Microsoft ［ODBC データソースアドミニストレーター］の使用

Microsoft ODBC データソースアドミニストレーターを使ってDSN 設定を編集できます。DSN はインストールプロセス中に作成されることに注意してください。

DSN 設定を編集するには、次の手順を実行してください。

1. スタート -> 検索 を選択し、検索ボックスにODBC データソース と入力します。
2. アプリケーションのビット数（32-bit または64-bit）に対応するODBC アドミニストレーターのバージョンを選択してください。
3. システムDSN タブをクリックします。
4. システムデータソースを選択して構成をクリックします。
5. 接続タブの情報を編集してOK をクリックします。

Note： .NET Framework 4.0 の場合、本製品 はMicrosoft Visual C++ 2015-2022 再頒布可能パッケージを配布します。.NET Framework 3.5 の場合、本製品 はMicrosoft Visual C++ 2008 再頒布可能パッケージを配布します。

レジストリへのアクセスの確保

本製品 は、接続情報をWindows レジストリに保存します。本製品 がレジストリに書き込みできるようにするには、以下のいずれかの操作を実行します。

1. 呼び出すアプリケーションを管理者として実行する。
2. システムDSN 経由ではなく、ユーザーDSN 経由で接続する。

Connecting to Airtable

The 本製品 requests tables and views from Airtable. Specify the following to connect.

• BaseId (optional): You can optionally specify either this property or BaseName to limit the shown tables and views to a particular base. Set this to your base ID.
  • To find this value, navigate to the Airtable API Reference and select a base. In the introduction section of the Airtable documentation for the selected base, note the value specified in The ID of this base is <Id>.
• BaseName (optional): You can optionally specify either this property or BaseId to limit the shown tables and views to a particular base. Set this to the name of the schema, which corresponds to the name of the Base in Airtable, that you want to use.

Authenticating to Airtable

You can authenticate to Airtable using either a Personal Access Token or OAuth PKCE.

Personal Access Token

First, generate a personal access token, if you have not done so already:

1. Log in to your user account.
2. Navigate to the token creation page.
3. Click Create new token.
4. Under Scopes, click Add a scope to add each of the following:
   • data.records:read
   • data.records:write
   • schema.bases:read
5. Under Access, add all the workspaces and bases that you want the token to have access to.
6. Click Create token to generate the token. Copy and save the generated token, as it will only be shown once.

Next, set the following:

• AuthScheme: Set this to PersonalAccessToken.
• OAuthAccessToken: Set this to the value of personal access token that you generated earlier.

OAuth PKCE

Set AuthScheme to OAuthPKCE.

Desktop Applications

CData provides an embedded OAuth application that simplifies OAuth desktop Authentication. Alternatively, you can create a custom OAuth application. See カスタムOAuth アプリの作成 for information about creating custom applications and reasons for doing so.

Get and Refresh the OAuth Access Token

After setting the following, you are ready to connect:

• OAuthClientId (custom applications only): Set this to the client Id assigned when you registered your app.
• OAuthClientSecret (custom applications only): Set this to the client secret assigned when you registered your app. Specifying this value is optional if a value was not generated during the OAuth custom application creation process.
• CallbackURL (custom application only): Set this to the redirect URI defined when you registered your app. For example: http://localhost:3333

When you connect, the 本製品 opens Airtable's OAuth endpoint in your default browser. Log in and grant permissions to the application. The 本製品 refreshes the access token automatically when it expires.

Headless Machines

To configure the driver, use OAuth with a user account on a headless machine. You need to authenticate on another device that has an internet browser.

1. Choose one of two options:
   • Option 1: Obtain the OAuthVerifier and PKCEVerifier values as described in "Obtain and Exchange a Verifier Code" below.
   • Option 2: Install the 本製品 on a machine with an internet browser and transfer the OAuth authentication values after you authenticate through the usual browser-based flow.
2. Then configure the 本製品 to automatically refresh the access token on the headless machine.

Option 1: Obtain and Exchange Verifier Codes

To obtain a verifier code and PKCE verifier, you must authenticate at the OAuth authorization URL.

Follow the steps below to authenticate from the machine with an internet browser and obtain the OAuthVerifier connection property.

1. Choose one of these options:
   • If you are using the Embedded OAuth Application, call the GetOAuthAuthorizationURL stored procedure. Open the URL returned by the stored procedure in a browser.
   • If you are using a custom OAuth application, set the following properties:
     • InitiateOAuth: Set to OFF.
     • OAuthClientId: Set to the client Id assigned when you registered your application.
     • OAuthClientSecret: Set to the client secret assigned when you registered your application. Specifying this value is optional if a value was not generated during the OAuth custom application creation process.
     Then call the GetOAuthAuthorizationURL stored procedure with the appropriate CallbackURL. The stored procedure returns the URL to the OAuth endpoint as well as a PKCEVerifier value. Note the value of the PKCEVerifier for later use. Open the URL returned by the stored procedure in a browser.
2. Log in and grant permissions to the 本製品. You are then redirected to the redirect URI.

There will be a parameter called code appended to the redirect URI. Note the value of this parameter. Later you will set this in the OAuthVerifier connection property.

Next, you need to exchange the OAuth verifier code for OAuth refresh and access tokens.

On the headless machine, set the following connection properties to obtain the OAuth authentication values:

• InitiateOAuth: Set this to REFRESH.
• OAuthVerifier: Set this to the noted verifier code (the value of the code parameter in the redirect URI).
• PKCEVerifier: Set this to the PKCEVerifier value you noted earlier in Step 1.
• OAuthClientId: (custom applications only) Set this to the client Id in your custom OAuth application settings.
• OAuthClientSecret: (custom applications only) Set this to the client secret in the custom OAuth application settings. Specifying this value is optional if a value was not generated during the OAuth custom application creation process.
• OAuthSettingsLocation: Set this to persist the encrypted OAuth authentication values to the specified location.

Test the connection to generate the OAuth settings file, then re-set the following properties to connect:

• InitiateOAuth: Set this to REFRESH.
• OAuthClientId: (custom applications only) Set this to the client Id assigned when you registered your application.
• OAuthClientSecret: (custom applications only) Set this to the client secret assigned when you registered your application. Specifying this value is optional if a value was not generated during the OAuth custom application creation process.
• OAuthSettingsLocation: Set this to the location containing the encrypted OAuth authentication values. Make sure this location gives read and write permissions to the 本製品 to enable the automatic refreshing of the access token.

Option 2: Transfer OAuth Settings

Prior to connecting on a headless machine, you need to install and create a connection with the driver on a device that supports an internet browser. Set the connection properties as described in "Desktop Applications" above.

After completing the instructions in "Desktop Applications", the resulting authentication values are encrypted and written to the location specified by OAuthSettingsLocation. The default filename is OAuthSettings.txt.

Test the connection to generate the OAuth settings file, then copy the OAuth settings file to your headless machine.

On the headless machine, set the following connection properties to connect to data:

• InitiateOAuth: Set this to REFRESH.
• OAuthClientId: (custom applications only) Set this to the client Id assigned when you registered your application.
• OAuthClientSecret: (custom applications only) Set this to the client secret assigned when you registered your application. Specifying this value is optional if a value was not generated during the OAuth custom application creation process.
• OAuthSettingsLocation: Set this to the location of the OAuth settings file you copied from the machine with the browser. Make sure this location gives read and write permissions to the 本製品 to enable the automatic refreshing of the access token.