Adding a Connection to Apache HBase

To add a connection to Apache HBase:

1. In the application console, navigate to the Connections page.
2. At the Add Connections panel, select the icon for the connection you want to add.
3. If the Apache HBase icon is not available, click the Add More icon to download and install the Apache HBase connector from the CData site.

For required properties, see the Settings tab.

For connection properties that are not typically required, see the Advanced tab.

Before You Connect

Hadoop distributions can contain many different interfaces, default port settings, and means of starting and stopping the HBase REST server.

In most distributions, you can start the HBase REST server in the foreground by running hbase rest start -p <port>.

For further information about the HBase REST server, consult your Hadoop distribution's documentation.

Connecting to Apache HBase

The CData Sync App connects to Apache HBase via the HBase REST (Stargate) server. Set the following to connect to Apache HBase:

• Server: The host name, IP address, or URL of the server hosting Apache HBase. If there are multiple nodes, use the host name, IP address, or URL of the machine running the REST (Stargate) server.
• Port: The port for the Apache HBase REST (Stargate) server.

Authenticating to Apache HBase

The CData Sync App supports the following authentication schemes:

• Anonymous
• Basic
• Negotiate (Kerberos)

Anonymous

By default, no authentication (alternatively known as "anonymous" authentication) is used. Set AuthScheme to None to explicitly enforce no authentication.

Basic

To use Basic authentication, set the following:

• AuthScheme: Set this to Basic.
• User: Set this to the Apache HBase user.
• Password: Set this to the Apache HBase password.

Kerberos

To authenticate to Apache HBase with Kerberos, set AuthScheme to NEGOTIATE.

Authenticating to Apache HBase via Kerberos requires you to define authentication properties and to choose how Kerberos should retrieve authentication tickets.

Retrieve Kerberos Tickets

Kerberos tickets are used to authenticate the requester's identity. The use of tickets instead of formal logins/passwords eliminates the need to store passwords locally or send them over a network. Users are reauthenticated (tickets are refreshed) whenever they log in at their local computer or enter kinit USER at the command prompt.

The Sync App provides three ways to retrieve the required Kerberos ticket, depending on whether or not the KRB5CCNAME and/or KerberosKeytabFile variables exist in your environment.

MIT Kerberos Credential Cache File

This option enables you to use the MIT Kerberos Ticket Manager or kinit command to get tickets. With this option there is no need to set the User or Password connection properties.

This option requires that KRB5CCNAME has been created in your system.

To enable ticket retrieval via MIT Cerberos Credential Cache Files:

1. Ensure that the KRB5CCNAME variable is present in your environment.
2. Set KRB5CCNAME to a path that points to your credential cache file. (For example, C:\krb_cache\krb5cc_0 or /tmp/krb5cc_0.) The credential cache file is created when you use the MIT Kerberos Ticket Manager to generate your ticket.
3. To obtain a ticket:
   1. Open the MIT Kerberos Ticket Manager application.
   2. Click Get Ticket.
   3. Enter your principal name and password.
   4. Click OK.

   If the ticket is successfully obtained, the ticket information appears in Kerberos Ticket Manager and is stored in the credential cache file.

The Sync App uses the cache file to obtain the Kerberos ticket to connect to Apache HBase.

Note: If you would prefer not to edit KRB5CCNAME, you can use the KerberosTicketCache property to set the file path manually. After this is set, the Sync App uses the specified cache file to obtain the Kerberos ticket to connect to Apache HBase.

Keytab File

If your environment lacks the KRB5CCNAME environment variable, you can retrieve a Kerberos ticket using a Keytab File.

To use this method, set the User property to the desired username, and set the KerberosKeytabFile property to a file path pointing to the keytab file associated with the user.

User and Password

If your environment lacks the KRB5CCNAME environment variable and the KerberosKeytabFile property has not been set, you can retrieve a ticket using a user and password combination.

To use this method, set the User and Password properties to the user/password combination that you use to authenticate with Apache HBase.

Enabling Cross-Realm Authentication

More complex Kerberos environments can require cross-realm authentication where multiple realms and KDC servers are used. For example, they might use one realm/KDC for user authentication, and another realm/KDC for obtaining the service ticket.

To enable this kind of cross-realm authentication, set the KerberosRealm and KerberosKDC properties to the values required for user authentication. Also, set the KerberosServiceRealm and KerberosServiceKDC properties to the values required to obtain the service ticket.

Fine Tuning Data Access

You can use the following properties to configure automatic data type detection, which is enabled by default.

• TypeDetectionScheme: You can use this property to enable or disable automatic type detection based on the value specified in RowScanDepth.
• RowScanDepth: This property determines the number of rows that will be scanned to determine column data types.

This section details a selection of advanced features of the Apache HBase Sync App.

User Defined Views

The Sync App allows you to define virtual tables, called user defined views, whose contents are decided by a pre-configured query. These views are useful when you cannot directly control queries being issued to the drivers. See User Defined Views for an overview of creating and configuring custom views.

