ProcessWorkOrdersOperation
The Operations resource manages the operations that the application performs to process the work order.
Columns
| Name | Type | Description |
| ProcessWorkOrdersWorkOrderId [KEY] | Long | ProcessWorkOrdersWorkOrderId of ProcessWorkOrdersOperation |
| OrganizationId | Long | OrganizationId of ProcessWorkOrdersOperation |
| WorkOrderId | Long | Value that uniquely identifies the work order. It's a primary key that the application generates when it creates the work order. |
| WorkOrderNumber | String | WorkOrderNumber of ProcessWorkOrdersOperation |
| WorkOrderOperationId [KEY] | Long | WorkOrderOperationId of ProcessWorkOrdersOperation |
| OperationSequenceNumber | Decimal | Number that indicates the sequence to use when performing the work order operations. |
| OperationName | String | Name of the operation. |
| OperationDescription | String | Description of the operation. |
| OperationType | String | Value that specifies the type of the operation. A list of accepted values is defined in the lookup type ORA_WIS_OPERATION_TYPE. |
| OperationTypeDescription | String | OperationTypeDescription of ProcessWorkOrdersOperation |
| StandardOperationId | Long | Value that uniquely identifies the operation that the work order references. It's a primary key that the application generates when it creates the operation. |
| StandardOperationCode | String | Abbreviation that identifies the operation. |
| StandardOperationName | String | StandardOperationName of ProcessWorkOrdersOperation |
| WorkAreaId | Long | WorkAreaId of ProcessWorkOrdersOperation |
| WorkAreaCode | String | WorkAreaCode of ProcessWorkOrdersOperation |
| WorkAreaName | String | WorkAreaName of ProcessWorkOrdersOperation |
| WorkAreaDescription | String | WorkAreaDescription of ProcessWorkOrdersOperation |
| WorkCenterId | Long | Value that uniquely identifies the work center. It's a primary key that the application generates when it creates the work center. |
| WorkCenterCode | String | Abbreviation that identifies the work center. |
| WorkCenterName | String | WorkCenterName of ProcessWorkOrdersOperation |
| WorkCenterDescription | String | WorkCenterDescription of ProcessWorkOrdersOperation |
| OSPItemId | Long | Value that uniquely identifies the outside-processing item. It's a primary key that the application generates when it creates an item |
| OSPItemNumber | String | Number that identifies outside-processing item. |
| OSPItemDescription | String | OSPItemDescription of ProcessWorkOrdersOperation |
| SupplierId | Long | Value that uniquely identifies the outside-processing supplier. It's a primary key that the application generates when it creates a supplier. |
| SupplierName | String | Name of the outside-processing supplier. |
| SupplierSiteId | Long | Value that uniquely identifies the supplier site. It's a primary key that the application generates when it creates a supplier site. |
| SupplierSiteCode | String | Abbreviation that identifies the supplier site. |
| SupplierSiteDescription | String | SupplierSiteDescription of ProcessWorkOrdersOperation |
| FixedLeadTime | Decimal | Lead time to perform this outside-processing operation, independent of the quantity of the outside-processing item. |
| VariableLeadTime | Decimal | Lead time to perform this outside-processing operation for each unit of the outside-processing item. |
| LeadTimeUOM | String | Abbreviation that identifies the unit of measure that the lead time uses. |
| LeadTimeUnitOfMeasure | String | LeadTimeUnitOfMeasure of ProcessWorkOrdersOperation |
| CountPointOperationFlag | Bool | Contains one of the following values: true or false. If true, then this operation is a count point operation. If an operation is a count point operation, then you have to manually complete it. If false, then this operation is not a count point operation. The last operation in a work order should always be a count point operation. This attribute does not have a default value. |
| AutoTransactFlag | Bool | Contains one of the following values: true or false. If true, the operation is automatically reported and both resources and materials are automatically charged based on the supply type or the charge type setups. If false, then the operation is not automatically reported. The count point attribute and the automatically transact attribute are mutually exclusive. You must make sure that each of these attributes do not both contain true. If count point and automatically transact each contain false, then the operation is optional. You can manually report component usage and resource usage for an optional operation. This attribute does not have a default value. |
| ResequenceFlag | Bool | Contains one of the following values: true or false. If true, then the work order has resequence operations. If false, then the work order doesn't have resequence operations. This attribute is associated with a feature that requires an opt in. |
| ExecutionSequence | Decimal | ExecutionSequence of ProcessWorkOrdersOperation |
