Create a connection to EnterpriseDB by navigating to the Connections page in the Sync App application and selecting the corresponding icon in the Add Connections panel. If the EnterpriseDB icon is not available, click the Add More icon to download and install the EnterpriseDB connector from the CData site.

Required properties are listed under the Settings tab. The Advanced tab lists connection properties that are not typically required.

Connecting to EnterpriseDB

The following connection properties are required in order to connect to data.

• User: The user which will be used to authenticate with the EnterpriseDB server.
• Password: The password which will be used to authenticate with the EnterpriseDB server.
• Server: The host name or IP of the server hosting the EnterpriseDB database.
• Port: The port of the server hosting the EnterpriseDB database.

You can also optionally set the following:

• Database: The default database to connect to when connecting to the EnterpriseDB Server. If this is not set, the user's default database will be used.

This section details a selection of advanced features of the EnterpriseDB Sync App.

SSL Configuration

Use SSL Configuration to adjust how Sync App handles TLS/SSL certificate negotiations. You can choose from various certificate formats; see the SSLServerCert property under "Connection String Options" for more information.

Firewall and Proxy

Configure the Sync App for compliance with Firewall and Proxy, including Windows proxies. You can also set up tunnel connections.

Logging

See Logging for an overview of configuration settings that can be used to refine CData logging. For basic logging, you only need to set two connection properties, but there are numerous features that support more refined logging, where you can select subsets of information to be logged using the LogModules connection property.

Customizing the SSL Configuration

By default, the Sync App attempts to negotiate SSL/TLS by checking the server's certificate against the system's trusted certificate store.

To specify another certificate, see the SSLServerCert property for the available formats to do so.

Client SSL Certificates

The EnterpriseDB Sync App also supports setting client certificates. Set the following to connect using a client certificate.

• SSLClientCert: The name of the certificate store for the client certificate.
• SSLClientCertType: The type of key store containing the TLS/SSL client certificate.
• SSLClientCertPassword: The password for the TLS/SSL client certificate.
• SSLClientCertSubject: The subject of the TLS/SSL client certificate.

Connecting Through a Firewall or Proxy

Set the following properties:

• To use a proxy-based firewall, set FirewallType, FirewallServer, and FirewallPort.
• To tunnel the connection, set FirewallType to TUNNEL.
• To authenticate, specify FirewallUser and FirewallPassword.
• To authenticate to a SOCKS proxy, additionally set FirewallType to SOCKS5.

Data Type Mappings

The Sync App maps types from the data source to the corresponding data type available in the schema. The table below documents these mappings.

The connection string properties are the various options that can be used to establish a connection. This section provides a complete list of the options you can configure in the connection string for this provider. Click the links for further details.

Authentication

SSL

Firewall

Logging

Schema

Miscellaneous

This section provides a complete list of the Authentication properties you can configure in the connection string for this provider.

The host name or IP address of the server.

Remarks

The host name or IP of EDB Postgres Advanced Server hosting the Database. If not set, the default value "localhost" is used.

The name of the EnterpriseDB database.

Remarks

The database to connect to when connecting to the EnterpriseDB Server. If a database is not provided, the user's default database will be used.

The EnterpriseDB user account used to authenticate.

Remarks

Together with Password, this field is used to authenticate against the EnterpriseDB server.

The password used to authenticate the user.

Remarks

The User and Password are together used to authenticate with the server.

The port number of the EnterpriseDB server.

Remarks

The port number of the Server hosting the EnterpriseDB Database. If not specified, the default port number 5444 is used.

Whether SSL is enabled.

Remarks

This field sets whether the Sync App will attempt to negotiate TLS/SSL connections to the server. By default, the Sync App checks the server's certificate against the system's trusted certificate store. To specify another certificate, set SSLServerCert.

Visibility restrictions used to filter exposed metadata for tables with privileges granted to them for current user.

Remarks

For example 'SELECT,INSERT' filter is restricting metatdata visibility only for those tables which may be accessed by current user for SELECT and INSERT operations. Supported privilege values are SELECT, INSERT, UPDATE, DELETE, REFERENCES.

By default visibility filtering is not applied. Filtering values are case insensitive.