SSL Configuration

Use SSL Configuration to adjust how Sync App handles TLS/SSL certificate negotiations. You can choose from various certificate formats; see the SSLServerCert property under "Connection String Options" for more information.

Firewall and Proxy

Configure the Sync App for compliance with Firewall and Proxy, including Windows proxies and HTTP proxies. You can also set up tunnel connections.

Query Processing

The Sync App offloads as much of the SELECT statement processing as possible to Apache HBase and then processes the rest of the query in memory (client-side).

See Query Processing for more information.

Logging

See Logging for an overview of configuration settings that can be used to refine CData logging. For basic logging, you only need to set two connection properties, but there are numerous features that support more refined logging, where you can select subsets of information to be logged using the LogModules connection property.

Customizing the SSL Configuration

By default, the Sync App attempts to negotiate SSL/TLS by checking the server's certificate against the system's trusted certificate store.

To specify another certificate, see the SSLServerCert property for the available formats to do so.

Connecting Through a Firewall or Proxy

HTTP Proxies

To connect through the Windows system proxy, you do not need to set any additional connection properties. To connect to other proxies, set ProxyAutoDetect to false.

In addition, to authenticate to an HTTP proxy, set ProxyAuthScheme, ProxyUser, and ProxyPassword, in addition to ProxyServer and ProxyPort.

Other Proxies

Set the following properties:

• To use a proxy-based firewall, set FirewallType, FirewallServer, and FirewallPort.
• To tunnel the connection, set FirewallType to TUNNEL.
• To authenticate, specify FirewallUser and FirewallPassword.
• To authenticate to a SOCKS proxy, additionally set FirewallType to SOCKS5.

The CData Sync App models the Apache HBase REST APIs as relational tables and stored procedures that can be accessed with standard SQL. This enables access from standards-based tools.

The table definitions are dynamically retrieved. When you connect, the Sync App connects to Apache HBase and gets the list of tables and the metadata for the tables by querying the HBase REST server. Any changes to the remote data are immediately reflected in your queries.

Stored Procedures are function-like interfaces to the data source. Stored procedures model actions that typically cannot be represented as SELECT, INSERT, UPDATE, or DELETE statements. The stored procedures of the Sync App surface the capabilities of the DDL (data definition language) in Apache HBase.

The connection string properties are the various options that can be used to establish a connection. This section provides a complete list of the options you can configure in the connection string for this provider. Click the links for further details.

For more information on establishing a connection, see Establishing a Connection.

Authentication

---

Property	Description
AuthScheme	The scheme used for authentication. Accepted entries are None, Basic, and Negotiate (Kerberos). None is the default.
Server	The host name, IP address, or URL of the Apache HBase REST server.
Port	The port for the Apache HBase REST (Stargate) server.
User	The user who is authenticating to Apache HBase.
Password	The password used to authenticate to Apache HBase.

Kerberos

---

Property	Description
KerberosKDC	The Kerberos Key Distribution Center (KDC) service used to authenticate the user.
KerberosRealm	The Kerberos Realm used to authenticate the user.
KerberosSPN	The service principal name (SPN) for the Kerberos Domain Controller.
KerberosKeytabFile	The Keytab file containing your pairs of Kerberos principals and encrypted keys.
KerberosServiceRealm	The Kerberos realm of the service.
KerberosServiceKDC	The Kerberos KDC of the service.
KerberosTicketCache	The full file path to an MIT Kerberos credential cache file.

SSL

---

Property	Description
SSLClientCert	The TLS/SSL client certificate store for SSL Client Authentication (2-way SSL).
SSLClientCertType	The type of key store containing the TLS/SSL client certificate.
SSLClientCertPassword	The password for the TLS/SSL client certificate.
SSLClientCertSubject	The subject of the TLS/SSL client certificate.
SSLServerCert	The certificate to be accepted from the server when connecting using TLS/SSL.

Firewall

---

Property	Description
FirewallType	The protocol used by a proxy-based firewall.
FirewallServer	The name or IP address of a proxy-based firewall.
FirewallPort	The TCP port for a proxy-based firewall.
FirewallUser	The user name to use to authenticate with a proxy-based firewall.
FirewallPassword	A password used to authenticate to a proxy-based firewall.

Proxy

---

Property	Description
ProxyAutoDetect	This indicates whether to use the system proxy settings or not.
ProxyServer	The hostname or IP address of a proxy to route HTTP traffic through.
ProxyPort	The TCP port the ProxyServer proxy is running on.
ProxyAuthScheme	The authentication type to use to authenticate to the ProxyServer proxy.
ProxyUser	A user name to be used to authenticate to the ProxyServer proxy.
ProxyPassword	A password to be used to authenticate to the ProxyServer proxy.
ProxySSLType	The SSL type to use when connecting to the ProxyServer proxy.
ProxyExceptions	A semicolon separated list of destination hostnames or IPs that are exempt from connecting through the ProxyServer .

Logging

---

Property	Description
LogModules	Core modules to be included in the log file.

