Adding a Connection to GoogleCloudStorageDestination

To add a connection to GoogleCloudStorageDestination:

1. In the application console, navigate to the Connections page.
2. At the Add Connections panel, select the icon for the connection you want to add.
3. If the GoogleCloudStorageDestination icon is not available, click the Add More icon to download and install the GoogleCloudStorageDestination connector from the CData site.

For required properties, see the Settings tab.

For connection properties that are not typically required, see the Advanced tab.

OAuth

Use the OAuth authentication standard to connect to GoogleCloudStorageDestination. You can authenticate with a user account or with a service account. A service account is required to grant organization-wide access scopes to the Sync App. The Sync App facilitates these authentication flows as described below.

User Accounts

CData provides an embedded OAuth application that simplifies authentication. You can, however, create a custom OAuth application for authentication. For information about creating a custom application and reasons for doing so, see Creating a Custom OAuth App.

For authentication, the only difference between using the CData-provided (embedded) application and creating your own custom application is that you must set two additional connection properties in the Advanced Tab when using custom OAuth applications.

Before you connect, for custom OAuth applications only, set the following variables:

• OAuthClientId: The client Id assigned when you registered your custom OAuth application.
• OAuthClientSecret: The client secret assigned when you registered your custom OAuth application.

Click Connect to GoogleCloudStorageDestination to open the OAuth endpoint in your default browser. Log in and grant permissions to the application.

The driver then completes the OAuth process as follows:

• Extracts the access token from the callback URL.
• Obtains a new access token when the old one expires.
• Saves OAuth values so that they persist across connections.

Service Accounts

Service accounts have silent authentication, without user authentication in the browser. You can also use a service account to delegate enterprise-wide access scopes to the Sync App.

You need to create an OAuth application in this flow. See Creating a Custom OAuth App to create and authorize an app. You can then connect to GoogleCloudStorageDestination data that the service account has permission to access.

After setting the following connection properties, you are ready to connect:

• OAuthJWTCertType: Set this to "PFXFILE".
• OAuthJWTCert: Set this to the path to the .p12 file you generated.
• OAuthJWTCertPassword: Set this to the password of the .p12 file.
• OAuthJWTCertSubject: Set this to "*" to pick the first certificate in the certificate store.
• OAuthJWTIssuer: In the service accounts section, click Manage Service Accounts and set this field to the email address displayed in the service account Id field.
• OAuthJWTSubject: Set this to your enterprise Id if your subject type is set to "enterprise" or your app user Id if your subject type is set to "user".
• ProjectId: Set this to the Id of the project you want to connect to.

When you connect the Sync App completes the OAuth flow for a service account.

You will also need to specify the following property:

1. Path: The path where the data will be replicated to. For example: /{bucket}/{directory}/. Bucket is required and must be supplied in the path. Directory is not. If the directory within the bucket is not specified, sync will create a folder in the root folder to represent the table being replicated.

The connection string properties are the various options that can be used to establish a connection. This section provides a complete list of the options you can configure in the connection string for this provider. Click the links for further details.

For more information on establishing a connection, see Establishing a Connection.

Authentication

---

Property	Description
AuthScheme	The type of authentication to use when connecting to GoogleCloudStorageDestination.
ProjectId	The Id of the project where your GoogleCloudStorageDestination instance resides.

Connection

---

Property	Description
Bucket	This property specifies the GoogleCloudStorage bucket to replicate to.

OAuth

---

Property	Description
OAuthClientId	Specifies the client Id that was assigned the custom OAuth application was created. (Also known as the consumer key.) This ID registers the custom application with the OAuth authorization server.
OAuthClientSecret	Specifies the client secret that was assigned when the custom OAuth application was created. (Also known as the consumer secret ). This secret registers the custom application with the OAuth authorization server.

JWT OAuth

---

Property	Description
OAuthJWTCert	The JWT Certificate store.
OAuthJWTCertType	The type of key store containing the JWT Certificate.
OAuthJWTCertPassword	The password for the OAuth JWT certificate used to access a certificate store that requires a password. If the certificate store does not require a password, leave this property blank.
OAuthJWTCertSubject	The subject of the OAuth JWT certificate used to locate a matching certificate in the store. Supports partial matches and the wildcard '*' to select the first certificate.
OAuthJWTIssuer	The issuer of the Java Web Token.
OAuthJWTSubject	The user subject for which the application is requesting delegated access.

SSL

---

Property	Description
SSLServerCert	Specifies the certificate to be accepted from the server when connecting using TLS/SSL.

Firewall

---

Property	Description
FirewallType	Specifies the protocol the provider uses to tunnel traffic through a proxy-based firewall.
FirewallServer	Identifies the IP address, DNS name, or host name of a proxy used to traverse a firewall and relay user queries to network resources.
FirewallPort	Specifies the TCP port to be used for a proxy-based firewall.
FirewallUser	Identifies the user ID of the account authenticating to a proxy-based firewall.
FirewallPassword	Specifies the password of the user account authenticating to a proxy-based firewall.

