Create a connection to AlloyDB by navigating to the Connections page in the Sync App application and selecting the corresponding icon in the Add Connections panel. If the AlloyDB icon is not available, click the Add More icon to download and install the AlloyDB connector from the CData site.

Required properties are listed under the Settings tab. The Advanced tab lists connection properties that are not typically required.

Connecting to AlloyDB

The following connection properties are required in order to connect to AlloyDB.

• Server: The host name or IP of the server hosting the AlloyDB database.
• Port (optional): The port of the server hosting the AlloyDB database. This property is set to 5432 by default.
• User: The user which will be used to authenticate with the AlloyDB server.
• Password: The password which will be used to authenticate with the AlloyDB server.
• Database (optional): The database to connect to when connecting to the AlloyDB Server. If this is not set, the user's default database will be used.

Authenticating to AlloyDB

Standard Authentication

Standard authentication (using the user/password combination supplied earlier) is the default form of authentication.

No further action is required to leverage Standard Authentication to connect.

pg_hba.conf Auth Schemes

There are additional methods of authentication supported by the Sync App which must be enabled in the pg_hba.conf file on the AlloyDB server.

You may find instructions about authentication setup on the AlloyDB Server here.

MD5

You can authenticate using MD5 password verification by setting the auth-method in the pg_hba.conf file to md5.

SASL

The Sync App can authenticate by verifying the password with SASL (particularly, SCRAM-SHA-256).

To use this authentication method, set the auth-method in the pg_hba.conf file to scram-sha-256.

Kerberos

The authentication with Kerberos is initiated by AlloyDB Server when the CData Sync App is trying to connect to it. Set up Kerberos on the AlloyDB Server to activate this authentication method. Once you have Kerberos authentication set up on the AlloyDB server, see Using Kerberos for details regarding how to authenticate with Kerberos by the Sync App.

This section shows how to use the Sync App to authenticate using Kerberos.

Kerberos

To authenticate to AlloyDB using Kerberos, set the following properties:

• KerberosKDC: Set this to the host name or IP Address of your Kerberos KDC machine.
• KerberosSPN: Set this to the service and host of the AlloyDB Kerberos Principal. This is the value prior to the '@' symbol (for instance, ServiceName/MyHost) of the principal value (for instance, ServiceName/[email protected]).

Retrieve the Kerberos Ticket

You can use one of the following options to retrieve the required Kerberos ticket.

MIT Kerberos Credential Cache File

This option enables you to use the MIT Kerberos Ticket Manager or kinit command to get tickets. Note that you do not need to set the User or Password connection properties with this option.

1. Ensure that you have an environment variable created called KRB5CCNAME.
2. Set the KRB5CCNAME environment variable to a path pointing to your credential cache file (for instance, C:\krb_cache\krb5cc_0 or /tmp/krb5cc_0). This file is created when generating your ticket with MIT Kerberos Ticket Manager.
3. To obtain a ticket, open the MIT Kerberos Ticket Manager application, click Get Ticket, enter your principal name and password, then click OK. If successful, ticket information appears in Kerberos Ticket Manager and is stored in the credential cache file.
4. Now that you have created the credential cache file, the Sync App uses the cache file to obtain the Kerberos ticket to connect to AlloyDB.

As an alternative to setting the KRB5CCNAME environment variable, you can directly set the file path using the KerberosTicketCache property. When set, the Sync App uses the specified cache file to obtain the Kerberos ticket to connect to AlloyDB.

Keytab File

If the KRB5CCNAME environment variable has not been set, you can retrieve a Kerberos ticket using a Keytab File. To do so, set the User property to the desired username and set the KerberosKeytabFile property to a file path pointing to the keytab file associated with the user.

User and Password

If both the KRB5CCNAME environment variable and the KerberosKeytabFile property have not been set, you can retrieve a ticket using a user and password combination. To do this, set the User and Password properties to the user/password combination that you use to authenticate with AlloyDB.

Cross-Realm

More complex Kerberos environments may require cross-realm authentication where multiple realms and KDC servers are used (e.g., where one realm/KDC is used for user authentication and another realm/KDC is used for obtaining the service ticket).

In such an environment, set the KerberosRealm and KerberosKDC properties to the values required for user authentication. Also set the KerberosServiceRealm and KerberosServiceKDC properties to the values required to obtain the service ticket.

CData Sync can use logical replication configured in AlloyDB to incrementally update your destination table. AlloyDB uses logical decoding to surface the contents of the write-ahead logs, which track data changes in the database, into a readable format. Those changes are read by Sync and pushed into the destination.

