This section describes how to set up ODBC connectivity and configure DSNs on several Linux distributions: Debian-based systems, like Ubuntu, and Red Hat Linux platforms, like Red Hat Enterprise Linux (RHEL), CentOS, and Fedora.

Minimum Linux Versions

Here are the minimum supported versions for Red Hat-based and Debian-based systems:

OS	Min. Version
Ubuntu	11.04
Debian	7
RHEL	6.9
CentOS	6.9
Fedora	13
SUSE	12.1

Installing the Driver Dependencies

Run the following commands as root or with sudo to install the necessary dependencies:

• Debian/Ubuntu:
  

  apt-get install libc6 libstdc++6 zlib1g libgcc1

• RHEL/CentOS/Fedora:
  

  yum install glibc libstdc++ zlib libgcc

Here are the corresponding libraries required by the driver:

Debian/Ubuntu Package	RHEL/CentOS/Fedora Package	File
libc6	glibc	linux-vdso.1
libc6	glibc	libm.so.6
libc6	glibc	librt.so.1
libc6	glibc	libdl.so.2
libc6	glibc	libpthread.so.0
libc6	glibc	libc.so.6
libc6	glibc	ld-linux-x86-64.so.2
libstdc++6	libstdc++	libstdc++.so.6
zlib1g	zlib	libz.so.1
libgcc1	libgcc	libgcc_s.so.1

Installing the Driver

You can use standard package management systems to install the driver.

On Debian-based systems, like Ubuntu, run the following command with root or sudo:

dpkg -i /path/to/driver/setup/AmazonMarketplaceODBCDriverforUnix.deb 

On systems that support the RPM package format, run the following command with root or sudo:

rpm -ivh /path/to/driver/AmazonMarketplaceODBCDriverforUnix.rpm 

Licensing the Driver

Run the following commands to license the driver. To activate a trial, omit the <key> input.

cd /opt/cdata/cdata-odbc-driver-for-amazonmarketplace/bin/
sudo ./install-license.sh <key>

Connecting through the Driver Manager

The driver manager loads the driver and passes function calls from the application to the driver. You need to register the driver with the driver manager and you define DSNs in the driver manager's configuration files.

The driver installation registers the driver with the unixODBC driver manager and creates a system DSN. The unixODBC driver manager can be used from Python and from many other applications. Your application may embed another driver manager.

Creating the DSN

See Using unixODBC to install unixODBC and configure DSNs. See Using the DataDirect Driver Manager to create a DSN to connect to OBIEE, Informatica, and SAS.

Connecting to Amazon Marketplace

Amazon MWS API vs Selling Partner API

Amazon MWS (Marketplace Web Services) API is the older API for the Amazon Marketplace while Selling Partner (SP) API provides number of improvements over MWS API including JSON-based REST API design standards and OAuth 2.0. SP-API includes all functionality available in Amazon MWS API.

You may specify which API to connect to by setting Schema. Please be aware that each API has different available connection options as described below.

Connecting to Selling Partner API

When using the Amazon Selling Partner API to connect to the Amazon Marketplace, the following properties are required:

• Schema: Set this to SellingPartner.
• InitiateOAuth: Set this to GETANDREFRESH.
• Marketplace: Set this to the Marketplace region that you are registered to sell in.

Also, you can use the SellingPartner property to choose Seller or Vendor authentication.

Connecting to the MWS API

When using the Amazon MWS API to connect to the Amazon Marketplace, SellerId, Marketplace, Marketplace are required connection properties. Set Schema to Marketplace.

Configure Access to Amazon Marketplace

To connect to Amazon Marketplace first authorize CData developer. To do so follow the steps below:

• Using the CData MWS developer id: 195280669143.
• Go to the Manage your apps page in Seller Central and log into your Amazon seller account as the primary account holder.
• Click the Authorize new developer button and follows the authorization workflow using the developer id provided by the driver.

Or you can go to Amazon Marketplace CData Driver and click Authorize Now on the right panel.