Schema

---

Property	Description
Location	A path to the directory that contains the schema files defining tables, views, and stored procedures.
BrowsableSchemas	This property restricts the schemas reported to a subset of the available schemas. For example, BrowsableSchemas=SchemaA,SchemaB,SchemaC.
Tables	This property restricts the tables reported to a subset of the available tables. For example, Tables=TableA,TableB,TableC.
Views	Restricts the views reported to a subset of the available tables. For example, Views=ViewA,ViewB,ViewC.

Miscellaneous

---

Property	Description
ColumnEncoding	The Encoding used for the column values. Accepted entries are None, UTF8, and BASE64. None is the default.
DatetimeFormat	The format used when inserting datetime values into the database.
ExposeColumnTimestamp	Specifies whether to expose the cell timestamp as a separate column when executing the SELECT Statement.
IncludeDisabledTables	Specifies whether to retrieve disabled tables.
MaxRows	Limits the number of rows returned when no aggregation or GROUP BY is used in the query. This takes precedence over LIMIT clauses.
Other	These hidden properties are used only in specific use cases.
Pagesize	The maximum number of results to return per page from Apache HBase.
PseudoColumns	This property indicates whether or not to include pseudo columns as columns to the table.
ResetTableMetadataOnDelete	Specifies whether to reset the cache table after executing the DELETE Statement.
RetrieveSelectedColumnsOnly	Specifies whether to retrieve selected columns only when executing a SELECT statement.
RowScanDepth	The maximum number of rows to scan to look for the columns available in a table.
ScannerCaching	Specify a scanner cache that will be filled before the Scan result is returned, setting setCaching to the number of rows to cache before returning the result. By default, the caching setting on the table is used. The goal is to balance IO and network load.
Timeout	The value in seconds until the timeout error is thrown, canceling the operation.
TypeDetectionScheme	Determines how to determine the data type of columns.
UserDefinedViews	A filepath pointing to the JSON configuration file containing your custom views.
UseSQLFiltering	Specifies whether to use the ScannerFilter when executing the SELECT Statement.

This section provides a complete list of the Authentication properties you can configure in the connection string for this provider.

---

Property	Description
AuthScheme	The scheme used for authentication. Accepted entries are None, Basic, and Negotiate (Kerberos). None is the default.
Server	The host name, IP address, or URL of the Apache HBase REST server.
Port	The port for the Apache HBase REST (Stargate) server.
User	The user who is authenticating to Apache HBase.
Password	The password used to authenticate to Apache HBase.

The scheme used for authentication. Accepted entries are None, Basic, and Negotiate (Kerberos). None is the default.

Remarks

This field is used to authenticate against the server. Use the following options to select your authentication scheme:

• None: No authentication is performed.
• Basic: Basic authentication is performed.
• Negotiate: If AuthScheme is set to Negotiate, the Sync App will Negotiate an authentication mechanism with the server. Set AuthScheme to Negotiate if you want to use Kerberos authentication.

The host name, IP address, or URL of the Apache HBase REST server.

Remarks

The host name, IP address, or URL of the Apache HBase REST (Stargate) server.

To use SSL, you can prefix the host name or IP address with 'https://'.

The port for the Apache HBase REST (Stargate) server.

Remarks

The port for the Apache HBase REST (Stargate) server.

The user who is authenticating to Apache HBase.

Remarks

The user who is authenticating to Apache HBase.

The password used to authenticate to Apache HBase.

Remarks

The password used to authenticate to Apache HBase.

This section provides a complete list of the Kerberos properties you can configure in the connection string for this provider.

---

Property	Description
KerberosKDC	The Kerberos Key Distribution Center (KDC) service used to authenticate the user.
KerberosRealm	The Kerberos Realm used to authenticate the user.
KerberosSPN	The service principal name (SPN) for the Kerberos Domain Controller.
KerberosKeytabFile	The Keytab file containing your pairs of Kerberos principals and encrypted keys.
KerberosServiceRealm	The Kerberos realm of the service.
KerberosServiceKDC	The Kerberos KDC of the service.
KerberosTicketCache	The full file path to an MIT Kerberos credential cache file.

The Kerberos Key Distribution Center (KDC) service used to authenticate the user.

Remarks

The Kerberos properties are used when using SPNEGO or Windows Authentication. The Sync App will request session tickets and temporary session keys from the Kerberos KDC service. The Kerberos KDC service is conventionally colocated with the domain controller.

If Kerberos KDC is not specified, the Sync App will attempt to detect these properties automatically from the following locations:

• KRB5 Config File (krb5.ini/krb5.conf): If the KRB5_CONFIG environment variable is set and the file exists, the Sync App will obtain the KDC from the specified file. Otherwise, it will attempt to read from the default MIT location based on the OS: C:\ProgramData\MIT\Kerberos5\krb5.ini (Windows) or /etc/krb5.conf (Linux).
• Domain Name and Host: If the Kerberos Realm and Kerberos KDC could not be inferred from another location, the Sync App will infer them from the configured domain name and host.

The Kerberos Realm used to authenticate the user.

