Adding a Connection to Azure Synapse

To add a connection to Azure Synapse:

1. In the application console, navigate to the Connections page.
2. At the Add Connections panel, select the icon for the connection you want to add.
3. If the Azure Synapse icon is not available, click the Add More icon to download and install the Azure Synapse connector from the CData site.

For required properties, see the Settings tab.

For connection properties that are not typically required, see the Advanced tab.

Connecting to Azure Synapse

In addition to providing authentication (see below), set the following properties to connect to a Azure Synapse database:

• Server: The server running Azure. You can find this by logging into the Azure portal and navigating to Azure Synapse Analytics -> Select your database -> Overview -> Server name.
• Database: The name of the database, as seen in the Azure portal on the Azure Synapse Analytics page.

Authenticating to Azure Synapse

Connect to Azure Synapse using the following properties:

• User: The username provided for authentication with Azure.
• Password: The password associated with the authenticating user.

Azure AD

Azure AD is Microsoft’s multi-tenant, cloud-based directory and identity management service. It is user-based authentication that requires that you set AuthScheme to AzureAD.

Authentication to Azure AD over a Web application always requires the creation of a custom OAuth application .

For details about creating a custom OAuth application, see Creating an Azure AD Application.

Azure Service Principal

Azure Service Principal is role-based application-based authentication. This means that authentication is done per application, rather than per user. All tasks taken on by the application are executed without a default user context, but based on the assigned roles. The application access to the resources is controlled through the assigned roles' permissions.

For information about how to set up Azure Service Principal authentication, see Creating an Azure AD App with Service Principal.

Managed Service Identity (MSI)

If you are running Azure Synapse on an Azure VM and want to automatically obtain Managed Service Identity (MSI) credentials to connect, set AuthScheme to AzureMSI.

User-Managed Identities

To obtain a token for a managed identity, use the OAuthClientId property to specify the managed identity's client_id.

If your VM has multiple user-assigned managed identities, you must also specify OAuthClientId.

1. Client Secret
   • InitiateOAuth: Set this to GETANDREFRESH. You can use InitiateOAuth to avoid repeating the OAuth exchange and manually setting the OAuthAccessToken.
   • AzureTenant: Set this to the tenant you wish to connect to.
   • OAuthGrantType: Set this to CLIENT.
   • OAuthClientId: Set this to the client Id in your app settings.
   • OAuthClientSecret: Set this to the client secret in your app settings.
2. Certificate
   • InitiateOAuth: Set this to GETANDREFRESH. You can use InitiateOAuth to avoid repeating the OAuth exchange and manually setting the OAuthAccessToken.
   • AzureTenant: Set this to the tenant you wish to connect to.
   • OAuthGrantType: Set this to CLIENT.
   • OAuthClientId: Set this to the client Id in your app settings.
   • OAuthJWTCert: Set this to the JWT Certificate store.
   • OAuthJWTCertType: Set this to the type of the certificate store specified by OAuthJWTCert.

This section details a selection of advanced features of the Azure Synapse Sync App.

SSL Configuration

Use SSL Configuration to adjust how Sync App handles TLS/SSL certificate negotiations. You can choose from various certificate formats;. For further information, see the SSLServerCert property under "Connection String Options" .

Firewall and Proxy

Configure the Sync App for compliance with Firewall and Proxy, including Windows proxies. You can also set up tunnel connections.

Logging

For an overview of configuration settings that can be used to refine CData logging, see Logging. Only two connection properties are required for basic logging, but there are numerous features that support more refined logging, which enables you to use the LogModules connection property to specify subsets of information to be logged.

Customizing the SSL Configuration

To enable TLS, set Encrypt to True.

With this configuration, the Sync App attempts to negotiate TLS with the server. The server certificate is validated against the default system trusted certificate store. You can override how the certificate gets validated using the SSLServerCert connection property.

To specify another certificate, see the SSLServerCert connection property.

Client SSL Certificates

The Azure Synapse Sync App also supports setting client certificates. Set the following to connect using a client certificate.

• SSLClientCert: The name of the certificate store for the client certificate.
• SSLClientCertType: The type of key store containing the TLS/SSL client certificate.
• SSLClientCertPassword: The password for the TLS/SSL client certificate.
• SSLClientCertSubject: The subject of the TLS/SSL client certificate.

Connecting Through a Firewall or Proxy

Set the following properties:

• To use a proxy-based firewall, set FirewallType, FirewallServer, and FirewallPort.
• To tunnel the connection, set FirewallType to TUNNEL.
• To authenticate, specify FirewallUser and FirewallPassword.
• To authenticate to a SOCKS proxy, additionally set FirewallType to SOCKS5.

The connection string properties are the various options that can be used to establish a connection. This section provides a complete list of the options you can configure in the connection string for this provider. Click the links for further details.

For more information on establishing a connection, see Establishing a Connection.