Enable Logical Replication for CData Sync

1. Ensure the wal_level is set to logical in in your AlloyDB database. You can set wal_level=logical in the postgresql.conf file.
2. Create a logical replication slot for Sync.
   

   	SELECT pg_create_logical_replication_slot('cdatasync_replication_slot', 'test_decoding');

   Note: The slot name'cdatasync_replication_slot' is an example and can be substituted with any name. You will need this slot name when creating your Job in Sync. It is important that this slot is only used by Sync since changes are consumed when reading from the slot.
3. Ensure that the user connecting from Sync has permission to read the replication slot.
   

   	ALTER ROLE <postgres-user> WITH REPLICATION;

4. In Sync, create a job with a AlloyDB sources. After selecting the "Change Data Capture" option, enter the replication slot name.

Deletion Behavior

Logical Replication allows Sync to track deleted records when the source table has a primary key. If the source table does not have a primary key, Sync will not be able to retrieve deleted records.

This section details a selection of advanced features of the AlloyDB Sync App.

SSL Configuration

Use SSL Configuration to adjust how Sync App handles TLS/SSL certificate negotiations. You can choose from various certificate formats; see the SSLServerCert property under "Connection String Options" for more information.

Firewall and Proxy

Configure the Sync App for compliance with Firewall and Proxy, including Windows proxies. You can also set up tunnel connections.

Logging

See Logging for an overview of configuration settings that can be used to refine CData logging. For basic logging, you only need to set two connection properties, but there are numerous features that support more refined logging, where you can select subsets of information to be logged using the LogModules connection property.

Customizing the SSL Configuration

By default, the Sync App attempts to negotiate SSL/TLS by checking the server's certificate against the system's trusted certificate store.

To specify another certificate, see the SSLServerCert property for the available formats to do so.

Client SSL Certificates

The AlloyDB Sync App also supports setting client certificates. Set the following to connect using a client certificate.

• SSLClientCert: The name of the certificate store for the client certificate.
• SSLClientCertType: The type of key store containing the TLS/SSL client certificate.
• SSLClientCertPassword: The password for the TLS/SSL client certificate.
• SSLClientCertSubject: The subject of the TLS/SSL client certificate.

Connecting Through a Firewall or Proxy

Set the following properties:

• To use a proxy-based firewall, set FirewallType, FirewallServer, and FirewallPort.
• To tunnel the connection, set FirewallType to TUNNEL.
• To authenticate, specify FirewallUser and FirewallPassword.
• To authenticate to a SOCKS proxy, additionally set FirewallType to SOCKS5.

The Sync App models data directly from AlloyDB.

Data Type Mappings

The Sync App maps types from the data source to the corresponding data type available in the schema. The table below documents these mappings.

AlloyDB	CData Schema
abstime	string
aclitem	string
bigint	long
bigserial	long
bit varying	string
bit	string
boolean	bool
box	string
bytea	binary
char	string
character varying	string
character	string
cid	string
cidr	string
circle	string
date	date
daterange	string
double precision	float
gtsvector	string
inet	string
int2vector	string
int4range	string
int8range	string
integer	int
json	string
jsonb	binary
line	string
lseg	string
macaddr8	string
macaddr	string
money	decimal
name	string
numeric	decimal
numrange	string
oid	string
oidvector	string
path	string
pg_dependencies	string
pg_lsn	string
pg_ndistinct	string
pg_node_tree	string
point	string
polygon	string
real	float
refcursor	string
regclass	string
regconfig	string
regdictionary	string
regnamespace	string
regoper	string
regoperator	string
regproc	string
regprocedure	string
regrole	string
regtype	string
reltime	string
serial	int
smallint	int
smallserial	int
smgr	string
text	string
tid	string
time with time zone	string
time without time zone	time
timestamp with time zone	datetime
timestamp without time zone	datetime
tinterval	string
tsquery	string
tsrange	string
tstzrange	string
tsvector	string
txid_snapshot	string
uuid	string
xid	string
xml	string

The connection string properties are the various options that can be used to establish a connection. This section provides a complete list of the options you can configure in the connection string for this provider. Click the links for further details.

For more information on establishing a connection, see Establishing a Connection.

Authentication

---

Property	Description
Server	The host name or IP address of the server.
Database	The name of the AlloyDB database.
User	The AlloyDB user account used to authenticate.
Password	The password used to authenticate the user.
Port	The port number of the AlloyDB server.
UseSSL	This field sets whether SSL is enabled.
Visibility	Visibility restrictions used to filter exposed metadata for tables with privileges granted to them for the current user.

