The CData Sync App provides a straightforward way to continuously pipeline your SybaseIQ data to any database, data lake, or data warehouse, making it easily available for Analytics, Reporting, AI, and Machine Learning.
The SybaseIQ connector can be used from the CData Sync application to pull data from SybaseIQ and move it to any of the supported destinations.
The Sync App enables connectivity to SybaseIQ Database (versions 15 and 16 supported) and SAP SQL Anywhere (version 17 supported) through the TDS protocol.
For required properties, see the Settings tab.
For connection properties that are not typically required, see the Advanced tab.
To connect to the SybaseIQ, specify the following connection properties:
Optionally, you can also secure your connections with TLS/SSL by setting UseSSL to true.
Note: It is also possible to connect to an instance of SAP SQL Anywhere with the above Sync App configuration.
SybaseIQ supports several methods for authentication including basic, Kerberos, and, LDAP.
Set the AuthScheme to Basic and set the following connection properties to use SybaseIQ authentication.
To connect with LDAP authentication, you will need to configure SybaseIQ server-side to use the LDAP authentication mechanism.
After configuring SybaseIQ for LDAP, you can connect using the same credentials as basic authentication.
To leverage Kerberos authentication, begin by enabling it via the following connection property:
You can find an example connection string below:
Server=MyServer;Port=MyPort;User=SampleUser;Password=SamplePassword;Database=MyDB;Kerberos=true;KerberosKDC=MyKDC;KerberosRealm=MYREALM.COM;KerberosSPN=server-name
To authenticate to SybaseIQ with Kerberos, set AuthScheme to KERBEROS.
Authenticating to SybaseIQ via Kerberos requires you to define authentication properties and to choose how Kerberos should retrieve authentication tickets.
The Sync App provides three ways to retrieve the required Kerberos ticket, depending on whether or not the KRB5CCNAME and/or KerberosKeytabFile variables exist in your environment.
MIT Kerberos Credential Cache File
This option enables you to use the MIT Kerberos Ticket Manager or kinit command to get tickets. With this option there is no need to set the User or Password connection properties.
This option requires that KRB5CCNAME has been created in your system.
To enable ticket retrieval via MIT Kerberos Credential Cache Files:
If the ticket is successfully obtained, the ticket information appears in Kerberos Ticket Manager and is stored in the credential cache file.
The Sync App uses the cache file to obtain the Kerberos ticket to connect to SybaseIQ.
Note: If you would prefer not to edit KRB5CCNAME, you can use the KerberosTicketCache property to set the file path manually. After this is set, the Sync App uses the specified cache file to obtain the Kerberos ticket to connect to SybaseIQ.
Keytab File
If your environment lacks the KRB5CCNAME environment variable, you can retrieve a Kerberos ticket using a Keytab File.
To use this method, set the User property to the desired username, and set the KerberosKeytabFile property to a file path pointing to the keytab file associated with the user.
User and Password
If your environment lacks the KRB5CCNAME environment variable and the KerberosKeytabFile property has not been set, you can retrieve a ticket using a user and password combination.
To use this method, set the User and Password properties to the user/password combination that you use to authenticate with SybaseIQ.
To enable this kind of cross-realm authentication, set the KerberosRealm and KerberosKDC properties to the values required for user authentication. Also, set the KerberosServiceRealm and KerberosServiceKDC properties to the values required to obtain the service ticket.
This section details a selection of advanced features of the SybaseIQ Sync App.
Use SSL Configuration to adjust how Sync App handles TLS/SSL certificate negotiations. You can choose from various certificate formats;. For further information, see the SSLServerCert property under "Connection String Options" .
Configure the Sync App for compliance with Firewall and Proxy, including Windows proxies. You can also set up tunnel connections.
To enable TLS, set the following:
With this configuration, the Sync App attempts to negotiate TLS with the server. The server certificate is validated against the default system trusted certificate store. You can override how the certificate gets validated using the SSLServerCert connection property.
To specify another certificate, see the SSLServerCert connection property.
