Adding a Connection to Couchbase

To add a connection to Couchbase:

1. In the application console, navigate to the Connections page.
2. At the Add Connections panel, select the icon for the connection you want to add.
3. If the Couchbase icon is not available, click the Add More icon to download and install the Couchbase connector from the CData site.

For required properties, see the Settings tab.

For connection properties that are not typically required, see the Advanced tab.

Connecting to Couchbase

Set Server to the address of the Couchbase server you'd like to connect to. If connecting to a Couchbase Capella instance, include "couchbases://" as a prefix before the server address.

Authenticating to Couchbase

Set User and Password to valid credentials to authenticate to the server.

This section details a selection of advanced features of the Couchbase Sync App.

User Defined Views

The Sync App supports the use of user defined views, virtual tables whose contents are decided by a pre-configured user defined query. These views are useful when you cannot directly control queries being issued to the drivers. For an overview of creating and configuring custom views, see User Defined Views .

SSL Configuration

Use SSL Configuration to adjust how Sync App handles TLS/SSL certificate negotiations. You can choose from various certificate formats;. For further information, see the SSLServerCert property under "Connection String Options" .

Firewall and Proxy

Configure the Sync App for compliance with Firewall and Proxy, including Windows proxies and HTTP proxies. You can also set up tunnel connections.

Query Processing

The Sync App offloads as much of the SELECT statement processing as possible to Couchbase and then processes the rest of the query in memory (client-side).

For further information, see Query Processing.

Logging

For an overview of configuration settings that can be used to refine CData logging, see Logging. Only two connection properties are required for basic logging, but there are numerous features that support more refined logging, which enables you to use the LogModules connection property to specify subsets of information to be logged.

Customizing the SSL Configuration

By default, the Sync App attempts to negotiate TLS with the server. The server certificate is validated against the default system trusted certificate store. You can override how the certificate gets validated using the SSLServerCert connection property.

To specify another certificate, see the SSLServerCert connection property.

Connecting Through a Firewall or Proxy

HTTP Proxies

To authenticate to an HTTP proxy, set the following:

• ProxyServer: the hostname or IP address of the proxy server that you want to route HTTP traffic through.
• ProxyPort: the TCP port that the proxy server is running on.
• ProxyAuthScheme: the authentication method the Sync App uses when authenticating to the proxy server.
• ProxyUser: the username of a user account registered with the proxy server.
• ProxyPassword: the password associated with the ProxyUser.

Other Proxies

Set the following properties:

• To use a proxy-based firewall, set FirewallType, FirewallServer, and FirewallPort.
• To tunnel the connection, set FirewallType to TUNNEL.
• To authenticate, specify FirewallUser and FirewallPassword.
• To authenticate to a SOCKS proxy, additionally set FirewallType to SOCKS5.

The Sync App models Couchbase collections as tables using the Couchbase Java SDK.

Key Features

• The Sync App models Couchbase collections as relational tables.
• Live connectivity to these objects means any changes to your Couchbase data are immediately reflected when using the Sync App.

Catalogs

Each Couchbase bucket within the specified server is modelled as a catalog.

Schemas

Each scope within a given bucket is modelled as a schema.

Tables

Each Couchbase document collection is modelled as a table.

System Tables

System Tables contains information about the objects and resources belonging to your database.

The connection string properties are the various options that can be used to establish a connection. This section provides a complete list of the options you can configure in the connection string for this provider. Click the links for further details.

For more information on establishing a connection, see Establishing a Connection.

Authentication

---

Property	Description
User	Specifies the user ID of the authenticating Couchbase user account.
Password	Specifies the password of the authenticating user account.
Port	The port of the Couchbase server to which you are connecting.
Server	The address of the Couchbase server or servers to which you are connecting.

Connection

---

Property	Description
Bucket	This property restricts the connection to only listing the contents of this bucket as metadata.
Scope	This property restricts the connection to only listing the contents of scopes with this name as metadata.

SSL

---

Property	Description
SSLServerCert	Specifies the certificate to be accepted from the server when connecting using TLS/SSL.