Remarks

The Kerberos properties are used when using SPNEGO or Windows Authentication. The Kerberos Realm is used to authenticate the user with the Kerberos Key Distribution Service (KDC). The Kerberos Realm can be configured by an administrator to be any string, but conventionally it is based on the domain name.

If Kerberos Realm is not specified, the Sync App will attempt to detect these properties automatically from the following locations:

• KRB5 Config File (krb5.ini/krb5.conf): If the KRB5_CONFIG environment variable is set and the file exists, the Sync App will obtain the default realm from the specified file. Otherwise, it will attempt to read from the default MIT location based on the OS: C:\ProgramData\MIT\Kerberos5\krb5.ini (Windows) or /etc/krb5.conf (Linux)
• Domain Name and Host: If the Kerberos Realm and Kerberos KDC could not be inferred from another location, the Sync App will infer them from the user-configured domain name and host. This might work in some Windows environments.

The service principal name (SPN) for the Kerberos Domain Controller.

Remarks

If the SPN on the Kerberos Domain Controller is not the same as the URL that you are authenticating to, use this property to set the SPN.

The Keytab file containing your pairs of Kerberos principals and encrypted keys.

Remarks

The Keytab file containing your pairs of Kerberos principals and encrypted keys.

The Kerberos realm of the service.

Remarks

The KerberosServiceRealm is the specify the service Kerberos realm when using cross-realm Kerberos authentication.

In most cases, a single realm and KDC machine are used to perform the Kerberos authentication and this property is not required.

This property is available for complex setups where a different realm and KDC machine are used to obtain an authentication ticket (AS request) and a service ticket (TGS request).

The Kerberos KDC of the service.

Remarks

The KerberosServiceKDC is used to specify the service Kerberos KDC when using cross-realm Kerberos authentication.

In most cases, a single realm and KDC machine are used to perform the Kerberos authentication and this property is not required.

This property is available for complex setups where a different realm and KDC machine are used to obtain an authentication ticket (AS request) and a service ticket (TGS request).

The full file path to an MIT Kerberos credential cache file.

Remarks

This property can be set if you wish to use a credential cache file that was created using the MIT Kerberos Ticket Manager or kinit command.

This section provides a complete list of the SSL properties you can configure in the connection string for this provider.

---

Property	Description
SSLClientCert	The TLS/SSL client certificate store for SSL Client Authentication (2-way SSL).
SSLClientCertType	The type of key store containing the TLS/SSL client certificate.
SSLClientCertPassword	The password for the TLS/SSL client certificate.
SSLClientCertSubject	The subject of the TLS/SSL client certificate.
SSLServerCert	The certificate to be accepted from the server when connecting using TLS/SSL.

The TLS/SSL client certificate store for SSL Client Authentication (2-way SSL).

Remarks

The name of the certificate store for the client certificate.

The SSLClientCertType field specifies the type of the certificate store specified by SSLClientCert. If the store is password protected, specify the password in SSLClientCertPassword.

SSLClientCert is used in conjunction with the SSLClientCertSubject field in order to specify client certificates. If SSLClientCert has a value, and SSLClientCertSubject is set, a search for a certificate is initiated. See SSLClientCertSubject for more information.

Designations of certificate stores are platform-dependent.

The following are designations of the most common User and Machine certificate stores in Windows:

MY	A certificate store holding personal certificates with their associated private keys.
CA	Certifying authority certificates.
ROOT	Root certificates.
SPC	Software publisher certificates.

In Java, the certificate store normally is a file containing certificates and optional private keys.

When the certificate store type is PFXFile, this property must be set to the name of the file. When the type is PFXBlob, the property must be set to the binary contents of a PFX file (for example, PKCS12 certificate store).

The type of key store containing the TLS/SSL client certificate.

Remarks

This property can take one of the following values:

USER - default	For Windows, this specifies that the certificate store is a certificate store owned by the current user. Note that this store type is not available in Java.
MACHINE	For Windows, this specifies that the certificate store is a machine store. Note that this store type is not available in Java.
PFXFILE	The certificate store is the name of a PFX (PKCS12) file containing certificates.
PFXBLOB	The certificate store is a string (base-64-encoded) representing a certificate store in PFX (PKCS12) format.
JKSFILE	The certificate store is the name of a Java key store (JKS) file containing certificates. Note that this store type is only available in Java.
JKSBLOB	The certificate store is a string (base-64-encoded) representing a certificate store in JKS format. Note that this store type is only available in Java.
PEMKEY_FILE	The certificate store is the name of a PEM-encoded file that contains a private key and an optional certificate.
PEMKEY_BLOB	The certificate store is a string (base64-encoded) that contains a private key and an optional certificate.
PUBLIC_KEY_FILE	The certificate store is the name of a file that contains a PEM- or DER-encoded public key certificate.
PUBLIC_KEY_BLOB	The certificate store is a string (base-64-encoded) that contains a PEM- or DER-encoded public key certificate.
SSHPUBLIC_KEY_FILE	The certificate store is the name of a file that contains an SSH-style public key.
SSHPUBLIC_KEY_BLOB	The certificate store is a string (base-64-encoded) that contains an SSH-style public key.
P7BFILE	The certificate store is the name of a PKCS7 file containing certificates.
PPKFILE	The certificate store is the name of a file that contains a PuTTY Private Key (PPK).
XMLFILE	The certificate store is the name of a file that contains a certificate in XML format.
XMLBLOB	The certificate store is a string that contains a certificate in XML format.

