This page provides a guide to Establishing a Connection to SAP Cloud for Customer in CData Cloud, as well as information on the available resources, and a reference to the available connection properties.

Connecting to SAP Cloud for Customer

Establishing a Connection shows how to authenticate to SAP Cloud for Customer and configure any necessary connection properties to create a database in CData Cloud

Accessing Data from CData Cloud Services

Accessing data from SAP Cloud for Customer through the available standard services and CData Cloud administration is documented in further details in the CData Cloud Documentation.

Connect to SAP Cloud for Customer by selecting the corresponding icon in the Database tab. Required properties are listed under Settings. The Advanced tab lists connection properties that are not typically required.

Connecting to SAP Cloud for Customer

To identify your SAP Cloud for Customer instance, set the following:

• Tenant: The full domain name of your SAP Cloud for Customer tenant.
• URL: The URL corresponding to your SAP Cloud for Customer instance. You must specify this if it differs from the default service of "c4codata". Otherwise, omit this connection property.

Authenticating to SAP Cloud for Customer

User Credentials

Set the AuthScheme to Basic and specify the following:

• User: Your SAP Cloud for Customer username.
• Password: Your SAP Cloud for Customer password.

Azure AD

Set the AuthScheme to AzureAD.

Configuring a Custom Extension

This configuration requires a custom extension to SAP Hybris. This extension can be created using the yempty tool.

Connection Configuration

After configuring your custom extension, set the following to authenticate:

• OAuthClientId: The application Id of the connector application, found in the Overview section of the app registration.
• OAuthClientSecret: The client secret value of the connector application. Azure AD displays this when you create a new client secret.
• CallbackURL: The redirect URI of the connector application. For example: https://localhost:33333
• SSOProperties: Set the following additional properties, each separated by a commma, in the format A=B;C=D; etc.
  • Resource: The URL of your environment.
  • AzureTentant: The Id of the Azure AD tenant where the applications are registered.

Customizing the SSL Configuration

By default, the Cloud attempts to negotiate TLS with the server. The server certificate is validated against the default system trusted certificate store. You can override how the certificate gets validated using the SSLServerCert connection property.

To specify another certificate, see the SSLServerCert connection property.

Connecting Through a Firewall or Proxy

HTTP Proxies

To authenticate to an HTTP proxy, set the following:

• ProxyServer: the hostname or IP address of the proxy server that you want to route HTTP traffic through.
• ProxyPort: the TCP port that the proxy server is running on.
• ProxyAuthScheme: the authentication method the Cloud uses when authenticating to the proxy server.
• ProxyUser: the username of a user account registered with the proxy server.
• ProxyPassword: the password associated with the ProxyUser.

Other Proxies

Set the following properties:

• To use a proxy-based firewall, set FirewallType, FirewallServer, and FirewallPort.
• To tunnel the connection, set FirewallType to TUNNEL.
• To authenticate, specify FirewallUser and FirewallPassword.
• To authenticate to a SOCKS proxy, additionally set FirewallType to SOCKS5.

The CData Cloud models SAP Cloud for Customer entities in relational Tables, Views, and Stored Procedures. The table definitions are dynamically obtained from the OData service you connect to. Any changes in the metadata, such as added or removed columns or changes in data type, can be loaded by reconnecting.

Tables

The Cloud models the writable entity sets described in the service metadata document as bidirectional Tables.

Views

Read-only entity sets are modeled as Views. Additionally, some SAP Cloud for Customer entities can only be accessed through Navigation Properties. The Cloud models navigation properties as separate Views.

The Cloud exposes tables for every entity set and singleton defined on the OData service document. Entities on these tables may be inserted, updated, or deleted using standard SQL insert, update, or delete statements.

Executing Deep Inserts with SQL

The Cloud supports OData deep inserts, in which you simultaneously create a base entity and link it to related entities, by specifying navigation properties. To specify Navigation Properties for an entity, you create a temporary table for the navigation property and then reference the temporary table in the insert to the base table. Reference the temporary table in the appropriate navigation property column on the base table. Each navigation property column is prefixed with the word "Linked".

Note that you must define the temporary tables and insert to the base table within the same connection.

Example: Deep Inserts

For example, consider the AccountCollection and LeadBusinessDocumentReferenceCollection tables. When creating a new Account, you may also want to specify an Account Address. When creating a LeadBusinessDocumentReference, you need to specify an existing document. For each of these, you need to specify the following navigation properties.

Creating Temporary Tables

Insert the related entities into temporary tables that correspond to each navigation property. You can specify an existing entity's primary key or you can insert a new entity.

• Account Address: The following statement creates two new Account Addresses:
  

  INSERT INTO AccountAddressCollection#TEMP (CountryCode, City, Street) VALUES ('USA', 'New York', '123 Fake Street')
  
  INSERT INTO AccountAddressCollection#TEMP (CountryCode, City, Street) VALUES ('USA', 'San Franscisco', '456 CA Street')

• Opportunity: The following statement specifies an existing Opportunity:
  

  INSERT INTO OpportunityCollection#TEMP (ObjectID) VALUES ('123')

The Cloud will assume that the Opportunity already exists and will only link to the existing references since only the primary key was specified. When more than just the primary key is defined, such as the example for Account Address, the CData Cloud will attempt to create new entries - triggering the deep insert.

Inserting the Entity

In the INSERT statement for the base entity, reference the temporary tables in the LinkedOpportunity or LinkedAccountAddress columns:

INSERT INTO AccountCollection (AccountID, AccountName, LinkedAccountAddress) VALUES ('123', 'My New Account', 'AccountAddressCollection#TEMP')

INSERT INTO LeadBusinessDocumentReferenceCollection (ParentObjectID, LinkedOpportunity) VALUES ('5555', 'OpportunityCollection#TEMP')

Modeling Navigation Properties

The Cloud models Navigation Properties as separate views. The views are named in the format ParentTable_NavigationProperty.

Querying Navigation Properties

For an example of working with a navigation property as a view, see AccountCollection_AccountAddress. In SAP Cloud for Customer, the AccountCollection entity set has an AccountAddress navigation property. The CData Cloud will display a view called AccountCollection_AccountAddress. Retrieving data from AccountCollection_AccountAddress will display all of the AccountAddresses associated with a given Account. The AccountCollection_AccountAddress view has a primary key made up of the Id of the parent entity and the Id of the related entity.

