with the identity provider, set SSODomain to the latter. This property may be required for any SSO.

AzureAD

Azure Active Directory (AzureAD) is a connection type that leverages OAuth to authenticate. OAuth requires the authenticating user to interact with Microsoft SharePoint using an internet browser. The driver facilitates this in several ways as described below. Set your AuthScheme to AzureAD. The AzureAD flows described below assume that you have done so.

Your organization may require Admin Consent when authorizing a new AzureAD application for your Azure Tenant. In all AzureAD flows, any initial installation and use of an AzureAD application requires that an administrator approve the application for their Azure Tenant. For details, see Creating a Custom OAuth Application.

Desktop Applications

CData provides an embedded OAuth application that simplifies OAuth desktop authentication. Alternatively, you can create a custom AzureAD application. See Creating a Custom OAuth Application for information about creating custom applications and reasons for doing so.

For authentication, the only difference between the two methods is that you must set two additional connection properties when using custom AzureAD applications.

After setting the following connection properties, you are ready to connect:

Custom applications only:
- OAuthClientId: The client Id in your application settings.
- OAuthClientSecret: The client secret in your application settings.

When you connect the driver opens the OAuth endpoint in your default browser. Log in and grant permissions to the application.

Headless Machines

To configure the driver to use OAuth with a user account on a headless machine, you must authenticate on another device that has an internet browser.

Choose one of these two options:
- Option 1: Obtain the OAuthVerifier value as described in "Obtain and Exchange a Verifier Code" below.
- Option 2: Install the driver on another machine and transfer the OAuth authentication values after you authenticate through the usual browser-based flow, as described in "Transfer OAuth Settings" below.
Now configure the driver to automatically refresh the access token from the headless machine.

Option 1: Obtain and Exchange a Verifier Code

To obtain a verifier code, you must authenticate at the OAuth authorization URL.

Follow the steps below to authenticate from the machine with an internet browser and obtain the OAuthVerifier connection property.

Choose one of these options:
- If you are using the Embedded OAuth Application click Microsoft SharePoint OAuth endpoint to open the endpoint in your browser.
- If you are using a custom OAuth application, create the Authorization URL by setting the following properties:
  - InitiateOAuth: OFF.
  - OAuthClientId: The client Id assigned when you registered your application.
  - OAuthClientSecret: The client secret assigned when you registered your application.
  Now call the GetOAuthAuthorizationURL stored procedure with the appropriate CallbackURL. Open the URL returned by the stored procedure in a browser.
Log in and grant permissions to the driver. You are redirected to the callback URL, which contains the verifier code.
Save the value of the verifier code. Later you will set this in the OAuthVerifier connection property.

Next, you must exchange the OAuth verifier code for OAuth refresh and access tokens. Set the following properties:

On the headless machine, set the following connection properties to obtain the OAuth authentication values:

InitiateOAuth: REFRESH.
OAuthVerifier: The verifier code.
OAuthSettingsLocation: The location of the file where the driver saves the OAuth token values that persist across connections.
Custom applications only:
- OAuthClientId: The client Id in your custom OAuth application settings.
- OAuthClientSecret: The client secret in the custom OAuth application settings.

After the OAuth settings file is generated, you must re-set the following properties to connect:

InitiateOAuth: REFRESH.
OAuthSettingsLocation: The location containing the encrypted OAuth authentication values. Make sure this location grants read and write permissions to the driver to enable the automatic refreshing of the access token.
Custom applications only:
- OAuthClientId: The client Id assigned when you registered your application.
- OAuthClientSecret: The client secret assigned when you registered your application.

Option 2: Transfer OAuth Settings

Prior to connecting on a headless machine, you must create and install a connection with the driver on a device that supports an internet browser. Set the connection properties as described in "Desktop Applications" above.

After completing the instructions in "Desktop Applications", the resulting authentication values are encrypted and written to the location specified by OAuthSettingsLocation. The default filename is OAuthSettings.txt.