Authentication

---

Property	Description
AuthScheme	The scheme used for authentication. Accepted entries are Password, AzureAD, AzureServicePrincipal, AzureServicePrincipalCert, AzureMSI, AzurePassword.
Server	The name of the server running Synapse.
User	Specifies the user ID of the authenticating Azure Synapse user account.
Password	Specifies the password of the authenticating user account.
Port	The port of the Synapse.
Database	The name of the Synapse database.
Encrypt	This field sets whether SSL is enabled and whether the 'Strict' encryption type is used.

Bulk

---

Property	Description
BatchMode	The Batch Mode of Azure Synapse bulkInsert.
StorageAccountLocation	The Storage Account Location for staging your data.
AzureSASToken	The string value of the Azure Blob shared access signature.

Azure Authentication

---

Property	Description
AzureTenant	Identifies the Azure Synapse tenant being used to access data, either by name (for example, contoso.omnicrosoft.com) or ID. (Conditional).
AzureEnvironment	Specifies the Azure network environment to which you will connect. Must be the same network to which your Azure account was added.

OAuth

---

Property	Description
OAuthClientId	Specifies the client Id that was assigned the custom OAuth application was created. (Also known as the consumer key.) This ID registers the custom application with the OAuth authorization server.
OAuthClientSecret	Specifies the client secret that was assigned when the custom OAuth application was created. (Also known as the consumer secret ). This secret registers the custom application with the OAuth authorization server.
OAuthGrantType	Specifies the grant type for the chosen OAuth flow. This value should be the same as the grant_type that was set during OAuth custom application creation.

JWT OAuth

---

Property	Description
OAuthJWTCert	The JWT Certificate store.
OAuthJWTCertType	The type of key store containing the JWT Certificate.
OAuthJWTCertPassword	The password for the OAuth JWT certificate used to access a certificate store that requires a password. If the certificate store does not require a password, leave this property blank.
OAuthJWTCertSubject	The subject of the OAuth JWT certificate used to locate a matching certificate in the store. Supports partial matches and the wildcard '*' to select the first certificate.

SSL

---

Property	Description
SSLClientCert	Specifies the TLS/SSL client certificate store for SSL Client Authentication (2-way SSL). This property works in conjunction with other SSL-related properties to establish a secure connection.
SSLClientCertType	Specifies the type of key store containing the TLS/SSL client certificate for SSL Client Authentication. Choose from a variety of key store formats depending on your platform and certificate source.
SSLClientCertPassword	Specifes the password required to access the TLS/SSL client certificate store. Use this property if the selected certificate store type requires a password for access.
SSLClientCertSubject	Specifes the subject of the TLS/SSL client certificate to locate it in the certificate store. Use a comma-separated list of distinguished name fields, such as CN=www.server.com, C=US. The wildcard * selects the first certificate in the store.
SSLServerCert	Specifies the certificate to be accepted from the server when connecting using TLS/SSL.

Firewall

---

Property	Description
FirewallType	Specifies the protocol the provider uses to tunnel traffic through a proxy-based firewall.
FirewallServer	Identifies the IP address, DNS name, or host name of a proxy used to traverse a firewall and relay user queries to network resources.
FirewallPort	Specifies the TCP port to be used for a proxy-based firewall.
FirewallUser	Identifies the user ID of the account authenticating to a proxy-based firewall.
FirewallPassword	Specifies the password of the user account authenticating to a proxy-based firewall.

Logging

---

Property	Description
LogModules	Specifies the core modules to include in the log file. Use a semicolon-separated list of module names. By default, all modules are logged.

Schema

---

Property	Description
Location	Specifies the location of a directory containing schema files that define tables, views, and stored procedures. Depending on your service's requirements, this may be expressed as either an absolute path or a relative path.
BrowsableSchemas	Optional setting that restricts the schemas reported to a subset of all available schemas. For example, BrowsableSchemas=SchemaA,SchemaB,SchemaC .
Tables	Optional setting that restricts the tables reported to a subset of all available tables. For example, Tables=TableA,TableB,TableC .
Views	Optional setting that restricts the views reported to a subset of the available tables. For example, Views=ViewA,ViewB,ViewC .

Miscellaneous

---

Property	Description
CustomizeDateFormat	Configure the Date format.
ApplicationIntent	Expresses the client application's request to be directed either to a read-write or read-only version of an availability group database.
EnableTransaction	Determines whether transactions are enabled.
MaxRows	Specifies the maximum rows returned for queries without aggregation or GROUP BY.
Other	Specifies additional hidden properties for specific use cases. These are not required for typical provider functionality. Use a semicolon-separated list to define multiple properties.
QueryPassthrough	This option passes the query to the Azure Synapse server as is.
Timeout	Specifies the maximum time, in seconds, that the provider waits for a server response before throwing a timeout error. The default is 60 seconds. Set to 0 to disable the timeout.

