This page provides a guide to Establishing a Connection to Splunk in CData Cloud, as well as information on the available resources, and a reference to the available connection properties.

Connecting to Splunk

Establishing a Connection shows how to authenticate to Splunk and configure any necessary connection properties to create a database in CData Cloud

Accessing Data from CData Cloud Services

Accessing data from Splunk through the available standard services and CData Cloud administration is documented in further details in the CData Cloud Documentation.

Connect to Splunk by selecting the corresponding icon in the Database tab. Required properties are listed under Settings. The Advanced tab lists connection properties that are not typically required.

Connecting to Splunk APIs

You must specify the URL to a valid Splunk server. By default the Cloud makes requests on port 8089.

By default, the Cloud attempts to negotiate TLS/SSL with the server.

Authenticating to Splunk

There are two ways to authenticate to Splunk data: logging in with Splunk credentials, or using a Splunk authentication token.

Splunk Credentials

To authenticate with Splunk credentials, set User and Password to your login credentials.

Splunk Token

When you access Splunk via an authentication token, you can access the Splunk platform using Representational State Transfer (REST) calls. On Splunk Enterprise, you can also use the CLI. Both of these methods enable you to access the instance and make requests without having to authenticate via credentials.

Note: Unless you are accessing a search head cluster (where you can use the same token to access all available head clusters), you must have a separate token for each instance being accessed.

To authenticate with a Splunk token:

1. In the Splunk UI, navigate to Users and Authentication > Tokens to access your assigned authentication token. If you do not have one, request one from the administrator of the instance you want to access.
2. Set the AuthScheme to AccessToken; and the AccessToken property to your Splunk token.

Customizing the SSL Configuration

To enable TLS, set the following:

• URL: Prefix the connection string with https://

With this configuration, the Cloud attempts to negotiate TLS with the server. The server certificate is validated against the default system trusted certificate store. You can override how the certificate gets validated using the SSLServerCert connection property.

To specify another certificate, see the SSLServerCert connection property.

Connecting Through a Firewall or Proxy

HTTP Proxies

To authenticate to an HTTP proxy, set the following:

• ProxyServer: the hostname or IP address of the proxy server that you want to route HTTP traffic through.
• ProxyPort: the TCP port that the proxy server is running on.
• ProxyAuthScheme: the authentication method the Cloud uses when authenticating to the proxy server.
• ProxyUser: the username of a user account registered with the proxy server.
• ProxyPassword: the password associated with the ProxyUser.

Other Proxies

Set the following properties:

• To use a proxy-based firewall, set FirewallType, FirewallServer, and FirewallPort.
• To tunnel the connection, set FirewallType to TUNNEL.
• To authenticate, specify FirewallUser and FirewallPassword.
• To authenticate to a SOCKS proxy, additionally set FirewallType to SOCKS5.

The Cloud models Splunk reports, searches, datasets, and data models as tables in a relational database that you can read from/write to with SQL-92 queries.

Dynamic Schema Generation

You can work with all of the tables in your account: when you connect the Cloud retrieves the metadata from Splunk and dynamically reflects any changes in the table schemas.

You can call the CreateSchema stored procedure to persist a static schema across connections. The stored procedure saves the schema to a text file; the text file has a simple format that also makes schemas easy to customize.

Tables

See Tables for more details on updating and querying datasets, data models, and searches.

Views

The Cloud also surfaces data through Views representing the following Splunk objects:

• Reports: See LookUpReport for an example of a view representing a saved report in Splunk.
• Data-model datasets: See AlertsInInternalServer for an example of a view representing a dataset. See Datasets to retrieve a list of dataset views.
• Table-type datasets: See UploadedModel for an example of a view representing a table dataset in Splunk.

The Cloud models the data in Splunk as a list of tables in a relational database that can be queried using standard SQL statements.

CData Cloud - Splunk Tables

Name	Description
DataModels	Create, query, update, and delete data models in Splunk.
Datasets	Create, query, update, and delete datasets in Splunk.
SearchJobs	Create, query, update, and delete search jobs in Splunk.

Create, query, update, and delete data models in Splunk.

Select

The Cloud will use the Splunk API to process search criteria that refer to the Id column. This column supports server-side processing for the = operator. The Cloud processes other filters client-side within the Cloud.

For example, the following query is processed server side by the Splunk APIs:

SELECT * FROM DataModels WHERE Id = 'SampleModel' 

Insert

The Id column is the minimum requirement for an insert. In an insert, the DataModels table allows only the Id and Acceleration columns.

INSERT INTO DataModels (Id, Acceleration) VALUES ('initialname', '{"enabled":false,"earliest_time":"","hunk.file_format":"","hunk.dfs_block_size":0,"hunk.compression_codec":""}' )

Update

The DataModels table allows updates for the Acceleration column when Id is specified. You can also set the Provisional pseudocolumn.

UPDATE DataModels SET Provisional = 'true', Acceleration = '{"enabled":false,"earliest_time": "-1mon", "cron_schedule": "0 */12 * * *","hunk.file_format":"","hunk.dfs_block_size":0,"hunk.compression_codec":""}' WHERE Id = 'initialname' 

Delete

The DataModels table allows deleting a record when Id is specified.

DELETE FROM Datamodels WHERE Id = 'initialname' 

Columns

Name	Type	ReadOnly	References	Description
Id [KEY]	String	True		Link of the data model.
Disabled	Boolean	True		Indicates if the data model is disabled/enabled.
UpdatedAt	Datetime	True		Datetime of the last update of the data model.
Description	String	True		Description of the data model.
Name	String	False		The name of the data model in Splunk.
DisplayName	String	True		The name displayed for the data model in Splunk.
Author	String	True		Splunk user who created the data model.
App	String	True		Splunk app where the data model is shared.
Owner	String	True		Splunk user who owns the data model.
CanShareApp	Boolean	True		Boolean indicating whether the data model can be shared in an app.
CanShareGlobal	Boolean	True		Boolean indicating whether the data model can be shared globally.
CanShareUser	Boolean	True		Boolean indicating whether the data model can be shared by the user.
CanWrite	Boolean	True		Boolean indicating whether the data model can be extended by the user.
Modifiable	Boolean	True		Boolean indicating whether the data model can be modified.
Removable	Boolean	True		Boolean indicating whether the data model can be removed.
Acceleration	String	False		Acceleration settings for the data model. Supply JSON to specify any or all of the following settings: enabled (true or false), earliest_time (time modifier), or cron_schedule (cron string).
AccelerationAllowed	Boolean	True		Boolean indicating that acceleration is allowed or not for the data model.
AccelerationHunkCompression	String	True		Specifies the compression codec to be used for the accelerated orc or parquet format files.
DatasetCommands	String	True		Data model commands.
DatasetDescription	String	True		The JSON describing the data model.
DatasetCurrentCommand	Integer	True		Current command of the data model.
DatasetEarliestTime	Datetime	True		Earliest time of data model events being processed.
DatasetLatestTime	Datetime	True		Latest time of data model events being processed.
DatasetDiversity	String	True		Diversity of events being processed.
DatasetLimiting	Integer	True		Limitations of events being processed.
DatasetMode	String	True		Search mode events being processed.
DatasetSampleRatio	String	True		Sample ratio of the data model.
DatasetFields	String	True		Indexed fields the data model has.
DatasetType	String	True		Dataset type.
Type	String	True		Data model type.
Digest	String	True		Content digest type.
TagsWhitelist	String	True		Whitelist of data model tags.
ReadPermitions	String	True		Permissions to read this data model.
WritePermitions	String	True		Permissions to write to this data model.
Sharing	String	True		Data model sharing type.
Username	String	True		Username of the Splunk user.

Pseudo-Columns

Pseudo column fields are used in the WHERE clause of SELECT statements and offer a more granular control over the tuples that are returned from the data source.

Name	Type	Description
Provisional	Boolean	Indicates whether the data model is provisional. Provisional data models are not saved. Specify true to validate a data model before saving it.

Create, query, update, and delete datasets in Splunk.

Select

The Datasets table requires DataModelId in the WHERE clause. The DataModelId column supports server-side processing for the = operator. The Cloud processes other search criteria client-side within the Cloud.

SELECT * FROM DataSets  WHERE DataModelId = 'SampleModel' 

Insert

Splunk allows inserts only when DataModelId, ParentName, and ObjectName are all specified.

INSERT INTO [Datasets] (ObjectName, ParentName, DataModelId) VALUES ('SampleSet', 'BaseEvent', 'SampleModel')

Update

The Datasets table allows updates when DataModelId is specified. The columns that can be updated in this case are the following: Description and DisplayName.

When ObjectName is also specified, you can update the following columns: ObjectDisplayName, ParentName, Comment, Fields, Calculations, Constraints, Lineage, ObjectSearchNoFields, ObjectSearch, AutoextractSearch, PreviewSearch, AccelerationSearch, BaseSearch, and TsidxNamespace.

UPDATE Datasets SET Description = 'model description', DisplayName = 'Model Display Name' WHERE DataModelId = 'SampleModel' 

UPDATE Datasets SET ParentName = 'BaseEvent', BaseSearch = '| search (index=* OR index=_*) | fields _time, RootObject', AccelerationSearch = ' search (index=* OR index=_*) ' WHERE DataModelId = 'SampleModel' AND ObjectName = 'SampleSet' 

Delete

Datasets can be deleted by providing the DataModelId and the ObjectName of the dataset.

DELETE FROM Datasets WHERE DataModelId = 'SampleModel' AND ObjectName = 'SampleSet'

Columns

Name	Type	ReadOnly	References	Description
ObjectName [KEY]	String	False		Name of the dataset object.
DatamodelId [KEY]	String	False	DataModels.Id	Id of the data model the object belongs to.
DisplayName	String	False		Name of the data model the object belongs to.
Description	String	False		Dataset description.
ObjectNameList	String	True		List of the objects in the data model.
ObjectDisplayName	String	False		Name displayed in Splunk for the object.
ParentName	String	False		Name of the Parent Event.
Comment	String	False		Dataset comments.
Fields	String	False		Dataset events indexed fields.
Calculations	String	False		Saved calculations for dataset fields.
Constraints	String	False		Saved constraints for dataset fields.
Lineage	String	False		Dataset lineage.
ObjectSearchNoFields	String	False		Object search query without fields.
ObjectSearch	String	False		Saved search query for the object.
AutoextractSearch	String	False		Search query for autoextraction.
PreviewSearch	String	False		Search preview query.
AccelerationSearch	String	False		Search query including acceleration.
BaseSearch	String	False		Basic search query.
TsidxNamespace	String	False		Allocated namespace.
EventBased	Integer	True		Number of Event-Based objects in the data model.
TransactionBased	Integer	True		Number of Transaction-Based objects in the data model.
SearchBased	Integer	True		Number of Search-Based objects in the data model.

Create, query, update, and delete search jobs in Splunk.

Select

The Cloud will use the Splunk APIs to process the search Id (Sid) criteria specified in the WHERE clause. The Sid column supports server-side processing for the = operator. The Cloud processes other search criteria client-side within the Cloud.

SELECT * FROM SearchJobs
SELECT * FROM SearchJobs WHERE Sid = '123456789.1234' 

Insert

Splunk allows inserts only when EventSearch is specified. You can insert the Custom, EarliestTime, LatestTime, Label, and StatusBuckets columns and all pseudocolumns.

INSERT INTO SearchJobs (Custom, EventSearch, LatestTime, Timeout) VALUES ('custom1=test1, custom2=test2', ' from datamodel SampleModel', 'now', '60')

Update

The SearchJobs table allows updates of the Custom column only when Sid is specified.

UPDATE SearchJobs SET Custom = 'custom1=test3, custom2=test4' WHERE sid = '123456789.1234' 

Delete

SearchJobs can be deleted by providing the Sid.