Set the following properties:
The connection string properties are the various options that can be used to establish a connection. This section provides a complete list of the options you can configure in the connection string for this provider. Click the links for further details.
For more information on establishing a connection, see Establishing a Connection.
| Property | Description |
| AuthScheme | The scheme used for authentication. Accepted entries are Password, Kerberos. |
| Server | The name of the server running the SybaseIQ or SAP SQL Anywhere Database. |
| Port | The port of the SybaseIQ database. |
| Database | The name of the SybaseIQ or SAP SQL Anywhere database. |
| User | Specifies the user ID of the authenticating SybaseIQ user account. |
| Password | Specifies the password of the authenticating user account. |
| UseSSL | This field sets whether SSL is enabled, it is only available when ConnectionType is 'SQLAnywhere'. |
| Charset | Charset name to communicate with server. |
| ConnectionType | This option specifies whether to connect to a SybaseIQ server or a SQLAnywhere server. |
| Property | Description |
| KerberosKDC | The Kerberos Key Distribution Center (KDC) service used to authenticate the user. |
| KerberosRealm | The Kerberos Realm used to authenticate the user. |
| KerberosSPN | The service principal name (SPN) for the Kerberos Domain Controller. |
| KerberosUser | The principal name for the Kerberos Domain Controller. Used in the format host/user@realm. |
| KerberosKeytabFile | The Keytab file containing your pairs of Kerberos principals and encrypted keys. |
| KerberosServiceRealm | The Kerberos realm of the service. |
| KerberosServiceKDC | The Kerberos KDC of the service. |
| KerberosTicketCache | The full file path to an MIT Kerberos credential cache file. |
| Property | Description |
| SSLServerCert | Specifies the certificate to be accepted from the server when connecting using TLS/SSL. |
| Property | Description |
| FirewallType | Specifies the protocol the provider uses to tunnel traffic through a proxy-based firewall. |
| FirewallServer | Identifies the IP address, DNS name, or host name of a proxy used to traverse a firewall and relay user queries to network resources. |
| FirewallPort | Specifies the TCP port to be used for a proxy-based firewall. |
| FirewallUser | Identifies the user ID of the account authenticating to a proxy-based firewall. |
| FirewallPassword | Specifies the password of the user account authenticating to a proxy-based firewall. |
| Property | Description |
| LogModules | Specifies the core modules to include in the log file. Use a semicolon-separated list of module names. By default, all modules are logged. |
| Property | Description |
| Location | Specifies the location of a directory containing schema files that define tables, views, and stored procedures. Depending on your service's requirements, this may be expressed as either an absolute path or a relative path. |
| BrowsableSchemas | Optional setting that restricts the schemas reported to a subset of all available schemas. For example, BrowsableSchemas=SchemaA,SchemaB,SchemaC . |
| Tables | Optional setting that restricts the tables reported to a subset of all available tables. For example, Tables=TableA,TableB,TableC . |
| Views | Optional setting that restricts the views reported to a subset of the available tables. For example, Views=ViewA,ViewB,ViewC . |
| Property | Description |
| IncludeSystemObjects | Whether to include system objects while retrieving metadata. |
| MaxRows | Specifies the maximum rows returned for queries without aggregation or GROUP BY. |
| MaxTDSPacketSize | The protocol sending and receiving buffer size. For the lower version, it's from 512 to 512. For the newer version, it's from 512 to 2048. |
| Other | Specifies additional hidden properties for specific use cases. These are not required for typical provider functionality. Use a semicolon-separated list to define multiple properties. |
| QueryPassthrough | This option passes the query to the SybaseIQ server as is. |
| Timeout | A timeout for the provider. |
This section provides a complete list of the Authentication properties you can configure in the connection string for this provider.
| Property | Description |
| AuthScheme | The scheme used for authentication. Accepted entries are Password, Kerberos. |
| Server | The name of the server running the SybaseIQ or SAP SQL Anywhere Database. |
| Port | The port of the SybaseIQ database. |
| Database | The name of the SybaseIQ or SAP SQL Anywhere database. |
| User | Specifies the user ID of the authenticating SybaseIQ user account. |
| Password | Specifies the password of the authenticating user account. |
| UseSSL | This field sets whether SSL is enabled, it is only available when ConnectionType is 'SQLAnywhere'. |
| Charset | Charset name to communicate with server. |
| ConnectionType | This option specifies whether to connect to a SybaseIQ server or a SQLAnywhere server. |
The scheme used for authentication. Accepted entries are Password, Kerberos.