Proxy

---

Property	Description
ProxyAutoDetect	Specifies whether the provider checks your system proxy settings for existing proxy server configurations, rather than using a manually specified proxy server.
ProxyServer	The hostname or IP address of the proxy server that you want to route HTTP traffic through.
ProxyPort	The TCP port on your specified proxy server (set in the ProxyServer connection property) that has been reserved for routing HTTP traffic to and from the client.
ProxyAuthScheme	Specifies the authentication method the provider uses when authenticating to the proxy server specified in the ProxyServer connection property.
ProxyUser	The username of a user account registered with the proxy server specified in the ProxyServer connection property.
ProxyPassword	The password associated with the user specified in the ProxyUser connection property.
ProxySSLType	The SSL type to use when connecting to the proxy server specified in the ProxyServer connection property.
ProxyExceptions	A semicolon separated list of destination hostnames or IPs that are exempt from connecting through the proxy server set in the ProxyServer connection property.

Logging

---

Property	Description
LogModules	Specifies the core modules to include in the log file. Use a semicolon-separated list of module names. By default, all modules are logged.

Schema

---

Property	Description
Location	Specifies the location of a directory containing schema files that define tables, views, and stored procedures. Depending on your service's requirements, this may be expressed as either an absolute path or a relative path.
BrowsableSchemas	Optional setting that restricts the schemas reported to a subset of all available schemas. For example, BrowsableSchemas=SchemaA,SchemaB,SchemaC .
Tables	Optional setting that restricts the tables reported to a subset of all available tables. For example, Tables=TableA,TableB,TableC .
Views	Optional setting that restricts the views reported to a subset of the available tables. For example, Views=ViewA,ViewB,ViewC .

Data Formatting

---

Property	Description
CustomDelimiter	Specifies the character that is used as a delimiter for data in CSV files. The default delimiter is the comma (,).
QuoteEscapeCharacter	Determines the character which will be used to escape quotes.
QuoteCharacter	Determines the character which will be used to quote values in CSV file.
DateTimeFormat	This setting specifies in which format the datetime values will be written to for CSV files.

Miscellaneous

---

Property	Description
Charset	Specifies the session character set for encoding and decoding character data transferred to and from the GoogleCloudStorageDestination file. The default value is UTF-8.
ChunkSize	Specifies the chunk size (in Mb) for multi part upload.
FileFormat	Specifies the file format.
IncludeColumnsHeaders	Whether to add column names in the first line of the replicated CSV file.
InsertMode	Specifies the mode for inserting data into CSV files.
MaxRows	Specifies the maximum rows returned for queries without aggregation or GROUP BY.
MaxThreads	Specifies the number of concurrent requests.
Other	Specifies additional hidden properties for specific use cases. These are not required for typical provider functionality. Use a semicolon-separated list to define multiple properties.
PseudoColumns	Specifies the pseudocolumns to expose as table columns. Use the format 'TableName=ColumnName;TableName=ColumnName'. The default is an empty string, which disables this property.
Timeout	Specifies the maximum time, in seconds, that the provider waits for a server response before throwing a timeout error. The default is 60 seconds. Set to 0 to disable the timeout.
UserDefinedViews	Specifies a filepath to a JSON configuration file defining custom views. The provider automatically detects and uses the views specified in this file.

This section provides a complete list of the Authentication properties you can configure in the connection string for this provider.

---

Property	Description
AuthScheme	The type of authentication to use when connecting to GoogleCloudStorageDestination.
ProjectId	The Id of the project where your GoogleCloudStorageDestination instance resides.

The type of authentication to use when connecting to GoogleCloudStorageDestination.

Remarks

• OAuth: Set this to perform OAuth authentication using a standard user account.
• OAuthJWT: Set this to perform OAuth authentication using an OAuth service account.

The Id of the project where your GoogleCloudStorageDestination instance resides.

Remarks

The Id of the project where your GoogleCloudStorageDestination instance resides. You can find this value by going to Google Cloud Console and clicking the project name at the top left screen. The ProjectId is displayed on the Id column of the matching project.

This section provides a complete list of the Connection properties you can configure in the connection string for this provider.

---

Property	Description
Bucket	This property specifies the GoogleCloudStorage bucket to replicate to.

This property specifies the GoogleCloudStorage bucket to replicate to.

Remarks

Sync will create a folder in the specified bucket to represent the table i.e Replicate [Accounts] -> gs://{bucket}/Accounts

This section provides a complete list of the OAuth properties you can configure in the connection string for this provider.