DELETE FROM SearchJobs WHERE Sid = '123456789.1234'

Columns

Name	Type	ReadOnly	References	Description
Sid [KEY]	String	False		The search Id number.
EventSearch	String	False		Subset of the entire search that is before any transforming commands.
Custom	String	False		Custom job property. In an INSERT operation, pass the values as a comma-separated list of pairs of keys and values.
EarliestTime	String	False		The earliest time a search job is configured to start.
LatestTime	String	False		The latest time a search job is configured to start.
CursorTime	String	True		The earliest time from which no events are later scanned. Can be used to indicate progress.
Delegate	String	True		For saved searches, specifies jobs that were started by the user. Defaults to scheduler.
DiskUsage	Long	True		The total amount of disk space used, in bytes.
DispatchState	String	True		The state of the search. Can be any of QUEUED, PARSING, RUNNING, PAUSED, FINALIZING, FAILED, or DONE.
DoneProgress	Double	True		A number between 0 and 1.0 that indicates the approximate progress of the search. doneProgress = (latestTime-cursorTime) / (latestTime-earliestTime)
DropCount	Integer	True		For real-time searches only, the number of possible events that were dropped due to the rt_queue_size (defaults to 100000).
EventAvailableCount	Integer	True		The number of events that are available for export.
EventCount	Integer	True		The number of events returned by the search.
EventFieldCount	Integer	True		The number of fields found in the search results.
EventIsStreaming	Boolean	True		Indicates if the events of this search are being streamed.
EventIsTruncated	Boolean	True		Indicates if the events of the search are not stored, making them unavailable from the events endpoint for the search.
EventPreviewableCount	Integer	True		Number of in-memory events that are not yet committed to disk.
EventSorting	String	True		Indicates if the events of this search are sorted, and in which order.
IsDone	Boolean	True		Indicates if the search has completed.
IsEventsPreviewEnabled	String	True		Indicates if the timeline_events_preview setting is enabled in limits.conf.
IsFailed	Boolean	True		Indicates if there was a fatal error executing the search. For example, invalid search string syntax.
IsFinalized	Boolean	True		Indicates if the search was finalized (stopped before completion).
IsPaused	Boolean	True		Indicates if the search is paused.
IsPreviewEnabled	Boolean	True		Indicates if previews are enabled.
IsRealTimeSearch	Boolean	True		Indicates if the search is a real-time search.
IsRemoteTimeline	Boolean	True		Indicates if the remote timeline feature is enabled.
IsSaved	Boolean	True		Indicates that the search job is saved on disk. Search artifacts are saved on disk for 7 days from the last time that the job was viewed or touched.
IsSavedSearch	Boolean	True		Indicates if this is a saved search run using the scheduler.
IsZombie	Boolean	True		Indicates if the process running the search died without finishing the search.
Keywords	String	True		All positive keywords used by this search. A positive keyword is a keyword that is not in a NOT clause.
Label	String	False		Custom name created for this search.
Messages	String	True		Errors and debug messages.
NumPreviews	Integer	True		Number of previews generated so far for this search job.
Performance	String	True		A representation of the execution costs.
Priority	Integer	True		An integer between 0-10 that indicates the search priority.
RemoteSearch	String	True		The search string that is sent to every search peer.
ReportSearch	String	True		If reporting commands are used, the reporting search.
ResultCount	Integer	True		The total number of results returned by the search. In other words, this is the subset of scanned events (represented by the ScanCount) that actually matches the search terms.
ResultIsStreaming	Boolean	True		Indicates if the final results of the search are available using streaming (for example, no transforming operations).
ResultPreviewCount	Integer	True		The number of result rows in the latest preview results.
RunDuration	Decimal	True		Time in seconds that the search took to complete.
ScanCount	Integer	True		The number of events that are scanned or read off disk.
SearchEarliestTime	Datetime	True		Specifies the earliest time for a search, as specified in the search command rather than the EarliestTime parameter. It does not snap to the indexed data time bounds for all-time searches.
SearchLatestTime	Datetime	True		Specifies the latest time for a search, as specified in the search command rather than the LatestTime parameter. It does not snap to the indexed data time bounds for all-time searches.
SearchProviders	String	True		A list of all the search peers that were contacted.
StatusBuckets	Integer	False		Maximum number of timeline buckets.
TTL	String	True		The time to live, or the time before the search job expires after it completes.

Pseudo-Columns

Pseudo column fields are used in the WHERE clause of SELECT statements and offer a more granular control over the tuples that are returned from the data source.

Name	Type	Description
SearchMode	String	Searching mode, realtime or normal. If set to realtime, the search runs over the live data. The allowed values are normal, realtime.
EnableLookups	Boolean	Indicates whether lookups should be applied to events.
AutoPause	Integer	If specified, the search job pauses after this many seconds of inactivity. (0 means never autopause.)
AutoCancel	Integer	If specified, the job automatically cancels after this many seconds of inactivity. (0 means never autocancel.)
AdhocSearchLevel	Integer	Specify a search mode. Use one of the following search modes: verbose, fast, or smart. The allowed values are verbose, fast, smart.
ForceBundleReplication	Boolean	Specifies whether this search should cause (and wait depending on the value of SyncBundleReplication) for bundle synchronization with all search peers.
IndexEarliest	String	Specify a time string. Sets the earliest inclusive time bounds for the search, based on the index time bounds.
IndexLatest	String	Specify a time string. Sets the latest exclusive time bounds for the search, based on the index time bounds.
IndexedRealtime	Boolean	Indicates whether or not to use the indexed-realtime mode for real-time searches.
IndexedRealtimeOffset	Integer	Sets disk sync delay for indexed real-time search (seconds).
MaxCount	Integer	The number of events that can be accessible in any given status bucket.
MaxTime	Integer	Comma-separated list of (possibly wildcarded) servers from which raw events should be pulled.
Namespace	String	The application namespace in which to restrict searches.
Now	String	Specify a time string to set the absolute time used for any relative time specifier in the search. Defaults to the current system time. You can specify a relative time modifier for this parameter. For example, specify +2d to specify the current time plus two days.
ReduceFrequency	Integer	Determines how frequently to run the MapReduce reduce phase on accumulated map values.
ReloadMacros	Boolean	Specifies whether to reload macro definitions from the configuration file.
RemoteServerList	Integer	The number of seconds to run this search before finalizing. Specify 0 to never finalize.
ReplaySpeed	Integer	Indicate a real-time search replay speed factor. For example, 1 indicates normal speed, 0.5 indicates half of normal speed, and 2 indicates twice as fast as normal.
ReplayStartTime	String	Relative wall-clock start time for the replay.
ReplayEndTime	String	Relative end time for the replay clock. The replay stops when the clock time reaches this time.
ReuseMaxSecondsAgo	Integer	Specifies the number of seconds ago to check when an identical search is started and return the search Id of the job instead of starting a new job.
RequiredField	String	Adds a required field to the search.
RealTimeBlocking	Boolean	For a real-time search, indicates if the indexer blocks if the queue for this search is full.
RealTimeIndexFilter	Boolean	For a real-time search, indicates if the indexer prefilters events.
RealTimeMaxBlockSecs	Integer	For a real-time search with RealTimeBlocking set to true, the maximum time to block. Specify 0 to indicate no limit.
RealTimeQueueSize	Integer	For a real-time search, the queue size (in events) that the indexer should use for this search.
Timeout	Integer	The number of seconds to keep this search after processing has stopped.
SyncBundleReplication	String	Specifies whether this search should wait for bundle replication to complete.

Views are similar to tables in the way that data is represented; however, views are read-only.

Queries can be executed against a view as if it were a normal table.

CData Cloud - Splunk Views

Name	Description
AlertsInInternalServer	A dataset object in the example InternalServer data model.
LookUpReport	An example lookup report representing a view based on a saved report in Splunk.
UploadedModel	An example of a table object inside a data model.

A dataset object in the example InternalServer data model.

Select

This is an example of a dataset view. These views are generated from dataset objects inside a data model. The Cloud will use the Splunk APIs to process the following query components; the Cloud processes other parts of the query client-side in memory.

All columns support server-side processing for the following operators and functions:

• Operators: =, <, >, >=, <=, IN, IS NULL, IS NOT NULL, NOT
• Functions: AVG, SUM, MIN, MAX, COUNT, STDEV, STDEVP, VAR, VARP

LIMIT, ORDER BY, GROUP BY, and HAVING are also processed server-side. An exception is the case when in the selected columns, there are fields that are not in the GROUP BY, and GROUP BY, criteria, and limiting are handled client-side.

In the case when an unsupported criteria or function is used, all processing will be completed client-side (except selecting specified fields). This is also the case when a SELECT statement has a column that is not in the GroupBy clause.

For example, the Cloud uses the Splunk APIs to process the following queries.

SELECT Component, Timeendpos as Timeend FROM [AlertsInInternalServer] WHERE Component = 'Saved' OR EventType != '' AND Priority IS NOT NULL AND Linecount NOT IN ('1', '2') ORDER BY Priority DESC LIMIT 5 

SELECT AVG(Suppressed), Priority FROM [AlertsInInternalServer] GROUP BY Priority HAVING AVG(Suppressed) > 0 

Columns

Name	Type	Description
_time	Datetime
component	String
date_hour	Int
date_mday	Int
date_minute	Int
date_month	String
date_second	Int
date_wday	String
date_year	Int
date_zone	Int
digest_mode	Int
dispatch_time	Int
host	String
linecount	Int
log_level	String
priority	String
punct	String
savedsearch_id	String
scheduled_time	Int
search_type	String
server_alert_actions	String
server_app	String
server_message	String
server_result_count	Int
server_run_time	Double
server_savedsearch_name	String
server_sid	String
server_status	String
server_user	String
source	String
sourcetype	String
splunk_server	String
suppressed	Int
thread_id	String
timeendpos	Int
timestartpos	Int
window_time	Int

An example lookup report representing a view based on a saved report in Splunk.

Select

This is an example of a report view. These views are generated from saved reports in Splunk.

The Cloud will use the Splunk APIs to process the following query components; the Cloud processes other parts of the query client-side in memory.

Saved Search

Runs a saved search, or report, and returns the search results of a saved search. If the search contains replacement placeholder terms, such as $replace_me$, the search processor replaces the placeholders with the strings you specify.

For example:

• SELECT * FROM mysearch WHERE replace_me = 'value'

Will generate the following search statement:

• | savedsearch mysearch replace_me="value"

All replacement placeholder terms will be dynamic and saved as Pseudo-Columns.

All columns support server-side processing for the following operators and functions:

• Operators: =, <, >, >=, <=, IN, IS NULL, IS NOT NULL, NOT, LIKE
• Functions: AVG, SUM, MIN, MAX, COUNT, STDEV, STDEVP, VAR, VARP

LIMIT, ORDER BY, GROUP BY, and HAVING are also processed server-side. An exception is the case when in the selected columns, there are fields that are not in the GROUP BY, and GROUP BY, criteria, and limiting are handled client-side.

In the case when an unsupported criteria or function is used, all processing will be completed client-side (except selecting specified fields). This is also the case when a SELECT statement has a column that is not in the GROUP BY clause.

For example, the Cloud processes the following queries server-side:

SELECT Country, Subregion as Sub FROM LookUpReport WHERE Iso2 != '123' OR continent = 'Europe' AND iso3 NOT IN ('example_1', 'example_2') ORDER BY Country DESC LIMIT 5 

SELECT AVG(Iso2), Subregion FROM LookUpReport GROUP BY Subregion HAVING AVG(Iso2) > 0 

Columns

Name	Type	Description
continent	String
country	String
iso2	String
iso3	String
region_un	String
region_wb	String
subregion	String

An example of a table object inside a data model.