Kerberos

---

Property	Description
KerberosKDC	The Kerberos Key Distribution Center (KDC) service used to authenticate the user.
KerberosRealm	The Kerberos Realm used to authenticate the user.
KerberosSPN	The service principal name (SPN) for the Kerberos Domain Controller.
KerberosKeytabFile	The Keytab file containing your pairs of Kerberos principals and encrypted keys.
KerberosServiceRealm	The Kerberos realm of the service.
KerberosServiceKDC	The Kerberos KDC of the service.
KerberosTicketCache	The full file path to an MIT Kerberos credential cache file.

SSL

---

Property	Description
SSLClientCert	The TLS/SSL client certificate store for SSL Client Authentication (2-way SSL).
SSLClientCertType	The type of key store containing the TLS/SSL client certificate.
SSLClientCertPassword	The password for the TLS/SSL client certificate.
SSLClientCertSubject	The subject of the TLS/SSL client certificate.
SSLServerCert	The certificate to be accepted from the server when connecting using TLS/SSL.

SSH

---

Property	Description
SSHAuthMode	The authentication method to be used to log on to an SFTP server.
SSHClientCert	A private key to be used for authenticating the user.
SSHClientCertPassword	The password of the SSHClientCert key if it has one.
SSHClientCertSubject	The subject of the SSH client certificate.
SSHClientCertType	The type of SSHClientCert private key.
SSHServer	The SSH server.
SSHPort	The SSH port.
SSHUser	The SSH user.
SSHPassword	The SSH password.
SSHServerFingerprint	The SSH server fingerprint.
UseSSH	Whether to tunnel the AlloyDB connection over SSH. Use SSH.

Firewall

---

Property	Description
FirewallType	The protocol used by a proxy-based firewall.
FirewallServer	The name or IP address of a proxy-based firewall.
FirewallPort	The TCP port for a proxy-based firewall.
FirewallUser	The user name to use to authenticate with a proxy-based firewall.
FirewallPassword	A password used to authenticate to a proxy-based firewall.

Logging

---

Property	Description
LogModules	Core modules to be included in the log file.

Schema

---

Property	Description
Location	A path to the directory that contains the schema files defining tables, views, and stored procedures.
BrowsableSchemas	This property restricts the schemas reported to a subset of the available schemas. For example, BrowsableSchemas=SchemaA,SchemaB,SchemaC.
Tables	This property restricts the tables reported to a subset of the available tables. For example, Tables=TableA,TableB,TableC.
Views	Restricts the views reported to a subset of the available tables. For example, Views=ViewA,ViewB,ViewC.
IgnoredSchemas	Visibility restriction filter which is used to hide schemas from the list of schemas obtained by querying metadata. For example, 'information_schema, pg_catalog'. Schema names are case sensitive.

Miscellaneous

---

Property	Description
AllowPreparedStatement	Prepare a query statement before its execution.
BrowsePartitions	By default, the provider exposes the super table and its partitions by metadata. You may hide sub partitions by setting this property to false.
FetchResultSetMetadata	This field sets whether the provider retrieves metadata pertaining to the schema and table name for resultset columns returned by the server.
IncludeTableTypes	If set to true, the provider will query for the types of individual tables and views.
MaxRows	Limits the number of rows returned rows when no aggregation or group by is used in the query. This helps avoid performance issues at design time.
Other	These hidden properties are used only in specific use cases.
QueryPassthrough	This option passes the query to the AlloyDB server as is.
Timeout	The value in seconds until the timeout error is thrown, canceling the operation.
TimeZone	Notifies the server about the timezone on the client with a standard SET TIMEZONE query when a connection is being opened.

This section provides a complete list of the Authentication properties you can configure in the connection string for this provider.

---

Property	Description
Server	The host name or IP address of the server.
Database	The name of the AlloyDB database.
User	The AlloyDB user account used to authenticate.
Password	The password used to authenticate the user.
Port	The port number of the AlloyDB server.
UseSSL	This field sets whether SSL is enabled.
Visibility	Visibility restrictions used to filter exposed metadata for tables with privileges granted to them for the current user.

The host name or IP address of the server.

Remarks

The host name or IP of the server hosting the AlloyDB Database. If not set, the default value "localhost" is used.

The name of the AlloyDB database.

Remarks

The database to connect to when connecting to the AlloyDB Server. If a database is not provided, the user's default database will be used.

The AlloyDB user account used to authenticate.

Remarks

Together with Password, this field is used to authenticate against the AlloyDB server.

The password used to authenticate the user.

Remarks

The User and Password are together used to authenticate with the server.