This section provides a complete list of the Authentication properties you can configure in the connection string for this provider.

---

Property	Description
AuthScheme	The scheme used for authentication. Accepted entries are Password, AzureAD, AzureServicePrincipal, AzureServicePrincipalCert, AzureMSI, AzurePassword.
Server	The name of the server running Synapse.
User	Specifies the user ID of the authenticating Azure Synapse user account.
Password	Specifies the password of the authenticating user account.
Port	The port of the Synapse.
Database	The name of the Synapse database.
Encrypt	This field sets whether SSL is enabled and whether the 'Strict' encryption type is used.

The scheme used for authentication. Accepted entries are Password, AzureAD, AzureServicePrincipal, AzureServicePrincipalCert, AzureMSI, AzurePassword.

Remarks

• AzureAD: Perform Azure Active Directory (user-based) OAuth authentication.
• AzureMSI: Automatically obtain Azure AD Managed Service Identity credentials when running on an Azure VM.
• AzureServicePrincipal: Authenticate as an Azure Service Principal (role-based, application-based) using a Client Secret.
• AzureServicePrincipalCert: Authenticate as an Azure Service Principal (role-based, application-based) using a Certificate.

For information about creating a custom application to authenticate with Azure AD, see Creating an Azure AD Application.

For information about creating a custom application to authenticate with Azure AD Service Principal, see Creating an Azure AD App with Service Principal.

Together with Password and User, this field is used to authenticate against the server. Password is the default option. Use the following options to select your authentication scheme:

• Password: Set this to use your SQL Server Password.
• AzureAD: Set this to use Azure Active Directory OAuth authentication.
• AzureServicePrincipal: Set this to authenticate as an Azure Service Principal.
• AzureServicePrincipalCert: Set this to authenticate as an Azure Service Principal using a certificate.
• AzureMSI: Set this to use Azure Active Directory Managed Service Identity authentication.
• AzurePassword: Set this to use Azure Active Directory Password authentication.

The name of the server running Synapse.

Remarks

Set this property to the name or network address of the Synapse instance.

Specifies the user ID of the authenticating Azure Synapse user account.

Remarks

The authenticating server requires both User and Password to validate the user's identity.

Specifies the password of the authenticating user account.

Remarks

The authenticating server requires both User and Password to validate the user's identity.

The port of the Synapse.

Remarks

The port of the Server hosting the Synapse Database.

The name of the Synapse database.

Remarks

The name of the Synapse database running on the specified Server.

This field sets whether SSL is enabled and whether the 'Strict' encryption type is used.

Remarks

This field sets whether the Sync App will attempt to negotiate TLS/SSL connections to the server. By default, the Sync App checks the server's certificate against the system's trusted certificate store. To specify another certificate, set SSLServerCert. 'Strict' encryption enforces good security practices and makes SQL Server traffic manageable by standard network appliances.

This section provides a complete list of the Bulk properties you can configure in the connection string for this provider.

---

Property	Description
BatchMode	The Batch Mode of Azure Synapse bulkInsert.
StorageAccountLocation	The Storage Account Location for staging your data.
AzureSASToken	The string value of the Azure Blob shared access signature.

The Batch Mode of Azure Synapse bulkInsert.

Remarks

COPY utilizes an external storage account to load data into and then copy into your Azure Synapse table. You will also need to set the StorageAccountLocation and the AzureSASToken, which only supports INSERT statement. BCP transfers data to Azure Synapse directly with BulkLoadBCP protocol through the TCP communication between client and server, which only supports INSERT statements. STANDARD uses standard INSERT, UPDATE and DELETE statements for batch operations.

The Storage Account Location for staging your data.

Remarks

Specify the file location in AzureBlob(only for COPY mode).

"myaccount" here is your Azure Blob account name, "myblobcontainer" is the Blob container you want to use. For example: https://myaccount.blob.core.windows.net/myblobcontainer/...

The string value of the Azure Blob shared access signature.

Remarks

The string value of the Azure Blob shared access signature.

You can go to "Shared access signature" in "Settings" section for your Azure Blob container through Azure Portal, then click "Generate SAS token and URL" and copy the value from "Blob SAS token" textbox. Please be cautionus to select the proper permission (Create, Write, Delete) in "Permissions" dropdown list and validity of Start and Expiry time before you generate SAS token.

This section provides a complete list of the Azure Authentication properties you can configure in the connection string for this provider.

---

Property	Description
AzureTenant	Identifies the Azure Synapse tenant being used to access data, either by name (for example, contoso.omnicrosoft.com) or ID. (Conditional).
AzureEnvironment	Specifies the Azure network environment to which you will connect. Must be the same network to which your Azure account was added.

Identifies the Azure Synapse tenant being used to access data, either by name (for example, contoso.omnicrosoft.com) or ID. (Conditional).