Together with Password and User, this field is used to authenticate against the server. Password is the default option. Use the following options to select your authentication scheme:
The name of the server running the SybaseIQ or SAP SQL Anywhere Database.
Set this property to the name or network address of the SybaseIQ or SAP SQL Anywhere database instance.
The name of the SybaseIQ or SAP SQL Anywhere database.
The name of the SybaseIQ or SAP SQL Anywhere database running on the specified Server.
Specifies the user ID of the authenticating SybaseIQ user account.
The authenticating server requires both User and Password to validate the user's identity.
Specifies the password of the authenticating user account.
The authenticating server requires both User and Password to validate the user's identity.
This field sets whether SSL is enabled, it is only available when ConnectionType is 'SQLAnywhere'.
This field sets whether the Sync App will attempt to negotiate TLS/SSL connections to the server. By default, the Sync App checks the server's certificate against the system's trusted certificate store. To specify another certificate, set SSLServerCert.
Charset name to communicate with server.
Charset name to communicate with server.
This option specifies whether to connect to a SybaseIQ server or a SQLAnywhere server.
SSL/TLS encryption can only be enabled when this property is set to 'SQLAnywhere'.
This section provides a complete list of the Kerberos properties you can configure in the connection string for this provider.
| Property | Description |
| KerberosKDC | The Kerberos Key Distribution Center (KDC) service used to authenticate the user. |
| KerberosRealm | The Kerberos Realm used to authenticate the user. |
| KerberosSPN | The service principal name (SPN) for the Kerberos Domain Controller. |
| KerberosUser | The principal name for the Kerberos Domain Controller. Used in the format host/user@realm. |
| KerberosKeytabFile | The Keytab file containing your pairs of Kerberos principals and encrypted keys. |
| KerberosServiceRealm | The Kerberos realm of the service. |
| KerberosServiceKDC | The Kerberos KDC of the service. |
| KerberosTicketCache | The full file path to an MIT Kerberos credential cache file. |
The Kerberos Key Distribution Center (KDC) service used to authenticate the user.
The Kerberos properties are used when using SPNEGO or Windows Authentication. The Sync App will request session tickets and temporary session keys from the Kerberos KDC service. The Kerberos KDC service is conventionally colocated with the domain controller.
If Kerberos KDC is not specified, the Sync App will attempt to detect these properties automatically from the following locations:
The Kerberos Realm used to authenticate the user.
The Kerberos properties are used when using SPNEGO or Windows Authentication. The Kerberos Realm is used to authenticate the user with the Kerberos Key Distribution Service (KDC). The Kerberos Realm can be configured by an administrator to be any string, but conventionally it is based on the domain name.
If Kerberos Realm is not specified, the Sync App will attempt to detect these properties automatically from the following locations:
The service principal name (SPN) for the Kerberos Domain Controller.
If the SPN on the Kerberos Domain Controller is not the same as the URL that you are authenticating to, use this property to set the SPN.
The principal name for the Kerberos Domain Controller. Used in the format host/user@realm.
If the user you are using for the database doesn't match the user that is in the Kerberos database, this should be set to the Kerberos principal name.
The Keytab file containing your pairs of Kerberos principals and encrypted keys.
The Keytab file containing your pairs of Kerberos principals and encrypted keys.
The Kerberos realm of the service.
The KerberosServiceRealm is the specify the service Kerberos realm when using cross-realm Kerberos authentication.
In most cases, a single realm and KDC machine are used to perform the Kerberos authentication and this property is not required.