The port number of the AlloyDB server.

Remarks

The port number of the Server hosting the AlloyDB Database. If not specified, the default port number (5432) is used.

This field sets whether SSL is enabled.

Remarks

This field sets whether the Sync App will attempt to negotiate TLS/SSL connections to the server. By default, the Sync App checks the server's certificate against the system's trusted certificate store. To specify another certificate, set SSLServerCert.

Visibility restrictions used to filter exposed metadata for tables with privileges granted to them for the current user.

Remarks

By default, visibility filtering is not applied. Filtering values are case insensitive.

For example, the 'SELECT,INSERT' filter is restricting metadata visibility only for those tables which may be accessed by the current user for the SELECT and INSERT operations. Supported privilege values are SELECT, INSERT, UPDATE, DELETE, REFERENCES.

This section provides a complete list of the Kerberos properties you can configure in the connection string for this provider.

---

Property	Description
KerberosKDC	The Kerberos Key Distribution Center (KDC) service used to authenticate the user.
KerberosRealm	The Kerberos Realm used to authenticate the user.
KerberosSPN	The service principal name (SPN) for the Kerberos Domain Controller.
KerberosKeytabFile	The Keytab file containing your pairs of Kerberos principals and encrypted keys.
KerberosServiceRealm	The Kerberos realm of the service.
KerberosServiceKDC	The Kerberos KDC of the service.
KerberosTicketCache	The full file path to an MIT Kerberos credential cache file.

The Kerberos Key Distribution Center (KDC) service used to authenticate the user.

Remarks

The Kerberos properties are used when using SPNEGO or Windows Authentication. The Sync App will request session tickets and temporary session keys from the Kerberos KDC service. The Kerberos KDC service is conventionally colocated with the domain controller.

If Kerberos KDC is not specified, the Sync App will attempt to detect these properties automatically from the following locations:

• KRB5 Config File (krb5.ini/krb5.conf): If the KRB5_CONFIG environment variable is set and the file exists, the Sync App will obtain the KDC from the specified file. Otherwise, it will attempt to read from the default MIT location based on the OS: C:\ProgramData\MIT\Kerberos5\krb5.ini (Windows) or /etc/krb5.conf (Linux).
• Domain Name and Host: If the Kerberos Realm and Kerberos KDC could not be inferred from another location, the Sync App will infer them from the configured domain name and host.

The Kerberos Realm used to authenticate the user.

Remarks

The Kerberos properties are used when using SPNEGO or Windows Authentication. The Kerberos Realm is used to authenticate the user with the Kerberos Key Distribution Service (KDC). The Kerberos Realm can be configured by an administrator to be any string, but conventionally it is based on the domain name.

If Kerberos Realm is not specified, the Sync App will attempt to detect these properties automatically from the following locations:

• KRB5 Config File (krb5.ini/krb5.conf): If the KRB5_CONFIG environment variable is set and the file exists, the Sync App will obtain the default realm from the specified file. Otherwise, it will attempt to read from the default MIT location based on the OS: C:\ProgramData\MIT\Kerberos5\krb5.ini (Windows) or /etc/krb5.conf (Linux)
• Domain Name and Host: If the Kerberos Realm and Kerberos KDC could not be inferred from another location, the Sync App will infer them from the user-configured domain name and host. This might work in some Windows environments.

The service principal name (SPN) for the Kerberos Domain Controller.

Remarks

If the SPN on the Kerberos Domain Controller is not the same as the URL that you are authenticating to, use this property to set the SPN.

The Keytab file containing your pairs of Kerberos principals and encrypted keys.

Remarks

The Keytab file containing your pairs of Kerberos principals and encrypted keys.

The Kerberos realm of the service.

Remarks

The KerberosServiceRealm is the specify the service Kerberos realm when using cross-realm Kerberos authentication.

In most cases, a single realm and KDC machine are used to perform the Kerberos authentication and this property is not required.

This property is available for complex setups where a different realm and KDC machine are used to obtain an authentication ticket (AS request) and a service ticket (TGS request).

The Kerberos KDC of the service.

Remarks

The KerberosServiceKDC is used to specify the service Kerberos KDC when using cross-realm Kerberos authentication.

In most cases, a single realm and KDC machine are used to perform the Kerberos authentication and this property is not required.

This property is available for complex setups where a different realm and KDC machine are used to obtain an authentication ticket (AS request) and a service ticket (TGS request).

The full file path to an MIT Kerberos credential cache file.

Remarks

This property can be set if you wish to use a credential cache file that was created using the MIT Kerberos Ticket Manager or kinit command.