Obtaining the MWS Auth Token

To obtain the MWS Auth Token, follow the steps below:

• Go to the Manage your apps page in Seller Central and log into your Amazon seller account as the primary account holder.
• Find the CData App.
• Under the MWS Auth Token Column click View.

Obtaining the Seller ID

To obtain the Seller ID follow the steps below:

• Login to your seller account.
• Select Settings, then Account Info on upper right of screen.
• Under Business Information select "Your Merchant Token".

Authenticate to Amazon Marketplace

Amazon Marketplace Accounts

Set the following connection properties to connect:

• SellerId: Set the Seller ID of Amazon marketplace web service settings.
• Marketplace: Set the Amazon marketplace location (for example, United States).
• Schema: Set Schema to Marketplace.

OAuth

Amazon Marketplace uses the OAuth authentication standard.

To authenticate using OAuth, you must either use the embedded application or create a new custom OAuth app. The embedded application supports desktop applications and headless machines. Web applications require that you create a custom OAuth application.

You can use a custom OAuth application to authenticate with a service account or a user account. See Creating a Custom OAuth App for more information.

Downloading Embedded Credentials

Because Amazon Marketplace requires that embedded credentials rotate every six months, CData credentials are hosted on oa.cdata.com. If you do not specify custom credentials, the embedded credentials are downloaded from our web service and saved in the location specified in OAuthClientLocation by default. NOTE:Make sure your firewall does not block oa.cdata.com.

Desktop Apps

You can use the embedded application or create a custom OAuth application. The key difference is that you must set additional connection properties if you use a custom application.

Get and Refresh the OAuth Access Token

After setting the following, you are ready to connect:

• Marketplace: Set this to the Marketplace region that you are registered to sell in.
• AppId: Set this to the application Id for the Selling Partner application you created.
• Schema: Set this to SellingPartner to connect to SP-API.
• AWSAccessKey: This is the Access Key tied to the AWS user that is associated with the OAuthClientId.
• AWSSecretKey: This is the Secret Key tied to the AWS user that is associated with the OAuthClientId.
• OAuthClientId (custom applications only): Set this to the client Id assigned when you registered your app.
• OAuthClientSecret (custom applications only): Set this to the client secret assigned when you registered your app.

When you connect the driver opens the OAuth endpoint in your default browser. Log in and grant permissions to the application.

Headless Machines

To configure the driver, use OAuth with a user account on a headless machine. You need to authenticate on another device that has an internet browser with a user account or serviced account.

1. Choose one of these two options:
   • Option 1: Obtain the OAuthVerifier value as described in "Obtain and Exchange a Verifier Code" below.
   • Option 2: Install the driver on another machine and transfer the OAuth authentication values after you authenticate through the usual browser-based flow, as described in "Transfer OAuth Settings" below.

2. Then configure the driver to automatically refresh the access token from the headless machine.

Option 1: Obtain and Exchange a Verifier Code

Follow these steps to authenticate from another machine and obtain the OAuthVerifier connection property:

1. Choose one of these options:
   • If you are using the Embedded OAuth Application, call the GetOAuthAuthorizationURL stored procedure. Open the URL returned by the stored procedure in a browser.
   • If you are using a custom OAuth application, set the following properties:
     • InitiateOAuth: Set this to OFF.
     • OAuthClientId (custom applications only): Set this to the Client Id in your application settings.
     • OAuthClientSecret (custom applications only): Set this to the Client Secret in your application settings.

       Then call the GetOAuthAuthorizationURL stored procedure with the appropriate CallbackURL. Open the URL returned by the stored procedure in a browser.

2. Log in and grant permissions to the driver. You are then redirected to the callback URL, which contains the verifier code as the value for 'spapi_oauth_code'. Save the value of the verifier code. You must set this in the OAuthVerifier connection property later.

Next, you need to exchange the OAuth verifier code for OAuth refresh and access tokens.

On the headless machine, set the following connection properties to obtain the OAuth authentication values:

• OAuthClientId (custom applications only): Set this to the consumer key in your application settings.
• OAuthClientSecret (custom applications only): Set this to the consumer secret in your application settings.
• OAuthVerifier: Set this to the verifier code.
• OAuthSettingsLocation: Set this to persist the encrypted OAuth authentication values to the specified location.
• InitiateOAuth: Set this to REFRESH.