Firewall

---

Property	Description
FirewallType	Specifies the protocol the provider uses to tunnel traffic through a proxy-based firewall.
FirewallServer	Identifies the IP address, DNS name, or host name of a proxy used to traverse a firewall and relay user queries to network resources.
FirewallPort	Specifies the TCP port to be used for a proxy-based firewall.
FirewallUser	Identifies the user ID of the account authenticating to a proxy-based firewall.
FirewallPassword	Specifies the password of the user account authenticating to a proxy-based firewall.

Proxy

---

Property	Description
ProxyAutoDetect	Specifies whether the provider checks your system proxy settings for existing proxy server configurations, rather than using a manually specified proxy server.
ProxyServer	The hostname or IP address of the proxy server that you want to route HTTP traffic through.
ProxyPort	The TCP port on your specified proxy server (set in the ProxyServer connection property) that has been reserved for routing HTTP traffic to and from the client.
ProxyAuthScheme	Specifies the authentication method the provider uses when authenticating to the proxy server specified in the ProxyServer connection property.
ProxyUser	The username of a user account registered with the proxy server specified in the ProxyServer connection property.
ProxyPassword	The password associated with the user specified in the ProxyUser connection property.
ProxySSLType	The SSL type to use when connecting to the proxy server specified in the ProxyServer connection property.
ProxyExceptions	A semicolon separated list of destination hostnames or IPs that are exempt from connecting through the proxy server set in the ProxyServer connection property.

Logging

---

Property	Description
LogModules	Specifies the core modules to include in the log file. Use a semicolon-separated list of module names. By default, all modules are logged.

Schema

---

Property	Description
Location	Specifies the location of a directory containing schema files that define tables, views, and stored procedures. Depending on your service's requirements, this may be expressed as either an absolute path or a relative path.
BrowsableSchemas	Optional setting that restricts the schemas reported to a subset of all available schemas. For example, BrowsableSchemas=SchemaA,SchemaB,SchemaC .
Tables	Optional setting that restricts the tables reported to a subset of all available tables. For example, Tables=TableA,TableB,TableC .
Views	Optional setting that restricts the views reported to a subset of the available tables. For example, Views=ViewA,ViewB,ViewC .
RowScanDepth	The number of rows to scan when dynamically determining columns for the table.
ExposeTTL	Specifies whether document TTL information should be exposed.

Miscellaneous

---

Property	Description
ClusterTimeout	The amount of time, in seconds, that Couchbase cluster operations will execute before throwing a timeout exception. Set to 0 for no timeout.
CreateTableRamQuota	The default RAM quota, in megabytes, to use when inserting buckets via the CREATE TABLE syntax.
GenerateSchemaFiles	Indicates the user preference as to when schemas should be generated and saved.
MaxRows	Specifies the maximum rows returned for queries without aggregation or GROUP BY.
Other	Specifies additional hidden properties for specific use cases. These are not required for typical provider functionality. Use a semicolon-separated list to define multiple properties.
Pagesize	Specifies the maximum number of results to return from Couchbase, per page. This setting overrides the default page size set by the datasource, which is optimized for most use cases.
PseudoColumns	Specifies the pseudocolumns to expose as table columns. Use the format 'TableName=ColumnName;TableName=ColumnName'. The default is an empty string, which disables this property.
Timeout	Specifies the maximum time, in seconds, that the provider waits for a server response before throwing a timeout error. The default is 60 seconds. Set to 0 to disable the timeout.
UpdateNullValues	Determines whether an UPDATE writes NULL values as NULL, or removes them.
UserDefinedViews	Specifies a filepath to a JSON configuration file defining custom views. The provider automatically detects and uses the views specified in this file.

This section provides a complete list of the Authentication properties you can configure in the connection string for this provider.

---

Property	Description
User	Specifies the user ID of the authenticating Couchbase user account.
Password	Specifies the password of the authenticating user account.
Port	The port of the Couchbase server to which you are connecting.
Server	The address of the Couchbase server or servers to which you are connecting.

Specifies the user ID of the authenticating Couchbase user account.

Remarks

The authenticating server requires both User and Password to validate the user's identity.