In OData, a navigation property is a property on an entity that is itself either a single entity or list of entities.

A single-entity navigation property signifies a one-to-one relationship; for example, SAP Cloud for Customer has only one Account per AccountTeam. In SAP Cloud for Customer, Account is a navigation property on Account Team.

An entity set navigation property signifies a one-to-many relationship; for example, in SAP Cloud for Customer many AccountTeams can belong in the same Account. In SAP Cloud for Customer, AccountTeam is a navigation property on Accounts, which contain multiple AccountTeams.

Working with Navigation Properties Relationally

Navigation properties in OData link related entities. Similarly, in a relational database, a foreign key serves to link tables. While OData can support foreign key references between related entities, SAP Cloud for Customer does not use them. Instead, relationships between entities can only be determined using the navigation properties.

Select

Navigation properties will be displayed as views. They can be selected directly from just like any normal table. See Views for more information on querying navigation properties.

Insert

The Cloud supports deep inserts. See Tables for more information on specifying navigation properties when you create an entity.

You can query the system tables described in this section to access schema information, information on data source functionality, and batch operation statistics.

Schema Tables

The following tables return database metadata for SAP Cloud for Customer:

• sys_catalogs: Lists the available databases.
• sys_schemas: Lists the available schemas.
• sys_tables: Lists the available tables and views.
• sys_tablecolumns: Describes the columns of the available tables and views.
• sys_procedures: Describes the available stored procedures.
• sys_procedureparameters: Describes stored procedure parameters.
• sys_keycolumns: Describes the primary and foreign keys.
• sys_indexes: Describes the available indexes.

Data Source Tables

The following tables return information about how to connect to and query the data source:

• sys_connection_props: Returns information on the available connection properties.
• sys_sqlinfo: Describes the SELECT queries that the Cloud can offload to the data source.

Query Information Tables

The following table returns query statistics for data modification queries:

• sys_identity: Returns information about batch operations or single updates.

Lists the available databases.

The following query retrieves all databases determined by the connection string:

SELECT * FROM sys_catalogs

Columns

Name	Type	Description
CatalogName	String	The database name.

Lists the available schemas.

The following query retrieves all available schemas:

          SELECT * FROM sys_schemas
          

Columns

Name	Type	Description
CatalogName	String	The database name.
SchemaName	String	The schema name.

Lists the available tables.

The following query retrieves the available tables and views:

          SELECT * FROM sys_tables
          

Columns

Name	Type	Description
CatalogName	String	The database containing the table or view.
SchemaName	String	The schema containing the table or view.
TableName	String	The name of the table or view.
TableType	String	The table type (table or view).
Description	String	A description of the table or view.
IsUpdateable	Boolean	Whether the table can be updated.

Describes the columns of the available tables and views.

The following query returns the columns and data types for the AccountCollection table:

SELECT ColumnName, DataTypeName FROM sys_tablecolumns WHERE TableName='AccountCollection' 

Columns

Name	Type	Description
CatalogName	String	The name of the database containing the table or view.
SchemaName	String	The schema containing the table or view.
TableName	String	The name of the table or view containing the column.
ColumnName	String	The column name.
DataTypeName	String	The data type name.
DataType	Int32	An integer indicating the data type. This value is determined at run time based on the environment.
Length	Int32	The storage size of the column.
DisplaySize	Int32	The designated column's normal maximum width in characters.
NumericPrecision	Int32	The maximum number of digits in numeric data. The column length in characters for character and date-time data.
NumericScale	Int32	The column scale or number of digits to the right of the decimal point.
IsNullable	Boolean	Whether the column can contain null.
Description	String	A brief description of the column.
Ordinal	Int32	The sequence number of the column.
IsAutoIncrement	String	Whether the column value is assigned in fixed increments.
IsGeneratedColumn	String	Whether the column is generated.
IsHidden	Boolean	Whether the column is hidden.
IsArray	Boolean	Whether the column is an array.
IsReadOnly	Boolean	Whether the column is read-only.
IsKey	Boolean	Indicates whether a field returned from sys_tablecolumns is the primary key of the table.
ColumnType	String	The role or classification of the column in the schema. Possible values include SYSTEM, LINKEDCOLUMN, NAVIGATIONKEY, REFERENCECOLUMN, and NAVIGATIONPARENTCOLUMN.

Lists the available stored procedures.

The following query retrieves the available stored procedures:

          SELECT * FROM sys_procedures
          

Columns

Name	Type	Description
CatalogName	String	The database containing the stored procedure.
SchemaName	String	The schema containing the stored procedure.
ProcedureName	String	The name of the stored procedure.
Description	String	A description of the stored procedure.
ProcedureType	String	The type of the procedure, such as PROCEDURE or FUNCTION.

Describes stored procedure parameters.

The following query returns information about all of the input parameters for the SelectEntries stored procedure:

SELECT * FROM sys_procedureparameters WHERE ProcedureName = 'SelectEntries' AND Direction = 1 OR Direction = 2

To include result set columns in addition to the parameters, set the IncludeResultColumns pseudo column to True:

SELECT * FROM sys_procedureparameters WHERE ProcedureName = 'SelectEntries' AND IncludeResultColumns='True'

Columns

Name	Type	Description
CatalogName	String	The name of the database containing the stored procedure.
SchemaName	String	The name of the schema containing the stored procedure.
ProcedureName	String	The name of the stored procedure containing the parameter.
ColumnName	String	The name of the stored procedure parameter.
Direction	Int32	An integer corresponding to the type of the parameter: input (1), input/output (2), or output(4). input/output type parameters can be both input and output parameters.
DataType	Int32	An integer indicating the data type. This value is determined at run time based on the environment.
DataTypeName	String	The name of the data type.
NumericPrecision	Int32	The maximum precision for numeric data. The column length in characters for character and date-time data.
Length	Int32	The number of characters allowed for character data. The number of digits allowed for numeric data.
NumericScale	Int32	The number of digits to the right of the decimal point in numeric data.
IsNullable	Boolean	Whether the parameter can contain null.
IsRequired	Boolean	Whether the parameter is required for execution of the procedure.
IsArray	Boolean	Whether the parameter is an array.
Description	String	The description of the parameter.
Ordinal	Int32	The index of the parameter.
Values	String	The values you can set in this parameter are limited to those shown in this column. Possible values are comma-separated.
SupportsStreams	Boolean	Whether the parameter represents a file that you can pass as either a file path or a stream.
IsPath	Boolean	Whether the parameter is a target path for a schema creation operation.
Default	String	The value used for this parameter when no value is specified.
SpecificName	String	A label that, when multiple stored procedures have the same name, uniquely identifies each identically-named stored procedure. If there's only one procedure with a given name, its name is simply reflected here.
IsCDataProvided	Boolean	Whether the procedure is added/implemented by CData, as opposed to being a native SAP Cloud for Customer procedure.

