Adding a Connection to AlloyDB

To add a connection to AlloyDB:

1. In the application console, navigate to the Connections page.
2. At the Add Connections panel, select the icon for the connection you want to add.
3. If the AlloyDB icon is not available, click the Add More icon to download and install the AlloyDB connector from the CData site.

For required properties, see the Settings tab.

For connection properties that are not typically required, see the Advanced tab.

Connecting to AlloyDB

The following connection properties are required in order to connect to AlloyDB.

• Server: The host name or IP of the server hosting the AlloyDB database.
• Port (optional): The port of the server hosting the AlloyDB database. This property is set to 5432 by default.
• User: The user which will be used to authenticate with the AlloyDB server.
• Password: The password which will be used to authenticate with the AlloyDB server.
• Database (optional): The database to connect to when connecting to the AlloyDB Server. If this is not set, the user's default database will be used.

Authenticating to AlloyDB

Standard Authentication

Standard authentication (using the user/password combination supplied earlier) is the default form of authentication.

No further action is required to leverage Standard Authentication to connect.

pg_hba.conf Auth Schemes

There are additional methods of authentication supported by the Sync App which must be enabled in the pg_hba.conf file on the AlloyDB server.

You may find instructions about authentication setup on the AlloyDB Server here.

MD5

You can authenticate using MD5 password verification by setting the auth-method in the pg_hba.conf file to md5.

SASL

The Sync App can authenticate by verifying the password with SASL (particularly, SCRAM-SHA-256).

To use this authentication method, set the auth-method in the pg_hba.conf file to scram-sha-256.

Kerberos

The authentication with Kerberos is initiated by AlloyDB Server when the CData Sync App is trying to connect to it. Set up Kerberos on the AlloyDB Server to activate this authentication method. Once you have Kerberos authentication set up on the AlloyDB server, see Using Kerberos for details regarding how to authenticate with Kerberos by the Sync App.

Kerberos

Authenticating to AlloyDB via Kerberos requires you to define authentication properties and to choose how Kerberos should retrieve authentication tickets.

Retrieve Kerberos Tickets

Kerberos tickets are used to authenticate the requester's identity. The use of tickets instead of formal logins/passwords eliminates the need to store passwords locally or send them over a network. Users are reauthenticated (tickets are refreshed) whenever they log in at their local computer or enter kinit USER at the command prompt.

The Sync App provides three ways to retrieve the required Kerberos ticket, depending on whether or not the KRB5CCNAME and/or KerberosKeytabFile variables exist in your environment.

MIT Kerberos Credential Cache File

This option enables you to use the MIT Kerberos Ticket Manager or kinit command to get tickets. With this option there is no need to set the User or Password connection properties.

This option requires that KRB5CCNAME has been created in your system.

To enable ticket retrieval via MIT Kerberos Credential Cache Files:

1. Ensure that the KRB5CCNAME variable is present in your environment.
2. Set KRB5CCNAME to a path that points to your credential cache file. (For example, C:\krb_cache\krb5cc_0 or /tmp/krb5cc_0.) The credential cache file is created when you use the MIT Kerberos Ticket Manager to generate your ticket.
3. To obtain a ticket:
   1. Open the MIT Kerberos Ticket Manager application.
   2. Click Get Ticket.
   3. Enter your principal name and password.
   4. Click OK.

   If the ticket is successfully obtained, the ticket information appears in Kerberos Ticket Manager and is stored in the credential cache file.

The Sync App uses the cache file to obtain the Kerberos ticket to connect to AlloyDB.

Note: If you would prefer not to edit KRB5CCNAME, you can use the KerberosTicketCache property to set the file path manually. After this is set, the Sync App uses the specified cache file to obtain the Kerberos ticket to connect to AlloyDB.

Keytab File

If your environment lacks the KRB5CCNAME environment variable, you can retrieve a Kerberos ticket using a Keytab File.

To use this method, set the User property to the desired username, and set the KerberosKeytabFile property to a file path pointing to the keytab file associated with the user.

User and Password

If your environment lacks the KRB5CCNAME environment variable and the KerberosKeytabFile property has not been set, you can retrieve a ticket using a user and password combination.

To use this method, set the User and Password properties to the user/password combination that you use to authenticate with AlloyDB.

Enabling Cross-Realm Authentication

More complex Kerberos environments can require cross-realm authentication where multiple realms and KDC servers are used. For example, they might use one realm/KDC for user authentication, and another realm/KDC for obtaining the service ticket.

To enable this kind of cross-realm authentication, set the KerberosRealm and KerberosKDC properties to the values required for user authentication. Also, set the KerberosServiceRealm and KerberosServiceKDC properties to the values required to obtain the service ticket.

CData Sync can use logical replication configured in AlloyDB to incrementally update your destination table. AlloyDB uses logical decoding to surface the contents of the write-ahead logs, which track data changes in the database, into a readable format. Those changes are read by Sync and pushed into the destination.

Enable Logical Replication for CData Sync

1. Ensure the wal_level is set to logical in in your AlloyDB database. You can set wal_level=logical in the postgresql.conf file.
2. Create a logical replication slot for Sync.
   

   	SELECT pg_create_logical_replication_slot('cdatasync_replication_slot', 'test_decoding');

   Note: The slot name'cdatasync_replication_slot' is an example and can be substituted with any name. You will need this slot name when creating your Job in Sync. It is important that this slot is only used by Sync since changes are consumed when reading from the slot.
3. Ensure that the user connecting from Sync has permission to read the replication slot.
   

   	ALTER ROLE <postgres-user> WITH REPLICATION;

4. In Sync, create a job with a AlloyDB sources. After selecting the "Change Data Capture" option, enter the replication slot name.