The password for the TLS/SSL client certificate.

Remarks

If the certificate store is of a type that requires a password, this property is used to specify that password to open the certificate store.

The subject of the TLS/SSL client certificate.

Remarks

When loading a certificate the subject is used to locate the certificate in the store.

If an exact match is not found, the store is searched for subjects containing the value of the property. If a match is still not found, the property is set to an empty string, and no certificate is selected.

The special value "*" picks the first certificate in the certificate store.

The certificate subject is a comma separated list of distinguished name fields and values. For example, "CN=www.server.com, OU=test, C=US, [email protected]". The common fields and their meanings are shown below.

Field	Meaning
CN	Common Name. This is commonly a host name like www.server.com.
O	Organization
OU	Organizational Unit
L	Locality
S	State
C	Country
E	Email Address

If a field value contains a comma, it must be quoted.

The certificate to be accepted from the server when connecting using TLS/SSL.

Remarks

If using a TLS/SSL connection, this property can be used to specify the TLS/SSL certificate to be accepted from the server. Any other certificate that is not trusted by the machine is rejected.

This property can take the following forms:

Description	Example
A full PEM Certificate (example shortened for brevity)	-----BEGIN CERTIFICATE----- MIIChTCCAe4CAQAwDQYJKoZIhv......Qw== -----END CERTIFICATE-----
A path to a local file containing the certificate	C:\cert.cer
The public key (example shortened for brevity)	-----BEGIN RSA PUBLIC KEY----- MIGfMA0GCSq......AQAB -----END RSA PUBLIC KEY-----
The MD5 Thumbprint (hex values can also be either space or colon separated)	ecadbdda5a1529c58a1e9e09828d70e4
The SHA1 Thumbprint (hex values can also be either space or colon separated)	34a929226ae0819f2ec14b4a3d904f801cbb150d

If not specified, any certificate trusted by the machine is accepted.

Use '*' to signify to accept all certificates. Note that this is not recommended due to security concerns.

This section provides a complete list of the Firewall properties you can configure in the connection string for this provider.

---

Property	Description
FirewallType	The protocol used by a proxy-based firewall.
FirewallServer	The name or IP address of a proxy-based firewall.
FirewallPort	The TCP port for a proxy-based firewall.
FirewallUser	The user name to use to authenticate with a proxy-based firewall.
FirewallPassword	A password used to authenticate to a proxy-based firewall.

The protocol used by a proxy-based firewall.

Remarks

This property specifies the protocol that the Sync App will use to tunnel traffic through the FirewallServer proxy. Note that by default, the Sync App connects to the system proxy; to disable this behavior and connect to one of the following proxy types, set ProxyAutoDetect to false.

Type	Default Port	Description
TUNNEL	80	When this is set, the Sync App opens a connection to Apache HBase and traffic flows back and forth through the proxy.
SOCKS4	1080	When this is set, the Sync App sends data through the SOCKS 4 proxy specified by FirewallServer and FirewallPort and passes the FirewallUser value to the proxy, which determines if the connection request should be granted.
SOCKS5	1080	When this is set, the Sync App sends data through the SOCKS 5 proxy specified by FirewallServer and FirewallPort. If your proxy requires authentication, set FirewallUser and FirewallPassword to credentials the proxy recognizes.

To connect to HTTP proxies, use ProxyServer and ProxyPort. To authenticate to HTTP proxies, use ProxyAuthScheme, ProxyUser, and ProxyPassword.

The name or IP address of a proxy-based firewall.

Remarks

This property specifies the IP address, DNS name, or host name of a proxy allowing traversal of a firewall. The protocol is specified by FirewallType: Use FirewallServer with this property to connect through SOCKS or do tunneling. Use ProxyServer to connect to an HTTP proxy.

Note that the Sync App uses the system proxy by default. To use a different proxy, set ProxyAutoDetect to false.

The TCP port for a proxy-based firewall.

Remarks

This specifies the TCP port for a proxy allowing traversal of a firewall. Use FirewallServer to specify the name or IP address. Specify the protocol with FirewallType.

The user name to use to authenticate with a proxy-based firewall.

Remarks

The FirewallUser and FirewallPassword properties are used to authenticate against the proxy specified in FirewallServer and FirewallPort, following the authentication method specified in FirewallType.

A password used to authenticate to a proxy-based firewall.

Remarks

This property is passed to the proxy specified by FirewallServer and FirewallPort, following the authentication method specified by FirewallType.

This section provides a complete list of the Proxy properties you can configure in the connection string for this provider.