This property is available for complex setups where a different realm and KDC machine are used to obtain an authentication ticket (AS request) and a service ticket (TGS request).
The Kerberos KDC of the service.
The KerberosServiceKDC is used to specify the service Kerberos KDC when using cross-realm Kerberos authentication.
In most cases, a single realm and KDC machine are used to perform the Kerberos authentication and this property is not required.
This property is available for complex setups where a different realm and KDC machine are used to obtain an authentication ticket (AS request) and a service ticket (TGS request).
The full file path to an MIT Kerberos credential cache file.
This property can be set if you wish to use a credential cache file that was created using the MIT Kerberos Ticket Manager or kinit command.
This section provides a complete list of the SSL properties you can configure in the connection string for this provider.
| Property | Description |
| SSLServerCert | Specifies the certificate to be accepted from the server when connecting using TLS/SSL. |
Specifies the certificate to be accepted from the server when connecting using TLS/SSL.
If using a TLS/SSL connection, this property can be used to specify the TLS/SSL certificate to be accepted from the server. Any other certificate that is not trusted by the machine is rejected.
This property can take the following forms:
| Description | Example |
| A full PEM Certificate (example shortened for brevity) | -----BEGIN CERTIFICATE----- MIIChTCCAe4CAQAwDQYJKoZIhv......Qw== -----END CERTIFICATE----- |
| A path to a local file containing the certificate | C:\cert.cer |
| The public key (example shortened for brevity) | -----BEGIN RSA PUBLIC KEY----- MIGfMA0GCSq......AQAB -----END RSA PUBLIC KEY----- |
| The MD5 Thumbprint (hex values can also be either space or colon separated) | ecadbdda5a1529c58a1e9e09828d70e4 |
| The SHA1 Thumbprint (hex values can also be either space or colon separated) | 34a929226ae0819f2ec14b4a3d904f801cbb150d |
If not specified, any certificate trusted by the machine is accepted.
Use '*' to signify to accept all certificates. Note that this is not recommended due to security concerns.
This section provides a complete list of the Firewall properties you can configure in the connection string for this provider.
| Property | Description |
| FirewallType | Specifies the protocol the provider uses to tunnel traffic through a proxy-based firewall. |
| FirewallServer | Identifies the IP address, DNS name, or host name of a proxy used to traverse a firewall and relay user queries to network resources. |
| FirewallPort | Specifies the TCP port to be used for a proxy-based firewall. |
| FirewallUser | Identifies the user ID of the account authenticating to a proxy-based firewall. |
| FirewallPassword | Specifies the password of the user account authenticating to a proxy-based firewall. |
Specifies the protocol the provider uses to tunnel traffic through a proxy-based firewall.
A proxy-based firewall (or proxy firewall) is a network security device that acts as an intermediary between user requests and the resources they access. The proxy accepts the request of an authenticated user, tunnels through the firewall, and transmits the request to the appropriate server.
Because the proxy evaluates and transfers data backets on behalf of the requesting users, the users never connect directly with the servers, only with the proxy.
The following table provides port number information for each of the supported protocols.
| Protocol | Default Port | Description |
| TUNNEL | 80 | The port where the Sync App opens a connection to SybaseIQ. Traffic flows back and forth via the proxy at this location. |
| SOCKS4 | 1080 | The port where the Sync App opens a connection to SybaseIQ. SOCKS 4 then passes theFirewallUser value to the proxy, which determines whether the connection request should be granted. |
| SOCKS5 | 1080 | The port where the Sync App sends data to SybaseIQ. If the SOCKS 5 proxy requires authentication, set FirewallUser and FirewallPassword to credentials the proxy recognizes. |
Identifies the IP address, DNS name, or host name of a proxy used to traverse a firewall and relay user queries to network resources.
A proxy-based firewall (or proxy firewall) is a network security device that acts as an intermediary between user requests and the resources they access. The proxy accepts the request of an authenticated user, tunnels through the firewall, and transmits the request to the appropriate server.