Deletion Behavior

Logical Replication allows Sync to track deleted records when the source table has a primary key. If the source table does not have a primary key, Sync will not be able to retrieve deleted records.

This section details a selection of advanced features of the AlloyDB Sync App.

SSL Configuration

Use SSL Configuration to adjust how Sync App handles TLS/SSL certificate negotiations. You can choose from various certificate formats;. For further information, see the SSLServerCert property under "Connection String Options" .

Firewall and Proxy

Configure the Sync App for compliance with Firewall and Proxy, including Windows proxies. You can also set up tunnel connections.

Logging

For an overview of configuration settings that can be used to refine CData logging, see Logging. Only two connection properties are required for basic logging, but there are numerous features that support more refined logging, which enables you to use the LogModules connection property to specify subsets of information to be logged.

Customizing the SSL Configuration

To enable TLS, set UseSSL to True.

With this configuration, the Sync App attempts to negotiate TLS with the server. The server certificate is validated against the default system trusted certificate store. You can override how the certificate gets validated using the SSLServerCert connection property.

To specify another certificate, see the SSLServerCert connection property.

Client SSL Certificates

The AlloyDB Sync App also supports setting client certificates. Set the following to connect using a client certificate.

• SSLClientCert: The name of the certificate store for the client certificate.
• SSLClientCertType: The type of key store containing the TLS/SSL client certificate.
• SSLClientCertPassword: The password for the TLS/SSL client certificate.
• SSLClientCertSubject: The subject of the TLS/SSL client certificate.

Connecting Through a Firewall or Proxy

Set the following properties:

• To use a proxy-based firewall, set FirewallType, FirewallServer, and FirewallPort.
• To tunnel the connection, set FirewallType to TUNNEL.
• To authenticate, specify FirewallUser and FirewallPassword.
• To authenticate to a SOCKS proxy, additionally set FirewallType to SOCKS5.

The Sync App models data directly from AlloyDB.

Data Type Mappings

The Sync App maps types from the data source to the corresponding data type available in the schema. The table below documents these mappings.

AlloyDB	CData Schema
abstime	string
aclitem	string
bigint	long
bigserial	long
bit varying	string
bit	string
boolean	bool
box	string
bytea	binary
char	string
character varying	string
character	string
cid	string
cidr	string
circle	string
date	date
daterange	string
double precision	float
gtsvector	string
inet	string
int2vector	string
int4range	string
int8range	string
integer	int
json	string
jsonb	binary
line	string
lseg	string
macaddr8	string
macaddr	string
money	decimal
name	string
numeric	decimal
numrange	string
oid	string
oidvector	string
path	string
pg_dependencies	string
pg_lsn	string
pg_ndistinct	string
pg_node_tree	string
point	string
polygon	string
real	float
refcursor	string
regclass	string
regconfig	string
regdictionary	string
regnamespace	string
regoper	string
regoperator	string
regproc	string
regprocedure	string
regrole	string
regtype	string
reltime	string
serial	int
smallint	int
smallserial	int
smgr	string
text	string
tid	string
time with time zone	string
time without time zone	time
timestamp with time zone	datetime
timestamp without time zone	datetime
tinterval	string
tsquery	string
tsrange	string
tstzrange	string
tsvector	string
txid_snapshot	string
uuid	string
xid	string
xml	string

The connection string properties are the various options that can be used to establish a connection. This section provides a complete list of the options you can configure in the connection string for this provider. Click the links for further details.

For more information on establishing a connection, see Establishing a Connection.

Authentication

---

Property	Description
AuthScheme	The scheme used for authentication. Accepted entries are Password, OAuth.
Server	The host name or IP address of the server.
Database	The name of the AlloyDB database.
User	Specifies the user ID of the authenticating AlloyDB user account.
Password	Specifies the password of the authenticating user account.
Port	The port number of the AlloyDB server.
UseSSL	This field sets whether SSL is enabled.
Visibility	Filters metadata for the user's permitted tables as a comma-separated list of queries. For example, to restrict visibility for SELECT and INSERT queries, specify 'SELECT,INSERT'. Permitted values: SELECT, INSERT, UPDATE, DELETE.

OAuth

---

Property	Description
OAuthClientId	Specifies the client Id that was assigned the custom OAuth application was created. (Also known as the consumer key.) This ID registers the custom application with the OAuth authorization server.
OAuthClientSecret	Specifies the client secret that was assigned when the custom OAuth application was created. (Also known as the consumer secret ). This secret registers the custom application with the OAuth authorization server.

Kerberos

---

Property	Description
KerberosKDC	The Kerberos Key Distribution Center (KDC) service used to authenticate the user.
KerberosRealm	The Kerberos Realm used to authenticate the user.
KerberosSPN	The service principal name (SPN) for the Kerberos Domain Controller.
KerberosUser	The principal name for the Kerberos Domain Controller. Used in the format host/user@realm.
KerberosKeytabFile	The Keytab file containing your pairs of Kerberos principals and encrypted keys.
KerberosServiceRealm	The Kerberos realm of the service.
KerberosServiceKDC	The Kerberos KDC of the service.
KerberosTicketCache	The full file path to an MIT Kerberos credential cache file.

SSL

---

Property	Description
SSLClientCert	Specifies the TLS/SSL client certificate store for SSL Client Authentication (2-way SSL). This property works in conjunction with other SSL-related properties to establish a secure connection.
SSLClientCertType	Specifies the type of key store containing the TLS/SSL client certificate for SSL Client Authentication. Choose from a variety of key store formats depending on your platform and certificate source.
SSLClientCertPassword	Specifes the password required to access the TLS/SSL client certificate store. Use this property if the selected certificate store type requires a password for access.
SSLClientCertSubject	Specifes the subject of the TLS/SSL client certificate to locate it in the certificate store. Use a comma-separated list of distinguished name fields, such as CN=www.server.com, C=US. The wildcard * selects the first certificate in the store.
SSLServerCert	Specifies the certificate to be accepted from the server when connecting using TLS/SSL.