This section provides a complete list of the SSL properties you can configure in the connection string for this provider.

---

Property	Description
SSLClientCert	The TLS/SSL client certificate store for SSL Client Authentication (2-way SSL).
SSLClientCertType	The type of key store containing the TLS/SSL client certificate.
SSLClientCertPassword	The password for the TLS/SSL client certificate.
SSLClientCertSubject	The subject of the TLS/SSL client certificate.
SSLServerCert	The certificate to be accepted from the server when connecting using TLS/SSL.

The TLS/SSL client certificate store for SSL Client Authentication (2-way SSL).

Remarks

The name of the certificate store for the client certificate.

The SSLClientCertType field specifies the type of the certificate store specified by SSLClientCert. If the store is password protected, specify the password in SSLClientCertPassword.

SSLClientCert is used in conjunction with the SSLClientCertSubject field in order to specify client certificates. If SSLClientCert has a value, and SSLClientCertSubject is set, a search for a certificate is initiated. See SSLClientCertSubject for more information.

Designations of certificate stores are platform-dependent.

The following are designations of the most common User and Machine certificate stores in Windows:

MY	A certificate store holding personal certificates with their associated private keys.
CA	Certifying authority certificates.
ROOT	Root certificates.
SPC	Software publisher certificates.

In Java, the certificate store normally is a file containing certificates and optional private keys.

When the certificate store type is PFXFile, this property must be set to the name of the file. When the type is PFXBlob, the property must be set to the binary contents of a PFX file (for example, PKCS12 certificate store).

The type of key store containing the TLS/SSL client certificate.

Remarks

This property can take one of the following values:

USER - default	For Windows, this specifies that the certificate store is a certificate store owned by the current user. Note that this store type is not available in Java.
MACHINE	For Windows, this specifies that the certificate store is a machine store. Note that this store type is not available in Java.
PFXFILE	The certificate store is the name of a PFX (PKCS12) file containing certificates.
PFXBLOB	The certificate store is a string (base-64-encoded) representing a certificate store in PFX (PKCS12) format.
JKSFILE	The certificate store is the name of a Java key store (JKS) file containing certificates. Note that this store type is only available in Java.
JKSBLOB	The certificate store is a string (base-64-encoded) representing a certificate store in JKS format. Note that this store type is only available in Java.
PEMKEY_FILE	The certificate store is the name of a PEM-encoded file that contains a private key and an optional certificate.
PEMKEY_BLOB	The certificate store is a string (base64-encoded) that contains a private key and an optional certificate.
PUBLIC_KEY_FILE	The certificate store is the name of a file that contains a PEM- or DER-encoded public key certificate.
PUBLIC_KEY_BLOB	The certificate store is a string (base-64-encoded) that contains a PEM- or DER-encoded public key certificate.
SSHPUBLIC_KEY_FILE	The certificate store is the name of a file that contains an SSH-style public key.
SSHPUBLIC_KEY_BLOB	The certificate store is a string (base-64-encoded) that contains an SSH-style public key.
P7BFILE	The certificate store is the name of a PKCS7 file containing certificates.
PPKFILE	The certificate store is the name of a file that contains a PuTTY Private Key (PPK).
XMLFILE	The certificate store is the name of a file that contains a certificate in XML format.
XMLBLOB	The certificate store is a string that contains a certificate in XML format.

The password for the TLS/SSL client certificate.

Remarks

If the certificate store is of a type that requires a password, this property is used to specify that password to open the certificate store.

The subject of the TLS/SSL client certificate.

Remarks

When loading a certificate the subject is used to locate the certificate in the store.

If an exact match is not found, the store is searched for subjects containing the value of the property. If a match is still not found, the property is set to an empty string, and no certificate is selected.

The special value "*" picks the first certificate in the certificate store.

The certificate subject is a comma separated list of distinguished name fields and values. For example, "CN=www.server.com, OU=test, C=US, [email protected]". The common fields and their meanings are shown below.

Field	Meaning
CN	Common Name. This is commonly a host name like www.server.com.
O	Organization
OU	Organizational Unit
L	Locality
S	State
C	Country
E	Email Address

If a field value contains a comma, it must be quoted.

The certificate to be accepted from the server when connecting using TLS/SSL.

Remarks

If using a TLS/SSL connection, this property can be used to specify the TLS/SSL certificate to be accepted from the server. Any other certificate that is not trusted by the machine is rejected.