Specifies the password of the authenticating user account.

Remarks

The authenticating server requires both User and Password to validate the user's identity.

The port of the Couchbase server to which you are connecting.

Remarks

This value should be set to the port number the desired Couchbase service is running on.

The address of the Couchbase server or servers to which you are connecting.

Remarks

This value can be set to a hostname or an IP address, like "couchbase-server.com" or "1.2.3.4". If connecting to a Couchbase Capella instance, prepend "couchbases://" to the URL.

Note that while the Sync App will try to recover the connection as a whole, it may lose individual operations. For example, while a long-running query will fail if the server becomes inaccesssible while that query is running, that query can be retried on the same connection and the Sync App will execute it on the next active server.

This section provides a complete list of the Connection properties you can configure in the connection string for this provider.

---

Property	Description
Bucket	This property restricts the connection to only listing the contents of this bucket as metadata.
Scope	This property restricts the connection to only listing the contents of scopes with this name as metadata.

This property restricts the connection to only listing the contents of this bucket as metadata.

Remarks

Setting this property restricts the returned metadata to only objects contained within this bucket.

This property restricts the connection to only listing the contents of scopes with this name as metadata.

Remarks

Setting this property restricts the returned metadata to only objects contained within scopes with this name. Set in conjunction with Bucket to ensure a specific scope is selected.

This section provides a complete list of the SSL properties you can configure in the connection string for this provider.

---

Property	Description
SSLServerCert	Specifies the certificate to be accepted from the server when connecting using TLS/SSL.

Specifies the certificate to be accepted from the server when connecting using TLS/SSL.

Remarks

If using a TLS/SSL connection, this property can be used to specify the TLS/SSL certificate to be accepted from the server. Any other certificate that is not trusted by the machine is rejected.

This property can take the following forms:

Description	Example
A full PEM Certificate (example shortened for brevity)	-----BEGIN CERTIFICATE----- MIIChTCCAe4CAQAwDQYJKoZIhv......Qw== -----END CERTIFICATE-----
A path to a local file containing the certificate	C:\cert.cer
The public key (example shortened for brevity)	-----BEGIN RSA PUBLIC KEY----- MIGfMA0GCSq......AQAB -----END RSA PUBLIC KEY-----
The MD5 Thumbprint (hex values can also be either space or colon separated)	ecadbdda5a1529c58a1e9e09828d70e4
The SHA1 Thumbprint (hex values can also be either space or colon separated)	34a929226ae0819f2ec14b4a3d904f801cbb150d

If not specified, any certificate trusted by the machine is accepted.

Use '*' to signify to accept all certificates. Note that this is not recommended due to security concerns.

This section provides a complete list of the Firewall properties you can configure in the connection string for this provider.

---

Property	Description
FirewallType	Specifies the protocol the provider uses to tunnel traffic through a proxy-based firewall.
FirewallServer	Identifies the IP address, DNS name, or host name of a proxy used to traverse a firewall and relay user queries to network resources.
FirewallPort	Specifies the TCP port to be used for a proxy-based firewall.
FirewallUser	Identifies the user ID of the account authenticating to a proxy-based firewall.
FirewallPassword	Specifies the password of the user account authenticating to a proxy-based firewall.

Specifies the protocol the provider uses to tunnel traffic through a proxy-based firewall.

Remarks

A proxy-based firewall (or proxy firewall) is a network security device that acts as an intermediary between user requests and the resources they access. The proxy accepts the request of an authenticated user, tunnels through the firewall, and transmits the request to the appropriate server.

Because the proxy evaluates and transfers data backets on behalf of the requesting users, the users never connect directly with the servers, only with the proxy.

Note: By default, the Sync App connects to the system proxy. To disable this behavior and connect to one of the following proxy types, set ProxyAutoDetect to false.

The following table provides port number information for each of the supported protocols.