---

Property	Description
ProxyAutoDetect	This indicates whether to use the system proxy settings or not.
ProxyServer	The hostname or IP address of a proxy to route HTTP traffic through.
ProxyPort	The TCP port the ProxyServer proxy is running on.
ProxyAuthScheme	The authentication type to use to authenticate to the ProxyServer proxy.
ProxyUser	A user name to be used to authenticate to the ProxyServer proxy.
ProxyPassword	A password to be used to authenticate to the ProxyServer proxy.
ProxySSLType	The SSL type to use when connecting to the ProxyServer proxy.
ProxyExceptions	A semicolon separated list of destination hostnames or IPs that are exempt from connecting through the ProxyServer .

This indicates whether to use the system proxy settings or not.

Remarks

This takes precedence over other proxy settings, so you'll need to set ProxyAutoDetect to FALSE in order use custom proxy settings.

To connect to an HTTP proxy, see ProxyServer. For other proxies, such as SOCKS or tunneling, see FirewallType.

The hostname or IP address of a proxy to route HTTP traffic through.

Remarks

The hostname or IP address of a proxy to route HTTP traffic through. The Sync App can use the HTTP, Windows (NTLM), or Kerberos authentication types to authenticate to an HTTP proxy.

If you need to connect through a SOCKS proxy or tunnel the connection, see FirewallType.

By default, the Sync App uses the system proxy. If you need to use another proxy, set ProxyAutoDetect to false.

The TCP port the ProxyServer proxy is running on.

Remarks

The port the HTTP proxy is running on that you want to redirect HTTP traffic through. Specify the HTTP proxy in ProxyServer. For other proxy types, see FirewallType.

The authentication type to use to authenticate to the ProxyServer proxy.

Remarks

This value specifies the authentication type to use to authenticate to the HTTP proxy specified by ProxyServer and ProxyPort.

Note that the Sync App will use the system proxy settings by default, without further configuration needed; if you want to connect to another proxy, you will need to set ProxyAutoDetect to false, in addition to ProxyServer and ProxyPort. To authenticate, set ProxyAuthScheme and set ProxyUser and ProxyPassword, if needed.

The authentication type can be one of the following:

• BASIC: The Sync App performs HTTP BASIC authentication.
• DIGEST: The Sync App performs HTTP DIGEST authentication.
• NEGOTIATE: The Sync App retrieves an NTLM or Kerberos token based on the applicable protocol for authentication.
• PROPRIETARY: The Sync App does not generate an NTLM or Kerberos token. You must supply this token in the Authorization header of the HTTP request.

If you need to use another authentication type, such as SOCKS 5 authentication, see FirewallType.

A user name to be used to authenticate to the ProxyServer proxy.

Remarks

The ProxyUser and ProxyPassword options are used to connect and authenticate against the HTTP proxy specified in ProxyServer.

You can select one of the available authentication types in ProxyAuthScheme. If you are using HTTP authentication, set this to the user name of a user recognized by the HTTP proxy. If you are using Windows or Kerberos authentication, set this property to a user name in one of the following formats:

user@domain
domain\user

A password to be used to authenticate to the ProxyServer proxy.

Remarks

This property is used to authenticate to an HTTP proxy server that supports NTLM (Windows), Kerberos, or HTTP authentication. To specify the HTTP proxy, you can set ProxyServer and ProxyPort. To specify the authentication type, set ProxyAuthScheme.

If you are using HTTP authentication, additionally set ProxyUser and ProxyPassword to HTTP proxy.

If you are using NTLM authentication, set ProxyUser and ProxyPassword to your Windows password. You may also need these to complete Kerberos authentication.

For SOCKS 5 authentication or tunneling, see FirewallType.

By default, the Sync App uses the system proxy. If you want to connect to another proxy, set ProxyAutoDetect to false.

The SSL type to use when connecting to the ProxyServer proxy.

Remarks

This property determines when to use SSL for the connection to an HTTP proxy specified by ProxyServer. This value can be AUTO, ALWAYS, NEVER, or TUNNEL. The applicable values are the following:

AUTO	Default setting. If the URL is an HTTPS URL, the Sync App will use the TUNNEL option. If the URL is an HTTP URL, the component will use the NEVER option.
ALWAYS	The connection is always SSL enabled.
NEVER	The connection is not SSL enabled.
TUNNEL	The connection is through a tunneling proxy. The proxy server opens a connection to the remote host and traffic flows back and forth through the proxy.

A semicolon separated list of destination hostnames or IPs that are exempt from connecting through the ProxyServer .

Remarks

The ProxyServer is used for all addresses, except for addresses defined in this property. Use semicolons to separate entries.

Note that the Sync App uses the system proxy settings by default, without further configuration needed; if you want to explicitly configure proxy exceptions for this connection, you need to set ProxyAutoDetect = false, and configure ProxyServer and ProxyPort. To authenticate, set ProxyAuthScheme and set ProxyUser and ProxyPassword, if needed.

This section provides a complete list of the Logging properties you can configure in the connection string for this provider.

---

Property	Description
LogModules	Core modules to be included in the log file.

Core modules to be included in the log file.

Remarks

Only the modules specified (separated by ';') will be included in the log file. By default all modules are included.

See the Logging page for an overview.