This section provides a complete list of the SSL properties you can configure in the connection string for this provider.

The TLS/SSL client certificate store for SSL Client Authentication (2-way SSL).

Remarks

The name of the certificate store for the client certificate.

The SSLClientCertType field specifies the type of the certificate store specified by SSLClientCert. If the store is password protected, specify the password in SSLClientCertPassword.

SSLClientCert is used in conjunction with the SSLClientCertSubject field in order to specify client certificates. If SSLClientCert has a value, and SSLClientCertSubject is set, a search for a certificate is initiated. See SSLClientCertSubject for more information.

Designations of certificate stores are platform-dependent.

The following are designations of the most common User and Machine certificate stores in Windows:

In Java, the certificate store normally is a file containing certificates and optional private keys.

When the certificate store type is PFXFile, this property must be set to the name of the file. When the type is PFXBlob, the property must be set to the binary contents of a PFX file (for example, PKCS12 certificate store).

The type of key store containing the TLS/SSL client certificate.

Remarks

This property can take one of the following values:

The password for the TLS/SSL client certificate.

Remarks

If the certificate store is of a type that requires a password, this property is used to specify that password to open the certificate store.

The subject of the TLS/SSL client certificate.

Remarks

When loading a certificate the subject is used to locate the certificate in the store.

If an exact match is not found, the store is searched for subjects containing the value of the property. If a match is still not found, the property is set to an empty string, and no certificate is selected.

The special value "*" picks the first certificate in the certificate store.

The certificate subject is a comma separated list of distinguished name fields and values. For example, "CN=www.server.com, OU=test, C=US, [email protected]". The common fields and their meanings are shown below.

If a field value contains a comma, it must be quoted.

The certificate to be accepted from the server when connecting using TLS/SSL.

Remarks

If using a TLS/SSL connection, this property can be used to specify the TLS/SSL certificate to be accepted from the server. Any other certificate that is not trusted by the machine is rejected.

This property can take the following forms:

If not specified, any certificate trusted by the machine is accepted.

Use '*' to signify to accept all certificates. Note that this is not recommended due to security concerns.

This section provides a complete list of the Firewall properties you can configure in the connection string for this provider.

The protocol used by a proxy-based firewall.

Remarks

This property specifies the protocol that the Sync App will use to tunnel traffic through the FirewallServer proxy.

The name or IP address of a proxy-based firewall.

Remarks

This property specifies the IP address, DNS name, or host name of a proxy allowing traversal of a firewall. The protocol is specified by FirewallType: Use FirewallServer with this property to connect through SOCKS or do tunneling.

The TCP port for a proxy-based firewall.

Remarks

This specifies the TCP port for a proxy allowing traversal of a firewall. Use FirewallServer to specify the name or IP address. Specify the protocol with FirewallType.

The user name to use to authenticate with a proxy-based firewall.

Remarks

The FirewallUser and FirewallPassword properties are used to authenticate against the proxy specified in FirewallServer and FirewallPort, following the authentication method specified in FirewallType.

A password used to authenticate to a proxy-based firewall.

Remarks

This property is passed to the proxy specified by FirewallServer and FirewallPort, following the authentication method specified by FirewallType.

This section provides a complete list of the Logging properties you can configure in the connection string for this provider.

Core modules to be included in the log file.

Remarks

Only the modules specified (separated by ';') will be included in the log file. By default all modules are included.

See the Logging page for an overview.

This section provides a complete list of the Schema properties you can configure in the connection string for this provider.

A path to the directory that contains the schema files defining tables, views, and stored procedures.

Remarks

The path to a directory which contains the schema files for the Sync App (.rsd files for tables and views, .rsb files for stored procedures). The folder location can be a relative path from the location of the executable. The Location property is only needed if you want to customize definitions (for example, change a column name, ignore a column, and so on) or extend the data model with new tables, views, or stored procedures.

If left unspecified, the default location is "%APPDATA%\\CData\\EnterpriseDB Data Provider\\Schema" with %APPDATA% being set to the user's configuration directory:

This property restricts the schemas reported to a subset of the available schemas. For example, BrowsableSchemas=SchemaA,SchemaB,SchemaC.