Once you have successfully tested the connection, copy the OAuth settings file to your headless machine.

On the headless machine, set the following connection properties to connect to data:

InitiateOAuth: REFRESH.
OAuthSettingsLocation: The location of your OAuth settings file. Make sure this location gives read and write permissions to the driver to enable the automatic refreshing of the access token.
Custom applications only:
- OAuthClientId: The client Id assigned when you registered your application.
- OAuthClientSecret: The client secret assigned when you registered your application.

Single Sign-On Identity Providers

ADFS

Set the AuthScheme to ADFS. You must set the following connection properties:

User: The ADFS user.
Password: The user's ADFS password.
SSODomain (optional): The domain configured with the ADFS identity provider.

Example connection string:

AuthScheme=ADFS;User=ADFSUserName;Password=ADFSPassword;URL='http://sharepointserver/mysite';

Okta

Set the AuthScheme to Okta. The following connection properties are used to connect to Okta:

User: The Okta user.
Password: The user's Okta password.
SSODomain (optional): The domain configured with the OKTA identity provider.

Example connection string:

AuthScheme=Okta;User=oktaUserName;Password=oktaPassword;URL='http://sharepointserver/mysite';

OneLogin

Set the AuthScheme to OneLogin. The following connection properties are used to connect to OneLogin:

User: The OneLogin user.
Password: The user's OneLogin password.
SSODomain (optional): The domain configured with the OneLogin identity provider.

Example connection string:

AuthScheme=OneLogin;User=OneLoginUserName;Password=OneLoginPassword;URL='http://sharepointserver/mysite';

PingFederate

Set the AuthScheme to PingFederate. The following connection properties are used to connect to PingFederate:

User: The PingFederate user.
Password: PingFederate password for the user.
SSODomain (optional): The domain configured with the PingFederate identity provider.

Example connection string:

AuthScheme=PingFederate;User=PingFederateUserName;Password=PingFederatePassword;URL='http://sharepointserver/mysite';

Azure MSI

If you are running Microsoft SharePoint on an Azure VM, you can leverage Azure Managed Service Identity (MSI) credentials to connect:

AuthScheme: AzureMSI.

The MSI credentials are automatically obtained for authentication.

Azure Password

To connect using your Azure dredentials directly, specify the following connection properties:

AuthScheme: AzurePassword
User: The user account used to connect to Azure
Password: The password used to connect to Azure
AzureTenant: Directory (tenant) ID, found on the Overview page of the OAuth application used to authenticate to Microsoft SharePoint on Azure.

OAuthJWT Certificate

Set the AuthScheme to OAUTHJWT. The following connection properties are used to connect to Microsoft SharePoint:

AzureTenant: The tenant you wish to connect to.
OAuthJWTCert: The JWT certificate store.
OAuthJWTCertType: The type of key store containing the JWT certificate.
OAuthJWTIssuer: The OAuth client Id.
OAuthJWTCertPassword: The password associated with the JWT certificate. Set this is your certificate type requires a password.

SharePointOAuth

Set the AuthScheme to SharePointOAuth. The following connection properties are used to connect to SharePointOAuth:

Schema: REST.
InitiateOAuth: GETANDREFRESH.
OAuthClientId: The application's identity/Client Id.
OAuthClientSecret: The application's Client Secret.

Example connection string:

SharePointEdition='SharepointOnline';URL=https://rssbuscrm.sharepoint.com;Schema=REST;AuthScheme=SharepointOAuth;InitiateOAuth=GETANDREFRESH;OAuthClientId=11111111-1111-1111-1111-111111111111;OAuthClientSecret=1111111111111/11111111111111/11111111111111=;

This AuthScheme works with the custom OAuth application. To generate credentials from a custom OAuth application, see Creating a Custom OAuth Application.