This section provides a complete list of the Schema properties you can configure in the connection string for this provider.

---

Property	Description
Location	A path to the directory that contains the schema files defining tables, views, and stored procedures.
BrowsableSchemas	This property restricts the schemas reported to a subset of the available schemas. For example, BrowsableSchemas=SchemaA,SchemaB,SchemaC.
Tables	This property restricts the tables reported to a subset of the available tables. For example, Tables=TableA,TableB,TableC.
Views	Restricts the views reported to a subset of the available tables. For example, Views=ViewA,ViewB,ViewC.

A path to the directory that contains the schema files defining tables, views, and stored procedures.

Remarks

The path to a directory which contains the schema files for the Sync App (.rsd files for tables and views, .rsb files for stored procedures). The folder location can be a relative path from the location of the executable. The Location property is only needed if you want to customize definitions (for example, change a column name, ignore a column, and so on) or extend the data model with new tables, views, or stored procedures.

If left unspecified, the default location is "%APPDATA%\\CData\\ApacheHBase Data Provider\\Schema" with %APPDATA% being set to the user's configuration directory:

Platform	%APPDATA%
Windows	The value of the APPDATA environment variable
Linux	~/.config

This property restricts the schemas reported to a subset of the available schemas. For example, BrowsableSchemas=SchemaA,SchemaB,SchemaC.

Remarks

Listing the schemas from databases can be expensive. Providing a list of schemas in the connection string improves the performance.

This property restricts the tables reported to a subset of the available tables. For example, Tables=TableA,TableB,TableC.

Remarks

Listing the tables from some databases can be expensive. Providing a list of tables in the connection string improves the performance of the Sync App.

This property can also be used as an alternative to automatically listing views if you already know which ones you want to work with and there would otherwise be too many to work with.

Specify the tables you want in a comma-separated list. Each table should be a valid SQL identifier with any special characters escaped using square brackets, double-quotes or backticks. For example, Tables=TableA,[TableB/WithSlash],WithCatalog.WithSchema.`TableC With Space`.

Note that when connecting to a data source with multiple schemas or catalogs, you will need to provide the fully qualified name of the table in this property, as in the last example here, to avoid ambiguity between tables that exist in multiple catalogs or schemas.

Restricts the views reported to a subset of the available tables. For example, Views=ViewA,ViewB,ViewC.

Remarks

Listing the views from some databases can be expensive. Providing a list of views in the connection string improves the performance of the Sync App.

This property can also be used as an alternative to automatically listing views if you already know which ones you want to work with and there would otherwise be too many to work with.

Specify the views you want in a comma-separated list. Each view should be a valid SQL identifier with any special characters escaped using square brackets, double-quotes or backticks. For example, Views=ViewA,[ViewB/WithSlash],WithCatalog.WithSchema.`ViewC With Space`.

Note that when connecting to a data source with multiple schemas or catalogs, you will need to provide the fully qualified name of the table in this property, as in the last example here, to avoid ambiguity between tables that exist in multiple catalogs or schemas.

This section provides a complete list of the Miscellaneous properties you can configure in the connection string for this provider.

---

Property	Description
ColumnEncoding	The Encoding used for the column values. Accepted entries are None, UTF8, and BASE64. None is the default.
DatetimeFormat	The format used when inserting datetime values into the database.
ExposeColumnTimestamp	Specifies whether to expose the cell timestamp as a separate column when executing the SELECT Statement.
IncludeDisabledTables	Specifies whether to retrieve disabled tables.
MaxRows	Limits the number of rows returned when no aggregation or GROUP BY is used in the query. This takes precedence over LIMIT clauses.
Other	These hidden properties are used only in specific use cases.
Pagesize	The maximum number of results to return per page from Apache HBase.
PseudoColumns	This property indicates whether or not to include pseudo columns as columns to the table.
ResetTableMetadataOnDelete	Specifies whether to reset the cache table after executing the DELETE Statement.
RetrieveSelectedColumnsOnly	Specifies whether to retrieve selected columns only when executing a SELECT statement.
RowScanDepth	The maximum number of rows to scan to look for the columns available in a table.
ScannerCaching	Specify a scanner cache that will be filled before the Scan result is returned, setting setCaching to the number of rows to cache before returning the result. By default, the caching setting on the table is used. The goal is to balance IO and network load.
Timeout	The value in seconds until the timeout error is thrown, canceling the operation.
TypeDetectionScheme	Determines how to determine the data type of columns.
UserDefinedViews	A filepath pointing to the JSON configuration file containing your custom views.
UseSQLFiltering	Specifies whether to use the ScannerFilter when executing the SELECT Statement.

The Encoding used for the column values. Accepted entries are None, UTF8, and BASE64. None is the default.

Remarks

This field is used to encode the column value. Use the following options to specify your column encoding:

• None: Automatically get the the appropriate encoding via TypeDetectionScheme=RowScan.
• UTF8: Specify the encoding UTF8 for all columns.
• BASE64: Specify the encoding BASE64 for all columns, except the key column "RowKey".

The format used when inserting datetime values into the database.