Select

This is an example of a view generated from a table object inside a data model. The Cloud will use the Splunk APIs to process the following query components; the Cloud processes other parts of the query client-side in memory.

All columns support server-side processing for the following operators and functions.

• Operators: =, <, >, >=, <=, IN, IS NULL, IS NOT NULL, NOT
• Functions: AVG, SUM, MIN, MAX, COUNT, STDEV, STDEVP, VAR, VARP

LIMIT, ORDER BY, GROUP BY, and HAVING are also processed server-side. An exception is the case when in the selected columns, there are fields that are not in the GROUP BY, and GROUP BY, criteria, and limiting are handled client-side.

In the case when an unsupported criteria or function is used, all processing will be completed client-side (except selecting specified fields). This is also the case when a SELECT statement has a column that is not in the GROUP BY clause.

For example, the following queries are processed server side:

SELECT Component, Timeendpos as Timeend FROM [UploadedModel] WHERE Component = 'Saved' OR DEST_CITY_MARKET_ID != '' AND DEST_AIRPORT_ID NOT IN ('1', '2') ORDER BY ORIGIN_AIRPORT_ID DESC LIMIT 5 

SELECT AVG(DEST_AIRPORT_ID), ORIGIN_AIRPORT_ID FROM [UploadedModel] GROUP BY ORIGIN_AIRPORT_ID HAVING AVG(DEST_AIRPORT_ID) > 0 

Columns

Name	Type	Description
_time	Datetime
DEST_AIRPORT_ID	Int
DEST_AIRPORT_SEQ_ID	Int
DEST_CITY_MARKET_ID	Int
host	String
linecount	Int
ORIGIN_AIRPORT_ID	Int
ORIGIN_AIRPORT_SEQ_ID	Int
ORIGIN_CITY_MARKET_ID	Int
punct	String
source	String
sourcetype	String
splunk_server	String
timestamp	String

Stored procedures are function-like interfaces that extend the functionality of the Cloud beyond simple SELECT/INSERT/UPDATE/DELETE operations with Splunk.

Stored procedures accept a list of parameters, perform their intended function, and then return any relevant response data from Splunk, along with an indication of whether the procedure succeeded or failed.

CData Cloud - Splunk Stored Procedures

Name	Description
CreateHTTPEvent	The HTTP Event Collector (HEC) lets you send data and application events to a Splunk deployment over the HTTP and Secure HTTP (HTTPS) protocols.
CreateIndex	Create a data index.
CreateSavedSearch	Create a saved search.
DeleteIndex	Delete a data index.
ReadJobResults	Read the results of a job given a search ID.
UpdateIndex	Update a data index.
UpdateSavedSearch	Update a saved search.

The HTTP Event Collector (HEC) lets you send data and application events to a Splunk deployment over the HTTP and Secure HTTP (HTTPS) protocols.

Input

Name	Type	Required	Description
EventContent	String	True	The name of the table or view.
ContentType	String	False	The type of the content specified on the EventContent input. Allowed values: JSON, RAWTEXT.
ChannelGUID	String	False	The GUID of the channel used for the event. This is requeired in case of ContentType=RAWTEXT.

Result Set Columns

Name	Type	Description
Success	String	Returns the success status of the created event.

Create a data index.

Input

Name	Type	Required	Description
Name	String	True	The name of the index to create.
BlockSignSize	String	False	Controls how many events make up a block for block signatures. If this is set to 0, block signing is disabled for this index. A recommended value is 100.
BucketRebuildMemoryHint	String	False	Suggestion for the bucket rebuild process for the size of the time-series (tsidx) file to make. Default value, auto, varies by the amount of physical RAM on the host.
ColdPath	String	False	An absolute path that contains the colddbs for the index. The path must be readable and writable.
ColdToFrozenDir	String	False	Destination path for the frozen archive. Use as an alternative to a ColdToFrozenScript.
ColdToFrozenScript	String	False	Path to the archiving script.
DataType	String	False	Specifies the type of index.
EnableOnlineBucketRepair	String	False	Enables asynchronous 'online fsck' bucket repair, which runs concurrently with splunk software. When enabled, you do not have to wait until buckets are repaired to start the splunk platform.
FrozenTimePeriodInSecs	String	False	Number of seconds after which indexed data rolls to frozen. Defaults to 188697600 (6 years).
HomePath	String	False	An absolute path that contains the hot and warm buckets for the index.
MaxBloomBackfillBucketAge	String	False	Valid values are: integer[m|s|h|d] if a warm or cold bucket is older than the specified age, do not create or rebuild its bloomfilter. Specify 0 to never rebuild bloomfilters.
MaxConcurrentOptimizes	String	False	The number of concurrent optimize processes that can run against a hot bucket.
MaxDataSize	String	False	The maximum size in MB for a hot DB to reach before a roll to warm is triggered. Specifying 'auto' or 'auto_high_volume' causes Splunk software to autotune this parameter (recommended).
MaxHotBuckets	String	False	Maximum hot buckets that can exist per index.
MaxHotIdleSecs	String	False	Maximum life, in seconds, of a hot bucket.
MaxHotSpanSecs	String	False	Upper bound of target maximum timespan of hot/warm buckets in seconds.
MaxMemMB	String	False	The amount of memory, expressed in MB, to allocate for buffering a single tsidx file into memory before flushing to disk.
MaxMetaEntries	String	False	Sets the maximum number of unique lines in . data files in a bucket, which may help to reduce memory consumption.
MaxTimeUnreplicatedNoAcks	String	False	Upper limit, in seconds, on how long an event can sit in raw slice. Applies only if replication is enabled for this index.
MaxTimeUnreplicatedWithAcks	String	False	Upper limit, in seconds, on how long events can sit unacknowledged in a raw slice. Applies only if you have enabled acks on forwarders and have replication enabled (with clustering).
MaxTotalDataSizeMB	String	False	The maximum size of an index (in MB). If an index grows larger than the maximum size, the oldest data is frozen.
MaxWarmDBCount	String	False	The maximum number of warm buckets. If this number is exceeded, the warm bucket/s with the lowest value for their latest times is moved to cold.
MinRawFileSyncSecs	String	False	Specify an integer (or 'disable') for this parameter. This parameter sets how frequently splunkd forces a filesystem sync while compressing journal slices.
MinStreamGroupQueueSize	String	False	Minimum size of the queue that stores events in memory before committing them to a tsidx file.
PartialServiceMetaPeriod	String	False	Related to serviceMetaPeriod. If set, it enables metadata sync every SPECIFIED seconds, but only for records where the sync can be done efficiently in-place, without requiring a full re-write of the metadata file.
ProcessTrackerServiceInterval	String	False	Specifies, in seconds, how often the indexer checks the status of the child OS processes it launched to see if it can launch new processes for queued requests. If set to 0, the indexer checks child process status every second.
QuarantineFutureSecs	String	False	Events with timestamp of QuarantineFutureSecs newer than 'now' are dropped into quarantine bucket.
QuarantinePastSecs	String	False	Events with timestamp of quarantinePastSecs older than 'now' are dropped into quarantine bucket.
RawChunkSizeBytes	String	False	Target uncompressed size in bytes for individual raw slice in the rawdata journal of the index. 0 is not a valid value. If 0 is specified, rawChunkSizeBytes is set to the default value.
RepFactor	String	False	Index replication control. This parameter applies to only clustering slaves. auto = Use the master index replication configuration value. 0 = Turn off replication for this index.
RotatePeriodInSecs	String	False	How frequently (in seconds) to check if a new hot bucket needs to be created. Also, how frequently to check if there are any warm/cold buckets that should be rolled/frozen.
ServiceMetaPeriod	String	False	Defines how frequently metadata is synced to disk, in seconds.
SyncMeta	String	False	When true, a sync operation is called before file descriptor is closed on metadata file updates. This functionality improves integrity of metadata files, especially in regards to operating system crashes/machine failures.
ThawedPath	String	False	An absolute path that contains the thawed (resurrected) databases for the index. Cannot be defined in terms of a volume definition.
ThrottleCheckPeriod	String	False	Defines how frequently Splunk software checks for index throttling condition, in seconds.
TstatsHomePath	String	False	Location to store datamodel acceleration TSIDX data for this index. If specified, it must be defined in terms of a volume definition. Path must be writable.
WarmToColdScript	String	False	Path to a script to run when moving data from warm to cold.