Microsoft SharePoint On-Premises

Microsoft SharePoint On-Premises supports a number of premise-based architectures:

Windows (NTLM)
Kerberos
ADFS
Anonymous Access

Set SharePointEdition to "SharePoint On-Premises" to use the following authentication types.

Windows (NTLM)

This is the most common authentication type. As such, the driver is preconfigured to use NTLM as the default; simply set the Windows User and Password to connect.

Kerberos

Set the AuthScheme to NEGOTIATE, and then set the following Kerberos connection properties:

KerberosKDC: The host name or IP Address of your Kerberos KDC machine.
KerberosSPN: The service and host of the Microsoft SharePoint Kerberos Principal. This is the value prior to the '@' symbol (for instance, MyService/MyHost) of the principal value (for instance, MyService/MyHost@EXAMPLE.COM).

For details on how to authenticate with Kerberos, see Using Kerberos.

ADFS

Set the AuthScheme to ADFS, and then set the following connection properties:

User: The ADFS user.
Password: ADFS password for the user.
SSOLoginURL: The WS-trust endpoint of the ADFS server.

You also need the to set SSOProperties to authenticate to ADFS. Specify the value of the RelyingParty parameter; it is located on the ADFS server for Sharepoint. Example connection string:

AuthScheme=ADFS;User=ADFSUserName;Password=ADFSPassword;SSOLoginURL='https://<authority>/adfs/services/trust/2005/usernamemixed';SSO Properties ='RelyingParty=urn:sharepoint:sp2016;';

Anonymous Access

Set the AuthScheme to NONE along with the URL.

Refreshing OAuth Values

The driver can refresh the temporary OAuth access tokens obtained during the browser-based OAuth authentication exchange. By default, the driver saves the encrypted tokens in the odbc.ini file corresponding to the DSN. Access to this odbc.ini file can be restricted in the case of System DSNs.

To enable the automatic token exchange, you can give the driver write access to the system odbc.ini. Or, you can set the OAuthSettingsLocation connection property to an alternate file path, to which the driver would have read and write access.

    OAuthSettingsLocation=/tmp/oauthsettings.txt

Installing Dependencies for OAuth Authentication

The OAuth authentication standard requires the authenticating user to interact with Microsoft SharePoint, using a web-browser. If the first OAuth interaction is to be done on the same machine the driver is installed on, for example, a desktop application, the driver needs access to the xdg-open program, which opens the default browser.

To satisfy this dependency, install the corresponding package with your package manager:


Debian/Ubuntu Package	RHEL/CentOS/Fedora Package	File
xdg-utils	xdg-utils	xdg-open

Set the Driver Encoding

The ODBC drivers need to specify which encoding to use with the ODBC Driver Manager. By default, the CData ODBC Drivers for Unix are configured to use UTF-16 which is compatible with unixODBC, but other Driver Managers may require alternative encoding.

Alternatively, if you are using the ODBC driver from an application that uses the ANSI ODBC API it may be necessary to set the ANSI code page. For example, to import Japanese characters in an ANSI application, you can specify the code page in the config file '/opt/cdata/cdata-odbc-driver-for-sharepoint/lib/cdata.odbc.sharepoint.ini':

[Driver]
AnsiCodePage = 932

ODBC Driver for Microsoft SharePoint

Linux DSN Configuration

Minimum Linux Versions

Installing the Driver Dependencies

Installing the Driver

Licensing the Driver

Connecting through the Driver Manager

Creating the DSN

Connecting to Microsoft SharePoint

Microsoft SharePoint Online

AzureAD

Desktop Applications

Headless Machines

Single Sign-On Identity Providers

ADFS

Okta

OneLogin

PingFederate

Azure MSI

Azure Password

OAuthJWT Certificate

SharePointOAuth

Microsoft SharePoint On-Premises

Windows (NTLM)

Kerberos

ADFS

Anonymous Access

Refreshing OAuth Values

Installing Dependencies for OAuth Authentication

Set the Driver Encoding