SSH

---

Property	Description
SSHAuthMode	The authentication method used when establishing an SSH Tunnel to the service.
SSHClientCert	A certificate to be used for authenticating the SSHUser.
SSHClientCertPassword	The password of the SSHClientCert key if it has one.
SSHClientCertSubject	The subject of the SSH client certificate.
SSHClientCertType	The type of SSHClientCert private key.
SSHServer	The SSH server.
SSHPort	The SSH port.
SSHUser	The SSH user.
SSHPassword	The SSH password.
SSHServerFingerprint	The SSH server fingerprint.
UseSSH	Whether to tunnel the AlloyDB connection over SSH. Use SSH.

Firewall

---

Property	Description
FirewallType	Specifies the protocol the provider uses to tunnel traffic through a proxy-based firewall.
FirewallServer	Identifies the IP address, DNS name, or host name of a proxy used to traverse a firewall and relay user queries to network resources.
FirewallPort	Specifies the TCP port to be used for a proxy-based firewall.
FirewallUser	Identifies the user ID of the account authenticating to a proxy-based firewall.
FirewallPassword	Specifies the password of the user account authenticating to a proxy-based firewall.

Logging

---

Property	Description
LogModules	Specifies the core modules to include in the log file. Use a semicolon-separated list of module names. By default, all modules are logged.

Schema

---

Property	Description
Location	Specifies the location of a directory containing schema files that define tables, views, and stored procedures. Depending on your service's requirements, this may be expressed as either an absolute path or a relative path.
BrowsableSchemas	Optional setting that restricts the schemas reported to a subset of all available schemas. For example, BrowsableSchemas=SchemaA,SchemaB,SchemaC .
Tables	Optional setting that restricts the tables reported to a subset of all available tables. For example, Tables=TableA,TableB,TableC .
Views	Optional setting that restricts the views reported to a subset of the available tables. For example, Views=ViewA,ViewB,ViewC .
IgnoredSchemas	Visibility restriction filter which is used to hide schemas from the list of schemas obtained by querying metadata. For example, 'information_schema, pg_catalog'. Schema names are case sensitive.

Miscellaneous

---

Property	Description
AllowPreparedStatement	Prepare a query statement before its execution.
BrowsePartitions	By default, the provider exposes the super table and its partitions by metadata. You may hide sub partitions by setting this property to false.
FetchResultSetMetadata	This field sets whether the provider retrieves metadata pertaining to the schema and table name for resultset columns returned by the server.
IncludeTableTypes	If set to true, the provider will query for the types of individual tables and views.
MaxRows	Specifies the maximum rows returned for queries without aggregation or GROUP BY.
Other	Specifies additional hidden properties for specific use cases. These are not required for typical provider functionality. Use a semicolon-separated list to define multiple properties.
QueryPassthrough	This option passes the query to the AlloyDB server as is.
Timeout	Specifies the maximum time, in seconds, that the provider waits for a server response before throwing a timeout error. The default is 60 seconds. Set to 0 to disable the timeout.
TimeZone	Notifies the server about the timezone on the client with a standard SET TIMEZONE query when a connection is being opened.

This section provides a complete list of the Authentication properties you can configure in the connection string for this provider.

---

Property	Description
AuthScheme	The scheme used for authentication. Accepted entries are Password, OAuth.
Server	The host name or IP address of the server.
Database	The name of the AlloyDB database.
User	Specifies the user ID of the authenticating AlloyDB user account.
Password	Specifies the password of the authenticating user account.
Port	The port number of the AlloyDB server.
UseSSL	This field sets whether SSL is enabled.
Visibility	Filters metadata for the user's permitted tables as a comma-separated list of queries. For example, to restrict visibility for SELECT and INSERT queries, specify 'SELECT,INSERT'. Permitted values: SELECT, INSERT, UPDATE, DELETE.

The scheme used for authentication. Accepted entries are Password, OAuth.

Remarks

Together with User, this field is used to authenticate with the server. Password is the default option. Use the following options to select your authentication scheme:

• Password: Set this to use your AlloyDB database Password to connect by User.
• OAuth: Set this to authenticate with an AlloyDB instance using IAM credentials. Use User to point to respective AlloyDB user of IAM type.

The host name or IP address of the server.

Remarks

The host name or IP of the server hosting the AlloyDB Database. If not set, the default value "localhost" is used.

The name of the AlloyDB database.

Remarks

The database to connect to when connecting to the AlloyDB Server. If a database is not provided, the user's default database will be used.

Specifies the user ID of the authenticating AlloyDB user account.

Remarks

The authenticating server requires both User and Password to validate the user's identity.

Specifies the password of the authenticating user account.

Remarks

The authenticating server requires both User and Password to validate the user's identity.

The port number of the AlloyDB server.

Remarks

The port number of the Server hosting the AlloyDB Database. If not specified, the default port number (5432) is used.

This field sets whether SSL is enabled.

Remarks

This field sets whether the Sync App will attempt to negotiate TLS/SSL connections to the server. By default, the Sync App checks the server's certificate against the system's trusted certificate store. To specify another certificate, set SSLServerCert.

Filters metadata for the user's permitted tables as a comma-separated list of queries. For example, to restrict visibility for SELECT and INSERT queries, specify 'SELECT,INSERT'. Permitted values: SELECT, INSERT, UPDATE, DELETE.