---

Property	Description
OAuthClientId	Specifies the client Id that was assigned the custom OAuth application was created. (Also known as the consumer key.) This ID registers the custom application with the OAuth authorization server.
OAuthClientSecret	Specifies the client secret that was assigned when the custom OAuth application was created. (Also known as the consumer secret ). This secret registers the custom application with the OAuth authorization server.

Specifies the client Id that was assigned the custom OAuth application was created. (Also known as the consumer key.) This ID registers the custom application with the OAuth authorization server.

Remarks

OAuthClientId is one of a handful of connection parameters that need to be set before users can authenticate via OAuth. For details, see Establishing a Connection.

Specifies the client secret that was assigned when the custom OAuth application was created. (Also known as the consumer secret ). This secret registers the custom application with the OAuth authorization server.

Remarks

OAuthClientSecret is one of a handful of connection parameters that need to be set before users can authenticate via OAuth. For details, see Establishing a Connection.

This section provides a complete list of the JWT OAuth properties you can configure in the connection string for this provider.

---

Property	Description
OAuthJWTCert	The JWT Certificate store.
OAuthJWTCertType	The type of key store containing the JWT Certificate.
OAuthJWTCertPassword	The password for the OAuth JWT certificate used to access a certificate store that requires a password. If the certificate store does not require a password, leave this property blank.
OAuthJWTCertSubject	The subject of the OAuth JWT certificate used to locate a matching certificate in the store. Supports partial matches and the wildcard '*' to select the first certificate.
OAuthJWTIssuer	The issuer of the Java Web Token.
OAuthJWTSubject	The user subject for which the application is requesting delegated access.

The JWT Certificate store.

Remarks

The name of the certificate store for the client certificate.

The OAuthJWTCertType field specifies the type of the certificate store specified by OAuthJWTCert. If the store is password protected, specify the password in OAuthJWTCertPassword.

OAuthJWTCert is used in conjunction with the OAuthJWTCertSubject field in order to specify client certificates. If OAuthJWTCert has a value, and OAuthJWTCertSubject is set, a search for a certificate is initiated. Please refer to the OAuthJWTCertSubject field for details.

Designations of certificate stores are platform-dependent.

The following are designations of the most common User and Machine certificate stores in Windows:

MY	A certificate store holding personal certificates with their associated private keys.
CA	Certifying authority certificates.
ROOT	Root certificates.
SPC	Software publisher certificates.

In Java, the certificate store normally is a file containing certificates and optional private keys.

When the certificate store type is PFXFile, this property must be set to the name of the file. When the type is PFXBlob, the property must be set to the binary contents of a PFX file (i.e. PKCS12 certificate store).

The type of key store containing the JWT Certificate.

Remarks

This property can take one of the following values:

USER	For Windows, this specifies that the certificate store is a certificate store owned by the current user. Note: This store type is not available in Java.
MACHINE	For Windows, this specifies that the certificate store is a machine store. Note: this store type is not available in Java.
PFXFILE	The certificate store is the name of a PFX (PKCS12) file containing certificates.
PFXBLOB	The certificate store is a string (base-64-encoded) representing a certificate store in PFX (PKCS12) format.
JKSFILE	The certificate store is the name of a Java key store (JKS) file containing certificates. Note: this store type is only available in Java.
JKSBLOB	The certificate store is a string (base-64-encoded) representing a certificate store in Java key store (JKS) format. Note: this store type is only available in Java.
PEMKEY_FILE	The certificate store is the name of a PEM-encoded file that contains a private key and an optional certificate.
PEMKEY_BLOB	The certificate store is a string (base64-encoded) that contains a private key and an optional certificate.
PUBLIC_KEY_FILE	The certificate store is the name of a file that contains a PEM- or DER-encoded public key certificate.
PUBLIC_KEY_BLOB	The certificate store is a string (base-64-encoded) that contains a PEM- or DER-encoded public key certificate.
SSHPUBLIC_KEY_FILE	The certificate store is the name of a file that contains an SSH-style public key.
SSHPUBLIC_KEY_BLOB	The certificate store is a string (base-64-encoded) that contains an SSH-style public key.
P7BFILE	The certificate store is the name of a PKCS7 file containing certificates.
PPKFILE	The certificate store is the name of a file that contains a PPK (PuTTY Private Key).
XMLFILE	The certificate store is the name of a file that contains a certificate in XML format.
XMLBLOB	The certificate store is a string that contains a certificate in XML format.
BCFKSFILE	The certificate store is the name of a file that contains an Bouncy Castle keystore.
BCFKSBLOB	The certificate store is a string (base-64-encoded) that contains a Bouncy Castle keystore.
GOOGLEJSON	The certificate store is the name of a JSON file containing the service account information. Only valid when connecting to a Google service.
GOOGLEJSONBLOB	The certificate store is a string that contains the service account JSON. Only valid when connecting to a Google service.

The password for the OAuth JWT certificate used to access a certificate store that requires a password. If the certificate store does not require a password, leave this property blank.