Pseudo-Columns

Name	Type	Description
IncludeResultColumns	Boolean	Whether the output should include columns from the result set in addition to parameters. Defaults to False.

Describes the primary and foreign keys.

The following query retrieves the primary key for the AccountCollection table:

         SELECT * FROM sys_keycolumns WHERE IsKey='True' AND TableName='AccountCollection' 
          

Columns

Name	Type	Description
CatalogName	String	The name of the database containing the key.
SchemaName	String	The name of the schema containing the key.
TableName	String	The name of the table containing the key.
ColumnName	String	The name of the key column.
IsKey	Boolean	Whether the column is a primary key in the table referenced in the TableName field.
IsForeignKey	Boolean	Whether the column is a foreign key referenced in the TableName field.
PrimaryKeyName	String	The name of the primary key.
ForeignKeyName	String	The name of the foreign key.
ReferencedCatalogName	String	The database containing the primary key.
ReferencedSchemaName	String	The schema containing the primary key.
ReferencedTableName	String	The table containing the primary key.
ReferencedColumnName	String	The column name of the primary key.

Describes the foreign keys.

The following query retrieves all foreign keys which refer to other tables:

         SELECT * FROM sys_foreignkeys WHERE ForeignKeyType = 'FOREIGNKEY_TYPE_IMPORT'
          

Columns

Name	Type	Description
CatalogName	String	The name of the database containing the key.
SchemaName	String	The name of the schema containing the key.
TableName	String	The name of the table containing the key.
ColumnName	String	The name of the key column.
PrimaryKeyName	String	The name of the primary key.
ForeignKeyName	String	The name of the foreign key.
ReferencedCatalogName	String	The database containing the primary key.
ReferencedSchemaName	String	The schema containing the primary key.
ReferencedTableName	String	The table containing the primary key.
ReferencedColumnName	String	The column name of the primary key.
ForeignKeyType	String	Designates whether the foreign key is an import (points to other tables) or export (referenced from other tables) key.

Describes the primary keys.

The following query retrieves the primary keys from all tables and views:

         SELECT * FROM sys_primarykeys
          

Columns

Name	Type	Description
CatalogName	String	The name of the database containing the key.
SchemaName	String	The name of the schema containing the key.
TableName	String	The name of the table containing the key.
ColumnName	String	The name of the key column.
KeySeq	String	The sequence number of the primary key.
KeyName	String	The name of the primary key.

Describes the available indexes. By filtering on indexes, you can write more selective queries with faster query response times.

The following query retrieves all indexes that are not primary keys:

          SELECT * FROM sys_indexes WHERE IsPrimary='false'
          

Columns

Name	Type	Description
CatalogName	String	The name of the database containing the index.
SchemaName	String	The name of the schema containing the index.
TableName	String	The name of the table containing the index.
IndexName	String	The index name.
ColumnName	String	The name of the column associated with the index.
IsUnique	Boolean	True if the index is unique. False otherwise.
IsPrimary	Boolean	True if the index is a primary key. False otherwise.
Type	Int16	An integer value corresponding to the index type: statistic (0), clustered (1), hashed (2), or other (3).
SortOrder	String	The sort order: A for ascending or D for descending.
OrdinalPosition	Int16	The sequence number of the column in the index.

Returns information on the available connection properties and those set in the connection string.

The following query retrieves all connection properties that have been set in the connection string or set through a default value:

SELECT * FROM sys_connection_props WHERE Value <> ''

Columns

Name	Type	Description
Name	String	The name of the connection property.
ShortDescription	String	A brief description.
Type	String	The data type of the connection property.
Default	String	The default value if one is not explicitly set.
Values	String	A comma-separated list of possible values. A validation error is thrown if another value is specified.
Value	String	The value you set or a preconfigured default.
Required	Boolean	Whether the property is required to connect.
Category	String	The category of the connection property.
IsSessionProperty	String	Whether the property is a session property, used to save information about the current connection.
Sensitivity	String	The sensitivity level of the property. This informs whether the property is obfuscated in logging and authentication forms.
PropertyName	String	A camel-cased truncated form of the connection property name.
Ordinal	Int32	The index of the parameter.
CatOrdinal	Int32	The index of the parameter category.
Hierarchy	String	Shows dependent properties associated that need to be set alongside this one.
Visible	Boolean	Informs whether the property is visible in the connection UI.
ETC	String	Various miscellaneous information about the property.

Describes the SELECT query processing that the Cloud can offload to the data source.

See SQL Compliance for SQL syntax details.

Discovering the Data Source's SELECT Capabilities

Below is an example data set of SQL capabilities. Some aspects of SELECT functionality are returned in a comma-separated list if supported; otherwise, the column contains NO.