Remarks

By default, visibility filtering is not applied. Filtering values are case insensitive.

For example, the 'SELECT,INSERT' filter is restricting metadata visibility only for those tables which may be accessed by the current user for the SELECT and INSERT operations. Supported privilege values are SELECT, INSERT, UPDATE, DELETE, REFERENCES.

This section provides a complete list of the OAuth properties you can configure in the connection string for this provider.

---

Property	Description
OAuthClientId	Specifies the client Id that was assigned the custom OAuth application was created. (Also known as the consumer key.) This ID registers the custom application with the OAuth authorization server.
OAuthClientSecret	Specifies the client secret that was assigned when the custom OAuth application was created. (Also known as the consumer secret ). This secret registers the custom application with the OAuth authorization server.

Specifies the client Id that was assigned the custom OAuth application was created. (Also known as the consumer key.) This ID registers the custom application with the OAuth authorization server.

Remarks

OAuthClientId is one of a handful of connection parameters that need to be set before users can authenticate via OAuth. For details, see Establishing a Connection.

Specifies the client secret that was assigned when the custom OAuth application was created. (Also known as the consumer secret ). This secret registers the custom application with the OAuth authorization server.

Remarks

OAuthClientSecret is one of a handful of connection parameters that need to be set before users can authenticate via OAuth. For details, see Establishing a Connection.

This section provides a complete list of the Kerberos properties you can configure in the connection string for this provider.

---

Property	Description
KerberosKDC	The Kerberos Key Distribution Center (KDC) service used to authenticate the user.
KerberosRealm	The Kerberos Realm used to authenticate the user.
KerberosSPN	The service principal name (SPN) for the Kerberos Domain Controller.
KerberosUser	The principal name for the Kerberos Domain Controller. Used in the format host/user@realm.
KerberosKeytabFile	The Keytab file containing your pairs of Kerberos principals and encrypted keys.
KerberosServiceRealm	The Kerberos realm of the service.
KerberosServiceKDC	The Kerberos KDC of the service.
KerberosTicketCache	The full file path to an MIT Kerberos credential cache file.

The Kerberos Key Distribution Center (KDC) service used to authenticate the user.

Remarks

The Kerberos properties are used when using SPNEGO or Windows Authentication. The Sync App will request session tickets and temporary session keys from the Kerberos KDC service. The Kerberos KDC service is conventionally colocated with the domain controller.

If Kerberos KDC is not specified, the Sync App will attempt to detect these properties automatically from the following locations:

• KRB5 Config File (krb5.ini/krb5.conf): If the KRB5_CONFIG environment variable is set and the file exists, the Sync App will obtain the KDC from the specified file. Otherwise, it will attempt to read from the default MIT location based on the OS: C:\ProgramData\MIT\Kerberos5\krb5.ini (Windows) or /etc/krb5.conf (Linux).
• Domain Name and Host: If the Kerberos Realm and Kerberos KDC could not be inferred from another location, the Sync App will infer them from the configured domain name and host.

The Kerberos Realm used to authenticate the user.

Remarks

The Kerberos properties are used when using SPNEGO or Windows Authentication. The Kerberos Realm is used to authenticate the user with the Kerberos Key Distribution Service (KDC). The Kerberos Realm can be configured by an administrator to be any string, but conventionally it is based on the domain name.

If Kerberos Realm is not specified, the Sync App will attempt to detect these properties automatically from the following locations:

• KRB5 Config File (krb5.ini/krb5.conf): If the KRB5_CONFIG environment variable is set and the file exists, the Sync App will obtain the default realm from the specified file. Otherwise, it will attempt to read from the default MIT location based on the OS: C:\ProgramData\MIT\Kerberos5\krb5.ini (Windows) or /etc/krb5.conf (Linux)
• Domain Name and Host: If the Kerberos Realm and Kerberos KDC could not be inferred from another location, the Sync App will infer them from the user-configured domain name and host. This might work in some Windows environments.

The service principal name (SPN) for the Kerberos Domain Controller.

Remarks

If the SPN on the Kerberos Domain Controller is not the same as the URL that you are authenticating to, use this property to set the SPN.

The principal name for the Kerberos Domain Controller. Used in the format host/user@realm.

Remarks

If the user you are using for the database doesn't match the user that is in the Kerberos database, this should be set to the Kerberos principal name.

The Keytab file containing your pairs of Kerberos principals and encrypted keys.

Remarks

The Keytab file containing your pairs of Kerberos principals and encrypted keys.

The Kerberos realm of the service.

Remarks

The KerberosServiceRealm is the specify the service Kerberos realm when using cross-realm Kerberos authentication.

In most cases, a single realm and KDC machine are used to perform the Kerberos authentication and this property is not required.

This property is available for complex setups where a different realm and KDC machine are used to obtain an authentication ticket (AS request) and a service ticket (TGS request).

The Kerberos KDC of the service.

Remarks

The KerberosServiceKDC is used to specify the service Kerberos KDC when using cross-realm Kerberos authentication.

In most cases, a single realm and KDC machine are used to perform the Kerberos authentication and this property is not required.

This property is available for complex setups where a different realm and KDC machine are used to obtain an authentication ticket (AS request) and a service ticket (TGS request).

The full file path to an MIT Kerberos credential cache file.

Remarks

This property can be set if you wish to use a credential cache file that was created using the MIT Kerberos Ticket Manager or kinit command.

This section provides a complete list of the SSL properties you can configure in the connection string for this provider.