Result Set Columns

Name	Type	Description
AssureUTF8	Boolean	Boolean value indicating wheter all data retreived from the index is proper UTF8.
BlockSignSize	Integer	Controls how many events make up a block for block signatures. If this is set to 0, block signing is disabled for this index. A recommended value is 100.
BlockSignatureDatabase	String	The index that stores block signatures of events. This is a global setting, not a per index setting.
BucketRebuildMemoryHint	String	Suggestion for the bucket rebuild process for the size of the time-series (tsidx) file to make.
ColdPath	String	Filepath to the cold databases for the index.
ColdPathExpanded	String	Absoute filepath to the cold databases.
ColdToFrozenDir	String	Destination path for the frozen archive. Use as an alternative to a ColdToFrozenScript.
ColdToFrozenScript	String	Path to the archiving script.
CurrentDBSizeMB	Integer	Total size, in MB, of data stored in the index. The total incudes data in the home, cold and thawed paths.
DataType	String	The type of index.
DefaultDatabase	String	If no index destination information is available in the input data, the index shown here is the destination of such data.
EnableOnlineBucketRepair	Boolean	Enables asynchronous 'online fsck' bucket repair, which runs concurrently with splunk software. When enabled, you do not have to wait until buckets are repaired to start the splunk platform.
FrozenTimePeriodInSecs	Integer	Number of seconds after which indexed data rolls to frozen.
HomePath	String	An absolute path that contains the hot and warm buckets for the index.
HomePathExpanded	String	An absolute filepath to the hot and warm buckets for the index.
IndexThreads	String	Number of threads used for indexing. This is a global setting, not a per index setting.
IsInternal	Boolean	Indicates if this is an internal index.
IsReady	Boolean	Indicates if an index is properly initialized.
LastInitTime	Datetime	Last time the index processor was successfully initialized. This is a global setting, not a per index setting.
MaxBloomBackfillBucketAge	String	If a bucket (warm or cold) is older than this, Splunk software does not create (or re-create) its bloom filter.
MaxConcurrentOptimizes	Integer	The number of concurrent optimize processes that can run against a hot bucket.
MaxDataSize	String	The maximum size in MB for a hot DB to reach before a roll to warm is triggered. Specifying 'auto' or 'auto_high_volume' causes Splunk software to autotune this parameter (recommended).
MaxHotBuckets	String	Maximum hot buckets that can exist per index.
MaxHotIdleSecs	Integer	Maximum life, in seconds, of a hot bucket.
MaxHotSpanSecs	Integer	Upper bound of target maximum timespan of hot/warm buckets in seconds.
MaxMemMB	Integer	The amount of memory, expressed in MB, to allocate for buffering a single tsidx file into memory before flushing to disk.
MaxMetaEntries	Integer	Sets the maximum number of unique lines in . data files in a bucket, which may help to reduce memory consumption.
MaxTime	Datetime	ISO8601 timestamp ofThis setting is valid only when tsidxWritingLevel is at 4 or higher. This maximum term limit sets an upper bound on the number of terms kept inside an in-memory hash table that serves to improve tsidx compression.
MaxTimeUnreplicatedNoAcks	Integer	Upper limit, in seconds, on how long an event can sit in raw slice. Applies only if replication is enabled for this index.
MaxTimeUnreplicatedWithAcks	Integer	Upper limit, in seconds, on how long events can sit unacknowledged in a raw slice. Applies only if you have enabled acks on forwarders and have replication enabled (with clustering).
MaxTotalDataSizeMB	Integer	The maximum size of an index (in MB). If an index grows larger than the maximum size, the oldest data is frozen.
MaxWarmDBCount	String	The maximum number of warm buckets. If this number is exceeded, the warm bucket/s with the lowest value for their latest times is moved to cold.
MemPoolMB	String	Determines how much memory is given to the indexer memory pool. This is a global setting, not a per-index setting.
MinRawFileSyncSecs	String	Specify an integer (or 'disable') for this parameter. This parameter sets how frequently splunkd forces a filesystem sync while compressing journal slices.
MinStreamGroupQueueSize	Integer	Minimum size of the queue that stores events in memory before committing them to a tsidx file.
MinTime	Datetime	ISO8601 timestamp of the oldest event time in the index.
PartialServiceMetaPeriod	Integer	Related to serviceMetaPeriod. If set, it enables metadata sync every SPECIFIED seconds, but only for records where the sync can be done efficiently in-place, without requiring a full re-write of the metadata file.
ProcessTrackerServiceInterval	Integer	Specifies, in seconds, how often the indexer checks the status of the child OS processes it launched to see if it can launch new processes for queued requests. If set to 0, the indexer checks child process status every second.
QuarantineFutureSecs	Integer	Events with timestamp of QuarantineFutureSecs newer than 'now' are dropped into quarantine bucket.
QuarantinePastSecs	Integer	Events with timestamp of quarantinePastSecs older than 'now' are dropped into quarantine bucket.
RawChunkSizeBytes	Integer	Target uncompressed size in bytes for individual raw slice in the rawdata journal of the index. 0 is not a valid value. If 0 is specified, rawChunkSizeBytes is set to the default value.
RepFactor	String	Index replication control. This parameter applies to only clustering slaves. auto = Use the master index replication configuration value. 0 = Turn off replication for this index.
RotatePeriodInSecs	Integer	How frequently (in seconds) to check if a new hot bucket needs to be created. Also, how frequently to check if there are any warm/cold buckets that should be rolled/frozen.
ServiceMetaPeriod	Integer	Defines how frequently metadata is synced to disk, in seconds.
SuppressBannerList	String	List of indexes for which we suppress 'index missing' warning banner messages. This is a global setting, not a per index setting.
Sync	String	Specifies the number of events that trigger the indexer to sync events. This is a global setting, not a per index setting.
SyncMeta	Boolean	When true, a sync operation is called before file descriptor is closed on metadata file updates. This functionality improves integrity of metadata files, especially in regards to operating system crashes/machine failures.
ThawedPath	String	An absolute path that contains the thawed (resurrected) databases for the index. Cannot be defined in terms of a volume definition.
ThawedPathExpanded	String	Absolute filepath to the thawed (resurrected) databases.
ThrottleCheckPeriod	Integer	Defines how frequently Splunk software checks for index throttling condition, in seconds.
TotalEventCount	Integer	Total number of events in the index.
TsidxDedupPostingsListMaxTermsLimit	Integer	This setting is valid only when tsidxWritingLevel is at 4 or higher. This maximum term limit sets an upper bound on the number of terms kept inside an in-memory hash table that serves to improve tsidx compression.
TstatsHomePath	String	Location to store datamodel acceleration TSIDX data for this index. If specified, it must be defined in terms of a volume definition. Path must be writable.
WarmToColdScript	String	Path to a script to run when moving data from warm to cold.
Success	Boolean	Boolean indicating whether the stored procedure was executed successfully.
ErrorCode	Integer	The error code in case the procedure is not executed successfully.
ErrorMessage	String	The error message in case the procedure is not executed successfully.

Create a saved search.

Input

Name	Type	Required	Description
Name	String	True	A name for the search
Search	String	True	The search query to save
Description	String	False	Description of this saved search.
CronSchedule	String	False	The cron schedule to execute this search. For example: */5 * * * * causes the search to execute every 5 minutes.
Disabled	Boolean	False	Indicates if this saved search is disabled.
IsScheduled	Boolean	False	Indicates if this search is to be run on a schedule.
IsVisible	Boolean	False	Indicates if this saved search appears in the visible saved search list.
RealTimeSchedule	Boolean	False	If this value is set to 1, the scheduler bases its determination of the next scheduled search execution time on the current time. If this value is set to 0, it is determined based on the last search execution time.
RunOnStartup	Boolean	False	Indicates whether this search runs on startup. If it does not run on startup, it runs at the next scheduled time.
SchedulePriority	String	False	Indicates the scheduling priority of a specific search. The allowed values are default, higher, highest.
UserContext	String	False	If user context is provided, servicesNS node will be used (/servicesNS/[UserContext]/search), otherwise it defaults to the general endpoint /services.

Result Set Columns

Name	Type	Description
Success	Boolean	Returns the success status of the created saved search.
Message	String	Warnings from the server.

Delete a data index.

Input

Name	Type	Required	Description
Name	String	True	The name of the index to delete.

Result Set Columns

Name	Type	Description
Success	Boolean	Boolean indicating whether the stored procedure was executed successfully.
ErrorCode	Integer	The error code in case the procedure is not executed successfully.
ErrorMessage	String	The error code in case the procedure is not executed successfully.

Read the results of a job given a search ID.

Input

Name	Type	Required	Description
SID	String	True	The Search ID for which to get the results.
UserContext	String	False	Set this value to make use of /servicesNS/{UserContext}/{AppContext} node. Required if AppContext is present. If left unspecified, the node /services will be utilized.
AppContext	String	False	Set this value to make use of /servicesNS/{UserContext}/{AppContext} node. Required if UserContext is present. If left unspecified, the node /services will be utilized.
Offset	Integer	False	The starting point for the results to be returned. If tis not set, defaults to 0.
Count	Integer	False	The number of results to be returned. If not set the value of Pagesize connection property will be used.
Rows@next	String	False

Result Set Columns

Name	Type	Description
*	String

Update a data index.

Input

Name	Type	Required	Description
Name	String	True	The name of the index to update.
BlockSignSize	String	False	Controls how many events make up a block for block signatures. If this is set to 0, block signing is disabled for this index. A recommended value is 100.
BucketRebuildMemoryHint	String	False	Suggestion for the bucket rebuild process for the size of the time-series (tsidx) file to make. Default value, auto, varies by the amount of physical RAM on the host.
ColdToFrozenDir	String	False	Destination path for the frozen archive. Use as an alternative to a ColdToFrozenScript.
ColdToFrozenScript	String	False	Path to the archiving script.
EnableOnlineBucketRepair	String	False	Enables asynchronous 'online fsck' bucket repair, which runs concurrently with splunk software. When enabled, you do not have to wait until buckets are repaired to start the splunk platform.
FrozenTimePeriodInSecs	String	False	Number of seconds after which indexed data rolls to frozen. Defaults to 188697600 (6 years).
MaxBloomBackfillBucketAge	String	False	Valid values are: integer[m|s|h|d] if a warm or cold bucket is older than the specified age, do not create or rebuild its bloomfilter. Specify 0 to never rebuild bloomfilters.
MaxConcurrentOptimizes	String	False	The number of concurrent optimize processes that can run against a hot bucket.
MaxDataSize	String	False	The maximum size in MB for a hot DB to reach before a roll to warm is triggered. Specifying 'auto' or 'auto_high_volume' causes Splunk software to autotune this parameter (recommended).
MaxHotBuckets	String	False	Maximum hot buckets that can exist per index.
MaxHotIdleSecs	String	False	Maximum life, in seconds, of a hot bucket.
MaxHotSpanSecs	String	False	Upper bound of target maximum timespan of hot/warm buckets in seconds.
MaxMemMB	String	False	The amount of memory, expressed in MB, to allocate for buffering a single tsidx file into memory before flushing to disk.
MaxMetaEntries	String	False	Sets the maximum number of unique lines in . data files in a bucket, which may help to reduce memory consumption.
MaxTimeUnreplicatedNoAcks	String	False	Upper limit, in seconds, on how long an event can sit in raw slice. Applies only if replication is enabled for this index.
MaxTimeUnreplicatedWithAcks	String	False	Upper limit, in seconds, on how long events can sit unacknowledged in a raw slice. Applies only if you have enabled acks on forwarders and have replication enabled (with clustering).
MaxTotalDataSizeMB	String	False	The maximum size of an index (in MB). If an index grows larger than the maximum size, the oldest data is frozen.
MaxWarmDBCount	String	False	The maximum number of warm buckets. If this number is exceeded, the warm bucket/s with the lowest value for their latest times is moved to cold.
MinRawFileSyncSecs	String	False	Specify an integer (or 'disable') for this parameter. This parameter sets how frequently splunkd forces a filesystem sync while compressing journal slices.
MinStreamGroupQueueSize	String	False	Minimum size of the queue that stores events in memory before committing them to a tsidx file.
PartialServiceMetaPeriod	String	False	Related to serviceMetaPeriod. If set, it enables metadata sync every n seconds, but only for records where the sync can be done efficiently in-place, without requiring a full re-write of the metadata file.
ProcessTrackerServiceInterval	String	False	Specifies, in seconds, how often the indexer checks the status of the child OS processes it launched to see if it can launch new processes for queued requests. If set to 0, the indexer checks child process status every second.
QuarantineFutureSecs	String	False	Events with timestamp of QuarantineFutureSecs newer than 'now' are dropped into quarantine bucket.
QuarantinePastSecs	String	False	Events with timestamp of quarantinePastSecs older than 'now' are dropped into quarantine bucket.
RawChunkSizeBytes	String	False	Target uncompressed size in bytes for individual raw slice in the rawdata journal of the index. 0 is not a valid value. If 0 is specified, rawChunkSizeBytes is set to the default value.
RepFactor	String	False	Index replication control. This parameter applies to only clustering slaves. auto = Use the master index replication configuration value. 0 = Turn off replication for this index.
RotatePeriodInSecs	String	False	How frequently (in seconds) to check if a new hot bucket needs to be created. Also, how frequently to check if there are any warm/cold buckets that should be rolled/frozen.
ServiceMetaPeriod	String	False	Defines how frequently metadata is synced to disk, in seconds.
SyncMeta	String	False	When true, a sync operation is called before file descriptor is closed on metadata file updates. This functionality improves integrity of metadata files, especially in regards to operating system crashes/machine failures.
ThrottleCheckPeriod	String	False	Defines how frequently Splunk software checks for index throttling condition, in seconds.
TstatsHomePath	String	False	Location to store datamodel acceleration TSIDX data for this index. If specified, it must be defined in terms of a volume definition. Path must be writable.
WarmToColdScript	String	False	Path to a script to run when moving data from warm to cold.