Because the proxy evaluates and transfers data backets on behalf of the requesting users, the users never connect directly with the servers, only with the proxy.
Specifies the TCP port to be used for a proxy-based firewall.
A proxy-based firewall (or proxy firewall) is a network security device that acts as an intermediary between user requests and the resources they access. The proxy accepts the request of an authenticated user, tunnels through the firewall, and transmits the request to the appropriate server.
Because the proxy evaluates and transfers data backets on behalf of the requesting users, the users never connect directly with the servers, only with the proxy.
Identifies the user ID of the account authenticating to a proxy-based firewall.
A proxy-based firewall (or proxy firewall) is a network security device that acts as an intermediary between user requests and the resources they access. The proxy accepts the request of an authenticated user, tunnels through the firewall, and transmits the request to the appropriate server.
Because the proxy evaluates and transfers data backets on behalf of the requesting users, the users never connect directly with the servers, only with the proxy.
Specifies the password of the user account authenticating to a proxy-based firewall.
A proxy-based firewall (or proxy firewall) is a network security device that acts as an intermediary between user requests and the resources they access. The proxy accepts the request of an authenticated user, tunnels through the firewall, and transmits the request to the appropriate server.
Because the proxy evaluates and transfers data backets on behalf of the requesting users, the users never connect directly with the servers, only with the proxy.
This section provides a complete list of the Logging properties you can configure in the connection string for this provider.
| Property | Description |
| LogModules | Specifies the core modules to include in the log file. Use a semicolon-separated list of module names. By default, all modules are logged. |
Specifies the core modules to include in the log file. Use a semicolon-separated list of module names. By default, all modules are logged.
This property lets you customize the log file content by specifying the logging modules to include. Logging modules categorize logged information into distinct areas, such as query execution, metadata, or SSL communication. Each module is represented by a four-character code, with some requiring a trailing space for three-letter names.
For example, EXEC logs query execution, and INFO logs general provider messages. To include multiple modules, separate their names with semicolons as follows: INFO;EXEC;SSL.
The Verbosity connection property takes precedence over the module-based filtering specified by this property. Only log entries that meet the verbosity level and belong to the specified modules are logged. Leave this property blank to include all available modules in the log file.
For a complete list of available modules and detailed guidance on configuring logging, refer to the Advanced Logging section in Logging.
This section provides a complete list of the Schema properties you can configure in the connection string for this provider.
| Property | Description |
| Location | Specifies the location of a directory containing schema files that define tables, views, and stored procedures. Depending on your service's requirements, this may be expressed as either an absolute path or a relative path. |
| BrowsableSchemas | Optional setting that restricts the schemas reported to a subset of all available schemas. For example, BrowsableSchemas=SchemaA,SchemaB,SchemaC . |
| Tables | Optional setting that restricts the tables reported to a subset of all available tables. For example, Tables=TableA,TableB,TableC . |
| Views | Optional setting that restricts the views reported to a subset of the available tables. For example, Views=ViewA,ViewB,ViewC . |
Specifies the location of a directory containing schema files that define tables, views, and stored procedures. Depending on your service's requirements, this may be expressed as either an absolute path or a relative path.
The Location property is only needed if you want to either customize definitions (for example, change a column name, ignore a column, etc.) or extend the data model with new tables, views, or stored procedures.
If left unspecified, the default location is %APPDATA%\\CData\\SybaseIQ Data Provider\\Schema, where %APPDATA% is set to the user's configuration directory:
| Platform | %APPDATA% |
| Windows | The value of the APPDATA environment variable |
| Linux | ~/.config |
Optional setting that restricts the schemas reported to a subset of all available schemas. For example, BrowsableSchemas=SchemaA,SchemaB,SchemaC .
Listing all available database schemas can take extra time, thus degrading performance. Providing a list of schemas in the connection string saves time and improves performance.
Optional setting that restricts the tables reported to a subset of all available tables. For example, Tables=TableA,TableB,TableC .
Listing all available tables from some databases can take extra time, thus degrading performance. Providing a list of tables in the connection string saves time and improves performance.