---

Property	Description
SSLClientCert	Specifies the TLS/SSL client certificate store for SSL Client Authentication (2-way SSL). This property works in conjunction with other SSL-related properties to establish a secure connection.
SSLClientCertType	Specifies the type of key store containing the TLS/SSL client certificate for SSL Client Authentication. Choose from a variety of key store formats depending on your platform and certificate source.
SSLClientCertPassword	Specifes the password required to access the TLS/SSL client certificate store. Use this property if the selected certificate store type requires a password for access.
SSLClientCertSubject	Specifes the subject of the TLS/SSL client certificate to locate it in the certificate store. Use a comma-separated list of distinguished name fields, such as CN=www.server.com, C=US. The wildcard * selects the first certificate in the store.
SSLServerCert	Specifies the certificate to be accepted from the server when connecting using TLS/SSL.

Specifies the TLS/SSL client certificate store for SSL Client Authentication (2-way SSL). This property works in conjunction with other SSL-related properties to establish a secure connection.

Remarks

This property specifies the client certificate store for SSL Client Authentication. Use this property alongside SSLClientCertType, which defines the type of the certificate store, and SSLClientCertPassword, which specifies the password for password-protected stores. When SSLClientCert is set and SSLClientCertSubject is configured, the driver searches for a certificate matching the specified subject.

Certificate store designations vary by platform. On Windows, certificate stores are identified by names such as MY (personal certificates), while in Java, the certificate store is typically a file containing certificates and optional private keys.

The following are designations of the most common User and Machine certificate stores in Windows:

MY	A certificate store holding personal certificates with their associated private keys.
CA	Certifying authority certificates.
ROOT	Root certificates.
SPC	Software publisher certificates.

For PFXFile types, set this property to the filename. For PFXBlob types, set this property to the binary contents of the file in PKCS12 format.

Specifies the type of key store containing the TLS/SSL client certificate for SSL Client Authentication. Choose from a variety of key store formats depending on your platform and certificate source.

Remarks

This property determines the format and location of the key store used to provide the client certificate. Supported values include platform-specific and universal key store formats. The available values and their usage are:

USER - default	For Windows, this specifies that the certificate store is a certificate store owned by the current user. Note that this store type is not available in Java.
MACHINE	For Windows, this specifies that the certificate store is a machine store. Note that this store type is not available in Java.
PFXFILE	The certificate store is the name of a PFX (PKCS12) file containing certificates.
PFXBLOB	The certificate store is a string (base-64-encoded) representing a certificate store in PFX (PKCS12) format.
JKSFILE	The certificate store is the name of a Java key store (JKS) file containing certificates. Note that this store type is only available in Java.
JKSBLOB	The certificate store is a string (base-64-encoded) representing a certificate store in JKS format. Note that this store type is only available in Java.
PEMKEY_FILE	The certificate store is the name of a PEM-encoded file that contains a private key and an optional certificate.
PEMKEY_BLOB	The certificate store is a string (base64-encoded) that contains a private key and an optional certificate.
PUBLIC_KEY_FILE	The certificate store is the name of a file that contains a PEM- or DER-encoded public key certificate.
PUBLIC_KEY_BLOB	The certificate store is a string (base-64-encoded) that contains a PEM- or DER-encoded public key certificate.
SSHPUBLIC_KEY_FILE	The certificate store is the name of a file that contains an SSH-style public key.
SSHPUBLIC_KEY_BLOB	The certificate store is a string (base-64-encoded) that contains an SSH-style public key.
P7BFILE	The certificate store is the name of a PKCS7 file containing certificates.
PPKFILE	The certificate store is the name of a file that contains a PuTTY Private Key (PPK).
XMLFILE	The certificate store is the name of a file that contains a certificate in XML format.
XMLBLOB	The certificate store is a string that contains a certificate in XML format.
BCFKSFILE	The certificate store is the name of a file that contains an Bouncy Castle keystore.
BCFKSBLOB	The certificate store is a string (base-64-encoded) that contains a Bouncy Castle keystore.

Specifes the password required to access the TLS/SSL client certificate store. Use this property if the selected certificate store type requires a password for access.

Remarks

This property provides the password needed to open a password-protected certificate store. This property is necessary when using certificate stores that require a password for decryption, as is often recommended for PFX or JKS type stores.

If the certificate store type does not require a password, for example USER or MACHINE on Windows, this property can be left blank. Ensure that the password matches the one associated with the specified certificate store to avoid authentication errors.

Specifes the subject of the TLS/SSL client certificate to locate it in the certificate store. Use a comma-separated list of distinguished name fields, such as CN=www.server.com, C=US. The wildcard * selects the first certificate in the store.

Remarks

This property determines which client certificate to load based on its subject. The Sync App searches for a certificate that exactly matches the specified subject. If no exact match is found, the Sync App looks for certificates containing the value of the subject. If no match is found, no certificate is selected.

The subject should follow the standard format of a comma-separated list of distinguished name fields and values. For example, CN=www.server.com, OU=Test, C=US. Common fields include the following:

Field	Meaning
CN	Common Name. This is commonly a host name like www.server.com.
O	Organization
OU	Organizational Unit
L	Locality
S	State
C	Country
E	Email Address

Note: If any field contains special characters, such as commas, the value must be quoted. For example: CN="Example, Inc.", C=US.

Specifies the certificate to be accepted from the server when connecting using TLS/SSL.

Remarks

If using a TLS/SSL connection, this property can be used to specify the TLS/SSL certificate to be accepted from the server. Any other certificate that is not trusted by the machine is rejected.