After the OAuth settings file is generated, set the following properties to connect to data:

• OAuthClientId (custom applications only): Set this to the consumer key in your application settings.
• OAuthClientSecret (custom applications only): Set this to the consumer secret in your application settings.
• OAuthSettingsLocation: Set this to the location containing the encrypted OAuth authentication values. Make sure this location gives read and write permissions to the provider to enable the automatic refreshing of the access token.
• InitiateOAuth: Set this to REFRESH.
• Marketplace: Set this to the Marketplace region that you are registered to sell in.
• Schema: Set this to SellingPartner to connect to SP-API.
• AppId: Application Id for Selling Partner application you created.
• AWSAccessKey: This is the Access Key tied to the AWS user that is associated with the OAuthClientId.
• AWSSecretKey: This is the Secret Key tied to the AWS user that is associated with the OAuthClientId.

Option 2: Transfer OAuth Settings

Follow the steps below to install the driver on another machine, authenticate, and then transfer the resulting OAuth values.

On a second machine, install the driver and connect with the following properties set:

• OAuthSettingsLocation: Set this to a writable location.
• OAuthClientId (custom applications only): Set this to the client Id assigned when you registered your app.
• OAuthClientSecret (custom applications only): Set this to the client secret assigned when you registered your app.

Test the connection to authenticate. The resulting authentication values are encrypted and written to a file located in the path specified by OAuthSettingsLocation. After you have successfully tested the connection, copy the OAuth settings file to your headless machine. On the headless machine, set the following connection properties to connect to data:

• InitiateOAuth: Set this to REFRESH.
• OAuthClientId (custom applications only): Set this to the consumer key in your application settings.
• OAuthClientSecret (custom applications only): Set this to the consumer secret in your application settings.
• OAuthSettingsLocation: Set this to the location of your OAuth settings file. Make sure this location gives read and write permissions to the driver to enable the automatic refreshing of the access token.
• Marketplace: Set this to the Marketplace region that you are registered to sell in.
• Schema: Set this to SellingPartner to connect to SP-API.
• AppId: Application Id for Selling Partner application you created.
• AWSAccessKey: This is the Access Key tied to the AWS user that is associated with the OAuthClientId.
• AWSSecretKey: This is the Secret Key tied to the AWS user that is associated with the OAuthClientId.

Refreshing OAuth Values

The driver can refresh the temporary OAuth access tokens obtained during the browser-based OAuth authentication exchange. By default, the driver saves the encrypted tokens in the odbc.ini file corresponding to the DSN. Access to this odbc.ini file can be restricted in the case of System DSNs.

To enable the automatic token exchange, you can give the driver write access to the system odbc.ini. Or, you can set the OAuthSettingsLocation connection property to an alternate file path, to which the driver would have read and write access.

    OAuthSettingsLocation=/tmp/oauthsettings.txt
    

Installing Dependencies for OAuth Authentication

The OAuth authentication standard requires the authenticating user to interact with Amazon Marketplace, using a web-browser. If the first OAuth interaction is to be done on the same machine the driver is installed on, for example, a desktop application, the driver needs access to the xdg-open program, which opens the default browser.

To satisfy this dependency, install the corresponding package with your package manager:

Debian/Ubuntu Package	RHEL/CentOS/Fedora Package	File
xdg-utils	xdg-utils	xdg-open

Set the Driver Encoding

The ODBC drivers need to specify which encoding to use with the ODBC Driver Manager. By default, the CData ODBC Drivers for Unix are configured to use UTF-16 which is compatible with unixODBC, but other Driver Managers may require alternative encoding.

Alternatively, if you are using the ODBC driver from an application that uses the ANSI ODBC API it may be necessary to set the ANSI code page. For example, to import Japanese characters in an ANSI application, you can specify the code page in the config file '/opt/cdata/cdata-odbc-driver-for-amazonmarketplace/lib/cdata.odbc.amazonmarketplace.ini':

[Driver]
AnsiCodePage = 932