Remarks

This property specifies the password needed to open the certificate store, but only if the store type requires one. To determine if a password is necessary, refer to the documentation or configuration for your specific certificate store.

This is not required when using the GOOGLEJSON OAuthJWTCertType. Google JSON keys are not encrypted.

The subject of the OAuth JWT certificate used to locate a matching certificate in the store. Supports partial matches and the wildcard '*' to select the first certificate.

Remarks

The value of this property is used to locate a matching certificate in the store. The search process works as follows:

• If an exact match for the subject is found, the corresponding certificate is selected.
• If no exact match is found, the store is searched for certificates whose subjects contain the property value.
• If no match is found, no certificate is selected.

You can set the value to '*' to automatically select the first certificate in the store. The certificate subject is a comma-separated list of distinguished name fields and values. For example: CN=www.server.com, OU=test, C=US, [email protected]. Common fields include:

Field	Meaning
CN	Common Name. This is commonly a host name like www.server.com.
O	Organization
OU	Organizational Unit
L	Locality
S	State
C	Country
E	Email Address

If a field value contains a comma, enclose it in quotes. For example: "O=ACME, Inc.".

The issuer of the Java Web Token.

Remarks

The issuer of the Java Web Token. Enter the value of the service account email address.

This is not required when using the GOOGLEJSON OAuthJWTCertType. Google JSON keys contain a copy of the issuer account.

The user subject for which the application is requesting delegated access.

Remarks

The user subject for which the application is requesting delegated access. Enter the email address of the user for which the application is requesting delegated access.

This section provides a complete list of the SSL properties you can configure in the connection string for this provider.

---

Property	Description
SSLServerCert	Specifies the certificate to be accepted from the server when connecting using TLS/SSL.

Specifies the certificate to be accepted from the server when connecting using TLS/SSL.

Remarks

If using a TLS/SSL connection, this property can be used to specify the TLS/SSL certificate to be accepted from the server. Any other certificate that is not trusted by the machine is rejected.

This property can take the following forms:

Description	Example
A full PEM Certificate (example shortened for brevity)	-----BEGIN CERTIFICATE----- MIIChTCCAe4CAQAwDQYJKoZIhv......Qw== -----END CERTIFICATE-----
A path to a local file containing the certificate	C:\cert.cer
The public key (example shortened for brevity)	-----BEGIN RSA PUBLIC KEY----- MIGfMA0GCSq......AQAB -----END RSA PUBLIC KEY-----
The MD5 Thumbprint (hex values can also be either space or colon separated)	ecadbdda5a1529c58a1e9e09828d70e4
The SHA1 Thumbprint (hex values can also be either space or colon separated)	34a929226ae0819f2ec14b4a3d904f801cbb150d

If not specified, any certificate trusted by the machine is accepted.

Use '*' to signify to accept all certificates. Note that this is not recommended due to security concerns.

This section provides a complete list of the Firewall properties you can configure in the connection string for this provider.

---

Property	Description
FirewallType	Specifies the protocol the provider uses to tunnel traffic through a proxy-based firewall.
FirewallServer	Identifies the IP address, DNS name, or host name of a proxy used to traverse a firewall and relay user queries to network resources.
FirewallPort	Specifies the TCP port to be used for a proxy-based firewall.
FirewallUser	Identifies the user ID of the account authenticating to a proxy-based firewall.
FirewallPassword	Specifies the password of the user account authenticating to a proxy-based firewall.

Specifies the protocol the provider uses to tunnel traffic through a proxy-based firewall.

Remarks

A proxy-based firewall (or proxy firewall) is a network security device that acts as an intermediary between user requests and the resources they access. The proxy accepts the request of an authenticated user, tunnels through the firewall, and transmits the request to the appropriate server.

Because the proxy evaluates and transfers data backets on behalf of the requesting users, the users never connect directly with the servers, only with the proxy.

Note: By default, the Sync App connects to the system proxy. To disable this behavior and connect to one of the following proxy types, set ProxyAutoDetect to false.

The following table provides port number information for each of the supported protocols.

Protocol	Default Port	Description
TUNNEL	80	The port where the Sync App opens a connection to GoogleCloudStorageDestination. Traffic flows back and forth via the proxy at this location.
SOCKS4	1080	The port where the Sync App opens a connection to GoogleCloudStorageDestination. SOCKS 4 then passes theFirewallUser value to the proxy, which determines whether the connection request should be granted.
SOCKS5	1080	The port where the Sync App sends data to GoogleCloudStorageDestination. If the SOCKS 5 proxy requires authentication, set FirewallUser and FirewallPassword to credentials the proxy recognizes.

To connect to HTTP proxies, use ProxyServer and ProxyPort. To authenticate to HTTP proxies, use ProxyAuthScheme, ProxyUser, and ProxyPassword.