This property can take the following forms:

Description	Example
A full PEM Certificate (example shortened for brevity)	-----BEGIN CERTIFICATE----- MIIChTCCAe4CAQAwDQYJKoZIhv......Qw== -----END CERTIFICATE-----
A path to a local file containing the certificate	C:\cert.cer
The public key (example shortened for brevity)	-----BEGIN RSA PUBLIC KEY----- MIGfMA0GCSq......AQAB -----END RSA PUBLIC KEY-----
The MD5 Thumbprint (hex values can also be either space or colon separated)	ecadbdda5a1529c58a1e9e09828d70e4
The SHA1 Thumbprint (hex values can also be either space or colon separated)	34a929226ae0819f2ec14b4a3d904f801cbb150d

If not specified, any certificate trusted by the machine is accepted.

Use '*' to signify to accept all certificates. Note that this is not recommended due to security concerns.

This section provides a complete list of the SSH properties you can configure in the connection string for this provider.

---

Property	Description
SSHAuthMode	The authentication method used when establishing an SSH Tunnel to the service.
SSHClientCert	A certificate to be used for authenticating the SSHUser.
SSHClientCertPassword	The password of the SSHClientCert key if it has one.
SSHClientCertSubject	The subject of the SSH client certificate.
SSHClientCertType	The type of SSHClientCert private key.
SSHServer	The SSH server.
SSHPort	The SSH port.
SSHUser	The SSH user.
SSHPassword	The SSH password.
SSHServerFingerprint	The SSH server fingerprint.
UseSSH	Whether to tunnel the AlloyDB connection over SSH. Use SSH.

The authentication method used when establishing an SSH Tunnel to the service.

Remarks

• None: No authentication is performed. The current SSHUser value is ignored, and the connection is logged in as anonymous.
• Password: The Sync App uses the values of SSHUser and SSHPassword to authenticate the user.
• Public_Key: The Sync App uses the values of SSHUser and SSHClientCert to authenticate the user. SSHClientCert must have a private key available for this authentication method to succeed.

A certificate to be used for authenticating the SSHUser.

Remarks

SSHClientCert must contain a valid private key in order to use public key authentication. A public key is optional, if one is not included then the Sync App generates it from the private key. The Sync App sends the public key to the server and the connection is allowed if the user has authorized the public key.

The SSHClientCertType field specifies the type of the key store specified by SSHClientCert. If the store is password protected, specify the password in SSHClientCertPassword.

Some types of key stores are containers which may include multiple keys. By default the Sync App will select the first key in the store, but you can specify a specific key using SSHClientCertSubject.

The password of the SSHClientCert key if it has one.

Remarks

This property is required for SSH tunneling when using certificate-based authentication. If the SSH certificate is in a password-protected key store, provide the password using this property to access the certificate.

The subject of the SSH client certificate.

Remarks

When loading a certificate the subject is used to locate the certificate in the store.

If an exact match is not found, the store is searched for subjects containing the value of the property.

If a match is still not found, the property is set to an empty string, and no certificate is selected.

The special value "*" picks the first certificate in the certificate store.

The certificate subject is a comma separated list of distinguished name fields and values. For instance "CN=www.server.com, OU=test, C=US, [email protected]". Common fields and their meanings are displayed below.

Field	Meaning
CN	Common Name. This is commonly a host name like www.server.com.
O	Organization
OU	Organizational Unit
L	Locality
S	State
C	Country
E	Email Address

If a field value contains a comma it must be quoted.

The type of SSHClientCert private key.

Remarks

This property can take one of the following values:

Types	Description	Allowed Blob Values
MACHINE/USER		Blob values are not supported.
JKSFILE/JKSBLOB		base64-only
PFXFILE/PFXBLOB	A PKCS12-format (.pfx) file. Must contain both a certificate and a private key.	base64-only
PEMKEY_FILE/PEMKEY_BLOB	A PEM-format file. Must contain an RSA, DSA, or OPENSSH private key. Can optionally contain a certificate matching the private key.	base64 or plain text. Newlines may be replaced with spaces when providing the blob as text.
PPKFILE/PPKBLOB	A PuTTY-format private key created using the puttygen tool.	base64-only
XMLFILE/XMLBLOB	An XML key in the format generated by the .NET RSA class: RSA.ToXmlString(true).	base64 or plain text.

The SSH server.

Remarks

The SSH server.

The SSH port.

Remarks

The SSH port.

The SSH user.

Remarks

The SSH user.

The SSH password.

Remarks

The SSH password.

The SSH server fingerprint.

Remarks

The SSH server fingerprint.

Whether to tunnel the AlloyDB connection over SSH. Use SSH.

Remarks

By default the Sync App will attempt to connect directly to AlloyDB. When this option is enabled, the Sync App will instead establish an SSH connection with the SSHServer and tunnel the connection to AlloyDB through it.

This section provides a complete list of the Firewall properties you can configure in the connection string for this provider.

---

Property	Description
FirewallType	Specifies the protocol the provider uses to tunnel traffic through a proxy-based firewall.
FirewallServer	Identifies the IP address, DNS name, or host name of a proxy used to traverse a firewall and relay user queries to network resources.
FirewallPort	Specifies the TCP port to be used for a proxy-based firewall.
FirewallUser	Identifies the user ID of the account authenticating to a proxy-based firewall.
FirewallPassword	Specifies the password of the user account authenticating to a proxy-based firewall.

Specifies the protocol the provider uses to tunnel traffic through a proxy-based firewall.

Remarks

A proxy-based firewall (or proxy firewall) is a network security device that acts as an intermediary between user requests and the resources they access. The proxy accepts the request of an authenticated user, tunnels through the firewall, and transmits the request to the appropriate server.

Because the proxy evaluates and transfers data backets on behalf of the requesting users, the users never connect directly with the servers, only with the proxy.

The following table provides port number information for each of the supported protocols.