Protocol	Default Port	Description
TUNNEL	80	The port where the Sync App opens a connection to Couchbase. Traffic flows back and forth via the proxy at this location.
SOCKS4	1080	The port where the Sync App opens a connection to Couchbase. SOCKS 4 then passes theFirewallUser value to the proxy, which determines whether the connection request should be granted.
SOCKS5	1080	The port where the Sync App sends data to Couchbase. If the SOCKS 5 proxy requires authentication, set FirewallUser and FirewallPassword to credentials the proxy recognizes.

To connect to HTTP proxies, use ProxyServer and ProxyPort. To authenticate to HTTP proxies, use ProxyAuthScheme, ProxyUser, and ProxyPassword.

Identifies the IP address, DNS name, or host name of a proxy used to traverse a firewall and relay user queries to network resources.

Remarks

A proxy-based firewall (or proxy firewall) is a network security device that acts as an intermediary between user requests and the resources they access. The proxy accepts the request of an authenticated user, tunnels through the firewall, and transmits the request to the appropriate server.

Because the proxy evaluates and transfers data backets on behalf of the requesting users, the users never connect directly with the servers, only with the proxy.

Specifies the TCP port to be used for a proxy-based firewall.

Remarks

A proxy-based firewall (or proxy firewall) is a network security device that acts as an intermediary between user requests and the resources they access. The proxy accepts the request of an authenticated user, tunnels through the firewall, and transmits the request to the appropriate server.

Because the proxy evaluates and transfers data backets on behalf of the requesting users, the users never connect directly with the servers, only with the proxy.

Identifies the user ID of the account authenticating to a proxy-based firewall.

Remarks

A proxy-based firewall (or proxy firewall) is a network security device that acts as an intermediary between user requests and the resources they access. The proxy accepts the request of an authenticated user, tunnels through the firewall, and transmits the request to the appropriate server.

Because the proxy evaluates and transfers data backets on behalf of the requesting users, the users never connect directly with the servers, only with the proxy.

Specifies the password of the user account authenticating to a proxy-based firewall.

Remarks

A proxy-based firewall (or proxy firewall) is a network security device that acts as an intermediary between user requests and the resources they access. The proxy accepts the request of an authenticated user, tunnels through the firewall, and transmits the request to the appropriate server.

Because the proxy evaluates and transfers data backets on behalf of the requesting users, the users never connect directly with the servers, only with the proxy.

This section provides a complete list of the Proxy properties you can configure in the connection string for this provider.

---

Property	Description
ProxyAutoDetect	Specifies whether the provider checks your system proxy settings for existing proxy server configurations, rather than using a manually specified proxy server.
ProxyServer	The hostname or IP address of the proxy server that you want to route HTTP traffic through.
ProxyPort	The TCP port on your specified proxy server (set in the ProxyServer connection property) that has been reserved for routing HTTP traffic to and from the client.
ProxyAuthScheme	Specifies the authentication method the provider uses when authenticating to the proxy server specified in the ProxyServer connection property.
ProxyUser	The username of a user account registered with the proxy server specified in the ProxyServer connection property.
ProxyPassword	The password associated with the user specified in the ProxyUser connection property.
ProxySSLType	The SSL type to use when connecting to the proxy server specified in the ProxyServer connection property.
ProxyExceptions	A semicolon separated list of destination hostnames or IPs that are exempt from connecting through the proxy server set in the ProxyServer connection property.

Specifies whether the provider checks your system proxy settings for existing proxy server configurations, rather than using a manually specified proxy server.

Remarks

When this connection property is set to True, the Sync App checks your system proxy settings for existing proxy server configurations (no need to manually supply proxy server details).

This connection property takes precedence over other proxy settings. Set to False if you want to manually configure the Sync App to connect to a specific proxy server.

To connect to an HTTP proxy, see ProxyServer. For other proxies, such as SOCKS or tunneling, see FirewallType.

The hostname or IP address of the proxy server that you want to route HTTP traffic through.

Remarks

The Sync App only routes HTTP traffic through the proxy server specified in this connection property when ProxyAutoDetect is set to False. If ProxyAutoDetect is set to True, which is the default, the Sync App instead routes HTTP traffic through the proxy server specified in your system proxy settings.

The TCP port on your specified proxy server (set in the ProxyServer connection property) that has been reserved for routing HTTP traffic to and from the client.