This property can take the following forms:

Description	Example
A full PEM Certificate (example shortened for brevity)	-----BEGIN CERTIFICATE----- MIIChTCCAe4CAQAwDQYJKoZIhv......Qw== -----END CERTIFICATE-----
A path to a local file containing the certificate	C:\cert.cer
The public key (example shortened for brevity)	-----BEGIN RSA PUBLIC KEY----- MIGfMA0GCSq......AQAB -----END RSA PUBLIC KEY-----
The MD5 Thumbprint (hex values can also be either space or colon separated)	ecadbdda5a1529c58a1e9e09828d70e4
The SHA1 Thumbprint (hex values can also be either space or colon separated)	34a929226ae0819f2ec14b4a3d904f801cbb150d

If not specified, any certificate trusted by the machine is accepted.

Use '*' to signify to accept all certificates. Note that this is not recommended due to security concerns.

This section provides a complete list of the SSH properties you can configure in the connection string for this provider.

---

Property	Description
SSHAuthMode	The authentication method to be used to log on to an SFTP server.
SSHClientCert	A private key to be used for authenticating the user.
SSHClientCertPassword	The password of the SSHClientCert key if it has one.
SSHClientCertSubject	The subject of the SSH client certificate.
SSHClientCertType	The type of SSHClientCert private key.
SSHServer	The SSH server.
SSHPort	The SSH port.
SSHUser	The SSH user.
SSHPassword	The SSH password.
SSHServerFingerprint	The SSH server fingerprint.
UseSSH	Whether to tunnel the AlloyDB connection over SSH. Use SSH.

The authentication method to be used to log on to an SFTP server.

Remarks

• None: No authentication will be performed. The current User value is ignored, and the connection will be logged in as anonymous.
• Password: The Sync App will use the values of User and Password to authenticate the user.
• Public_Key: The Sync App will use the values of User and SSHClientCert to authenticate the user. SSHClientCert must have a private key available for this authentication method to succeed.

A private key to be used for authenticating the user.

Remarks

SSHClientCert must contain a valid private key in order to use public key authentication. A public key is optional, if one is not included then the Sync App generates it from the private key. The Sync App sends the public key to the server and the connection is allowed if the user has authorized the public key.

The SSHClientCertType field specifies the type of the key store specified by SSHClientCert. If the store is password protected, specify the password in SSHClientCertPassword.

Some types of key stores are containers which may include multiple keys. By default the Sync App will select the first key in the store, but you can specify a specific key using SSHClientCertSubject.

The password of the SSHClientCert key if it has one.

Remarks

This property is only used when authenticating to SFTP servers with SSHAuthMode set to PublicKey and SSHClientCert set to a private key.

The subject of the SSH client certificate.

Remarks

When loading a certificate the subject is used to locate the certificate in the store.

If an exact match is not found, the store is searched for subjects containing the value of the property.

If a match is still not found, the property is set to an empty string, and no certificate is selected.

The special value "*" picks the first certificate in the certificate store.

The certificate subject is a comma separated list of distinguished name fields and values. For instance "CN=www.server.com, OU=test, C=US, [email protected]". Common fields and their meanings are displayed below.

Field	Meaning
CN	Common Name. This is commonly a host name like www.server.com.
O	Organization
OU	Organizational Unit
L	Locality
S	State
C	Country
E	Email Address

If a field value contains a comma it must be quoted.

The type of SSHClientCert private key.

Remarks

This property can take one of the following values:

Types	Description	Allowed Blob Values
MACHINE/USER		Blob values are not supported.
JKSFILE/JKSBLOB		base64-only
PFXFILE/PFXBLOB	A PKCS12-format (.pfx) file. Must contain both a certificate and a private key.	base64-only
PEMKEY_FILE/PEMKEY_BLOB	A PEM-format file. Must contain an RSA, DSA, or OPENSSH private key. Can optionally contain a certificate matching the private key.	base64 or plain text. Newlines may be replaced with spaces when providing the blob as text.
PPKFILE/PPKBLOB	A PuTTY-format private key created using the puttygen tool.	base64-only
XMLFILE/XMLBLOB	An XML key in the format generated by the .NET RSA class: RSA.ToXmlString(true).	base64 or plain text.

The SSH server.

Remarks

The SSH server.

The SSH port.

Remarks

The SSH port.

The SSH user.

Remarks

The SSH user.

The SSH password.

Remarks

The SSH password.

The SSH server fingerprint.

Remarks

The SSH server fingerprint.

Whether to tunnel the AlloyDB connection over SSH. Use SSH.

Remarks

By default the Sync App will attempt to connect directly to AlloyDB. When this option is enabled, the Sync App will instead establish an SSH connection with the SSHServer and tunnel the connection to AlloyDB through it.