Identifies the IP address, DNS name, or host name of a proxy used to traverse a firewall and relay user queries to network resources.

Remarks

A proxy-based firewall (or proxy firewall) is a network security device that acts as an intermediary between user requests and the resources they access. The proxy accepts the request of an authenticated user, tunnels through the firewall, and transmits the request to the appropriate server.

Because the proxy evaluates and transfers data backets on behalf of the requesting users, the users never connect directly with the servers, only with the proxy.

Specifies the TCP port to be used for a proxy-based firewall.

Remarks

A proxy-based firewall (or proxy firewall) is a network security device that acts as an intermediary between user requests and the resources they access. The proxy accepts the request of an authenticated user, tunnels through the firewall, and transmits the request to the appropriate server.

Because the proxy evaluates and transfers data backets on behalf of the requesting users, the users never connect directly with the servers, only with the proxy.

Identifies the user ID of the account authenticating to a proxy-based firewall.

Remarks

A proxy-based firewall (or proxy firewall) is a network security device that acts as an intermediary between user requests and the resources they access. The proxy accepts the request of an authenticated user, tunnels through the firewall, and transmits the request to the appropriate server.

Because the proxy evaluates and transfers data backets on behalf of the requesting users, the users never connect directly with the servers, only with the proxy.

Specifies the password of the user account authenticating to a proxy-based firewall.

Remarks

A proxy-based firewall (or proxy firewall) is a network security device that acts as an intermediary between user requests and the resources they access. The proxy accepts the request of an authenticated user, tunnels through the firewall, and transmits the request to the appropriate server.

Because the proxy evaluates and transfers data backets on behalf of the requesting users, the users never connect directly with the servers, only with the proxy.

This section provides a complete list of the Proxy properties you can configure in the connection string for this provider.

---

Property	Description
ProxyAutoDetect	Specifies whether the provider checks your system proxy settings for existing proxy server configurations, rather than using a manually specified proxy server.
ProxyServer	The hostname or IP address of the proxy server that you want to route HTTP traffic through.
ProxyPort	The TCP port on your specified proxy server (set in the ProxyServer connection property) that has been reserved for routing HTTP traffic to and from the client.
ProxyAuthScheme	Specifies the authentication method the provider uses when authenticating to the proxy server specified in the ProxyServer connection property.
ProxyUser	The username of a user account registered with the proxy server specified in the ProxyServer connection property.
ProxyPassword	The password associated with the user specified in the ProxyUser connection property.
ProxySSLType	The SSL type to use when connecting to the proxy server specified in the ProxyServer connection property.
ProxyExceptions	A semicolon separated list of destination hostnames or IPs that are exempt from connecting through the proxy server set in the ProxyServer connection property.

Specifies whether the provider checks your system proxy settings for existing proxy server configurations, rather than using a manually specified proxy server.

Remarks

When this connection property is set to True, the Sync App checks your system proxy settings for existing proxy server configurations (no need to manually supply proxy server details).

This connection property takes precedence over other proxy settings. Set to False if you want to manually configure the Sync App to connect to a specific proxy server.

To connect to an HTTP proxy, see ProxyServer. For other proxies, such as SOCKS or tunneling, see FirewallType.

The hostname or IP address of the proxy server that you want to route HTTP traffic through.

Remarks

The Sync App only routes HTTP traffic through the proxy server specified in this connection property when ProxyAutoDetect is set to False. If ProxyAutoDetect is set to True, which is the default, the Sync App instead routes HTTP traffic through the proxy server specified in your system proxy settings.

The TCP port on your specified proxy server (set in the ProxyServer connection property) that has been reserved for routing HTTP traffic to and from the client.

Remarks

The Sync App only routes HTTP traffic through the proxy server port specified in this connection property when ProxyAutoDetect is set to False. If ProxyAutoDetect is set to True, which is the default, the Sync App instead routes HTTP traffic through the proxy server port specified in your system proxy settings.

For other proxy types, see FirewallType.

Specifies the authentication method the provider uses when authenticating to the proxy server specified in the ProxyServer connection property.

Remarks

The authentication type can be one of the following:

• BASIC: The Sync App performs HTTP BASIC authentication.
• DIGEST: The Sync App performs HTTP DIGEST authentication.
• NTLM: The Sync App retrieves an NTLM token.
• NEGOTIATE: The Sync App retrieves an NTLM or Kerberos token based on the applicable protocol for authentication.
• NONE: Set this when the ProxyServer does not require authentication.

For all values other than "NONE", you must also set the ProxyUser and ProxyPassword connection properties.

If you need to use another authentication type, such as SOCKS 5 authentication, see FirewallType.

The username of a user account registered with the proxy server specified in the ProxyServer connection property.

Remarks

The ProxyUser and ProxyPassword connection properties are used to connect and authenticate against the HTTP proxy specified in ProxyServer.