Remarks

Listing the schemas from databases can be expensive. Providing a list of schemas in the connection string improves the performance.

This property restricts the tables reported to a subset of the available tables. For example, Tables=TableA,TableB,TableC.

Remarks

Listing the tables from some databases can be expensive. Providing a list of tables in the connection string improves the performance of the Sync App.

This property can also be used as an alternative to automatically listing views if you already know which ones you want to work with and there would otherwise be too many to work with.

Specify the tables you want in a comma-separated list. Each table should be a valid SQL identifier with any special characters escaped using square brackets, double-quotes or backticks. For example, Tables=TableA,[TableB/WithSlash],WithCatalog.WithSchema.`TableC With Space`.

Note that when connecting to a data source with multiple schemas or catalogs, you will need to provide the fully qualified name of the table in this property, as in the last example here, to avoid ambiguity between tables that exist in multiple catalogs or schemas.

Restricts the views reported to a subset of the available tables. For example, Views=ViewA,ViewB,ViewC.

Remarks

Listing the views from some databases can be expensive. Providing a list of views in the connection string improves the performance of the Sync App.

This property can also be used as an alternative to automatically listing views if you already know which ones you want to work with and there would otherwise be too many to work with.

Specify the views you want in a comma-separated list. Each view should be a valid SQL identifier with any special characters escaped using square brackets, double-quotes or backticks. For example, Views=ViewA,[ViewB/WithSlash],WithCatalog.WithSchema.`ViewC With Space`.

Note that when connecting to a data source with multiple schemas or catalogs, you will need to provide the fully qualified name of the table in this property, as in the last example here, to avoid ambiguity between tables that exist in multiple catalogs or schemas.

Visibility restriction filter which is used to hide the list of schemas by metadata quering. For example, 'information_schema, pg_catalog'. Schema names are case sensitive.

Remarks

By default restrictions are not applied.

This section provides a complete list of the Miscellaneous properties you can configure in the connection string for this provider.

Prepare a query statement before its execution.

Remarks

If the AllowPreparedStatement property is set to false, statements are parsed each time they are executed. Setting this property to false can be useful if you are executing many different queries only once.

If you are executing the same query repeatedly, you will generally see better performance by leaving this property at the default, true. Preparing the query avoids recompiling the same query over and over. However, prepared statements also require the Sync App to keep the connection active and open while the statement is prepared.

This field sets whether the provider is getting detailed information about resultset columns from the server.

Remarks

By default, the Sync App may request the server to provide detailed information about resultset columns like the table name when the query is succeeding. It requires issuing additional metaquery by Sync App , and it may affect query performance essentially in some scenarios. Consider this property to gain performance of your application if you don't need respective meta-information.

If set to true, the provider will query for the types of individual tables and views.

Remarks

If set to true, the Sync App will query EnterpriseDB server for the types of individual tables and views.

Limits the number of rows returned rows when no aggregation or group by is used in the query. This helps avoid performance issues at design time.

Remarks

Limits the number of rows returned rows when no aggregation or group by is used in the query. This helps avoid performance issues at design time.

These hidden properties are used only in specific use cases.

Remarks

The properties listed below are available for specific use cases. Normal driver use cases and functionality should not require these properties.

Specify multiple properties in a semicolon-separated list.

Integration and Formatting

This option passes the query to the EnterpriseDB server as is.

Remarks

When this is set, queries are passed through directly to EnterpriseDB.

The value in seconds until the timeout error is thrown, canceling the operation.

Remarks

If Timeout = 0, operations do not time out. The operations run until they complete successfully or until they encounter an error condition.

If Timeout expires and the operation is not yet complete, the Sync App throws an exception.

Notifies the server about the time zone on the client with standard SET TIMEZONE query when connection is being opened.

Remarks

Server stores time with time zone and timestamp with time zone in UTC. When the server is accepting a value without timezone specified explicitly it uses TimeZone for respective adjustment to UTC.

If the TimeZone property is not set, provider uses client's local time zone. Setting this property can be useful when you need the server to convert to a specific time zone, which is different from the client's local time.