Remarks

A tenant is a digital representation of your organization, primarily associated with a domain (for example, microsoft.com). The tenant is managed through a Tenant ID (also known as the directory ID), which is specified whenever you assign users permissions to access or manage Azure resources.

To locate the directory ID in the Azure Portal, navigate to Azure Active Directory > Properties.

Specifying AzureTenant is required when AuthScheme = either AzureServicePrincipal or AzureServicePrincipalCert, or if AuthScheme = AzureAD and the user belongs to more than one tenant.

Specifies the Azure network environment to which you will connect. Must be the same network to which your Azure account was added.

Remarks

Required if your Azure account is part of a different network than the Global network, such as China, USGOVT, or USGOVTDOD.

This section provides a complete list of the OAuth properties you can configure in the connection string for this provider.

---

Property	Description
OAuthClientId	Specifies the client Id that was assigned the custom OAuth application was created. (Also known as the consumer key.) This ID registers the custom application with the OAuth authorization server.
OAuthClientSecret	Specifies the client secret that was assigned when the custom OAuth application was created. (Also known as the consumer secret ). This secret registers the custom application with the OAuth authorization server.
OAuthGrantType	Specifies the grant type for the chosen OAuth flow. This value should be the same as the grant_type that was set during OAuth custom application creation.

Specifies the client Id that was assigned the custom OAuth application was created. (Also known as the consumer key.) This ID registers the custom application with the OAuth authorization server.

Remarks

OAuthClientId is one of a handful of connection parameters that need to be set before users can authenticate via OAuth. For details, see Establishing a Connection.

Specifies the client secret that was assigned when the custom OAuth application was created. (Also known as the consumer secret ). This secret registers the custom application with the OAuth authorization server.

Remarks

OAuthClientSecret is one of a handful of connection parameters that need to be set before users can authenticate via OAuth. For details, see Establishing a Connection.

Specifies the grant type for the chosen OAuth flow. This value should be the same as the grant_type that was set during OAuth custom application creation.

Remarks

In most cases, the default grant type should not be modified. For information about the most common OAuth grant types and the trade-offs between them, see https://oauth.net/2/grant-types/.

This section provides a complete list of the JWT OAuth properties you can configure in the connection string for this provider.

---

Property	Description
OAuthJWTCert	The JWT Certificate store.
OAuthJWTCertType	The type of key store containing the JWT Certificate.
OAuthJWTCertPassword	The password for the OAuth JWT certificate used to access a certificate store that requires a password. If the certificate store does not require a password, leave this property blank.
OAuthJWTCertSubject	The subject of the OAuth JWT certificate used to locate a matching certificate in the store. Supports partial matches and the wildcard '*' to select the first certificate.

The JWT Certificate store.

Remarks

The name of the certificate store for the client certificate.

The OAuthJWTCertType field specifies the type of the certificate store specified by OAuthJWTCert. If the store is password protected, specify the password in OAuthJWTCertPassword.

OAuthJWTCert is used in conjunction with the OAuthJWTCertSubject field in order to specify client certificates. If OAuthJWTCert has a value, and OAuthJWTCertSubject is set, a search for a certificate is initiated. Please refer to the OAuthJWTCertSubject field for details.

Designations of certificate stores are platform-dependent.

The following are designations of the most common User and Machine certificate stores in Windows:

MY	A certificate store holding personal certificates with their associated private keys.
CA	Certifying authority certificates.
ROOT	Root certificates.
SPC	Software publisher certificates.

In Java, the certificate store normally is a file containing certificates and optional private keys.

When the certificate store type is PFXFile, this property must be set to the name of the file. When the type is PFXBlob, the property must be set to the binary contents of a PFX file (i.e. PKCS12 certificate store).

The type of key store containing the JWT Certificate.

Remarks

This property can take one of the following values:

USER	For Windows, this specifies that the certificate store is a certificate store owned by the current user. Note: This store type is not available in Java.
MACHINE	For Windows, this specifies that the certificate store is a machine store. Note: this store type is not available in Java.
PFXFILE	The certificate store is the name of a PFX (PKCS12) file containing certificates.
PFXBLOB	The certificate store is a string (base-64-encoded) representing a certificate store in PFX (PKCS12) format.
JKSFILE	The certificate store is the name of a Java key store (JKS) file containing certificates. Note: this store type is only available in Java.
JKSBLOB	The certificate store is a string (base-64-encoded) representing a certificate store in Java key store (JKS) format. Note: this store type is only available in Java.
PEMKEY_FILE	The certificate store is the name of a PEM-encoded file that contains a private key and an optional certificate.
PEMKEY_BLOB	The certificate store is a string (base64-encoded) that contains a private key and an optional certificate.
PUBLIC_KEY_FILE	The certificate store is the name of a file that contains a PEM- or DER-encoded public key certificate.
PUBLIC_KEY_BLOB	The certificate store is a string (base-64-encoded) that contains a PEM- or DER-encoded public key certificate.
SSHPUBLIC_KEY_FILE	The certificate store is the name of a file that contains an SSH-style public key.
SSHPUBLIC_KEY_BLOB	The certificate store is a string (base-64-encoded) that contains an SSH-style public key.
P7BFILE	The certificate store is the name of a PKCS7 file containing certificates.
PPKFILE	The certificate store is the name of a file that contains a PPK (PuTTY Private Key).
XMLFILE	The certificate store is the name of a file that contains a certificate in XML format.
XMLBLOB	The certificate store is a string that contains a certificate in XML format.
BCFKSFILE	The certificate store is the name of a file that contains an Bouncy Castle keystore.
BCFKSBLOB	The certificate store is a string (base-64-encoded) that contains a Bouncy Castle keystore.