Remarks

The Sync App only routes HTTP traffic through the proxy server port specified in this connection property when ProxyAutoDetect is set to False. If ProxyAutoDetect is set to True, which is the default, the Sync App instead routes HTTP traffic through the proxy server port specified in your system proxy settings.

For other proxy types, see FirewallType.

Specifies the authentication method the provider uses when authenticating to the proxy server specified in the ProxyServer connection property.

Remarks

The authentication type can be one of the following:

• BASIC: The Sync App performs HTTP BASIC authentication.
• DIGEST: The Sync App performs HTTP DIGEST authentication.
• NTLM: The Sync App retrieves an NTLM token.
• NEGOTIATE: The Sync App retrieves an NTLM or Kerberos token based on the applicable protocol for authentication.
• NONE: Set this when the ProxyServer does not require authentication.

For all values other than "NONE", you must also set the ProxyUser and ProxyPassword connection properties.

If you need to use another authentication type, such as SOCKS 5 authentication, see FirewallType.

The username of a user account registered with the proxy server specified in the ProxyServer connection property.

Remarks

The ProxyUser and ProxyPassword connection properties are used to connect and authenticate against the HTTP proxy specified in ProxyServer.

After selecting one of the available authentication types in ProxyAuthScheme, set this property as follows:

ProxyAuthScheme Value	Value to set for ProxyUser
BASIC	The user name of a user registered with the proxy server.
DIGEST	The user name of a user registered with the proxy server.
NEGOTIATE	The username of a Windows user who is a valid user in the domain or trusted domain that the proxy server is part of, in the format user@domain or domain\user.
NTLM	The username of a Windows user who is a valid user in the domain or trusted domain that the proxy server is part of, in the format user@domain or domain\user.
NONE	Do not set the ProxyPassword connection property.

The Sync App only uses this username if ProxyAutoDetect is set to False. If ProxyAutoDetect is set to True, which is the default, the Sync App instead uses the username specified in your system proxy settings.

The password associated with the user specified in the ProxyUser connection property.

Remarks

The ProxyUser and ProxyPassword connection properties are used to connect and authenticate against the HTTP proxy specified in ProxyServer.

After selecting one of the available authentication types in ProxyAuthScheme, set this property as follows:

ProxyAuthScheme Value	Value to set for ProxyPassword
BASIC	The password associated with the proxy server user specified in ProxyUser.
DIGEST	The password associated with the proxy server user specified in ProxyUser.
NEGOTIATE	The password associated with the Windows user account specified in ProxyUser.
NTLM	The password associated with the Windows user account specified in ProxyUser.
NONE	Do not set the ProxyPassword connection property.

For SOCKS 5 authentication or tunneling, see FirewallType.

The Sync App only uses this password if ProxyAutoDetect is set to False. If ProxyAutoDetect is set to True, which is the default, the Sync App instead uses the password specified in your system proxy settings.

The SSL type to use when connecting to the proxy server specified in the ProxyServer connection property.

Remarks

This property determines when to use SSL for the connection to the HTTP proxy specified by ProxyServer. You can set this connection property to the following values :

AUTO	Default setting. If ProxyServer is set to an HTTPS URL, the Sync App uses the TUNNEL option. If ProxyServer is set to an HTTP URL, the component uses the NEVER option.
ALWAYS	The connection is always SSL enabled.
NEVER	The connection is not SSL enabled.
TUNNEL	The connection is made through a tunneling proxy. The proxy server opens a connection to the remote host and traffic flows back and forth through the proxy.

A semicolon separated list of destination hostnames or IPs that are exempt from connecting through the proxy server set in the ProxyServer connection property.

Remarks

The ProxyServer is used for all addresses, except for addresses defined in this property. Use semicolons to separate entries.

Note that the Sync App uses the system proxy settings by default, without further configuration needed. If you want to explicitly configure proxy exceptions for this connection, set ProxyAutoDetect to False.

This section provides a complete list of the Logging properties you can configure in the connection string for this provider.