Name	Description	Possible Values
AGGREGATE_FUNCTIONS	Supported aggregation functions.	AVG, COUNT, MAX, MIN, SUM, DISTINCT
COUNT	Whether COUNT function is supported.	YES, NO
IDENTIFIER_QUOTE_OPEN_CHAR	The opening character used to escape an identifier.	[
IDENTIFIER_QUOTE_CLOSE_CHAR	The closing character used to escape an identifier.	]
SUPPORTED_OPERATORS	A list of supported SQL operators.	=, >, <, >=, <=, <>, !=, LIKE, NOT LIKE, IN, NOT IN, IS NULL, IS NOT NULL, AND, OR
GROUP_BY	Whether GROUP BY is supported, and, if so, the degree of support.	NO, NO_RELATION, EQUALS_SELECT, SQL_GB_COLLATE
OJ_CAPABILITIES	The supported varieties of outer joins supported.	NO, LEFT, RIGHT, FULL, INNER, NOT_ORDERED, ALL_COMPARISON_OPS
OUTER_JOINS	Whether outer joins are supported.	YES, NO
SUBQUERIES	Whether subqueries are supported, and, if so, the degree of support.	NO, COMPARISON, EXISTS, IN, CORRELATED_SUBQUERIES, QUANTIFIED
STRING_FUNCTIONS	Supported string functions.	LENGTH, CHAR, LOCATE, REPLACE, SUBSTRING, RTRIM, LTRIM, RIGHT, LEFT, UCASE, SPACE, SOUNDEX, LCASE, CONCAT, ASCII, REPEAT, OCTET, BIT, POSITION, INSERT, TRIM, UPPER, REGEXP, LOWER, DIFFERENCE, CHARACTER, SUBSTR, STR, REVERSE, PLAN, UUIDTOSTR, TRANSLATE, TRAILING, TO, STUFF, STRTOUUID, STRING, SPLIT, SORTKEY, SIMILAR, REPLICATE, PATINDEX, LPAD, LEN, LEADING, KEY, INSTR, INSERTSTR, HTML, GRAPHICAL, CONVERT, COLLATION, CHARINDEX, BYTE
NUMERIC_FUNCTIONS	Supported numeric functions.	ABS, ACOS, ASIN, ATAN, ATAN2, CEILING, COS, COT, EXP, FLOOR, LOG, MOD, SIGN, SIN, SQRT, TAN, PI, RAND, DEGREES, LOG10, POWER, RADIANS, ROUND, TRUNCATE
TIMEDATE_FUNCTIONS	Supported date/time functions.	NOW, CURDATE, DAYOFMONTH, DAYOFWEEK, DAYOFYEAR, MONTH, QUARTER, WEEK, YEAR, CURTIME, HOUR, MINUTE, SECOND, TIMESTAMPADD, TIMESTAMPDIFF, DAYNAME, MONTHNAME, CURRENT_DATE, CURRENT_TIME, CURRENT_TIMESTAMP, EXTRACT
REPLICATION_SKIP_TABLES	Indicates tables skipped during replication.
REPLICATION_TIMECHECK_COLUMNS	A string array containing a list of columns which will be used to check for (in the given order) to use as a modified column during replication.
IDENTIFIER_PATTERN	String value indicating what string is valid for an identifier.
SUPPORT_TRANSACTION	Indicates if the provider supports transactions such as commit and rollback.	YES, NO
DIALECT	Indicates the SQL dialect to use.
KEY_PROPERTIES	Indicates the properties which identify the uniform database.
SUPPORTS_MULTIPLE_SCHEMAS	Indicates if multiple schemas may exist for the provider.	YES, NO
SUPPORTS_MULTIPLE_CATALOGS	Indicates if multiple catalogs may exist for the provider.	YES, NO
DATASYNCVERSION	The CData Data Sync version needed to access this driver.	Standard, Starter, Professional, Enterprise
DATASYNCCATEGORY	The CData Data Sync category of this driver.	Source, Destination, Cloud Destination
SUPPORTSENHANCEDSQL	Whether enhanced SQL functionality beyond what is offered by the API is supported.	TRUE, FALSE
SUPPORTS_BATCH_OPERATIONS	Whether batch operations are supported.	YES, NO
SQL_CAP	All supported SQL capabilities for this driver.	SELECT, INSERT, DELETE, UPDATE, TRANSACTIONS, ORDERBY, OAUTH, ASSIGNEDID, LIMIT, LIKE, BULKINSERT, COUNT, BULKDELETE, BULKUPDATE, GROUPBY, HAVING, AGGS, OFFSET, REPLICATE, COUNTDISTINCT, JOINS, DROP, CREATE, DISTINCT, INNERJOINS, SUBQUERIES, ALTER, MULTIPLESCHEMAS, GROUPBYNORELATION, OUTERJOINS, UNIONALL, UNION, UPSERT, GETDELETED, CROSSJOINS, GROUPBYCOLLATE, MULTIPLECATS, FULLOUTERJOIN, MERGE, JSONEXTRACT, BULKUPSERT, SUM, SUBQUERIESFULL, MIN, MAX, JOINSFULL, XMLEXTRACT, AVG, MULTISTATEMENTS, FOREIGNKEYS, CASE, LEFTJOINS, COMMAJOINS, WITH, LITERALS, RENAME, NESTEDTABLES, EXECUTE, BATCH, BASIC, INDEX
PREFERRED_CACHE_OPTIONS	A string value specifies the preferred cacheOptions.
ENABLE_EF_ADVANCED_QUERY	Indicates if the driver directly supports advanced queries coming from Entity Framework. If not, queries will be handled client side.	YES, NO
PSEUDO_COLUMNS	A string array indicating the available pseudo columns.
MERGE_ALWAYS	If the value is true, The Merge Mode is forcibly executed in Data Sync.	TRUE, FALSE
REPLICATION_MIN_DATE_QUERY	A select query to return the replicate start datetime.
REPLICATION_MIN_FUNCTION	Allows a provider to specify the formula name to use for executing a server side min.
REPLICATION_START_DATE	Allows a provider to specify a replicate startdate.
REPLICATION_MAX_DATE_QUERY	A select query to return the replicate end datetime.
REPLICATION_MAX_FUNCTION	Allows a provider to specify the formula name to use for executing a server side max.
IGNORE_INTERVALS_ON_INITIAL_REPLICATE	A list of tables which will skip dividing the replicate into chunks on the initial replicate.
CHECKCACHE_USE_PARENTID	Indicates whether the CheckCache statement should be done against the parent key column.	TRUE, FALSE
CREATE_SCHEMA_PROCEDURES	Indicates stored procedures that can be used for generating schema files.

The following query retrieves the operators that can be used in the WHERE clause:

SELECT * FROM sys_sqlinfo WHERE Name = 'SUPPORTED_OPERATORS'

Note that individual tables may have different limitations or requirements on the WHERE clause; refer to the Data Model section for more information.

Columns

Name	Type	Description
NAME	String	A component of SQL syntax, or a capability that can be processed on the server.
VALUE	String	Detail on the supported SQL or SQL syntax.