| PORequestedQuantity | Decimal | PORequestedQuantity of ProcessWorkOrdersOperation |
| POApprovedQuantity | Decimal | POApprovedQuantity of ProcessWorkOrdersOperation |
| OverReceiptQuantity | Decimal | OverReceiptQuantity of ProcessWorkOrdersOperation |
| InProcessQuantity | Decimal | InProcessQuantity of ProcessWorkOrdersOperation |
| ReceivedQuantity | Decimal | ReceivedQuantity of ProcessWorkOrdersOperation |
| ShippedQuantity | Decimal | ShippedQuantity of ProcessWorkOrdersOperation |
| ReadyQuantity | Decimal | ReadyQuantity of ProcessWorkOrdersOperation |
| CompletedQuantity | Decimal | CompletedQuantity of ProcessWorkOrdersOperation |
| ScrappedQuantity | Decimal | ScrappedQuantity of ProcessWorkOrdersOperation |
| RejectedQuantity | Decimal | RejectedQuantity of ProcessWorkOrdersOperation |
| UnitOfMeasure | String | UnitOfMeasure of ProcessWorkOrdersOperation |
| PlannedStartDate | Datetime | Date and time when the user planned to start the operation. This date is set by the scheduling application. The planned start date must not occur before the start date of the work order or after the finish date of the work order. This attribute is required. |
| PlannedCompletionDate | Datetime | Date and time when the user planned to complete the operation. This date is set by the scheduling application. The planned completion date must not occur before the start date of the work order or after the finish date of the work order. This attribute is required. |
| ActualStartDate | Datetime | ActualStartDate of ProcessWorkOrdersOperation |
| ActualCompletionDate | Datetime | ActualCompletionDate of ProcessWorkOrdersOperation |
| DelayStatus | Int | DelayStatus of ProcessWorkOrdersOperation |
| MaterialsCount | Int | MaterialsCount of ProcessWorkOrdersOperation |
| ResourcesCount | Int | ResourcesCount of ProcessWorkOrdersOperation |
| SerialTrackingFlag | Bool | SerialTrackingFlag of ProcessWorkOrdersOperation |
| ShippingDocumentsFlag | Bool | Contains one of the following values: true or false. If true, then create shipping documents for this outside-processing operation. If false, then do not create these shipping documents. This attribute does not have a default value. |
| CreatedBy | String | CreatedBy of ProcessWorkOrdersOperation |
| CreationDate | Datetime | CreationDate of ProcessWorkOrdersOperation |
| LastUpdateDate | Datetime | LastUpdateDate of ProcessWorkOrdersOperation |
| LastUpdatedBy | String | LastUpdatedBy of ProcessWorkOrdersOperation |
| AdditionalMaterialAtManualIssue | String | Name that identifies a list of values that control whether a production operator can issue more than the required quantity while manually reporting material issues. You can allow issuing more than the required quantity without any hindrance, or prevent the material issue in case of additional material issue. |
| OperationCompletionWithOpenExceptions | String | Name that identifies a list of values that control whether operation completion should be allowed when open exceptions exist for an operation. You can allow operation completion without any hindrance, allow with a warning, or prevent the operation completion. |
| OperationCompletionWithUnderIssue | String | Name that identifies a list of values that control whether operation completion should be allowed when less than the required quantity of material is issued. You can allow operation completion without any hindrance, allow with a warning, or prevent the operation completion. |
| BackToBackFlag | String | BackToBackFlag of ProcessWorkOrdersOperation |
| ContractMfgFlag | String | ContractMfgFlag of ProcessWorkOrdersOperation |
| DueDays | Int | DueDays of ProcessWorkOrdersOperation |
| Finder | String | Finder of ProcessWorkOrdersOperation |
| FirmPlannedFlag | String | FirmPlannedFlag of ProcessWorkOrdersOperation |
| InventoryItemId | Long | InventoryItemId of ProcessWorkOrdersOperation |
| ItemNumber | String | ItemNumber of ProcessWorkOrdersOperation |
| MaterialItemId | Long | MaterialItemId of ProcessWorkOrdersOperation |
| ProductSerialId | Long | ProductSerialId of ProcessWorkOrdersOperation |
| ResourceId | Long | ResourceId of ProcessWorkOrdersOperation |
| SerialNumber | String | SerialNumber of ProcessWorkOrdersOperation |
| SourceHeaderReferenceId | Long | SourceHeaderReferenceId of ProcessWorkOrdersOperation |
| SourceHeaderRefId | Long | SourceHeaderRefId of ProcessWorkOrdersOperation |
| SourceLineReferenceId | Long | SourceLineReferenceId of ProcessWorkOrdersOperation |
| SourceLineRefId | Long | SourceLineRefId of ProcessWorkOrdersOperation |
| SourceSystemId | Long | SourceSystemId of ProcessWorkOrdersOperation |
| Tolerance | Int | Tolerance of ProcessWorkOrdersOperation |
| WoProjectNumber | String | WoProjectNumber of ProcessWorkOrdersOperation |
| WorkOrderStatusId | Long | WorkOrderStatusId of ProcessWorkOrdersOperation |
| WoTaskNumber | String | WoTaskNumber of ProcessWorkOrdersOperation |