If there are lots of tables available and you already know which ones you want to work with, you can use this property to restrict your viewing to only those tables. To do this, specify the tables you want in a comma-separated list. Each table should be a valid SQL identifier with any special characters escaped using square brackets, double-quotes or backticks. For example, Tables=TableA,[TableB/WithSlash],WithCatalog.WithSchema.`TableC With Space`.
Note: If you are connecting to a data source with multiple schemas or catalogs, you must specify each table you want to view by its fully qualified name. This avoids ambiguity between tables that may exist in multiple catalogs or schemas.
Optional setting that restricts the views reported to a subset of the available tables. For example, Views=ViewA,ViewB,ViewC .
Listing all available views from some databases can take extra time, thus degrading performance. Providing a list of views in the connection string saves time and improves performance.
If there are lots of views available and you already know which ones you want to work with, you can use this property to restrict your viewing to only those views. To do this, specify the views you want in a comma-separated list. Each view should be a valid SQL identifier with any special characters escaped using square brackets, double-quotes or backticks. For example, Views=ViewA,[ViewB/WithSlash],WithCatalog.WithSchema.`ViewC With Space`.
Note: If you are connecting to a data source with multiple schemas or catalogs, you must specify each view you want to examine by its fully qualified name. This avoids ambiguity between views that may exist in multiple catalogs or schemas.
This section provides a complete list of the Miscellaneous properties you can configure in the connection string for this provider.
| Property | Description |
| IncludeSystemObjects | Whether to include system objects while retrieving metadata. |
| MaxRows | Specifies the maximum rows returned for queries without aggregation or GROUP BY. |
| MaxTDSPacketSize | The protocol sending and receiving buffer size. For the lower version, it's from 512 to 512. For the newer version, it's from 512 to 2048. |
| Other | Specifies additional hidden properties for specific use cases. These are not required for typical provider functionality. Use a semicolon-separated list to define multiple properties. |
| QueryPassthrough | This option passes the query to the SybaseIQ server as is. |
| Timeout | A timeout for the provider. |
Whether to include system objects while retrieving metadata.
Whether to include system objects while retrieving metadata.
Specifies the maximum rows returned for queries without aggregation or GROUP BY.
This property sets an upper limit on the number of rows the Sync App returns for queries that do not include aggregation or GROUP BY clauses. This limit ensures that queries do not return excessively large result sets by default.
When a query includes a LIMIT clause, the value specified in the query takes precedence over the MaxRows setting. If MaxRows is set to "-1", no row limit is enforced unless a LIMIT clause is explicitly included in the query.
This property is useful for optimizing performance and preventing excessive resource consumption when executing queries that could otherwise return very large datasets.
The protocol sending and receiving buffer size. For the lower version, it's from 512 to 512. For the newer version, it's from 512 to 2048.
MaxTDSPacketSize allows you to control the protocol sending and receiving buffer size.
Specifies additional hidden properties for specific use cases. These are not required for typical provider functionality. Use a semicolon-separated list to define multiple properties.
This property allows advanced users to configure hidden properties for specialized scenarios. These settings are not required for normal use cases but can address unique requirements or provide additional functionality. Multiple properties can be defined in a semicolon-separated list.
Note: It is strongly recommended to set these properties only when advised by the support team to address specific scenarios or issues.
Specify multiple properties in a semicolon-separated list.
| DefaultColumnSize | Sets the default length of string fields when the data source does not provide column length in the metadata. The default value is 2000. |
| ConvertDateTimeToGMT | Determines whether to convert date-time values to GMT, instead of the local time of the machine. |
| RecordToFile=filename | Records the underlying socket data transfer to the specified file. |
This option passes the query to the SybaseIQ server as is.
When this is set, queries are passed through directly to SybaseIQ.
A timeout for the provider.
If the Timeout property is set to 0, operations will not time out; instead, they will run until they complete successfully or encounter an error condition.
If Timeout expires and the operation is not yet complete, the Sync App raises an error condition.