The password for the OAuth JWT certificate used to access a certificate store that requires a password. If the certificate store does not require a password, leave this property blank.

Remarks

This property specifies the password needed to open the certificate store, but only if the store type requires one. To determine if a password is necessary, refer to the documentation or configuration for your specific certificate store.

The subject of the OAuth JWT certificate used to locate a matching certificate in the store. Supports partial matches and the wildcard '*' to select the first certificate.

Remarks

The value of this property is used to locate a matching certificate in the store. The search process works as follows:

• If an exact match for the subject is found, the corresponding certificate is selected.
• If no exact match is found, the store is searched for certificates whose subjects contain the property value.
• If no match is found, no certificate is selected.

You can set the value to '*' to automatically select the first certificate in the store. The certificate subject is a comma-separated list of distinguished name fields and values. For example: CN=www.server.com, OU=test, C=US, [email protected]. Common fields include:

Field	Meaning
CN	Common Name. This is commonly a host name like www.server.com.
O	Organization
OU	Organizational Unit
L	Locality
S	State
C	Country
E	Email Address

If a field value contains a comma, enclose it in quotes. For example: "O=ACME, Inc.".

This section provides a complete list of the SSL properties you can configure in the connection string for this provider.

---

Property	Description
SSLClientCert	Specifies the TLS/SSL client certificate store for SSL Client Authentication (2-way SSL). This property works in conjunction with other SSL-related properties to establish a secure connection.
SSLClientCertType	Specifies the type of key store containing the TLS/SSL client certificate for SSL Client Authentication. Choose from a variety of key store formats depending on your platform and certificate source.
SSLClientCertPassword	Specifes the password required to access the TLS/SSL client certificate store. Use this property if the selected certificate store type requires a password for access.
SSLClientCertSubject	Specifes the subject of the TLS/SSL client certificate to locate it in the certificate store. Use a comma-separated list of distinguished name fields, such as CN=www.server.com, C=US. The wildcard * selects the first certificate in the store.
SSLServerCert	Specifies the certificate to be accepted from the server when connecting using TLS/SSL.

Specifies the TLS/SSL client certificate store for SSL Client Authentication (2-way SSL). This property works in conjunction with other SSL-related properties to establish a secure connection.

Remarks

This property specifies the client certificate store for SSL Client Authentication. Use this property alongside SSLClientCertType, which defines the type of the certificate store, and SSLClientCertPassword, which specifies the password for password-protected stores. When SSLClientCert is set and SSLClientCertSubject is configured, the driver searches for a certificate matching the specified subject.

Certificate store designations vary by platform. On Windows, certificate stores are identified by names such as MY (personal certificates), while in Java, the certificate store is typically a file containing certificates and optional private keys.

The following are designations of the most common User and Machine certificate stores in Windows:

MY	A certificate store holding personal certificates with their associated private keys.
CA	Certifying authority certificates.
ROOT	Root certificates.
SPC	Software publisher certificates.

For PFXFile types, set this property to the filename. For PFXBlob types, set this property to the binary contents of the file in PKCS12 format.

Specifies the type of key store containing the TLS/SSL client certificate for SSL Client Authentication. Choose from a variety of key store formats depending on your platform and certificate source.

Remarks

This property determines the format and location of the key store used to provide the client certificate. Supported values include platform-specific and universal key store formats. The available values and their usage are:

USER - default	For Windows, this specifies that the certificate store is a certificate store owned by the current user. Note that this store type is not available in Java.
MACHINE	For Windows, this specifies that the certificate store is a machine store. Note that this store type is not available in Java.
PFXFILE	The certificate store is the name of a PFX (PKCS12) file containing certificates.
PFXBLOB	The certificate store is a string (base-64-encoded) representing a certificate store in PFX (PKCS12) format.
JKSFILE	The certificate store is the name of a Java key store (JKS) file containing certificates. Note that this store type is only available in Java.
JKSBLOB	The certificate store is a string (base-64-encoded) representing a certificate store in JKS format. Note that this store type is only available in Java.
PEMKEY_FILE	The certificate store is the name of a PEM-encoded file that contains a private key and an optional certificate.
PEMKEY_BLOB	The certificate store is a string (base64-encoded) that contains a private key and an optional certificate.
PUBLIC_KEY_FILE	The certificate store is the name of a file that contains a PEM- or DER-encoded public key certificate.
PUBLIC_KEY_BLOB	The certificate store is a string (base-64-encoded) that contains a PEM- or DER-encoded public key certificate.
SSHPUBLIC_KEY_FILE	The certificate store is the name of a file that contains an SSH-style public key.
SSHPUBLIC_KEY_BLOB	The certificate store is a string (base-64-encoded) that contains an SSH-style public key.
P7BFILE	The certificate store is the name of a PKCS7 file containing certificates.
PPKFILE	The certificate store is the name of a file that contains a PuTTY Private Key (PPK).
XMLFILE	The certificate store is the name of a file that contains a certificate in XML format.
XMLBLOB	The certificate store is a string that contains a certificate in XML format.
BCFKSFILE	The certificate store is the name of a file that contains an Bouncy Castle keystore.
BCFKSBLOB	The certificate store is a string (base-64-encoded) that contains a Bouncy Castle keystore.

Specifes the password required to access the TLS/SSL client certificate store. Use this property if the selected certificate store type requires a password for access.

Remarks

This property provides the password needed to open a password-protected certificate store. This property is necessary when using certificate stores that require a password for decryption, as is often recommended for PFX or JKS type stores.

If the certificate store type does not require a password, for example USER or MACHINE on Windows, this property can be left blank. Ensure that the password matches the one associated with the specified certificate store to avoid authentication errors.

Specifes the subject of the TLS/SSL client certificate to locate it in the certificate store. Use a comma-separated list of distinguished name fields, such as CN=www.server.com, C=US. The wildcard * selects the first certificate in the store.

Remarks

This property determines which client certificate to load based on its subject. The Sync App searches for a certificate that exactly matches the specified subject. If no exact match is found, the Sync App looks for certificates containing the value of the subject. If no match is found, no certificate is selected.

The subject should follow the standard format of a comma-separated list of distinguished name fields and values. For example, CN=www.server.com, OU=Test, C=US. Common fields include the following:

Field	Meaning
CN	Common Name. This is commonly a host name like www.server.com.
O	Organization
OU	Organizational Unit
L	Locality
S	State
C	Country
E	Email Address

Note: If any field contains special characters, such as commas, the value must be quoted. For example: CN="Example, Inc.", C=US.

Specifies the certificate to be accepted from the server when connecting using TLS/SSL.

Remarks

If using a TLS/SSL connection, this property can be used to specify the TLS/SSL certificate to be accepted from the server. Any other certificate that is not trusted by the machine is rejected.

This property can take the following forms:

Description	Example
A full PEM Certificate (example shortened for brevity)	-----BEGIN CERTIFICATE----- MIIChTCCAe4CAQAwDQYJKoZIhv......Qw== -----END CERTIFICATE-----
A path to a local file containing the certificate	C:\cert.cer
The public key (example shortened for brevity)	-----BEGIN RSA PUBLIC KEY----- MIGfMA0GCSq......AQAB -----END RSA PUBLIC KEY-----
The MD5 Thumbprint (hex values can also be either space or colon separated)	ecadbdda5a1529c58a1e9e09828d70e4
The SHA1 Thumbprint (hex values can also be either space or colon separated)	34a929226ae0819f2ec14b4a3d904f801cbb150d

If not specified, any certificate trusted by the machine is accepted.

Use '*' to signify to accept all certificates. Note that this is not recommended due to security concerns.

This section provides a complete list of the Firewall properties you can configure in the connection string for this provider.

---

Property	Description
FirewallType	Specifies the protocol the provider uses to tunnel traffic through a proxy-based firewall.
FirewallServer	Identifies the IP address, DNS name, or host name of a proxy used to traverse a firewall and relay user queries to network resources.
FirewallPort	Specifies the TCP port to be used for a proxy-based firewall.
FirewallUser	Identifies the user ID of the account authenticating to a proxy-based firewall.
FirewallPassword	Specifies the password of the user account authenticating to a proxy-based firewall.

Specifies the protocol the provider uses to tunnel traffic through a proxy-based firewall.

Remarks

A proxy-based firewall (or proxy firewall) is a network security device that acts as an intermediary between user requests and the resources they access. The proxy accepts the request of an authenticated user, tunnels through the firewall, and transmits the request to the appropriate server.

Because the proxy evaluates and transfers data backets on behalf of the requesting users, the users never connect directly with the servers, only with the proxy.

The following table provides port number information for each of the supported protocols.

Protocol	Default Port	Description
TUNNEL	80	The port where the Sync App opens a connection to Azure Synapse. Traffic flows back and forth via the proxy at this location.
SOCKS4	1080	The port where the Sync App opens a connection to Azure Synapse. SOCKS 4 then passes theFirewallUser value to the proxy, which determines whether the connection request should be granted.
SOCKS5	1080	The port where the Sync App sends data to Azure Synapse. If the SOCKS 5 proxy requires authentication, set FirewallUser and FirewallPassword to credentials the proxy recognizes.