Returns information about attempted modifications.

The following query retrieves the Ids of the modified rows in a batch operation:

         SELECT * FROM sys_identity
          

Columns

Name	Type	Description
Id	String	The database-generated Id returned from a data modification operation.
Batch	String	An identifier for the batch. 1 for a single operation.
Operation	String	The result of the operation in the batch: INSERTED, UPDATED, or DELETED.
Message	String	SUCCESS or an error message if the update in the batch failed.

Describes the available system information.

The following query retrieves all columns:

SELECT * FROM sys_information

Columns

Name	Type	Description
Product	String	The name of the product.
Version	String	The version number of the product.
Datasource	String	The name of the datasource the product connects to.
NodeId	String	The unique identifier of the machine where the product is installed.
HelpURL	String	The URL to the product's help documentation.
License	String	The license information for the product. (If this information is not available, the field may be left blank or marked as 'N/A'.)
Location	String	The file path location where the product's library is stored.
Environment	String	The version of the environment or rumtine the product is currently running under.
DataSyncVersion	String	The tier of CData Sync required to use this connector.
DataSyncCategory	String	The category of CData Sync functionality (e.g., Source, Destination).

Data Type Mappings

The Cloud maps types from the data source to the corresponding data type available in the schema. The table below documents these mappings.

SAP Cloud for Customer (OData V2)	CData Schema
Edm.Binary	binary
Edm.Boolean	bool
Edm.DateTime	datetime
Edm.Decimal	decimal
Edm.Double	double
Edm.Guid	guid
Edm.Int32	int
Edm.String	string
Edm.TimeOfDay	time

The connection string properties are the various options that can be used to establish a connection. This section provides a complete list of the options you can configure in the connection string for this provider. Click the links for further details.

For more information on establishing a connection, see Establishing a Connection.

Authentication

---

Property	Description
AuthScheme	The type of authentication to use when connecting to SAP Cloud for Customer.
URL	The SAP Cloud for Customer URL to connect to. Use this to override the default service of c4codata.
Tenant	The SAP Cloud for Customer tenant a connection should be established to.
UseCustomService	Indicates if the custom SAP Cloud for Customer OData service should be used.
User	Specifies the authenticating user's user ID.
Password	Specifies the authenticating user's password.

SSO

---

Property	Description
SSOProperties	Additional properties required to connect to the identity provider, formatted as a semicolon-separated list.

OAuth

---

Property	Description
OAuthClientId	Specifies the client ID (also known as the consumer key) assigned to your custom OAuth application. This ID is required to identify the application to the OAuth authorization server during authentication.
OAuthClientSecret	Specifies the client secret assigned to your custom OAuth application. This confidential value is used to authenticate the application to the OAuth authorization server. (Custom OAuth applications only.).

SSL

---

Property	Description
SSLServerCert	Specifies the certificate to be accepted from the server when connecting using TLS/SSL.

Logging

---

Property	Description
Verbosity	Specifies the verbosity level of the log file, which controls the amount of detail logged. Supported values range from 1 to 5.

Schema

---

Property	Description
BrowsableSchemas	Optional setting that restricts the schemas reported to a subset of all available schemas. For example, BrowsableSchemas=SchemaA,SchemaB,SchemaC .

Miscellaneous

---

Property	Description
MaxRows	Specifies the maximum number of rows returned for queries that do not include either aggregation or GROUP BY.
Pagesize	Specifies the maximum number of records per page the provider returns when requesting data from SAP Cloud for Customer.
PseudoColumns	Specifies the pseudocolumns to expose as table columns, expressed as a string in the format 'TableName=ColumnName;TableName=ColumnName'.
Timeout	Specifies the maximum time, in seconds, that the provider waits for a server response before throwing a timeout error.
UseClientSidePaging	Whether or not the CData ADO.NET Provider for SAP Cloud for Customer should use client side paging.

This section provides a complete list of the Authentication properties you can configure in the connection string for this provider.

---

Property	Description
AuthScheme	The type of authentication to use when connecting to SAP Cloud for Customer.
URL	The SAP Cloud for Customer URL to connect to. Use this to override the default service of c4codata.
Tenant	The SAP Cloud for Customer tenant a connection should be established to.
UseCustomService	Indicates if the custom SAP Cloud for Customer OData service should be used.
User	Specifies the authenticating user's user ID.
Password	Specifies the authenticating user's password.

The type of authentication to use when connecting to SAP Cloud for Customer.

Possible Values

Basic, AzureAD

Data Type

string

Default Value

"Basic"

Remarks

• Basic: Set this to perform basic authentication.
• AzureAD: Set this to use Azure AD SSO authentication.

The SAP Cloud for Customer URL to connect to. Use this to override the default service of c4codata.

Data Type

string

Default Value

""

Remarks

By default, the CData Cloud connects to https://tenantname.crm.ondemand.com/sap/byd/odata/v1/c4codata/. This is the most comprehensive endpoint, but may not include some data types that can be found on other services. Setting the URL will override both Tenant and UseCustomService, so they are not required if specifying the URL by itself. You can find a list of available URLs at https://tenantname.crm.ondemand.com/sap/c4c/odata/v1/odataservicecatalog/ODataServiceCollection. Do not include the /$metadata part of the URL when entering this value - it should go to the service document root directory only. For instance: https://tenantname.crm.ondemand.com/sap/c4c/odata/v1/odataservicecatalog/

The SAP Cloud for Customer tenant a connection should be established to.

Data Type

string

Default Value

""

Remarks

The SAP Cloud for Customer tenant is part of your subscription. For instance, tenantname.crm.ondemand.com. Please include the full domain name as some tenants may not necessarily be on crm.ondemand.com.

Indicates if the custom SAP Cloud for Customer OData service should be used.

Data Type

bool

Default Value

false

Remarks

The customs SAP Cloud for Customer OData service must be manually configured in SAP Cloud for Customer. It allows integration of custom objects with the default ones. If you are not sure, leave this connection property set to false.

Specifies the authenticating user's user ID.

Data Type

string

Default Value

""

Remarks

The authenticating server requires both User and Password to validate the user's identity.

Specifies the authenticating user's password.