Protocol	Default Port	Description
TUNNEL	80	The port where the Sync App opens a connection to AlloyDB. Traffic flows back and forth via the proxy at this location.
SOCKS4	1080	The port where the Sync App opens a connection to AlloyDB. SOCKS 4 then passes theFirewallUser value to the proxy, which determines whether the connection request should be granted.
SOCKS5	1080	The port where the Sync App sends data to AlloyDB. If the SOCKS 5 proxy requires authentication, set FirewallUser and FirewallPassword to credentials the proxy recognizes.

Identifies the IP address, DNS name, or host name of a proxy used to traverse a firewall and relay user queries to network resources.

Remarks

A proxy-based firewall (or proxy firewall) is a network security device that acts as an intermediary between user requests and the resources they access. The proxy accepts the request of an authenticated user, tunnels through the firewall, and transmits the request to the appropriate server.

Because the proxy evaluates and transfers data backets on behalf of the requesting users, the users never connect directly with the servers, only with the proxy.

Specifies the TCP port to be used for a proxy-based firewall.

Remarks

A proxy-based firewall (or proxy firewall) is a network security device that acts as an intermediary between user requests and the resources they access. The proxy accepts the request of an authenticated user, tunnels through the firewall, and transmits the request to the appropriate server.

Because the proxy evaluates and transfers data backets on behalf of the requesting users, the users never connect directly with the servers, only with the proxy.

Identifies the user ID of the account authenticating to a proxy-based firewall.

Remarks

A proxy-based firewall (or proxy firewall) is a network security device that acts as an intermediary between user requests and the resources they access. The proxy accepts the request of an authenticated user, tunnels through the firewall, and transmits the request to the appropriate server.

Because the proxy evaluates and transfers data backets on behalf of the requesting users, the users never connect directly with the servers, only with the proxy.

Specifies the password of the user account authenticating to a proxy-based firewall.

Remarks

A proxy-based firewall (or proxy firewall) is a network security device that acts as an intermediary between user requests and the resources they access. The proxy accepts the request of an authenticated user, tunnels through the firewall, and transmits the request to the appropriate server.

Because the proxy evaluates and transfers data backets on behalf of the requesting users, the users never connect directly with the servers, only with the proxy.

This section provides a complete list of the Logging properties you can configure in the connection string for this provider.

---

Property	Description
LogModules	Specifies the core modules to include in the log file. Use a semicolon-separated list of module names. By default, all modules are logged.

Specifies the core modules to include in the log file. Use a semicolon-separated list of module names. By default, all modules are logged.

Remarks

This property lets you customize the log file content by specifying the logging modules to include. Logging modules categorize logged information into distinct areas, such as query execution, metadata, or SSL communication. Each module is represented by a four-character code, with some requiring a trailing space for three-letter names.

For example, EXEC logs query execution, and INFO logs general provider messages. To include multiple modules, separate their names with semicolons as follows: INFO;EXEC;SSL.

The Verbosity connection property takes precedence over the module-based filtering specified by this property. Only log entries that meet the verbosity level and belong to the specified modules are logged. Leave this property blank to include all available modules in the log file.

For a complete list of available modules and detailed guidance on configuring logging, refer to the Advanced Logging section in Logging.

This section provides a complete list of the Schema properties you can configure in the connection string for this provider.

---

Property	Description
Location	Specifies the location of a directory containing schema files that define tables, views, and stored procedures. Depending on your service's requirements, this may be expressed as either an absolute path or a relative path.
BrowsableSchemas	Optional setting that restricts the schemas reported to a subset of all available schemas. For example, BrowsableSchemas=SchemaA,SchemaB,SchemaC .
Tables	Optional setting that restricts the tables reported to a subset of all available tables. For example, Tables=TableA,TableB,TableC .
Views	Optional setting that restricts the views reported to a subset of the available tables. For example, Views=ViewA,ViewB,ViewC .
IgnoredSchemas	Visibility restriction filter which is used to hide schemas from the list of schemas obtained by querying metadata. For example, 'information_schema, pg_catalog'. Schema names are case sensitive.

Specifies the location of a directory containing schema files that define tables, views, and stored procedures. Depending on your service's requirements, this may be expressed as either an absolute path or a relative path.

Remarks

The Location property is only needed if you want to either customize definitions (for example, change a column name, ignore a column, etc.) or extend the data model with new tables, views, or stored procedures.

If left unspecified, the default location is %APPDATA%\\CData\\AlloyDB Data Provider\\Schema, where %APPDATA% is set to the user's configuration directory:

Platform	%APPDATA%
Windows	The value of the APPDATA environment variable
Linux	~/.config

Optional setting that restricts the schemas reported to a subset of all available schemas. For example, BrowsableSchemas=SchemaA,SchemaB,SchemaC .

Remarks

Listing all available database schemas can take extra time, thus degrading performance. Providing a list of schemas in the connection string saves time and improves performance.

Optional setting that restricts the tables reported to a subset of all available tables. For example, Tables=TableA,TableB,TableC .

Remarks

Listing all available tables from some databases can take extra time, thus degrading performance. Providing a list of tables in the connection string saves time and improves performance.

If there are lots of tables available and you already know which ones you want to work with, you can use this property to restrict your viewing to only those tables. To do this, specify the tables you want in a comma-separated list. Each table should be a valid SQL identifier with any special characters escaped using square brackets, double-quotes or backticks. For example, Tables=TableA,[TableB/WithSlash],WithCatalog.WithSchema.`TableC With Space`.

Note: If you are connecting to a data source with multiple schemas or catalogs, you must specify each table you want to view by its fully qualified name. This avoids ambiguity between tables that may exist in multiple catalogs or schemas.

Optional setting that restricts the views reported to a subset of the available tables. For example, Views=ViewA,ViewB,ViewC .