Result Set Columns

Name	Type	Description
AssureUTF8	Boolean	Boolean value indicating wheter all data retreived from the index is proper UTF8.
BlockSignSize	Integer	Controls how many events make up a block for block signatures. If this is set to 0, block signing is disabled for this index. A recommended value is 100.
BlockSignatureDatabase	String	The index that stores block signatures of events. This is a global setting, not a per index setting.
BucketRebuildMemoryHint	String	Suggestion for the bucket rebuild process for the size of the time-series (tsidx) file to make.
ColdPath	String	Filepath to the cold databases for the index.
ColdPathExpanded	String	Absoute filepath to the cold databases.
ColdToFrozenDir	String	Destination path for the frozen archive. Use as an alternative to a ColdToFrozenScript.
ColdToFrozenScript	String	Path to the archiving script.
CurrentDBSizeMB	Integer	Total size, in MB, of data stored in the index. The total incudes data in the home, cold and thawed paths.
DefaultDatabase	String	If no index destination information is available in the input data, the index shown here is the destination of such data.
EnableOnlineBucketRepair	Boolean	Enables asynchronous 'online fsck' bucket repair, which runs concurrently with splunk software. When enabled, you do not have to wait until buckets are repaired to start the splunk platform.
EnableRealtimeSearch	Boolean	Indicates if this is a real-time search. This is a global setting, not a per index setting.
FrozenTimePeriodInSecs	Integer	Number of seconds after which indexed data rolls to frozen.
HomePath	String	An absolute path that contains the hot and warm buckets for the index.
HomePathExpanded	String	An absolute filepath to the hot and warm buckets for the index.
IndexThreads	String	Number of threads used for indexing. This is a global setting, not a per index setting.
IsInternal	Boolean	Indicates if this is an internal index.
LastInitTime	Datetime	Last time the index processor was successfully initialized. This is a global setting, not a per index setting.
MaxBloomBackfillBucketAge	String	If a bucket (warm or cold) is older than this, Splunk software does not create (or re-create) its bloom filter.
MaxConcurrentOptimizes	Integer	The number of concurrent optimize processes that can run against a hot bucket.
MaxDataSize	String	The maximum size in MB for a hot DB to reach before a roll to warm is triggered. Specifying 'auto' or 'auto_high_volume' causes Splunk software to autotune this parameter (recommended).
MaxHotBuckets	String	Maximum hot buckets that can exist per index.
MaxHotIdleSecs	Integer	Maximum life, in seconds, of a hot bucket.
MaxHotSpanSecs	Integer	Upper bound of target maximum timespan of hot/warm buckets in seconds.
MaxMemMB	Integer	The amount of memory, expressed in MB, to allocate for buffering a single tsidx file into memory before flushing to disk.
MaxMetaEntries	Integer	Sets the maximum number of unique lines in . data files in a bucket, which may help to reduce memory consumption.
MaxTime	Datetime	ISO8601 timestamp ofThis setting is valid only when tsidxWritingLevel is at 4 or higher. This maximum term limit sets an upper bound on the number of terms kept inside an in-memory hash table that serves to improve tsidx compression.
MaxTimeUnreplicatedNoAcks	Integer	Upper limit, in seconds, on how long an event can sit in raw slice. Applies only if replication is enabled for this index.
MaxTimeUnreplicatedWithAcks	Integer	Upper limit, in seconds, on how long events can sit unacknowledged in a raw slice. Applies only if you have enabled acks on forwarders and have replication enabled (with clustering).
MaxTotalDataSizeMB	Integer	The maximum size of an index (in MB). If an index grows larger than the maximum size, the oldest data is frozen.
MaxWarmDBCount	String	The maximum number of warm buckets. If this number is exceeded, the warm bucket/s with the lowest value for their latest times is moved to cold.
MemPoolMB	String	Determines how much memory is given to the indexer memory pool. This is a global setting, not a per-index setting.
MinRawFileSyncSecs	String	Specify an integer (or 'disable') for this parameter. This parameter sets how frequently splunkd forces a filesystem sync while compressing journal slices.
MinStreamGroupQueueSize	Integer	Minimum size of the queue that stores events in memory before committing them to a tsidx file.
MinTime	Datetime	ISO8601 timestamp of the oldest event time in the index.
PartialServiceMetaPeriod	Integer	Related to serviceMetaPeriod. If set, it enables metadata sync every SPECIFIED seconds, but only for records where the sync can be done efficiently in-place, without requiring a full re-write of the metadata file.
ProcessTrackerServiceInterval	Integer	Specifies, in seconds, how often the indexer checks the status of the child OS processes it launched to see if it can launch new processes for queued requests. If set to 0, the indexer checks child process status every second.
QuarantineFutureSecs	Integer	Events with timestamp of QuarantineFutureSecs newer than 'now' are dropped into quarantine bucket.
QuarantinePastSecs	Integer	Events with timestamp of quarantinePastSecs older than 'now' are dropped into quarantine bucket.
RawChunkSizeBytes	Integer	Target uncompressed size in bytes for individual raw slice in the rawdata journal of the index. 0 is not a valid value. If 0 is specified, rawChunkSizeBytes is set to the default value.
RepFactor	String	Index replication control. This parameter applies to only clustering slaves. auto = Use the master index replication configuration value. 0 = Turn off replication for this index.
RotatePeriodInSecs	Integer	How frequently (in seconds) to check if a new hot bucket needs to be created. Also, how frequently to check if there are any warm/cold buckets that should be rolled/frozen.
ServiceMetaPeriod	Integer	Defines how frequently metadata is synced to disk, in seconds.
SuppressBannerList	String	List of indexes for which we suppress 'index missing' warning banner messages. This is a global setting, not a per index setting.
Sync	String	Specifies the number of events that trigger the indexer to sync events. This is a global setting, not a per index setting.
SyncMeta	Boolean	When true, a sync operation is called before file descriptor is closed on metadata file updates. This functionality improves integrity of metadata files, especially in regards to operating system crashes/machine failures.
ThawedPath	String	An absolute path that contains the thawed (resurrected) databases for the index. Cannot be defined in terms of a volume definition.
ThawedPathExpanded	String	Absolute filepath to the thawed (resurrected) databases.
ThrottleCheckPeriod	Integer	Defines how frequently Splunk software checks for index throttling condition, in seconds.
TotalEventCount	Integer	Total number of events in the index.
TsidxDedupPostingsListMaxTermsLimit	Integer	This setting is valid only when tsidxWritingLevel is at 4 or higher. This maximum term limit sets an upper bound on the number of terms kept inside an in-memory hash table that serves to improve tsidx compression.
TstatsHomePath	String	Location to store datamodel acceleration TSIDX data for this index. If specified, it must be defined in terms of a volume definition. Path must be writable.
WarmToColdScript	String	Path to a script to run when moving data from warm to cold.
Success	Boolean	Boolean indicating whether the stored procedure was executed successfully.
ErrorCode	Integer	The error code in case the procedure is not executed successfully.
ErrorMessage	String	The error message in case the procedure is not executed successfully.

Update a saved search.

Input

Name	Type	Required	Description
Name	String	True	A name for the search
Search	String	False	The search query to save
Description	String	False	Description of this saved search.
CronSchedule	String	False	The cron schedule to execute this search. For example: */5 * * * * causes the search to execute every 5 minutes.
Disabled	Boolean	False	Indicates if this saved search is disabled.
IsScheduled	Boolean	False	Indicates if this search is to be run on a schedule.
IsVisible	Boolean	False	Indicates if this saved search appears in the visible saved search list.
RealTimeSchedule	Boolean	False	If this value is set to 1, the scheduler bases its determination of the next scheduled search execution time on the current time. If this value is set to 0, it is determined based on the last search execution time.
RunOnStartup	Boolean	False	Indicates whether this search runs on startup. If it does not run on startup, it runs at the next scheduled time.
SchedulePriority	String	False	Indicates the scheduling priority of a specific search. The allowed values are default, higher, highest.

Result Set Columns

Name	Type	Description
Success	Boolean	Returns the success status of the created saved search.
Message	String	Warnings from the server.

You can query the system tables described in this section to access schema information, information on data source functionality, and batch operation statistics.

Schema Tables

The following tables return database metadata for Splunk:

• sys_catalogs: Lists the available databases.
• sys_schemas: Lists the available schemas.
• sys_tables: Lists the available tables and views.
• sys_tablecolumns: Describes the columns of the available tables and views.
• sys_procedures: Describes the available stored procedures.
• sys_procedureparameters: Describes stored procedure parameters.
• sys_keycolumns: Describes the primary and foreign keys.
• sys_indexes: Describes the available indexes.

Data Source Tables

The following tables return information about how to connect to and query the data source:

• sys_connection_props: Returns information on the available connection properties.
• sys_sqlinfo: Describes the SELECT queries that the Cloud can offload to the data source.

Query Information Tables

The following table returns query statistics for data modification queries:

• sys_identity: Returns information about batch operations or single updates.

Lists the available databases.

The following query retrieves all databases determined by the connection string:

SELECT * FROM sys_catalogs

Columns

Name	Type	Description
CatalogName	String	The database name.

Lists the available schemas.

The following query retrieves all available schemas:

          SELECT * FROM sys_schemas
          

Columns

Name	Type	Description
CatalogName	String	The database name.
SchemaName	String	The schema name.

Lists the available tables.

The following query retrieves the available tables and views:

          SELECT * FROM sys_tables
          

Columns

Name	Type	Description
CatalogName	String	The database containing the table or view.
SchemaName	String	The schema containing the table or view.
TableName	String	The name of the table or view.
TableType	String	The table type (table or view).
Description	String	A description of the table or view.
IsUpdateable	Boolean	Whether the table can be updated.

Describes the columns of the available tables and views.

The following query returns the columns and data types for the DataModels table:

SELECT ColumnName, DataTypeName FROM sys_tablecolumns WHERE TableName='DataModels' 

Columns

Name	Type	Description
CatalogName	String	The name of the database containing the table or view.
SchemaName	String	The schema containing the table or view.
TableName	String	The name of the table or view containing the column.
ColumnName	String	The column name.
DataTypeName	String	The data type name.
DataType	Int32	An integer indicating the data type. This value is determined at run time based on the environment.
Length	Int32	The storage size of the column.
DisplaySize	Int32	The designated column's normal maximum width in characters.
NumericPrecision	Int32	The maximum number of digits in numeric data. The column length in characters for character and date-time data.
NumericScale	Int32	The column scale or number of digits to the right of the decimal point.
IsNullable	Boolean	Whether the column can contain null.
Description	String	A brief description of the column.
Ordinal	Int32	The sequence number of the column.
IsAutoIncrement	String	Whether the column value is assigned in fixed increments.
IsGeneratedColumn	String	Whether the column is generated.
IsHidden	Boolean	Whether the column is hidden.
IsArray	Boolean	Whether the column is an array.
IsReadOnly	Boolean	Whether the column is read-only.
IsKey	Boolean	Indicates whether a field returned from sys_tablecolumns is the primary key of the table.
ColumnType	String	The role or classification of the column in the schema. Possible values include SYSTEM, LINKEDCOLUMN, NAVIGATIONKEY, REFERENCECOLUMN, and NAVIGATIONPARENTCOLUMN.

Lists the available stored procedures.

The following query retrieves the available stored procedures:

          SELECT * FROM sys_procedures
          

Columns

Name	Type	Description
CatalogName	String	The database containing the stored procedure.
SchemaName	String	The schema containing the stored procedure.
ProcedureName	String	The name of the stored procedure.
Description	String	A description of the stored procedure.
ProcedureType	String	The type of the procedure, such as PROCEDURE or FUNCTION.

Describes stored procedure parameters.

The following query returns information about all of the input parameters for the SelectEntries stored procedure:

SELECT * FROM sys_procedureparameters WHERE ProcedureName = 'SelectEntries' AND Direction = 1 OR Direction = 2

To include result set columns in addition to the parameters, set the IncludeResultColumns pseudo column to True:

SELECT * FROM sys_procedureparameters WHERE ProcedureName = 'SelectEntries' AND IncludeResultColumns='True'

Columns

Name	Type	Description
CatalogName	String	The name of the database containing the stored procedure.
SchemaName	String	The name of the schema containing the stored procedure.
ProcedureName	String	The name of the stored procedure containing the parameter.
ColumnName	String	The name of the stored procedure parameter.
Direction	Int32	An integer corresponding to the type of the parameter: input (1), input/output (2), or output(4). input/output type parameters can be both input and output parameters.
DataType	Int32	An integer indicating the data type. This value is determined at run time based on the environment.
DataTypeName	String	The name of the data type.
NumericPrecision	Int32	The maximum precision for numeric data. The column length in characters for character and date-time data.
Length	Int32	The number of characters allowed for character data. The number of digits allowed for numeric data.
NumericScale	Int32	The number of digits to the right of the decimal point in numeric data.
IsNullable	Boolean	Whether the parameter can contain null.
IsRequired	Boolean	Whether the parameter is required for execution of the procedure.
IsArray	Boolean	Whether the parameter is an array.
Description	String	The description of the parameter.
Ordinal	Int32	The index of the parameter.
Values	String	The values you can set in this parameter are limited to those shown in this column. Possible values are comma-separated.
SupportsStreams	Boolean	Whether the parameter represents a file that you can pass as either a file path or a stream.
IsPath	Boolean	Whether the parameter is a target path for a schema creation operation.
Default	String	The value used for this parameter when no value is specified.
SpecificName	String	A label that, when multiple stored procedures have the same name, uniquely identifies each identically-named stored procedure. If there's only one procedure with a given name, its name is simply reflected here.
IsCDataProvided	Boolean	Whether the procedure is added/implemented by CData, as opposed to being a native Splunk procedure.