Data Type

string

Default Value

""

Remarks

The authenticating server requires both User and Password to validate the user's identity.

This section provides a complete list of the SSO properties you can configure in the connection string for this provider.

---

Property	Description
SSOProperties	Additional properties required to connect to the identity provider, formatted as a semicolon-separated list.

Additional properties required to connect to the identity provider, formatted as a semicolon-separated list.

Data Type

string

Default Value

""

Remarks

Additional properties required to connect to the identity provider, formatted as a semicolon-separated list.

This is used with the SSOLoginURL.

SSO configuration is discussed further in .

This section provides a complete list of the OAuth properties you can configure in the connection string for this provider.

---

Property	Description
OAuthClientId	Specifies the client ID (also known as the consumer key) assigned to your custom OAuth application. This ID is required to identify the application to the OAuth authorization server during authentication.
OAuthClientSecret	Specifies the client secret assigned to your custom OAuth application. This confidential value is used to authenticate the application to the OAuth authorization server. (Custom OAuth applications only.).

Specifies the client ID (also known as the consumer key) assigned to your custom OAuth application. This ID is required to identify the application to the OAuth authorization server during authentication.

Data Type

string

Default Value

""

Remarks

This property is required in two cases:

• When using a custom OAuth application, such as in web-based authentication flows, service-based authentication, or certificate-based flows that require application registration.
• If the driver does not provide embedded OAuth credentials.

(When the driver provides embedded OAuth credentials, this value may already be provided by the Cloud and thus not require manual entry.)

OAuthClientId is generally used alongside other OAuth-related properties such as OAuthClientSecret and OAuthSettingsLocation when configuring an authenticated connection.

OAuthClientId is one of the key connection parameters that need to be set before users can authenticate via OAuth. You can usually find this value in your identity provider’s application registration settings. Look for a field labeled Client ID, Application ID, or Consumer Key.

While the client ID is not considered a confidential value like a client secret, it is still part of your application's identity and should be handled carefully. Avoid exposing it in public repositories or shared configuration files.

For more information on how this property is used when configuring a connection, see Establishing a Connection.

Specifies the client secret assigned to your custom OAuth application. This confidential value is used to authenticate the application to the OAuth authorization server. (Custom OAuth applications only.).

Data Type

string

Default Value

""

Remarks

This property (sometimes called the application secret or consumer secret) is required when using a custom OAuth application in any flow that requires secure client authentication, such as web-based OAuth, service-based connections, or certificate-based authorization flows. It is not required when using an embedded OAuth application.

The client secret is used during the token exchange step of the OAuth flow, when the driver requests an access token from the authorization server. If this value is missing or incorrect, authentication fails with either an invalid_client or an unauthorized_client error.

OAuthClientSecret is one of the key connection parameters that need to be set before users can authenticate via OAuth. You can obtain this value from your identity provider when registering the OAuth application.

Notes:

• This value should be stored securely and never exposed in public repositories, scripts, or unsecured environments.
• Client secrets may also expire after a set period. Be sure to monitor expiration dates and rotate secrets as needed to maintain uninterrupted access.

For more information on how this property is used when configuring a connection, see Establishing a Connection

This section provides a complete list of the SSL properties you can configure in the connection string for this provider.

---

Property	Description
SSLServerCert	Specifies the certificate to be accepted from the server when connecting using TLS/SSL.

Specifies the certificate to be accepted from the server when connecting using TLS/SSL.

Data Type

string

Default Value

""

Remarks

If you are using a TLS/SSL connection, use this property to specify the TLS/SSL certificate to be accepted from the server. If you specify a value for this property, all other certificates that are not trusted by the machine are rejected.

This property can take the following forms:

Description	Example
A full PEM Certificate (example shortened for brevity)	-----BEGIN CERTIFICATE----- MIIChTCCAe4CAQAwDQYJKoZIhv......Qw== -----END CERTIFICATE-----
A path to a local file containing the certificate	C:\cert.cer
The public key (example shortened for brevity)	-----BEGIN RSA PUBLIC KEY----- MIGfMA0GCSq......AQAB -----END RSA PUBLIC KEY-----
The MD5 Thumbprint (hex values can also be either space- or colon-separated)	ecadbdda5a1529c58a1e9e09828d70e4
The SHA1 Thumbprint (hex values can also be either space- or colon-separated)	34a929226ae0819f2ec14b4a3d904f801cbb150d

Note: It is possible to use '*' to signify that all certificates should be accepted, but due to security concerns this is not recommended.

This section provides a complete list of the Logging properties you can configure in the connection string for this provider.

---

Property	Description
Verbosity	Specifies the verbosity level of the log file, which controls the amount of detail logged. Supported values range from 1 to 5.

Specifies the verbosity level of the log file, which controls the amount of detail logged. Supported values range from 1 to 5.

Data Type

string

Default Value

"1"

Remarks

This property defines the level of detail the Cloud includes in the log file. Higher verbosity levels increase the detail of the logged information, but may also result in larger log files and slower performance due to the additional data being captured.

The default verbosity level is 1, which is recommended for regular operation. Higher verbosity levels are primarily intended for debugging purposes. For more information on each level, refer to Logging.

When combined with the LogModules property, Verbosity can refine logging to specific categories of information.

This section provides a complete list of the Schema properties you can configure in the connection string for this provider.

---

Property	Description
BrowsableSchemas	Optional setting that restricts the schemas reported to a subset of all available schemas. For example, BrowsableSchemas=SchemaA,SchemaB,SchemaC .

Optional setting that restricts the schemas reported to a subset of all available schemas. For example, BrowsableSchemas=SchemaA,SchemaB,SchemaC .

Data Type

string

Default Value

""

Remarks

Listing all available database schemas can take extra time, thus degrading performance. Providing a list of schemas in the connection string saves time and improves performance.

This section provides a complete list of the Miscellaneous properties you can configure in the connection string for this provider.

---

Property	Description
MaxRows	Specifies the maximum number of rows returned for queries that do not include either aggregation or GROUP BY.
Pagesize	Specifies the maximum number of records per page the provider returns when requesting data from SAP Cloud for Customer.
PseudoColumns	Specifies the pseudocolumns to expose as table columns, expressed as a string in the format 'TableName=ColumnName;TableName=ColumnName'.
Timeout	Specifies the maximum time, in seconds, that the provider waits for a server response before throwing a timeout error.
UseClientSidePaging	Whether or not the CData ADO.NET Provider for SAP Cloud for Customer should use client side paging.