After selecting one of the available authentication types in ProxyAuthScheme, set this property as follows:

ProxyAuthScheme Value	Value to set for ProxyUser
BASIC	The user name of a user registered with the proxy server.
DIGEST	The user name of a user registered with the proxy server.
NEGOTIATE	The username of a Windows user who is a valid user in the domain or trusted domain that the proxy server is part of, in the format user@domain or domain\user.
NTLM	The username of a Windows user who is a valid user in the domain or trusted domain that the proxy server is part of, in the format user@domain or domain\user.
NONE	Do not set the ProxyPassword connection property.

The Sync App only uses this username if ProxyAutoDetect is set to False. If ProxyAutoDetect is set to True, which is the default, the Sync App instead uses the username specified in your system proxy settings.

The password associated with the user specified in the ProxyUser connection property.

Remarks

The ProxyUser and ProxyPassword connection properties are used to connect and authenticate against the HTTP proxy specified in ProxyServer.

After selecting one of the available authentication types in ProxyAuthScheme, set this property as follows:

ProxyAuthScheme Value	Value to set for ProxyPassword
BASIC	The password associated with the proxy server user specified in ProxyUser.
DIGEST	The password associated with the proxy server user specified in ProxyUser.
NEGOTIATE	The password associated with the Windows user account specified in ProxyUser.
NTLM	The password associated with the Windows user account specified in ProxyUser.
NONE	Do not set the ProxyPassword connection property.

For SOCKS 5 authentication or tunneling, see FirewallType.

The Sync App only uses this password if ProxyAutoDetect is set to False. If ProxyAutoDetect is set to True, which is the default, the Sync App instead uses the password specified in your system proxy settings.

The SSL type to use when connecting to the proxy server specified in the ProxyServer connection property.

Remarks

This property determines when to use SSL for the connection to the HTTP proxy specified by ProxyServer. You can set this connection property to the following values :

AUTO	Default setting. If ProxyServer is set to an HTTPS URL, the Sync App uses the TUNNEL option. If ProxyServer is set to an HTTP URL, the component uses the NEVER option.
ALWAYS	The connection is always SSL enabled.
NEVER	The connection is not SSL enabled.
TUNNEL	The connection is made through a tunneling proxy. The proxy server opens a connection to the remote host and traffic flows back and forth through the proxy.

A semicolon separated list of destination hostnames or IPs that are exempt from connecting through the proxy server set in the ProxyServer connection property.

Remarks

The ProxyServer is used for all addresses, except for addresses defined in this property. Use semicolons to separate entries.

Note that the Sync App uses the system proxy settings by default, without further configuration needed. If you want to explicitly configure proxy exceptions for this connection, set ProxyAutoDetect to False.

This section provides a complete list of the Logging properties you can configure in the connection string for this provider.

---

Property	Description
LogModules	Specifies the core modules to include in the log file. Use a semicolon-separated list of module names. By default, all modules are logged.

Specifies the core modules to include in the log file. Use a semicolon-separated list of module names. By default, all modules are logged.

Remarks

This property lets you customize the log file content by specifying the logging modules to include. Logging modules categorize logged information into distinct areas, such as query execution, metadata, or SSL communication. Each module is represented by a four-character code, with some requiring a trailing space for three-letter names.

For example, EXEC logs query execution, and INFO logs general provider messages. To include multiple modules, separate their names with semicolons as follows: INFO;EXEC;SSL.

The Verbosity connection property takes precedence over the module-based filtering specified by this property. Only log entries that meet the verbosity level and belong to the specified modules are logged. Leave this property blank to include all available modules in the log file.

For a complete list of available modules and detailed guidance on configuring logging, refer to the Advanced Logging section in Logging.

This section provides a complete list of the Schema properties you can configure in the connection string for this provider.

---

Property	Description
Location	Specifies the location of a directory containing schema files that define tables, views, and stored procedures. Depending on your service's requirements, this may be expressed as either an absolute path or a relative path.
BrowsableSchemas	Optional setting that restricts the schemas reported to a subset of all available schemas. For example, BrowsableSchemas=SchemaA,SchemaB,SchemaC .
Tables	Optional setting that restricts the tables reported to a subset of all available tables. For example, Tables=TableA,TableB,TableC .
Views	Optional setting that restricts the views reported to a subset of the available tables. For example, Views=ViewA,ViewB,ViewC .

Specifies the location of a directory containing schema files that define tables, views, and stored procedures. Depending on your service's requirements, this may be expressed as either an absolute path or a relative path.

Remarks

The Location property is only needed if you want to either customize definitions (for example, change a column name, ignore a column, etc.) or extend the data model with new tables, views, or stored procedures.