Pseudo-Columns

Name	Type	Description
IncludeResultColumns	Boolean	Whether the output should include columns from the result set in addition to parameters. Defaults to False.

Describes the primary and foreign keys.

The following query retrieves the primary key for the DataModels table:

         SELECT * FROM sys_keycolumns WHERE IsKey='True' AND TableName='DataModels' 
          

Columns

Name	Type	Description
CatalogName	String	The name of the database containing the key.
SchemaName	String	The name of the schema containing the key.
TableName	String	The name of the table containing the key.
ColumnName	String	The name of the key column.
IsKey	Boolean	Whether the column is a primary key in the table referenced in the TableName field.
IsForeignKey	Boolean	Whether the column is a foreign key referenced in the TableName field.
PrimaryKeyName	String	The name of the primary key.
ForeignKeyName	String	The name of the foreign key.
ReferencedCatalogName	String	The database containing the primary key.
ReferencedSchemaName	String	The schema containing the primary key.
ReferencedTableName	String	The table containing the primary key.
ReferencedColumnName	String	The column name of the primary key.

Describes the foreign keys.

The following query retrieves all foreign keys which refer to other tables:

         SELECT * FROM sys_foreignkeys WHERE ForeignKeyType = 'FOREIGNKEY_TYPE_IMPORT'
          

Columns

Name	Type	Description
CatalogName	String	The name of the database containing the key.
SchemaName	String	The name of the schema containing the key.
TableName	String	The name of the table containing the key.
ColumnName	String	The name of the key column.
PrimaryKeyName	String	The name of the primary key.
ForeignKeyName	String	The name of the foreign key.
ReferencedCatalogName	String	The database containing the primary key.
ReferencedSchemaName	String	The schema containing the primary key.
ReferencedTableName	String	The table containing the primary key.
ReferencedColumnName	String	The column name of the primary key.
ForeignKeyType	String	Designates whether the foreign key is an import (points to other tables) or export (referenced from other tables) key.

Describes the primary keys.

The following query retrieves the primary keys from all tables and views:

         SELECT * FROM sys_primarykeys
          

Columns

Name	Type	Description
CatalogName	String	The name of the database containing the key.
SchemaName	String	The name of the schema containing the key.
TableName	String	The name of the table containing the key.
ColumnName	String	The name of the key column.
KeySeq	String	The sequence number of the primary key.
KeyName	String	The name of the primary key.

Describes the available indexes. By filtering on indexes, you can write more selective queries with faster query response times.

The following query retrieves all indexes that are not primary keys:

          SELECT * FROM sys_indexes WHERE IsPrimary='false'
          

Columns

Name	Type	Description
CatalogName	String	The name of the database containing the index.
SchemaName	String	The name of the schema containing the index.
TableName	String	The name of the table containing the index.
IndexName	String	The index name.
ColumnName	String	The name of the column associated with the index.
IsUnique	Boolean	True if the index is unique. False otherwise.
IsPrimary	Boolean	True if the index is a primary key. False otherwise.
Type	Int16	An integer value corresponding to the index type: statistic (0), clustered (1), hashed (2), or other (3).
SortOrder	String	The sort order: A for ascending or D for descending.
OrdinalPosition	Int16	The sequence number of the column in the index.

Returns information on the available connection properties and those set in the connection string.

The following query retrieves all connection properties that have been set in the connection string or set through a default value:

SELECT * FROM sys_connection_props WHERE Value <> ''

Columns

Name	Type	Description
Name	String	The name of the connection property.
ShortDescription	String	A brief description.
Type	String	The data type of the connection property.
Default	String	The default value if one is not explicitly set.
Values	String	A comma-separated list of possible values. A validation error is thrown if another value is specified.
Value	String	The value you set or a preconfigured default.
Required	Boolean	Whether the property is required to connect.
Category	String	The category of the connection property.
IsSessionProperty	String	Whether the property is a session property, used to save information about the current connection.
Sensitivity	String	The sensitivity level of the property. This informs whether the property is obfuscated in logging and authentication forms.
PropertyName	String	A camel-cased truncated form of the connection property name.
Ordinal	Int32	The index of the parameter.
CatOrdinal	Int32	The index of the parameter category.
Hierarchy	String	Shows dependent properties associated that need to be set alongside this one.
Visible	Boolean	Informs whether the property is visible in the connection UI.
ETC	String	Various miscellaneous information about the property.

Describes the SELECT query processing that the Cloud can offload to the data source.

See SQL Compliance for SQL syntax details.

Discovering the Data Source's SELECT Capabilities

Below is an example data set of SQL capabilities. Some aspects of SELECT functionality are returned in a comma-separated list if supported; otherwise, the column contains NO.

Name	Description	Possible Values
AGGREGATE_FUNCTIONS	Supported aggregation functions.	AVG, COUNT, MAX, MIN, SUM, DISTINCT
COUNT	Whether COUNT function is supported.	YES, NO
IDENTIFIER_QUOTE_OPEN_CHAR	The opening character used to escape an identifier.	[
IDENTIFIER_QUOTE_CLOSE_CHAR	The closing character used to escape an identifier.	]
SUPPORTED_OPERATORS	A list of supported SQL operators.	=, >, <, >=, <=, <>, !=, LIKE, NOT LIKE, IN, NOT IN, IS NULL, IS NOT NULL, AND, OR
GROUP_BY	Whether GROUP BY is supported, and, if so, the degree of support.	NO, NO_RELATION, EQUALS_SELECT, SQL_GB_COLLATE
OJ_CAPABILITIES	The supported varieties of outer joins supported.	NO, LEFT, RIGHT, FULL, INNER, NOT_ORDERED, ALL_COMPARISON_OPS
OUTER_JOINS	Whether outer joins are supported.	YES, NO
SUBQUERIES	Whether subqueries are supported, and, if so, the degree of support.	NO, COMPARISON, EXISTS, IN, CORRELATED_SUBQUERIES, QUANTIFIED
STRING_FUNCTIONS	Supported string functions.	LENGTH, CHAR, LOCATE, REPLACE, SUBSTRING, RTRIM, LTRIM, RIGHT, LEFT, UCASE, SPACE, SOUNDEX, LCASE, CONCAT, ASCII, REPEAT, OCTET, BIT, POSITION, INSERT, TRIM, UPPER, REGEXP, LOWER, DIFFERENCE, CHARACTER, SUBSTR, STR, REVERSE, PLAN, UUIDTOSTR, TRANSLATE, TRAILING, TO, STUFF, STRTOUUID, STRING, SPLIT, SORTKEY, SIMILAR, REPLICATE, PATINDEX, LPAD, LEN, LEADING, KEY, INSTR, INSERTSTR, HTML, GRAPHICAL, CONVERT, COLLATION, CHARINDEX, BYTE
NUMERIC_FUNCTIONS	Supported numeric functions.	ABS, ACOS, ASIN, ATAN, ATAN2, CEILING, COS, COT, EXP, FLOOR, LOG, MOD, SIGN, SIN, SQRT, TAN, PI, RAND, DEGREES, LOG10, POWER, RADIANS, ROUND, TRUNCATE
TIMEDATE_FUNCTIONS	Supported date/time functions.	NOW, CURDATE, DAYOFMONTH, DAYOFWEEK, DAYOFYEAR, MONTH, QUARTER, WEEK, YEAR, CURTIME, HOUR, MINUTE, SECOND, TIMESTAMPADD, TIMESTAMPDIFF, DAYNAME, MONTHNAME, CURRENT_DATE, CURRENT_TIME, CURRENT_TIMESTAMP, EXTRACT
REPLICATION_SKIP_TABLES	Indicates tables skipped during replication.
REPLICATION_TIMECHECK_COLUMNS	A string array containing a list of columns which will be used to check for (in the given order) to use as a modified column during replication.
IDENTIFIER_PATTERN	String value indicating what string is valid for an identifier.
SUPPORT_TRANSACTION	Indicates if the provider supports transactions such as commit and rollback.	YES, NO
DIALECT	Indicates the SQL dialect to use.
KEY_PROPERTIES	Indicates the properties which identify the uniform database.
SUPPORTS_MULTIPLE_SCHEMAS	Indicates if multiple schemas may exist for the provider.	YES, NO
SUPPORTS_MULTIPLE_CATALOGS	Indicates if multiple catalogs may exist for the provider.	YES, NO
DATASYNCVERSION	The CData Data Sync version needed to access this driver.	Standard, Starter, Professional, Enterprise
DATASYNCCATEGORY	The CData Data Sync category of this driver.	Source, Destination, Cloud Destination
SUPPORTSENHANCEDSQL	Whether enhanced SQL functionality beyond what is offered by the API is supported.	TRUE, FALSE
SUPPORTS_BATCH_OPERATIONS	Whether batch operations are supported.	YES, NO
SQL_CAP	All supported SQL capabilities for this driver.	SELECT, INSERT, DELETE, UPDATE, TRANSACTIONS, ORDERBY, OAUTH, ASSIGNEDID, LIMIT, LIKE, BULKINSERT, COUNT, BULKDELETE, BULKUPDATE, GROUPBY, HAVING, AGGS, OFFSET, REPLICATE, COUNTDISTINCT, JOINS, DROP, CREATE, DISTINCT, INNERJOINS, SUBQUERIES, ALTER, MULTIPLESCHEMAS, GROUPBYNORELATION, OUTERJOINS, UNIONALL, UNION, UPSERT, GETDELETED, CROSSJOINS, GROUPBYCOLLATE, MULTIPLECATS, FULLOUTERJOIN, MERGE, JSONEXTRACT, BULKUPSERT, SUM, SUBQUERIESFULL, MIN, MAX, JOINSFULL, XMLEXTRACT, AVG, MULTISTATEMENTS, FOREIGNKEYS, CASE, LEFTJOINS, COMMAJOINS, WITH, LITERALS, RENAME, NESTEDTABLES, EXECUTE, BATCH, BASIC, INDEX
PREFERRED_CACHE_OPTIONS	A string value specifies the preferred cacheOptions.
ENABLE_EF_ADVANCED_QUERY	Indicates if the driver directly supports advanced queries coming from Entity Framework. If not, queries will be handled client side.	YES, NO
PSEUDO_COLUMNS	A string array indicating the available pseudo columns.
MERGE_ALWAYS	If the value is true, The Merge Mode is forcibly executed in Data Sync.	TRUE, FALSE
REPLICATION_MIN_DATE_QUERY	A select query to return the replicate start datetime.
REPLICATION_MIN_FUNCTION	Allows a provider to specify the formula name to use for executing a server side min.
REPLICATION_START_DATE	Allows a provider to specify a replicate startdate.
REPLICATION_MAX_DATE_QUERY	A select query to return the replicate end datetime.
REPLICATION_MAX_FUNCTION	Allows a provider to specify the formula name to use for executing a server side max.
IGNORE_INTERVALS_ON_INITIAL_REPLICATE	A list of tables which will skip dividing the replicate into chunks on the initial replicate.
CHECKCACHE_USE_PARENTID	Indicates whether the CheckCache statement should be done against the parent key column.	TRUE, FALSE
CREATE_SCHEMA_PROCEDURES	Indicates stored procedures that can be used for generating schema files.

