ODBC Driver for WordPress

Build 24.0.9062

macOS DSN の構成

このセクションでは、macOS でODBC 接続をセットアップしDSN を設定する方法を示します：

macOS の最小バージョン

CData ODBC Driver for WordPress 本製品 にはmacOS Sierra (10.12) 以上が必要です。

ドライバーのライセンス

端末で次のコマンドを実行して、本製品 のライセンスを取得します。評価版をアクティベートするには、<key> の入力を省略してください。 

cd "/Applications/CData ODBC Driver for WordPress/bin"
sudo ./install-license.sh <key>

名前とパスワードを入力するよう求められます。これらは、あなたの名前とマシンのパスワードを指します。

Connecting to WordPress

At this time, CData ODBC Driver for WordPress only supports connecting to self-hosted WordPress instances. To connect to data, supply the Url to your wordpress site, and then authenticate as described below.

Supply the URL in its full form. For example, if your site is hosted at http://localhost/wp/wordpress', the URL should be http://localhost/wp/wordpress, and not 'htpp://localhost'. Failure to supply the URL in its full form results in a 'site not found' error.

WordPress supports two types of authentication:

  • Basic authentication, which is recommended for use in a testing environment; and
  • OAuth 2.0 authentication, which supports browser-based access from a Desktop application, Web application, or Headless Machine.

Basic Authentication

Basic authentication is recommended for testing environments only.

Before you configure WordPress to use Basic Authentication:

  • Ensure that your WordPress login has adminstrative privileges.
  • Know what version of WordPress is running at the local host. (WordPress 4.7 and later support the WordPress REST API natively; earlier versions require the use of a Basic Authentication plug-in to secure access to the REST API.)

To configure Basic Authentication:

  1. Log into your WordPress host.
  2. If you are running an earlier WordPress version than 4.7, install the REST API plugin.
  3. Install the Basic Authentication plugin.
  4. To create custom taxonomies, install the Simple Taxonomy Refreshed
    If you prefer installing the plugins manually, extract the compressed folders to the wp-content\plugins folder and then enable the plugins via the WordPress admin interface.
  5. Set the following connection properties:
    • AuthScheme: Basic.
    • Url: Your WordPress URL.
    • User: Your username.
    • Password: Your password.

You are now ready to connect.

OAuth 2.0 Authentication

For all non-testing environments, WordPress supports OAuth authentication only. To enable this authentication from all OAuth flows, you must set AuthScheme to OAuth, and you must create a custom OAuth application.

The following subsections describe how to authenticate to WordPress from three common authentication flows. For information about how to create a custom OAuth application, see カスタムOAuth アプリケーションの作成. For a complete list of connection string properties available in WordPress, see Connection.

Desktop Applications

To authenticate with the credentials for a custom OAuth application, you must get and refresh the OAuth access token. After you do that, you are ready to connect.

Get and refresh the OAuth access token:

  • InitiateOAuth: GETANDREFRESH. Used to automatically get and refresh the OAuthAccessToken.
  • OAuthClientId: The client Id assigned when you registered your application.
  • OAuthClientSecret: The client secret that was assigned when you registered your application.
  • CallbackURL: The redirect URI that was defined when you registered your application.

When you connect, the 本製品 opens WordPress's OAuth endpoint in your default browser. Log in and grant permissions to the application.

When the access token expires, the 本製品 refreshes it automatically.

Automatic refresh of the OAuth access token:

To have the 本製品 automatically refresh the OAuth access token, do the following:

  1. Before connecting to data for the first time, set the following connection parameters:
    • InitiateOAuth: REFRESH.
    • OAuthClientId: The client Id in your application settings.
    • OAuthClientSecret: The client secret in your application settings.
    • OAuthAccessToken: The access token returned by GetOAuthAccessToken.
    • OAuthSettingsLocation: The path where you want the 本製品 to save the OAuth values, which persist across connections.
  2. On subsequent data connections, set the following:
    • InitiateOAuth
    • OAuthSettingsLocation

Headless Machines

If you need to log in to a resource that resides on a headless machine, you must authenticate on another device that has an internet browser. You can do this in either of the following ways:

  • Option 1: Obtain the OAuthVerifier value.
  • Option 2: Install the 本製品 on a machine with an internet browser and transfer the OAuth authentication values after you authenticate through the usual browser-based flow.

After you execute either Option 1 or Option 2, configure the driver to automatically refresh the access token on the headless machine.

Option 1: Obtaining and Exchanging a Verifier Code

To obtain a verifier code, you must authenticate at the OAuth authorization URL. Do the following:

  1. Authenticate from the machine with an internet browser, and obtain the OAuthVerifier connection property.

    Set the following properties:

    • InitiateOAuth: OFF.
    • OAuthClientId: The client Id assigned when you registered your application.
    • OAuthClientSecret: The client secret assigned when you registered your application.

  2. Call the GetOAuthAuthorizationURL stored procedure. The stored procedure returns the CallbackURL established when the custom OAuth application was registered. (See カスタムOAuth アプリケーションの作成.)

    Copy this URL and paste it into a new browser tab.

  3. Log in and grant permissions to the 本製品. The OAuth application redirects you the redirect URI, with a parameter called code appended. Note the value of this parameter; you will need it later, to configure the OAuthVerifier connection property.

  4. Exchange the OAuth verifier code for OAuth refresh and access tokens. On the headless machine, set the following connection properties to obtain the OAuth authentication values:

    • InitiateOAuth: REFRESH.
    • OAuthVerifier: The noted verifier code (the value of the code parameter in the redirect URI).
    • OAuthSettingsLocation: Persist the encrypted OAuth authentication values to the specified file.
    • OAuthClientId: The client Id in your custom OAuth application settings.
    • OAuthClientSecret: The client secret in the custom OAuth application settings.

  5. Test the connection to generate the OAuth settings file.

  6. After you re-set the following properties, you are ready to connect:

    • InitiateOAuth: REFRESH.
    • OAuthSettingsLocation: The file containing the encrypted OAuth authentication values. To enable the automatic refreshing of the access token, be sure that this file gives read and write permissions to the 本製品.
    • OAuthClientId: The client Id assigned when you registered your application.
    • OAuthClientSecret: The client secret assigned when you registered your application.

Option 2: Transferring OAuth Settings

Prior to connecting on a headless machine, you must install and create a connection with the driver on a device that supports an internet browser. Set the connection properties as described above in "Desktop Applications".

After completing the instructions in "Desktop Applications", the resulting authentication values are encrypted and written to the path specified by OAuthSettingsLocation. The default filename is OAuthSettings.txt.

Test the connection to generate the OAuth settings file, then copy the OAuth settings file to your headless machine.

To connect to data via the headless machine, set the following connection properties:

  • InitiateOAuth: REFRESH
  • OAuthSettingsLocation: The path to the OAuth settings file you copied from the machine with the browser. To enable automatic refreshing of the access token, ensure that this file gives read and write permissions to the 本製品.
  • OAuthClientId: The client Id assigned when you registered your custom OAuth application.
  • OAuthClientSecret: The client secret assigned when you registered your custom OAuth application.

ドライバーのアンインストール

ドライバーをアンインストールする最も簡単な方法は、ターミナルを開いて、インストールディレクトリにあるuninstall.sh スクリプトを実行します。次に例を示します。 

cd "/Applications/CData ODBC Driver for WordPress"
sudo ./uninstall.sh

Note：このスクリプトはインストールディレクトリから実行される必要があります。

Copyright (c) 2024 CData Software, Inc. - All rights reserved.
Build 24.0.9062