Identifies the IP address, DNS name, or host name of a proxy used to traverse a firewall and relay user queries to network resources.

Remarks

A proxy-based firewall (or proxy firewall) is a network security device that acts as an intermediary between user requests and the resources they access. The proxy accepts the request of an authenticated user, tunnels through the firewall, and transmits the request to the appropriate server.

Because the proxy evaluates and transfers data backets on behalf of the requesting users, the users never connect directly with the servers, only with the proxy.

Specifies the TCP port to be used for a proxy-based firewall.

Remarks

A proxy-based firewall (or proxy firewall) is a network security device that acts as an intermediary between user requests and the resources they access. The proxy accepts the request of an authenticated user, tunnels through the firewall, and transmits the request to the appropriate server.

Because the proxy evaluates and transfers data backets on behalf of the requesting users, the users never connect directly with the servers, only with the proxy.

Identifies the user ID of the account authenticating to a proxy-based firewall.

Remarks

A proxy-based firewall (or proxy firewall) is a network security device that acts as an intermediary between user requests and the resources they access. The proxy accepts the request of an authenticated user, tunnels through the firewall, and transmits the request to the appropriate server.

Because the proxy evaluates and transfers data backets on behalf of the requesting users, the users never connect directly with the servers, only with the proxy.

Specifies the password of the user account authenticating to a proxy-based firewall.

Remarks

A proxy-based firewall (or proxy firewall) is a network security device that acts as an intermediary between user requests and the resources they access. The proxy accepts the request of an authenticated user, tunnels through the firewall, and transmits the request to the appropriate server.

Because the proxy evaluates and transfers data backets on behalf of the requesting users, the users never connect directly with the servers, only with the proxy.

This section provides a complete list of the Logging properties you can configure in the connection string for this provider.

---

Property	Description
LogModules	Specifies the core modules to include in the log file. Use a semicolon-separated list of module names. By default, all modules are logged.

Specifies the core modules to include in the log file. Use a semicolon-separated list of module names. By default, all modules are logged.

Remarks

This property lets you customize the log file content by specifying the logging modules to include. Logging modules categorize logged information into distinct areas, such as query execution, metadata, or SSL communication. Each module is represented by a four-character code, with some requiring a trailing space for three-letter names.

For example, EXEC logs query execution, and INFO logs general provider messages. To include multiple modules, separate their names with semicolons as follows: INFO;EXEC;SSL.

The Verbosity connection property takes precedence over the module-based filtering specified by this property. Only log entries that meet the verbosity level and belong to the specified modules are logged. Leave this property blank to include all available modules in the log file.

For a complete list of available modules and detailed guidance on configuring logging, refer to the Advanced Logging section in Logging.

This section provides a complete list of the Schema properties you can configure in the connection string for this provider.

---

Property	Description
Location	Specifies the location of a directory containing schema files that define tables, views, and stored procedures. Depending on your service's requirements, this may be expressed as either an absolute path or a relative path.
BrowsableSchemas	Optional setting that restricts the schemas reported to a subset of all available schemas. For example, BrowsableSchemas=SchemaA,SchemaB,SchemaC .
Tables	Optional setting that restricts the tables reported to a subset of all available tables. For example, Tables=TableA,TableB,TableC .
Views	Optional setting that restricts the views reported to a subset of the available tables. For example, Views=ViewA,ViewB,ViewC .

Specifies the location of a directory containing schema files that define tables, views, and stored procedures. Depending on your service's requirements, this may be expressed as either an absolute path or a relative path.

Remarks

The Location property is only needed if you want to either customize definitions (for example, change a column name, ignore a column, etc.) or extend the data model with new tables, views, or stored procedures.

If left unspecified, the default location is %APPDATA%\\CData\\AzureSynapse Data Provider\\Schema, where %APPDATA% is set to the user's configuration directory:

Platform	%APPDATA%
Windows	The value of the APPDATA environment variable
Linux	~/.config

Optional setting that restricts the schemas reported to a subset of all available schemas. For example, BrowsableSchemas=SchemaA,SchemaB,SchemaC .

Remarks

Listing all available database schemas can take extra time, thus degrading performance. Providing a list of schemas in the connection string saves time and improves performance.

Optional setting that restricts the tables reported to a subset of all available tables. For example, Tables=TableA,TableB,TableC .

Remarks

Listing all available tables from some databases can take extra time, thus degrading performance. Providing a list of tables in the connection string saves time and improves performance.

If there are lots of tables available and you already know which ones you want to work with, you can use this property to restrict your viewing to only those tables. To do this, specify the tables you want in a comma-separated list. Each table should be a valid SQL identifier with any special characters escaped using square brackets, double-quotes or backticks. For example, Tables=TableA,[TableB/WithSlash],WithCatalog.WithSchema.`TableC With Space`.