The following query retrieves the operators that can be used in the WHERE clause:

SELECT * FROM sys_sqlinfo WHERE Name = 'SUPPORTED_OPERATORS'

Note that individual tables may have different limitations or requirements on the WHERE clause; refer to the Data Model section for more information.

Columns

Name	Type	Description
NAME	String	A component of SQL syntax, or a capability that can be processed on the server.
VALUE	String	Detail on the supported SQL or SQL syntax.

Returns information about attempted modifications.

The following query retrieves the Ids of the modified rows in a batch operation:

         SELECT * FROM sys_identity
          

Columns

Name	Type	Description
Id	String	The database-generated Id returned from a data modification operation.
Batch	String	An identifier for the batch. 1 for a single operation.
Operation	String	The result of the operation in the batch: INSERTED, UPDATED, or DELETED.
Message	String	SUCCESS or an error message if the update in the batch failed.

Describes the available system information.

The following query retrieves all columns:

SELECT * FROM sys_information

Columns

Name	Type	Description
Product	String	The name of the product.
Version	String	The version number of the product.
Datasource	String	The name of the datasource the product connects to.
NodeId	String	The unique identifier of the machine where the product is installed.
HelpURL	String	The URL to the product's help documentation.
License	String	The license information for the product. (If this information is not available, the field may be left blank or marked as 'N/A'.)
Location	String	The file path location where the product's library is stored.
Environment	String	The version of the environment or rumtine the product is currently running under.
DataSyncVersion	String	The tier of CData Sync required to use this connector.
DataSyncCategory	String	The category of CData Sync functionality (e.g., Source, Destination).

The connection string properties are the various options that can be used to establish a connection. This section provides a complete list of the options you can configure in the connection string for this provider. Click the links for further details.

For more information on establishing a connection, see Establishing a Connection.

Authentication

---

Property	Description
AuthScheme	Whether to use Basic Authentication, AccessToken or HTTPEventCollectorToken Authentication when connecting to Splunk.
AccessToken	The Access Token used for accessing your Splunk account.
HTTPEventCollectorToken	The HTTP Event Collector Token is used for accessing the HTTP Event Controller feature on your Splunk account.
URL	The URL to your Splunk endpoint.
User	Specifies the authenticating user's user ID.
Password	Specifies the authenticating user's password.

SSL

---

Property	Description
SSLServerCert	Specifies the certificate to be accepted from the server when connecting using TLS/SSL.

Logging

---

Property	Description
Verbosity	Specifies the verbosity level of the log file, which controls the amount of detail logged. Supported values range from 1 to 5.

Schema

---

Property	Description
BrowsableSchemas	Optional setting that restricts the schemas reported to a subset of all available schemas. For example, BrowsableSchemas=SchemaA,SchemaB,SchemaC .

Miscellaneous

---

Property	Description
ExcludeObjectTypes	A comma delimited list of object types to exclude during metadata retrieval.
IncludeInternalFields	Whether or not the CData ADO.NET Provider for Splunk should push the internal fields. These fields include: user, eventtype, etc.
MaxRows	Specifies the maximum number of rows returned for queries that do not include either aggregation or GROUP BY.
MaxThreads	Specifies the number of concurrent requests. Only used when UseJobs is true.
Pagesize	Specifies the maximum number of records per page the provider returns when requesting data from Splunk.
PseudoColumns	Specifies the pseudocolumns to expose as table columns, expressed as a string in the format 'TableName=ColumnName;TableName=ColumnName'.
RowScanDepth	Set this property to control the number of rows scanned when TypeDetectionScheme is set to RowScan.
Timeout	Specifies the maximum time, in seconds, that the provider waits for a server response before throwing a timeout error.
TypeDetectionScheme	Determines how to determine the data type of columns.
UseJobs	Specifies whether to use the jobs endpoint instead of the export endpoint. If set to true, the maximum number of returned rows is configured Splunk's limit.conf file.

This section provides a complete list of the Authentication properties you can configure in the connection string for this provider.

---

Property	Description
AuthScheme	Whether to use Basic Authentication, AccessToken or HTTPEventCollectorToken Authentication when connecting to Splunk.
AccessToken	The Access Token used for accessing your Splunk account.
HTTPEventCollectorToken	The HTTP Event Collector Token is used for accessing the HTTP Event Controller feature on your Splunk account.
URL	The URL to your Splunk endpoint.
User	Specifies the authenticating user's user ID.
Password	Specifies the authenticating user's password.

Whether to use Basic Authentication, AccessToken or HTTPEventCollectorToken Authentication when connecting to Splunk.

Possible Values

Basic, AccessToken, HTTPEventCollectorToken

Data Type

string

Default Value

"Basic"

Remarks

• Basic: Set this to perform Basic authentication.
• AccessToken: Set this to perform Token Based Authentication via the AccessToken property.
• HTTPEventCollectorToken: Set this to perform Token Based Authentication for Event Controller via the HTTPEventCollectorToken property.

The Access Token used for accessing your Splunk account.

Data Type

string

Default Value

""

Remarks

The Access Token used for accessing your Splunk account.

The HTTP Event Collector Token is used for accessing the HTTP Event Controller feature on your Splunk account.

Data Type

string

Default Value

""

Remarks

The HTTP Event Collector Token is used for accessing the HTTP Event Controller feature on your Splunk account.

The URL to your Splunk endpoint.

Data Type

string

Default Value

""

Remarks

The URL to your Splunk endpoint; for example, https://yoursitename.splunk.com:8089.

The port should be set to the Splunk management port (default 8089).

Specifies the authenticating user's user ID.

Data Type

string

Default Value

""

Remarks

The authenticating server requires both User and Password to validate the user's identity.

Specifies the authenticating user's password.

Data Type

string

Default Value

""

Remarks

The authenticating server requires both User and Password to validate the user's identity.

This section provides a complete list of the SSL properties you can configure in the connection string for this provider.

---

Property	Description
SSLServerCert	Specifies the certificate to be accepted from the server when connecting using TLS/SSL.

Specifies the certificate to be accepted from the server when connecting using TLS/SSL.

Data Type

string

Default Value

""

Remarks

If you are using a TLS/SSL connection, use this property to specify the TLS/SSL certificate to be accepted from the server. If you specify a value for this property, all other certificates that are not trusted by the machine are rejected.

This property can take the following forms:

Description	Example
A full PEM Certificate (example shortened for brevity)	-----BEGIN CERTIFICATE----- MIIChTCCAe4CAQAwDQYJKoZIhv......Qw== -----END CERTIFICATE-----
A path to a local file containing the certificate	C:\cert.cer
The public key (example shortened for brevity)	-----BEGIN RSA PUBLIC KEY----- MIGfMA0GCSq......AQAB -----END RSA PUBLIC KEY-----
The MD5 Thumbprint (hex values can also be either space- or colon-separated)	ecadbdda5a1529c58a1e9e09828d70e4
The SHA1 Thumbprint (hex values can also be either space- or colon-separated)	34a929226ae0819f2ec14b4a3d904f801cbb150d

Note: It is possible to use '*' to signify that all certificates should be accepted, but due to security concerns this is not recommended.

This section provides a complete list of the Logging properties you can configure in the connection string for this provider.

---

Property	Description
Verbosity	Specifies the verbosity level of the log file, which controls the amount of detail logged. Supported values range from 1 to 5.

Specifies the verbosity level of the log file, which controls the amount of detail logged. Supported values range from 1 to 5.

Data Type

string

Default Value

"1"

Remarks

This property defines the level of detail the Cloud includes in the log file. Higher verbosity levels increase the detail of the logged information, but may also result in larger log files and slower performance due to the additional data being captured.

The default verbosity level is 1, which is recommended for regular operation. Higher verbosity levels are primarily intended for debugging purposes. For more information on each level, refer to Logging.

When combined with the LogModules property, Verbosity can refine logging to specific categories of information.

This section provides a complete list of the Schema properties you can configure in the connection string for this provider.

---

Property	Description
BrowsableSchemas	Optional setting that restricts the schemas reported to a subset of all available schemas. For example, BrowsableSchemas=SchemaA,SchemaB,SchemaC .

Optional setting that restricts the schemas reported to a subset of all available schemas. For example, BrowsableSchemas=SchemaA,SchemaB,SchemaC .

Data Type

string

Default Value

""

Remarks

Listing all available database schemas can take extra time, thus degrading performance. Providing a list of schemas in the connection string saves time and improves performance.

This section provides a complete list of the Miscellaneous properties you can configure in the connection string for this provider.

---

Property	Description
ExcludeObjectTypes	A comma delimited list of object types to exclude during metadata retrieval.
IncludeInternalFields	Whether or not the CData ADO.NET Provider for Splunk should push the internal fields. These fields include: user, eventtype, etc.
MaxRows	Specifies the maximum number of rows returned for queries that do not include either aggregation or GROUP BY.
MaxThreads	Specifies the number of concurrent requests. Only used when UseJobs is true.
Pagesize	Specifies the maximum number of records per page the provider returns when requesting data from Splunk.
PseudoColumns	Specifies the pseudocolumns to expose as table columns, expressed as a string in the format 'TableName=ColumnName;TableName=ColumnName'.
RowScanDepth	Set this property to control the number of rows scanned when TypeDetectionScheme is set to RowScan.
Timeout	Specifies the maximum time, in seconds, that the provider waits for a server response before throwing a timeout error.
TypeDetectionScheme	Determines how to determine the data type of columns.
UseJobs	Specifies whether to use the jobs endpoint instead of the export endpoint. If set to true, the maximum number of returned rows is configured Splunk's limit.conf file.

A comma delimited list of object types to exclude during metadata retrieval.

Data Type

string

Default Value

""

Remarks

A comma delimited list of object types to exclude during metadata retrieval. Supported object types: Report, Dataset, Indexes.

Whether or not the CData ADO.NET Provider for Splunk should push the internal fields. These fields include: user, eventtype, etc.

Data Type

bool

Default Value

false

Remarks

Whether or not the CData Cloud should push the internal fields. These fields include: user, eventtype, etc.

Specifies the maximum number of rows returned for queries that do not include either aggregation or GROUP BY.

Data Type

int

Default Value

-1

Remarks

The default value for this property, -1, means that no row limit is enforced unless the query explicitly includes a LIMIT clause. (When a query includes a LIMIT clause, the value specified in the query takes precedence over the MaxRows setting.)

Setting MaxRows to a whole number greater than 0 ensures that queries do not return excessively large result sets by default.

This property is useful for optimizing performance and preventing excessive resource consumption when executing queries that could otherwise return very large datasets.

Specifies the number of concurrent requests. Only used when UseJobs is true.

Data Type

string

Default Value

"5"

Remarks

This property allows you to issue multiple requests simultaneously, thereby improving performance. Default value is 5 threads. Setting a higher value can result in OutOfMemory issues.

Specifies the maximum number of records per page the provider returns when requesting data from Splunk.

Data Type

int

Default Value

10000

Remarks

When processing a query, instead of requesting all of the queried data at once from Splunk, the Cloud can request the queried data in pieces called pages.

This connection property determines the maximum number of results that the Cloud requests per page.

Note: Setting large page sizes may improve overall query execution time, but doing so causes the Cloud to use more memory when executing queries and risks triggering a timeout.