If left unspecified, the default location is %APPDATA%\\CData\\GOOGLECLOUDSTORAGEDestination Data Provider\\Schema, where %APPDATA% is set to the user's configuration directory:

Platform	%APPDATA%
Windows	The value of the APPDATA environment variable
Linux	~/.config

Optional setting that restricts the schemas reported to a subset of all available schemas. For example, BrowsableSchemas=SchemaA,SchemaB,SchemaC .

Remarks

Listing all available database schemas can take extra time, thus degrading performance. Providing a list of schemas in the connection string saves time and improves performance.

Optional setting that restricts the tables reported to a subset of all available tables. For example, Tables=TableA,TableB,TableC .

Remarks

Listing all available tables from some databases can take extra time, thus degrading performance. Providing a list of tables in the connection string saves time and improves performance.

If there are lots of tables available and you already know which ones you want to work with, you can use this property to restrict your viewing to only those tables. To do this, specify the tables you want in a comma-separated list. Each table should be a valid SQL identifier with any special characters escaped using square brackets, double-quotes or backticks. For example, Tables=TableA,[TableB/WithSlash],WithCatalog.WithSchema.`TableC With Space`.

Note: If you are connecting to a data source with multiple schemas or catalogs, you must specify each table you want to view by its fully qualified name. This avoids ambiguity between tables that may exist in multiple catalogs or schemas.

Optional setting that restricts the views reported to a subset of the available tables. For example, Views=ViewA,ViewB,ViewC .

Remarks

Listing all available views from some databases can take extra time, thus degrading performance. Providing a list of views in the connection string saves time and improves performance.

If there are lots of views available and you already know which ones you want to work with, you can use this property to restrict your viewing to only those views. To do this, specify the views you want in a comma-separated list. Each view should be a valid SQL identifier with any special characters escaped using square brackets, double-quotes or backticks. For example, Views=ViewA,[ViewB/WithSlash],WithCatalog.WithSchema.`ViewC With Space`.

Note: If you are connecting to a data source with multiple schemas or catalogs, you must specify each view you want to examine by its fully qualified name. This avoids ambiguity between views that may exist in multiple catalogs or schemas.

This section provides a complete list of the Data Formatting properties you can configure in the connection string for this provider.

---

Property	Description
CustomDelimiter	Specifies the character that is used as a delimiter for data in CSV files. The default delimiter is the comma (,).
QuoteEscapeCharacter	Determines the character which will be used to escape quotes.
QuoteCharacter	Determines the character which will be used to quote values in CSV file.
DateTimeFormat	This setting specifies in which format the datetime values will be written to for CSV files.

Specifies the character that is used as a delimiter for data in CSV files. The default delimiter is the comma (,).

Remarks

Specifies the character that is used as a delimiter for data in CSV files. The default delimiter is the comma (,).

Determines the character which will be used to escape quotes.

Remarks

Determines the character which will be used to escape quotes.

Determines the character which will be used to quote values in CSV file.

Remarks

Determines the character which will be used to quote values in CSV file.

Note: This property works only for CSV files. Set this property to "NONE" if you want to insert fields in a CSV file without quoting them.

This setting specifies in which format the datetime values will be written to for CSV files.

Remarks

The format should follow a specified pattern:

1. G - Era designator.
2. y - Year.
3. M - Month in year.
4. w - Results in week in year.
5. W - Results in week in month.
6. D - Gives the day count in the year.
7. d - Day of the month.
8. F - Day of the week in month.
9. E - Day name in the week.
10. u - Day number of week where 1 represent Monday, 2 Tuesday and so on.
11. a - AM or PM marker.
12. H - Hour in the day (0-23).
13. h - Hour in am/pm for 12 hour format (1-12).
14. K - Hour in am/pm for 12 hour format (0-11).
15. k - Hour in the day (1-24).
16. m - Minute in the hour.
17. s - Second in the minute.
18. S - Millisecond in the minute.
19. z - Timezone.
20. Z - Timezone offset in hours (RFC pattern).
21. X - Timezone offset in ISO format.

This section provides a complete list of the Miscellaneous properties you can configure in the connection string for this provider.

---

Property	Description
Charset	Specifies the session character set for encoding and decoding character data transferred to and from the GoogleCloudStorageDestination file. The default value is UTF-8.
ChunkSize	Specifies the chunk size (in Mb) for multi part upload.
FileFormat	Specifies the file format.
IncludeColumnsHeaders	Whether to add column names in the first line of the replicated CSV file.
InsertMode	Specifies the mode for inserting data into CSV files.
MaxRows	Specifies the maximum rows returned for queries without aggregation or GROUP BY.
MaxThreads	Specifies the number of concurrent requests.
Other	Specifies additional hidden properties for specific use cases. These are not required for typical provider functionality. Use a semicolon-separated list to define multiple properties.
PseudoColumns	Specifies the pseudocolumns to expose as table columns. Use the format 'TableName=ColumnName;TableName=ColumnName'. The default is an empty string, which disables this property.
Timeout	Specifies the maximum time, in seconds, that the provider waits for a server response before throwing a timeout error. The default is 60 seconds. Set to 0 to disable the timeout.
UserDefinedViews	Specifies a filepath to a JSON configuration file defining custom views. The provider automatically detects and uses the views specified in this file.