Note: If you are connecting to a data source with multiple schemas or catalogs, you must specify each table you want to view by its fully qualified name. This avoids ambiguity between tables that may exist in multiple catalogs or schemas.

Optional setting that restricts the views reported to a subset of the available tables. For example, Views=ViewA,ViewB,ViewC .

Remarks

Listing all available views from some databases can take extra time, thus degrading performance. Providing a list of views in the connection string saves time and improves performance.

If there are lots of views available and you already know which ones you want to work with, you can use this property to restrict your viewing to only those views. To do this, specify the views you want in a comma-separated list. Each view should be a valid SQL identifier with any special characters escaped using square brackets, double-quotes or backticks. For example, Views=ViewA,[ViewB/WithSlash],WithCatalog.WithSchema.`ViewC With Space`.

Note: If you are connecting to a data source with multiple schemas or catalogs, you must specify each view you want to examine by its fully qualified name. This avoids ambiguity between views that may exist in multiple catalogs or schemas.

This section provides a complete list of the Miscellaneous properties you can configure in the connection string for this provider.

---

Property	Description
CustomizeDateFormat	Configure the Date format.
ApplicationIntent	Expresses the client application's request to be directed either to a read-write or read-only version of an availability group database.
EnableTransaction	Determines whether transactions are enabled.
MaxRows	Specifies the maximum rows returned for queries without aggregation or GROUP BY.
Other	Specifies additional hidden properties for specific use cases. These are not required for typical provider functionality. Use a semicolon-separated list to define multiple properties.
QueryPassthrough	This option passes the query to the Azure Synapse server as is.
Timeout	Specifies the maximum time, in seconds, that the provider waits for a server response before throwing a timeout error. The default is 60 seconds. Set to 0 to disable the timeout.

Configure the Date format.

Remarks

The Date format can be customized by this property.

Expresses the client application's request to be directed either to a read-write or read-only version of an availability group database.

Remarks

To use read-only routing, a client must use an application intent of read-only in the connection string when connecting to the availability group listener. Without the read-only application intent, connections to the availability group listener are directed to the database on the primary replica.

ApplicationIntent allows you to connect to a read-only secondary when connecting to an Availability Group Listener.

Determines whether transactions are enabled.

Remarks

Determines whether transactions are enabled. When set to false, any operation that would involve a transaction is treated as a no-op. Serverless SQL pools do not support transactions, so this property is required to be false when working with tools that utilize transactions. Dedicated SQL pools do support transactions, so this option can be enabled if transaction support is required.

Specifies the maximum rows returned for queries without aggregation or GROUP BY.

Remarks

This property sets an upper limit on the number of rows the Sync App returns for queries that do not include aggregation or GROUP BY clauses. This limit ensures that queries do not return excessively large result sets by default.

When a query includes a LIMIT clause, the value specified in the query takes precedence over the MaxRows setting. If MaxRows is set to "-1", no row limit is enforced unless a LIMIT clause is explicitly included in the query.

This property is useful for optimizing performance and preventing excessive resource consumption when executing queries that could otherwise return very large datasets.

Specifies additional hidden properties for specific use cases. These are not required for typical provider functionality. Use a semicolon-separated list to define multiple properties.

Remarks

This property allows advanced users to configure hidden properties for specialized scenarios. These settings are not required for normal use cases but can address unique requirements or provide additional functionality. Multiple properties can be defined in a semicolon-separated list.

Note: It is strongly recommended to set these properties only when advised by the support team to address specific scenarios or issues.

Specify multiple properties in a semicolon-separated list.

Integration and Formatting

DefaultColumnSize	Sets the default length of string fields when the data source does not provide column length in the metadata. The default value is 2000.
ConvertDateTimeToGMT	Determines whether to convert date-time values to GMT, instead of the local time of the machine.
RecordToFile=filename	Records the underlying socket data transfer to the specified file.

This option passes the query to the Azure Synapse server as is.

Remarks

When this is set, queries are passed through directly to Azure Synapse.

Specifies the maximum time, in seconds, that the provider waits for a server response before throwing a timeout error. The default is 60 seconds. Set to 0 to disable the timeout.

Remarks

This property controls the maximum time, in seconds, that the Sync App waits for an operation to complete before canceling it. If the timeout period expires before the operation finishes, the Sync App cancels the operation and throws an exception.

The timeout applies to each individual communication with the server rather than the entire query or operation. For example, a query could continue running beyond 60 seconds if each paging call completes within the timeout limit.

Setting this property to 0 disables the timeout, allowing operations to run indefinitely until they succeed or fail due to other conditions such as server-side timeouts, network interruptions, or resource limits on the server. Use this property cautiously to avoid long-running operations that could degrade performance or result in unresponsive behavior.