Specifies the maximum number of rows returned for queries that do not include either aggregation or GROUP BY.

Data Type

int

Default Value

-1

Remarks

The default value for this property, -1, means that no row limit is enforced unless the query explicitly includes a LIMIT clause. (When a query includes a LIMIT clause, the value specified in the query takes precedence over the MaxRows setting.)

Setting MaxRows to a whole number greater than 0 ensures that queries do not return excessively large result sets by default.

This property is useful for optimizing performance and preventing excessive resource consumption when executing queries that could otherwise return very large datasets.

Specifies the maximum number of records per page the provider returns when requesting data from SAP Cloud for Customer.

Data Type

int

Default Value

5000

Remarks

When processing a query, instead of requesting all of the queried data at once from SAP Cloud for Customer, the Cloud can request the queried data in pieces called pages.

This connection property determines the maximum number of results that the Cloud requests per page.

Note: Setting large page sizes may improve overall query execution time, but doing so causes the Cloud to use more memory when executing queries and risks triggering a timeout.

Specifies the pseudocolumns to expose as table columns, expressed as a string in the format 'TableName=ColumnName;TableName=ColumnName'.

Data Type

string

Default Value

""

Remarks

This property allows you to define which pseudocolumns the Cloud exposes as table columns.

To specify individual pseudocolumns, use the following format:

Table1=Column1;Table1=Column2;Table2=Column3

To include all pseudocolumns for all tables use:

*=*

Specifies the maximum time, in seconds, that the provider waits for a server response before throwing a timeout error.

Data Type

int

Default Value

60

Remarks

The timeout applies to each individual communication with the server rather than the entire query or operation. For example, a query could continue running beyond 60 seconds if each paging call completes within the timeout limit.

Timeout is set to 60 seconds by default. To disable timeouts, set this property to 0.

Disabling the timeout allows operations to run indefinitely until they succeed or fail due to other conditions such as server-side timeouts, network interruptions, or resource limits on the server.

Note: Use this property cautiously to avoid long-running operations that could degrade performance or result in unresponsive behavior.

Whether or not the CData ADO.NET Provider for SAP Cloud for Customer should use client side paging.

Data Type

bool

Default Value

true

Remarks

Some sources do not support server side paging. In these cases, set UseClientSidePaging to true. Otherwise, leave it as false. Setting UseClientSidePaging to true on a source that already supports paging can cause incomplete results.

LZMA from 7Zip LZMA SDK

LZMA SDK is placed in the public domain.

Anyone is free to copy, modify, publish, use, compile, sell, or distribute the original LZMA SDK code, either in source code form or as a compiled binary, for any purpose, commercial or non-commercial, and by any means.

LZMA2 from XZ SDK

Version 1.9 and older are in the public domain.

Xamarin.Forms

Xamarin SDK

The MIT License (MIT)

Copyright (c) .NET Foundation Contributors

All rights reserved.

Permission is hereby granted, free of charge, to any person obtaining a copy of this software and associated documentation files (the "Software"), to deal in the Software without restriction, including without limitation the rights to use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of the Software, and to permit persons to whom the Software is furnished to do so, subject to the following conditions:

The above copyright notice and this permission notice shall be included in all copies or substantial portions of the Software.

THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.

NSIS 3.10

Copyright (C) 1999-2025 Contributors THE ACCOMPANYING PROGRAM IS PROVIDED UNDER THE TERMS OF THIS COMMON PUBLIC LICENSE ("AGREEMENT"). ANY USE, REPRODUCTION OR DISTRIBUTION OF THE PROGRAM CONSTITUTES RECIPIENT'S ACCEPTANCE OF THIS AGREEMENT.

1. DEFINITIONS

"Contribution" means:

a) in the case of the initial Contributor, the initial code and documentation distributed under this Agreement, and b) in the case of each subsequent Contributor:

i) changes to the Program, and

ii) additions to the Program;

where such changes and/or additions to the Program originate from and are distributed by that particular Contributor. A Contribution 'originates' from a Contributor if it was added to the Program by such Contributor itself or anyone acting on such Contributor's behalf. Contributions do not include additions to the Program which: (i) are separate modules of software distributed in conjunction with the Program under their own license agreement, and (ii) are not derivative works of the Program.

"Contributor" means any person or entity that distributes the Program.

"Licensed Patents " mean patent claims licensable by a Contributor which are necessarily infringed by the use or sale of its Contribution alone or when combined with the Program.

"Program" means the Contributions distributed in accordance with this Agreement.

"Recipient" means anyone who receives the Program under this Agreement, including all Contributors.

2. GRANT OF RIGHTS

a) Subject to the terms of this Agreement, each Contributor hereby grants Recipient a non-exclusive, worldwide, royalty-free copyright license to reproduce, prepare derivative works of, publicly display, publicly perform, distribute and sublicense the Contribution of such Contributor, if any, and such derivative works, in source code and object code form.

b) Subject to the terms of this Agreement, each Contributor hereby grants Recipient a non-exclusive, worldwide, royalty-free patent license under Licensed Patents to make, use, sell, offer to sell, import and otherwise transfer the Contribution of such Contributor, if any, in source code and object code form. This patent license shall apply to the combination of the Contribution and the Program if, at the time the Contribution is added by the Contributor, such addition of the Contribution causes such combination to be covered by the Licensed Patents. The patent license shall not apply to any other combinations which include the Contribution. No hardware per se is licensed hereunder.

c) Recipient understands that although each Contributor grants the licenses to its Contributions set forth herein, no assurances are provided by any Contributor that the Program does not infringe the patent or other intellectual property rights of any other entity. Each Contributor disclaims any liability to Recipient for claims brought by any other entity based on infringement of intellectual property rights or otherwise. As a condition to exercising the rights and licenses granted hereunder, each Recipient hereby assumes sole responsibility to secure any other intellectual property rights needed, if any. For example, if a third party patent license is required to allow Recipient to distribute the Program, it is Recipient's responsibility to acquire that license before distributing the Program.

d) Each Contributor represents that to its knowledge it has sufficient copyright rights in its Contribution, if any, to grant the copyright license set forth in this Agreement.