---

Property	Description
LogModules	Specifies the core modules to include in the log file. Use a semicolon-separated list of module names. By default, all modules are logged.

Specifies the core modules to include in the log file. Use a semicolon-separated list of module names. By default, all modules are logged.

Remarks

This property lets you customize the log file content by specifying the logging modules to include. Logging modules categorize logged information into distinct areas, such as query execution, metadata, or SSL communication. Each module is represented by a four-character code, with some requiring a trailing space for three-letter names.

For example, EXEC logs query execution, and INFO logs general provider messages. To include multiple modules, separate their names with semicolons as follows: INFO;EXEC;SSL.

The Verbosity connection property takes precedence over the module-based filtering specified by this property. Only log entries that meet the verbosity level and belong to the specified modules are logged. Leave this property blank to include all available modules in the log file.

For a complete list of available modules and detailed guidance on configuring logging, refer to the Advanced Logging section in Logging.

This section provides a complete list of the Schema properties you can configure in the connection string for this provider.

---

Property	Description
Location	Specifies the location of a directory containing schema files that define tables, views, and stored procedures. Depending on your service's requirements, this may be expressed as either an absolute path or a relative path.
BrowsableSchemas	Optional setting that restricts the schemas reported to a subset of all available schemas. For example, BrowsableSchemas=SchemaA,SchemaB,SchemaC .
Tables	Optional setting that restricts the tables reported to a subset of all available tables. For example, Tables=TableA,TableB,TableC .
Views	Optional setting that restricts the views reported to a subset of the available tables. For example, Views=ViewA,ViewB,ViewC .
RowScanDepth	The number of rows to scan when dynamically determining columns for the table.
ExposeTTL	Specifies whether document TTL information should be exposed.

Specifies the location of a directory containing schema files that define tables, views, and stored procedures. Depending on your service's requirements, this may be expressed as either an absolute path or a relative path.

Remarks

The Location property is only needed if you want to either customize definitions (for example, change a column name, ignore a column, etc.) or extend the data model with new tables, views, or stored procedures.

If left unspecified, the default location is %APPDATA%\\CData\\couchbasesync Data Provider\\Schema, where %APPDATA% is set to the user's configuration directory:

Platform	%APPDATA%
Windows	The value of the APPDATA environment variable
Linux	~/.config

Optional setting that restricts the schemas reported to a subset of all available schemas. For example, BrowsableSchemas=SchemaA,SchemaB,SchemaC .

Remarks

Listing all available database schemas can take extra time, thus degrading performance. Providing a list of schemas in the connection string saves time and improves performance.

Optional setting that restricts the tables reported to a subset of all available tables. For example, Tables=TableA,TableB,TableC .

Remarks

Listing all available tables from some databases can take extra time, thus degrading performance. Providing a list of tables in the connection string saves time and improves performance.

If there are lots of tables available and you already know which ones you want to work with, you can use this property to restrict your viewing to only those tables. To do this, specify the tables you want in a comma-separated list. Each table should be a valid SQL identifier with any special characters escaped using square brackets, double-quotes or backticks. For example, Tables=TableA,[TableB/WithSlash],WithCatalog.WithSchema.`TableC With Space`.

Note: If you are connecting to a data source with multiple schemas or catalogs, you must specify each table you want to view by its fully qualified name. This avoids ambiguity between tables that may exist in multiple catalogs or schemas.

Optional setting that restricts the views reported to a subset of the available tables. For example, Views=ViewA,ViewB,ViewC .

Remarks

Listing all available views from some databases can take extra time, thus degrading performance. Providing a list of views in the connection string saves time and improves performance.

If there are lots of views available and you already know which ones you want to work with, you can use this property to restrict your viewing to only those views. To do this, specify the views you want in a comma-separated list. Each view should be a valid SQL identifier with any special characters escaped using square brackets, double-quotes or backticks. For example, Views=ViewA,[ViewB/WithSlash],WithCatalog.WithSchema.`ViewC With Space`.

Note: If you are connecting to a data source with multiple schemas or catalogs, you must specify each view you want to examine by its fully qualified name. This avoids ambiguity between views that may exist in multiple catalogs or schemas.