Remarks

Listing all available views from some databases can take extra time, thus degrading performance. Providing a list of views in the connection string saves time and improves performance.

If there are lots of views available and you already know which ones you want to work with, you can use this property to restrict your viewing to only those views. To do this, specify the views you want in a comma-separated list. Each view should be a valid SQL identifier with any special characters escaped using square brackets, double-quotes or backticks. For example, Views=ViewA,[ViewB/WithSlash],WithCatalog.WithSchema.`ViewC With Space`.

Note: If you are connecting to a data source with multiple schemas or catalogs, you must specify each view you want to examine by its fully qualified name. This avoids ambiguity between views that may exist in multiple catalogs or schemas.

Visibility restriction filter which is used to hide schemas from the list of schemas obtained by querying metadata. For example, 'information_schema, pg_catalog'. Schema names are case sensitive.

Remarks

By default, restrictions are not applied. The property is inactive when BrowsableSchemas is specified.

This section provides a complete list of the Miscellaneous properties you can configure in the connection string for this provider.

---

Property	Description
AllowPreparedStatement	Prepare a query statement before its execution.
BrowsePartitions	By default, the provider exposes the super table and its partitions by metadata. You may hide sub partitions by setting this property to false.
FetchResultSetMetadata	This field sets whether the provider retrieves metadata pertaining to the schema and table name for resultset columns returned by the server.
IncludeTableTypes	If set to true, the provider will query for the types of individual tables and views.
MaxRows	Specifies the maximum rows returned for queries without aggregation or GROUP BY.
Other	Specifies additional hidden properties for specific use cases. These are not required for typical provider functionality. Use a semicolon-separated list to define multiple properties.
QueryPassthrough	This option passes the query to the AlloyDB server as is.
Timeout	Specifies the maximum time, in seconds, that the provider waits for a server response before throwing a timeout error. The default is 60 seconds. Set to 0 to disable the timeout.
TimeZone	Notifies the server about the timezone on the client with a standard SET TIMEZONE query when a connection is being opened.

Prepare a query statement before its execution.

Remarks

If the AllowPreparedStatement property is set to false, statements are parsed each time they are executed. Setting this property to false can be useful if you are executing many different queries only once.

If you are executing the same query repeatedly, you will generally see better performance by leaving this property set to the default, True. Preparing the query avoids recompiling the same query over and over. However, prepared statements also require the Sync App to keep the connection active and open while the statement is prepared.

By default, the provider exposes the super table and its partitions by metadata. You may hide sub partitions by setting this property to false.

Remarks

This property has an effect on the server with version 10 and later.

This field sets whether the provider retrieves metadata pertaining to the schema and table name for resultset columns returned by the server.

Remarks

By default, the Sync App will not request that the server provides detailed information about resultset columns like the table name or schema name. It requires issuing additional metadata queries via Sync App , and it may affect query performance essentially in some scenarios. Consider setting this property to True when you need such detailed descriptive information for the resultset columns.

If set to true, the provider will query for the types of individual tables and views.

Remarks

If set to true, the Sync App will query the AlloyDB server for the types of individual tables and views.

Specifies the maximum rows returned for queries without aggregation or GROUP BY.

Remarks

This property sets an upper limit on the number of rows the Sync App returns for queries that do not include aggregation or GROUP BY clauses. This limit ensures that queries do not return excessively large result sets by default.

When a query includes a LIMIT clause, the value specified in the query takes precedence over the MaxRows setting. If MaxRows is set to "-1", no row limit is enforced unless a LIMIT clause is explicitly included in the query.

This property is useful for optimizing performance and preventing excessive resource consumption when executing queries that could otherwise return very large datasets.

Specifies additional hidden properties for specific use cases. These are not required for typical provider functionality. Use a semicolon-separated list to define multiple properties.

Remarks

This property allows advanced users to configure hidden properties for specialized scenarios. These settings are not required for normal use cases but can address unique requirements or provide additional functionality. Multiple properties can be defined in a semicolon-separated list.

Note: It is strongly recommended to set these properties only when advised by the support team to address specific scenarios or issues.

Specify multiple properties in a semicolon-separated list.

Integration and Formatting

DefaultColumnSize	Sets the default length of string fields when the data source does not provide column length in the metadata. The default value is 2000.
ConvertDateTimeToGMT	Determines whether to convert date-time values to GMT, instead of the local time of the machine.
RecordToFile=filename	Records the underlying socket data transfer to the specified file.

This option passes the query to the AlloyDB server as is.

Remarks

When this is set, queries are passed through directly to AlloyDB.

Specifies the maximum time, in seconds, that the provider waits for a server response before throwing a timeout error. The default is 60 seconds. Set to 0 to disable the timeout.

Remarks

This property controls the maximum time, in seconds, that the Sync App waits for an operation to complete before canceling it. If the timeout period expires before the operation finishes, the Sync App cancels the operation and throws an exception.

The timeout applies to each individual communication with the server rather than the entire query or operation. For example, a query could continue running beyond 60 seconds if each paging call completes within the timeout limit.

Setting this property to 0 disables the timeout, allowing operations to run indefinitely until they succeed or fail due to other conditions such as server-side timeouts, network interruptions, or resource limits on the server. Use this property cautiously to avoid long-running operations that could degrade performance or result in unresponsive behavior.

Notifies the server about the timezone on the client with a standard SET TIMEZONE query when a connection is being opened.

Remarks

The server stores time with timezone and timestamp with timezone in UTC. When the server is accepting a value without timezone specified explicitly, it uses the TimeZone for the respective adjustment to UTC.

If the TimeZone property is not set, the provider uses the client's local timezone. Setting this property can be useful when you need the server to convert to a specific timezone, which is different from the client's local timezone.