Specifies the pseudocolumns to expose as table columns, expressed as a string in the format 'TableName=ColumnName;TableName=ColumnName'.

Data Type

string

Default Value

""

Remarks

This property allows you to define which pseudocolumns the Cloud exposes as table columns.

To specify individual pseudocolumns, use the following format:

Table1=Column1;Table1=Column2;Table2=Column3

To include all pseudocolumns for all tables use:

*=*

Set this property to control the number of rows scanned when TypeDetectionScheme is set to RowScan.

Data Type

string

Default Value

"50"

Remarks

Determines the number of rows used to determine the column data types.

Setting a high value may decrease performance. Setting a low value may prevent the data type from being determined properly, especially when there is null data.

Specifies the maximum time, in seconds, that the provider waits for a server response before throwing a timeout error.

Data Type

int

Default Value

60

Remarks

The timeout applies to each individual communication with the server rather than the entire query or operation. For example, a query could continue running beyond 60 seconds if each paging call completes within the timeout limit.

Timeout is set to 60 seconds by default. To disable timeouts, set this property to 0.

Disabling the timeout allows operations to run indefinitely until they succeed or fail due to other conditions such as server-side timeouts, network interruptions, or resource limits on the server.

Note: Use this property cautiously to avoid long-running operations that could degrade performance or result in unresponsive behavior.

Determines how to determine the data type of columns.

Possible Values

None, RowScan

Data Type

string

Default Value

"RowScan"

Remarks

None	Setting TypeDetectionScheme to None will return all columns as the string type.
RowScan	Setting TypeDetectionScheme to RowScan will scan rows to heuristically determine the data type. The RowScanDepth determines the number of rows to be scanned.

Specifies whether to use the jobs endpoint instead of the export endpoint. If set to true, the maximum number of returned rows is configured Splunk's limit.conf file.

Data Type

bool

Default Value

false

Remarks

Whether to use the jobs endpoint instead of the export endpoint. While Jobs generally provide higher performance, the initial response time may be longer. If a Timeout error occurs, set the Timeout connection property to a higher value.

LZMA from 7Zip LZMA SDK

LZMA SDK is placed in the public domain.

Anyone is free to copy, modify, publish, use, compile, sell, or distribute the original LZMA SDK code, either in source code form or as a compiled binary, for any purpose, commercial or non-commercial, and by any means.

LZMA2 from XZ SDK

Version 1.9 and older are in the public domain.

Xamarin.Forms

Xamarin SDK

The MIT License (MIT)

Copyright (c) .NET Foundation Contributors

All rights reserved.

Permission is hereby granted, free of charge, to any person obtaining a copy of this software and associated documentation files (the "Software"), to deal in the Software without restriction, including without limitation the rights to use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of the Software, and to permit persons to whom the Software is furnished to do so, subject to the following conditions:

The above copyright notice and this permission notice shall be included in all copies or substantial portions of the Software.

THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.

NSIS 3.10

Copyright (C) 1999-2025 Contributors THE ACCOMPANYING PROGRAM IS PROVIDED UNDER THE TERMS OF THIS COMMON PUBLIC LICENSE ("AGREEMENT"). ANY USE, REPRODUCTION OR DISTRIBUTION OF THE PROGRAM CONSTITUTES RECIPIENT'S ACCEPTANCE OF THIS AGREEMENT.

1. DEFINITIONS

"Contribution" means:

a) in the case of the initial Contributor, the initial code and documentation distributed under this Agreement, and b) in the case of each subsequent Contributor:

i) changes to the Program, and

ii) additions to the Program;

where such changes and/or additions to the Program originate from and are distributed by that particular Contributor. A Contribution 'originates' from a Contributor if it was added to the Program by such Contributor itself or anyone acting on such Contributor's behalf. Contributions do not include additions to the Program which: (i) are separate modules of software distributed in conjunction with the Program under their own license agreement, and (ii) are not derivative works of the Program.

"Contributor" means any person or entity that distributes the Program.

"Licensed Patents " mean patent claims licensable by a Contributor which are necessarily infringed by the use or sale of its Contribution alone or when combined with the Program.

"Program" means the Contributions distributed in accordance with this Agreement.

"Recipient" means anyone who receives the Program under this Agreement, including all Contributors.

2. GRANT OF RIGHTS

a) Subject to the terms of this Agreement, each Contributor hereby grants Recipient a non-exclusive, worldwide, royalty-free copyright license to reproduce, prepare derivative works of, publicly display, publicly perform, distribute and sublicense the Contribution of such Contributor, if any, and such derivative works, in source code and object code form.

b) Subject to the terms of this Agreement, each Contributor hereby grants Recipient a non-exclusive, worldwide, royalty-free patent license under Licensed Patents to make, use, sell, offer to sell, import and otherwise transfer the Contribution of such Contributor, if any, in source code and object code form. This patent license shall apply to the combination of the Contribution and the Program if, at the time the Contribution is added by the Contributor, such addition of the Contribution causes such combination to be covered by the Licensed Patents. The patent license shall not apply to any other combinations which include the Contribution. No hardware per se is licensed hereunder.

c) Recipient understands that although each Contributor grants the licenses to its Contributions set forth herein, no assurances are provided by any Contributor that the Program does not infringe the patent or other intellectual property rights of any other entity. Each Contributor disclaims any liability to Recipient for claims brought by any other entity based on infringement of intellectual property rights or otherwise. As a condition to exercising the rights and licenses granted hereunder, each Recipient hereby assumes sole responsibility to secure any other intellectual property rights needed, if any. For example, if a third party patent license is required to allow Recipient to distribute the Program, it is Recipient's responsibility to acquire that license before distributing the Program.

d) Each Contributor represents that to its knowledge it has sufficient copyright rights in its Contribution, if any, to grant the copyright license set forth in this Agreement.

3. REQUIREMENTS

A Contributor may choose to distribute the Program in object code form under its own license agreement, provided that:

a) it complies with the terms and conditions of this Agreement; and

b) its license agreement:

i) effectively disclaims on behalf of all Contributors all warranties and conditions, express and implied, including warranties or conditions of title and non-infringement, and implied warranties or conditions of merchantability and fitness for a particular purpose;

ii) effectively excludes on behalf of all Contributors all liability for damages, including direct, indirect, special, incidental and consequential damages, such as lost profits;

iii) states that any provisions which differ from this Agreement are offered by that Contributor alone and not by any other party; and

iv) states that source code for the Program is available from such Contributor, and informs licensees how to obtain it in a reasonable manner on or through a medium customarily used for software exchange.

When the Program is made available in source code form:

a) it must be made available under this Agreement; and

b) a copy of this Agreement must be included with each copy of the Program.

Contributors may not remove or alter any copyright notices contained within the Program.

Each Contributor must identify itself as the originator of its Contribution, if any, in a manner that reasonably allows subsequent Recipients to identify the originator of the Contribution.

4. COMMERCIAL DISTRIBUTION

Commercial distributors of software may accept certain responsibilities with respect to end users, business partners and the like. While this license is intended to facilitate the commercial use of the Program, the Contributor who includes the Program in a commercial product offering should do so in a manner which does not create potential liability for other Contributors. Therefore, if a Contributor includes the Program in a commercial product offering, such Contributor ("Commercial Contributor") hereby agrees to defend and indemnify every other Contributor ("Indemnified Contributor") against any losses, damages and costs (collectively "Losses") arising from claims, lawsuits and other legal actions brought by a third party against the Indemnified Contributor to the extent caused by the acts or omissions of such Commercial Contributor in connection with its distribution of the Program in a commercial product offering. The obligations in this section do not apply to any claims or Losses relating to any actual or alleged intellectual property infringement. In order to qualify, an Indemnified Contributor must: a) promptly notify the Commercial Contributor in writing of such claim, and b) allow the Commercial Contributor to control, and cooperate with the Commercial Contributor in, the defense and any related settlement negotiations. The Indemnified Contributor may participate in any such claim at its own expense.

For example, a Contributor might include the Program in a commercial product offering, Product X. That Contributor is then a Commercial Contributor. If that Commercial Contributor then makes performance claims, or offers warranties related to Product X, those performance claims and warranties are such Commercial Contributor's responsibility alone. Under this section, the Commercial Contributor would have to defend claims against the other Contributors related to those performance claims and warranties, and if a court requires any other Contributor to pay any damages as a result, the Commercial Contributor must pay those damages.

5. NO WARRANTY

EXCEPT AS EXPRESSLY SET FORTH IN THIS AGREEMENT, THE PROGRAM IS PROVIDED ON AN "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED INCLUDING, WITHOUT LIMITATION, ANY WARRANTIES OR CONDITIONS OF TITLE, NON-INFRINGEMENT, MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. Each Recipient is solely responsible for determining the appropriateness of using and distributing the Program and assumes all risks associated with its exercise of rights under this Agreement, including but not limited to the risks and costs of program errors, compliance with applicable laws, damage to or loss of data, programs or equipment, and unavailability or interruption of operations.

6. DISCLAIMER OF LIABILITY

EXCEPT AS EXPRESSLY SET FORTH IN THIS AGREEMENT, NEITHER RECIPIENT NOR ANY CONTRIBUTORS SHALL HAVE ANY LIABILITY FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING WITHOUT LIMITATION LOST PROFITS), HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OR DISTRIBUTION OF THE PROGRAM OR THE EXERCISE OF ANY RIGHTS GRANTED HEREUNDER, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.

7. GENERAL

If any provision of this Agreement is invalid or unenforceable under applicable law, it shall not affect the validity or enforceability of the remainder of the terms of this Agreement, and without further action by the parties hereto, such provision shall be reformed to the minimum extent necessary to make such provision valid and enforceable.

If Recipient institutes patent litigation against a Contributor with respect to a patent applicable to software (including a cross-claim or counterclaim in a lawsuit), then any patent licenses granted by that Contributor to such Recipient under this Agreement shall terminate as of the date such litigation is filed. In addition, if Recipient institutes patent litigation against any entity (including a cross-claim or counterclaim in a lawsuit) alleging that the Program itself (excluding combinations of the Program with other software or hardware) infringes such Recipient's patent(s), then such Recipient's rights granted under Section 2(b) shall terminate as of the date such litigation is filed.

All Recipient's rights under this Agreement shall terminate if it fails to comply with any of the material terms or conditions of this Agreement and does not cure such failure in a reasonable period of time after becoming aware of such noncompliance. If all Recipient's rights under this Agreement terminate, Recipient agrees to cease use and distribution of the Program as soon as reasonably practicable. However, Recipient's obligations under this Agreement and any licenses granted by Recipient relating to the Program shall continue and survive.

Everyone is permitted to copy and distribute copies of this Agreement, but in order to avoid inconsistency the Agreement is copyrighted and may only be modified in the following manner. The Agreement Steward reserves the right to publish new versions (including revisions) of this Agreement from time to time. No one other than the Agreement Steward has the right to modify this Agreement. IBM is the initial Agreement Steward. IBM may assign the responsibility to serve as the Agreement Steward to a suitable separate entity. Each new version of the Agreement will be given a distinguishing version number. The Program (including Contributions) may always be distributed subject to the version of the Agreement under which it was received. In addition, after a new version of the Agreement is published, Contributor may elect to distribute the Program (including its Contributions) under the new version. Except as expressly stated in Sections 2(a) and 2(b) above, Recipient receives no rights or licenses to the intellectual property of any Contributor under this Agreement, whether expressly, by implication, estoppel or otherwise. All rights in the Program not expressly granted under this Agreement are reserved.

This Agreement is governed by the laws of the State of New York and the intellectual property laws of the United States of America. No party to this Agreement will bring a legal action under this Agreement more than one year after the cause of action arose. Each party waives its rights to a jury trial in any resulting litigation.