3. REQUIREMENTS

A Contributor may choose to distribute the Program in object code form under its own license agreement, provided that:

a) it complies with the terms and conditions of this Agreement; and

b) its license agreement:

i) effectively disclaims on behalf of all Contributors all warranties and conditions, express and implied, including warranties or conditions of title and non-infringement, and implied warranties or conditions of merchantability and fitness for a particular purpose;

ii) effectively excludes on behalf of all Contributors all liability for damages, including direct, indirect, special, incidental and consequential damages, such as lost profits;

iii) states that any provisions which differ from this Agreement are offered by that Contributor alone and not by any other party; and

iv) states that source code for the Program is available from such Contributor, and informs licensees how to obtain it in a reasonable manner on or through a medium customarily used for software exchange.

When the Program is made available in source code form:

a) it must be made available under this Agreement; and

b) a copy of this Agreement must be included with each copy of the Program.

Contributors may not remove or alter any copyright notices contained within the Program.

Each Contributor must identify itself as the originator of its Contribution, if any, in a manner that reasonably allows subsequent Recipients to identify the originator of the Contribution.

4. COMMERCIAL DISTRIBUTION

Commercial distributors of software may accept certain responsibilities with respect to end users, business partners and the like. While this license is intended to facilitate the commercial use of the Program, the Contributor who includes the Program in a commercial product offering should do so in a manner which does not create potential liability for other Contributors. Therefore, if a Contributor includes the Program in a commercial product offering, such Contributor ("Commercial Contributor") hereby agrees to defend and indemnify every other Contributor ("Indemnified Contributor") against any losses, damages and costs (collectively "Losses") arising from claims, lawsuits and other legal actions brought by a third party against the Indemnified Contributor to the extent caused by the acts or omissions of such Commercial Contributor in connection with its distribution of the Program in a commercial product offering. The obligations in this section do not apply to any claims or Losses relating to any actual or alleged intellectual property infringement. In order to qualify, an Indemnified Contributor must: a) promptly notify the Commercial Contributor in writing of such claim, and b) allow the Commercial Contributor to control, and cooperate with the Commercial Contributor in, the defense and any related settlement negotiations. The Indemnified Contributor may participate in any such claim at its own expense.

For example, a Contributor might include the Program in a commercial product offering, Product X. That Contributor is then a Commercial Contributor. If that Commercial Contributor then makes performance claims, or offers warranties related to Product X, those performance claims and warranties are such Commercial Contributor's responsibility alone. Under this section, the Commercial Contributor would have to defend claims against the other Contributors related to those performance claims and warranties, and if a court requires any other Contributor to pay any damages as a result, the Commercial Contributor must pay those damages.

5. NO WARRANTY

EXCEPT AS EXPRESSLY SET FORTH IN THIS AGREEMENT, THE PROGRAM IS PROVIDED ON AN "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED INCLUDING, WITHOUT LIMITATION, ANY WARRANTIES OR CONDITIONS OF TITLE, NON-INFRINGEMENT, MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. Each Recipient is solely responsible for determining the appropriateness of using and distributing the Program and assumes all risks associated with its exercise of rights under this Agreement, including but not limited to the risks and costs of program errors, compliance with applicable laws, damage to or loss of data, programs or equipment, and unavailability or interruption of operations.

6. DISCLAIMER OF LIABILITY

EXCEPT AS EXPRESSLY SET FORTH IN THIS AGREEMENT, NEITHER RECIPIENT NOR ANY CONTRIBUTORS SHALL HAVE ANY LIABILITY FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING WITHOUT LIMITATION LOST PROFITS), HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OR DISTRIBUTION OF THE PROGRAM OR THE EXERCISE OF ANY RIGHTS GRANTED HEREUNDER, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.

7. GENERAL

If any provision of this Agreement is invalid or unenforceable under applicable law, it shall not affect the validity or enforceability of the remainder of the terms of this Agreement, and without further action by the parties hereto, such provision shall be reformed to the minimum extent necessary to make such provision valid and enforceable.

If Recipient institutes patent litigation against a Contributor with respect to a patent applicable to software (including a cross-claim or counterclaim in a lawsuit), then any patent licenses granted by that Contributor to such Recipient under this Agreement shall terminate as of the date such litigation is filed. In addition, if Recipient institutes patent litigation against any entity (including a cross-claim or counterclaim in a lawsuit) alleging that the Program itself (excluding combinations of the Program with other software or hardware) infringes such Recipient's patent(s), then such Recipient's rights granted under Section 2(b) shall terminate as of the date such litigation is filed.

All Recipient's rights under this Agreement shall terminate if it fails to comply with any of the material terms or conditions of this Agreement and does not cure such failure in a reasonable period of time after becoming aware of such noncompliance. If all Recipient's rights under this Agreement terminate, Recipient agrees to cease use and distribution of the Program as soon as reasonably practicable. However, Recipient's obligations under this Agreement and any licenses granted by Recipient relating to the Program shall continue and survive.

Everyone is permitted to copy and distribute copies of this Agreement, but in order to avoid inconsistency the Agreement is copyrighted and may only be modified in the following manner. The Agreement Steward reserves the right to publish new versions (including revisions) of this Agreement from time to time. No one other than the Agreement Steward has the right to modify this Agreement. IBM is the initial Agreement Steward. IBM may assign the responsibility to serve as the Agreement Steward to a suitable separate entity. Each new version of the Agreement will be given a distinguishing version number. The Program (including Contributions) may always be distributed subject to the version of the Agreement under which it was received. In addition, after a new version of the Agreement is published, Contributor may elect to distribute the Program (including its Contributions) under the new version. Except as expressly stated in Sections 2(a) and 2(b) above, Recipient receives no rights or licenses to the intellectual property of any Contributor under this Agreement, whether expressly, by implication, estoppel or otherwise. All rights in the Program not expressly granted under this Agreement are reserved.

This Agreement is governed by the laws of the State of New York and the intellectual property laws of the United States of America. No party to this Agreement will bring a legal action under this Agreement more than one year after the cause of action arose. Each party waives its rights to a jury trial in any resulting litigation.