Remarks

This can be used to automatically format any datetime values entering a database.

Specifies whether to expose the cell timestamp as a separate column when executing the SELECT Statement.

Remarks

The column name consists of the name of the cell and a fixed suffix

Specifies whether to retrieve disabled tables.

Remarks

Specifies whether to retrieve disabled tables.

Limits the number of rows returned when no aggregation or GROUP BY is used in the query. This takes precedence over LIMIT clauses.

Remarks

Limits the number of rows returned when no aggregation or GROUP BY is used in the query. This takes precedence over LIMIT clauses.

These hidden properties are used only in specific use cases.

Remarks

The properties listed below are available for specific use cases. Normal driver use cases and functionality should not require these properties.

Specify multiple properties in a semicolon-separated list.

Integration and Formatting

DefaultColumnSize	Sets the default length of string fields when the data source does not provide column length in the metadata. The default value is 2000.
ConvertDateTimeToGMT	Determines whether to convert date-time values to GMT, instead of the local time of the machine.
RecordToFile=filename	Records the underlying socket data transfer to the specified file.

The maximum number of results to return per page from Apache HBase.

Remarks

The Pagesize property affects the maximum number of results to return per page from Apache HBase. Setting a higher value may result in better performance at the cost of additional memory allocated per page consumed.

This property indicates whether or not to include pseudo columns as columns to the table.

Remarks

This setting is particularly helpful in Entity Framework, which does not allow you to set a value for a pseudo column unless it is a table column. The value of this connection setting is of the format "Table1=Column1, Table1=Column2, Table2=Column3". You can use the "*" character to include all tables and all columns; for example, "*=*".

Specifies whether to reset the cache table after executing the DELETE Statement.

Remarks

Specifies whether to reset the cache table after executing the DELETE Statement.

Specifies whether to retrieve selected columns only when executing a SELECT statement.

Remarks

By default, the Sync App will create a generic scanner to retrieve the results from HBase. This enables all values to be returned without HBase filtering out rows containing empty columns that were selected.

When set to 'True', the Sync App will only retrieve the selected columns from HBase. Note in this scenario, HBase will not return rows where a selected column is empty. In such a case, this can cause a different number of rows to be returned for various queries. This setting can improve performance but it should only be used when you know that there are no empty values for the selected columns or in the case that you don't want these rows to be returned.

The maximum number of rows to scan to look for the columns available in a table.

Remarks

The columns in a table must be determined by scanning table rows. This value determines the maximum number of rows that will be scanned.

Setting a high value may decrease performance. Setting a low value may prevent the data type from being determined properly, especially when there is null data.

Specify a scanner cache that will be filled before the Scan result is returned, setting setCaching to the number of rows to cache before returning the result. By default, the caching setting on the table is used. The goal is to balance IO and network load.

Remarks

It means there is no cache for the scanner if it is less than or equal to 0. A suitable cache value can improve query efficiency, but it can also introduce additional memory usage.

The value in seconds until the timeout error is thrown, canceling the operation.

Remarks

If Timeout = 0, operations do not time out. The operations run until they complete successfully or until they encounter an error condition.

If Timeout expires and the operation is not yet complete, the Sync App throws an exception.

Determines how to determine the data type of columns.

Remarks

None	Setting TypeDetectionScheme to None will return all columns as strings. The RowScanDepth determines the number of rows to be scanned to retrieve the column listing.
RowScan	Setting TypeDetectionScheme to RowScan will scan rows to heuristically determine the data type. The RowScanDepth determines the number of rows to be scanned to retrieve the column listing and column data type.

A filepath pointing to the JSON configuration file containing your custom views.

Remarks

User Defined Views are defined in a JSON-formatted configuration file called UserDefinedViews.json. The Sync App automatically detects the views specified in this file.

You can also have multiple view definitions and control them using the UserDefinedViews connection property. When you use this property, only the specified views are seen by the Sync App.

This User Defined View configuration file is formatted as follows:

• Each root element defines the name of a view.
• Each root element contains a child element, called query, which contains the custom SQL query for the view.

For example:

{
	"MyView": {
		"query": "SELECT * FROM Account WHERE MyColumn = 'value'"
	},
	"MyView2": {
		"query": "SELECT * FROM MyTable WHERE Id IN (1,2,3)"
	}
}

Use the UserDefinedViews connection property to specify the location of your JSON configuration file. For example:

"UserDefinedViews", C:\Users\yourusername\Desktop\tmp\UserDefinedViews.json

Note that the specified path is not embedded in quotation marks.

Specifies whether to use the ScannerFilter when executing the SELECT Statement.

Remarks

If UseSQLFiltering = false, only the client filter will be used.

protobuf

Copyright 2008 Google Inc. All rights reserved. Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met:

* Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer. * Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution. * Neither the name of Google Inc. nor the names of its contributors may be used to endorse or promote products derived from this software without specific prior written permission.

THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.

Code generated by the Protocol Buffer compiler is owned by the owner of the input file used when generating it. This code is not standalone and requires a support library to be linked with it. This support library is itself covered by the above license.