Specifies the session character set for encoding and decoding character data transferred to and from the GoogleCloudStorageDestination file. The default value is UTF-8.

Remarks

Specifies the session character set for encoding and decoding character data transferred to and from the GoogleCloudStorageDestination file. The default value is UTF-8.

Specifies the chunk size (in Mb) for multi part upload.

Remarks

Specifies the chunk size (in Mb) for multi part upload. Set the value to -1 if you want to disable the multi part upload.

Specifies the file format.

Remarks

Specifies the file format.

Whether to add column names in the first line of the replicated CSV file.

Remarks

When this property is set to True, the Sync App will add column names to the top for the replicated CSV file.

Specifies the mode for inserting data into CSV files.

Remarks

There are two modes available for inserting data to CSV file:

• FilePerBatch: A new CSV file will be created for every batch. The name of the file will have the format "yyyyMMddhhmmssSSS_batchId" where the date time represents the beginning of the transaction.
• SingleFile: In this mode everything will be inserted in a single CSV file.

Specifies the maximum rows returned for queries without aggregation or GROUP BY.

Remarks

This property sets an upper limit on the number of rows the Sync App returns for queries that do not include aggregation or GROUP BY clauses. This limit ensures that queries do not return excessively large result sets by default.

When a query includes a LIMIT clause, the value specified in the query takes precedence over the MaxRows setting. If MaxRows is set to "-1", no row limit is enforced unless a LIMIT clause is explicitly included in the query.

This property is useful for optimizing performance and preventing excessive resource consumption when executing queries that could otherwise return very large datasets.

Specifies the number of concurrent requests.

Remarks

This property allows you to issue multiple requests simultaneously, thereby improving performance.

Specifies additional hidden properties for specific use cases. These are not required for typical provider functionality. Use a semicolon-separated list to define multiple properties.

Remarks

This property allows advanced users to configure hidden properties for specialized scenarios. These settings are not required for normal use cases but can address unique requirements or provide additional functionality. Multiple properties can be defined in a semicolon-separated list.

Note: It is strongly recommended to set these properties only when advised by the support team to address specific scenarios or issues.

Specify multiple properties in a semicolon-separated list.

Integration and Formatting

DefaultColumnSize	Sets the default length of string fields when the data source does not provide column length in the metadata. The default value is 2000.
ConvertDateTimeToGMT	Determines whether to convert date-time values to GMT, instead of the local time of the machine.
RecordToFile=filename	Records the underlying socket data transfer to the specified file.

Specifies the pseudocolumns to expose as table columns. Use the format 'TableName=ColumnName;TableName=ColumnName'. The default is an empty string, which disables this property.

Remarks

This property allows you to define which pseudocolumns the Sync App exposes as table columns.

To specify individual pseudocolumns, use the following format: "Table1=Column1;Table1=Column2;Table2=Column3"

To include all pseudocolumns for all tables use: "*=*"

Specifies the maximum time, in seconds, that the provider waits for a server response before throwing a timeout error. The default is 60 seconds. Set to 0 to disable the timeout.

Remarks

This property controls the maximum time, in seconds, that the Sync App waits for an operation to complete before canceling it. If the timeout period expires before the operation finishes, the Sync App cancels the operation and throws an exception.

The timeout applies to each individual communication with the server rather than the entire query or operation. For example, a query could continue running beyond 60 seconds if each paging call completes within the timeout limit.

Setting this property to 0 disables the timeout, allowing operations to run indefinitely until they succeed or fail due to other conditions such as server-side timeouts, network interruptions, or resource limits on the server. Use this property cautiously to avoid long-running operations that could degrade performance or result in unresponsive behavior.

Specifies a filepath to a JSON configuration file defining custom views. The provider automatically detects and uses the views specified in this file.

Remarks

This property allows you to define and manage custom views through a JSON-formatted configuration file called UserDefinedViews.json. These views are automatically recognized by the Sync App and enable you to execute custom SQL queries as if they were standard database views. The JSON file defines each view as a root element with a child element called "query", which contains the SQL query for the view. For example:

{
	"MyView": {
		"query": "SELECT * FROM NorthwindOData WHERE MyColumn = 'value'"
	},
	"MyView2": {
		"query": "SELECT * FROM MyTable WHERE Id IN (1,2,3)"
	}
}

You can define multiple views in a single file and specify the filepath using this property. For example: UserDefinedViews=C:\Path\To\UserDefinedViews.json. When you use this property, only the specified views are seen by the Sync App.

Refer to User Defined Views for more information.