This section provides a complete list of the Firewall properties you can configure in the connection string for this provider.

---

Property	Description
FirewallType	The protocol used by a proxy-based firewall.
FirewallServer	The name or IP address of a proxy-based firewall.
FirewallPort	The TCP port for a proxy-based firewall.
FirewallUser	The user name to use to authenticate with a proxy-based firewall.
FirewallPassword	A password used to authenticate to a proxy-based firewall.

The protocol used by a proxy-based firewall.

Remarks

This property specifies the protocol that the Sync App will use to tunnel traffic through the FirewallServer proxy.

Type	Default Port	Description
TUNNEL	80	When this is set, the Sync App opens a connection to AlloyDB and traffic flows back and forth through the proxy.
SOCKS4	1080	When this is set, the Sync App sends data through the SOCKS 4 proxy specified by FirewallServer and FirewallPort and passes the FirewallUser value to the proxy, which determines if the connection request should be granted.
SOCKS5	1080	When this is set, the Sync App sends data through the SOCKS 5 proxy specified by FirewallServer and FirewallPort. If your proxy requires authentication, set FirewallUser and FirewallPassword to credentials the proxy recognizes.

The name or IP address of a proxy-based firewall.

Remarks

This property specifies the IP address, DNS name, or host name of a proxy allowing traversal of a firewall. The protocol is specified by FirewallType: Use FirewallServer with this property to connect through SOCKS or do tunneling.

The TCP port for a proxy-based firewall.

Remarks

This specifies the TCP port for a proxy allowing traversal of a firewall. Use FirewallServer to specify the name or IP address. Specify the protocol with FirewallType.

The user name to use to authenticate with a proxy-based firewall.

Remarks

The FirewallUser and FirewallPassword properties are used to authenticate against the proxy specified in FirewallServer and FirewallPort, following the authentication method specified in FirewallType.

A password used to authenticate to a proxy-based firewall.

Remarks

This property is passed to the proxy specified by FirewallServer and FirewallPort, following the authentication method specified by FirewallType.

This section provides a complete list of the Logging properties you can configure in the connection string for this provider.

---

Property	Description
LogModules	Core modules to be included in the log file.

Core modules to be included in the log file.

Remarks

Only the modules specified (separated by ';') will be included in the log file. By default all modules are included.

See the Logging page for an overview.

This section provides a complete list of the Schema properties you can configure in the connection string for this provider.

---

Property	Description
Location	A path to the directory that contains the schema files defining tables, views, and stored procedures.
BrowsableSchemas	This property restricts the schemas reported to a subset of the available schemas. For example, BrowsableSchemas=SchemaA,SchemaB,SchemaC.
Tables	This property restricts the tables reported to a subset of the available tables. For example, Tables=TableA,TableB,TableC.
Views	Restricts the views reported to a subset of the available tables. For example, Views=ViewA,ViewB,ViewC.
IgnoredSchemas	Visibility restriction filter which is used to hide schemas from the list of schemas obtained by querying metadata. For example, 'information_schema, pg_catalog'. Schema names are case sensitive.

A path to the directory that contains the schema files defining tables, views, and stored procedures.

Remarks

The path to a directory which contains the schema files for the Sync App (.rsd files for tables and views, .rsb files for stored procedures). The folder location can be a relative path from the location of the executable. The Location property is only needed if you want to customize definitions (for example, change a column name, ignore a column, and so on) or extend the data model with new tables, views, or stored procedures.

If left unspecified, the default location is "%APPDATA%\\CData\\AlloyDB Data Provider\\Schema" with %APPDATA% being set to the user's configuration directory:

This property restricts the schemas reported to a subset of the available schemas. For example, BrowsableSchemas=SchemaA,SchemaB,SchemaC.

Remarks

Listing the schemas from databases can be expensive. Providing a list of schemas in the connection string improves the performance.

This property restricts the tables reported to a subset of the available tables. For example, Tables=TableA,TableB,TableC.

Remarks

Listing the tables from some databases can be expensive. Providing a list of tables in the connection string improves the performance of the Sync App.

This property can also be used as an alternative to automatically listing views if you already know which ones you want to work with and there would otherwise be too many to work with.

Specify the tables you want in a comma-separated list. Each table should be a valid SQL identifier with any special characters escaped using square brackets, double-quotes or backticks. For example, Tables=TableA,[TableB/WithSlash],WithCatalog.WithSchema.`TableC With Space`.

Note that when connecting to a data source with multiple schemas or catalogs, you will need to provide the fully qualified name of the table in this property, as in the last example here, to avoid ambiguity between tables that exist in multiple catalogs or schemas.