The number of rows to scan when dynamically determining columns for the table.

Remarks

The columns in a table must be determined by scanning table rows. This value determines the maximum number of rows that will be scanned.

Setting a high value may decrease performance. Setting a low value may prevent the data type from being determined properly, especially when there is null data.

The number of rows to scan when dynamically determining columns for the table. Columns are dynamically determined when a schema (RSD) file is not available for the table, such as when using GenerateSchemaFiles.

Higher values will result in a longer request, but will be more accurate.

Setting this value to 0 (zero) will parse the entire couchbasesync document.

Specifies whether document TTL information should be exposed.

Remarks

By default the Sync App does not expose TTL values or consider document TTLs when performing DML operations. Enabling this option exposes TTL values in two ways:

• All tables get a new column called Document.Expiration which contains the TTL value for each document. This column is an integer and returns whatever TTL value is stored in Couchbase directly. This column is read-write on bucket tables and read-only on child tables.
• INSERT and UPDATE will use this field to set TTL values, or to preserve them (for update) when none is provided. Setting the field to either 0 or NULL will remove the TTL from any affected documents.

Note that enabling this features requires that your server be version 6.5.1 or later.

This section provides a complete list of the Miscellaneous properties you can configure in the connection string for this provider.

---

Property	Description
ClusterTimeout	The amount of time, in seconds, that Couchbase cluster operations will execute before throwing a timeout exception. Set to 0 for no timeout.
CreateTableRamQuota	The default RAM quota, in megabytes, to use when inserting buckets via the CREATE TABLE syntax.
GenerateSchemaFiles	Indicates the user preference as to when schemas should be generated and saved.
MaxRows	Specifies the maximum rows returned for queries without aggregation or GROUP BY.
Other	Specifies additional hidden properties for specific use cases. These are not required for typical provider functionality. Use a semicolon-separated list to define multiple properties.
Pagesize	Specifies the maximum number of results to return from Couchbase, per page. This setting overrides the default page size set by the datasource, which is optimized for most use cases.
PseudoColumns	Specifies the pseudocolumns to expose as table columns. Use the format 'TableName=ColumnName;TableName=ColumnName'. The default is an empty string, which disables this property.
Timeout	Specifies the maximum time, in seconds, that the provider waits for a server response before throwing a timeout error. The default is 60 seconds. Set to 0 to disable the timeout.
UpdateNullValues	Determines whether an UPDATE writes NULL values as NULL, or removes them.
UserDefinedViews	Specifies a filepath to a JSON configuration file defining custom views. The provider automatically detects and uses the views specified in this file.

The amount of time, in seconds, that Couchbase cluster operations will execute before throwing a timeout exception. Set to 0 for no timeout.

Remarks

The amount of time, in seconds, that Couchbase cluster operations will execute before throwing a timeout exception. Set to 0 for no timeout.

The default RAM quota, in megabytes, to use when inserting buckets via the CREATE TABLE syntax.

Remarks

The default RAM quota, in megabytes, to use when inserting buckets via the CREATE TABLE syntax.

Indicates the user preference as to when schemas should be generated and saved.

Remarks

This property outputs schemas to .rsd files in the path specified by Location.

Available settings are the following:

• Never: A schema file will never be generated.
• OnUse: A schema file will be generated the first time a table is referenced, provided the schema file for the table does not already exist.
• OnStart: A schema file will be generated at connection time for any tables that do not currently have a schema file.
• OnCreate: A schema file will be generated by when running a CREATE TABLE SQL query.

Note that if you want to regenerate a file, you will first need to delete it.

Generate Schemas with SQL

When you set GenerateSchemaFiles to OnUse, the Sync App generates schemas as you execute SELECT queries. Schemas are generated for each table referenced in the query.

When you set GenerateSchemaFiles to OnCreate, schemas are only generated when a CREATE TABLE query is executed.

Generate Schemas on Connection

Another way to use this property is to obtain schemas for every table in your database when you connect. To do so, set GenerateSchemaFiles to OnStart and connect.

Specifies the maximum rows returned for queries without aggregation or GROUP BY.