Restricts the views reported to a subset of the available tables. For example, Views=ViewA,ViewB,ViewC.

Remarks

Listing the views from some databases can be expensive. Providing a list of views in the connection string improves the performance of the Sync App.

This property can also be used as an alternative to automatically listing views if you already know which ones you want to work with and there would otherwise be too many to work with.

Specify the views you want in a comma-separated list. Each view should be a valid SQL identifier with any special characters escaped using square brackets, double-quotes or backticks. For example, Views=ViewA,[ViewB/WithSlash],WithCatalog.WithSchema.`ViewC With Space`.

Note that when connecting to a data source with multiple schemas or catalogs, you will need to provide the fully qualified name of the table in this property, as in the last example here, to avoid ambiguity between tables that exist in multiple catalogs or schemas.

Visibility restriction filter which is used to hide schemas from the list of schemas obtained by querying metadata. For example, 'information_schema, pg_catalog'. Schema names are case sensitive.

Remarks

By default, restrictions are not applied.

This section provides a complete list of the Miscellaneous properties you can configure in the connection string for this provider.

---

Property	Description
AllowPreparedStatement	Prepare a query statement before its execution.
BrowsePartitions	By default, the provider exposes the super table and its partitions by metadata. You may hide sub partitions by setting this property to false.
FetchResultSetMetadata	This field sets whether the provider retrieves metadata pertaining to the schema and table name for resultset columns returned by the server.
IncludeTableTypes	If set to true, the provider will query for the types of individual tables and views.
MaxRows	Limits the number of rows returned rows when no aggregation or group by is used in the query. This helps avoid performance issues at design time.
Other	These hidden properties are used only in specific use cases.
QueryPassthrough	This option passes the query to the AlloyDB server as is.
Timeout	The value in seconds until the timeout error is thrown, canceling the operation.
TimeZone	Notifies the server about the timezone on the client with a standard SET TIMEZONE query when a connection is being opened.

Prepare a query statement before its execution.

Remarks

If the AllowPreparedStatement property is set to false, statements are parsed each time they are executed. Setting this property to false can be useful if you are executing many different queries only once.

If you are executing the same query repeatedly, you will generally see better performance by leaving this property set to the default, True. Preparing the query avoids recompiling the same query over and over. However, prepared statements also require the Sync App to keep the connection active and open while the statement is prepared.

By default, the provider exposes the super table and its partitions by metadata. You may hide sub partitions by setting this property to false.

Remarks

This property has an effect on the server with version 10 and later.

This field sets whether the provider retrieves metadata pertaining to the schema and table name for resultset columns returned by the server.

Remarks

By default, the Sync App may request that the server provide detailed information about resultset columns like the table name. It requires issuing additional metadata queries via the Sync App, and it may affect query performance essentially in some scenarios. Consider setting this property to False in order to gain performance in your application if you don't need the respective meta-information for the column.

If set to true, the provider will query for the types of individual tables and views.

Remarks

If set to true, the Sync App will query the AlloyDB server for the types of individual tables and views.

Limits the number of rows returned rows when no aggregation or group by is used in the query. This helps avoid performance issues at design time.

Remarks

Limits the number of rows returned rows when no aggregation or group by is used in the query. This helps avoid performance issues at design time.

These hidden properties are used only in specific use cases.

Remarks

The properties listed below are available for specific use cases. Normal driver use cases and functionality should not require these properties.

Specify multiple properties in a semicolon-separated list.

Integration and Formatting

DefaultColumnSize	Sets the default length of string fields when the data source does not provide column length in the metadata. The default value is 2000.
ConvertDateTimeToGMT	Determines whether to convert date-time values to GMT, instead of the local time of the machine.
RecordToFile=filename	Records the underlying socket data transfer to the specified file.

This option passes the query to the AlloyDB server as is.

Remarks

When this is set, queries are passed through directly to AlloyDB.

The value in seconds until the timeout error is thrown, canceling the operation.

Remarks

If Timeout = 0, operations do not time out. The operations run until they complete successfully or until they encounter an error condition.

If Timeout expires and the operation is not yet complete, the Sync App throws an exception.

Notifies the server about the timezone on the client with a standard SET TIMEZONE query when a connection is being opened.

Remarks

The server stores time with timezone and timestamp with timezone in UTC. When the server is accepting a value without timezone specified explicitly, it uses the TimeZone for the respective adjustment to UTC.

If the TimeZone property is not set, the provider uses the client's local timezone. Setting this property can be useful when you need the server to convert to a specific timezone, which is different from the client's local timezone.