Remarks

This property sets an upper limit on the number of rows the Sync App returns for queries that do not include aggregation or GROUP BY clauses. This limit ensures that queries do not return excessively large result sets by default.

When a query includes a LIMIT clause, the value specified in the query takes precedence over the MaxRows setting. If MaxRows is set to "-1", no row limit is enforced unless a LIMIT clause is explicitly included in the query.

This property is useful for optimizing performance and preventing excessive resource consumption when executing queries that could otherwise return very large datasets.

Specifies additional hidden properties for specific use cases. These are not required for typical provider functionality. Use a semicolon-separated list to define multiple properties.

Remarks

This property allows advanced users to configure hidden properties for specialized scenarios. These settings are not required for normal use cases but can address unique requirements or provide additional functionality. Multiple properties can be defined in a semicolon-separated list.

Note: It is strongly recommended to set these properties only when advised by the support team to address specific scenarios or issues.

Specify multiple properties in a semicolon-separated list.

Integration and Formatting

DefaultColumnSize	Sets the default length of string fields when the data source does not provide column length in the metadata. The default value is 2000.
ConvertDateTimeToGMT	Determines whether to convert date-time values to GMT, instead of the local time of the machine.
RecordToFile=filename	Records the underlying socket data transfer to the specified file.

Specifies the maximum number of results to return from Couchbase, per page. This setting overrides the default page size set by the datasource, which is optimized for most use cases.

Remarks

You may want to adjust the default pagesize to optimize results for a particular object or service endpoint you are querying. Be aware that increasing the page size may improve performance, but it could also result in higher memory consumption per page.

Specifies the pseudocolumns to expose as table columns. Use the format 'TableName=ColumnName;TableName=ColumnName'. The default is an empty string, which disables this property.

Remarks

This property allows you to define which pseudocolumns the Sync App exposes as table columns.

To specify individual pseudocolumns, use the following format: "Table1=Column1;Table1=Column2;Table2=Column3"

To include all pseudocolumns for all tables use: "*=*"

Specifies the maximum time, in seconds, that the provider waits for a server response before throwing a timeout error. The default is 60 seconds. Set to 0 to disable the timeout.

Remarks

This property controls the maximum time, in seconds, that the Sync App waits for an operation to complete before canceling it. If the timeout period expires before the operation finishes, the Sync App cancels the operation and throws an exception.

The timeout applies to each individual communication with the server rather than the entire query or operation. For example, a query could continue running beyond 60 seconds if each paging call completes within the timeout limit.

Setting this property to 0 disables the timeout, allowing operations to run indefinitely until they succeed or fail due to other conditions such as server-side timeouts, network interruptions, or resource limits on the server. Use this property cautiously to avoid long-running operations that could degrade performance or result in unresponsive behavior.

Determines whether an UPDATE writes NULL values as NULL, or removes them.

Remarks

By default the Sync App will use NULL values provided in an UPDATE statement and set the field in Couchbase to NULL.

If this option is disabled SQL NULL values in an UPDATE will cause the Sync App to mark the field as MISSING. This removes the field from the object containing it.

This option should be used with care as the Sync App may not detect that the field exists if it is removed from enough documents within a bucket.

Specifies a filepath to a JSON configuration file defining custom views. The provider automatically detects and uses the views specified in this file.

Remarks

This property allows you to define and manage custom views through a JSON-formatted configuration file called UserDefinedViews.json. These views are automatically recognized by the Sync App and enable you to execute custom SQL queries as if they were standard database views. The JSON file defines each view as a root element with a child element called "query", which contains the SQL query for the view. For example:

{
	"MyView": {
		"query": "SELECT * FROM NorthwindOData WHERE MyColumn = 'value'"
	},
	"MyView2": {
		"query": "SELECT * FROM MyTable WHERE Id IN (1,2,3)"
	}
}

You can define multiple views in a single file and specify the filepath using this property. For example: UserDefinedViews=C:\Path\To\UserDefinedViews.json. When you use this property, only the specified views are seen by the Sync App.

Refer to User Defined Views for more information.