Adding a Connection to PostgreSQL

To add a connection to PostgreSQL:

1. In the application console, navigate to the Connections page.
2. At the Add Connections panel, select the icon for the connection you want to add.
3. If the PostgreSQL icon is not available, click the Add More icon to download and install the PostgreSQL connector from the CData site.

For required properties, see the Settings tab.

For connection properties that are not typically required, see the Advanced tab.

Connecting to PostgreSQL

The following connection properties are usually required to connect to PostgreSQL.

• Server: The host name or IP of the server hosting the PostgreSQL database.
• User: The user which will be used to authenticate with the PostgreSQL server.

You can also optionally set the following:

• Database: The database to connect to when connecting to the PostgreSQL Server. If this is not set, the user's default database will be used.
• Port: The port of the server hosting the PostgreSQL database. 5432 by default.

Standard

Unless you select another scheme, Password is the default authentication mechanism the Sync App uses to connect to PostgreSQL Server.

To use standard authentication, set the AuthScheme to Password to connect to PostgreSQL with login credentials.

Then, to authenticate, set the Password associated with the authenticating user.

pg_hba.conf Auth Schemes

There are subtypes of the Password authentication scheme supported by the Sync App which must be enabled in the pg_hba.conf file on the PostgreSQL server.

See the PostgreSQL documentation for more information about authentication setup on the PostgreSQL Server.

MD5

The Sync App can authenticate by verifying the password with MD5. This authentication method must be enabled by setting the auth-method in the pg_hba.conf file to md5.

SASL

The Sync App can authenticate by verifying the password with SASL (particularly, SCRAM-SHA-256). This authentication method must be enabled by setting the auth-method in the pg_hba.conf file to scram-sha-256.

Azure

Methods available for connecting to PostgreSQL with Microsoft Azure include:

• Azure Active Directory OAuth
• Azure Active Directory Password
• Azure Active Directory MSI

Azure AD

Azure AD is Microsoft’s multi-tenant, cloud-based directory and identity management service. It is user-based authentication that requires that you set AuthScheme to AzureAD.

OAuth

CData provides an embedded OAuth application that simplifies authentication. You can, however, create a custom application for authentication. For information about creating a custom application and reasons for doing so, see Creating a Custom OAuth Application.

For authentication, the only difference between using the CData-provided (embedded) application and creating your own custom application is that you must set two additional connection properties in the Advanced Tab when using custom OAuth applications.

Before you connect, for Custom Azure AD applications only, set the following variables:

• OAuthClientId: The client Id assigned when you registered your custom OAuth application.
• OAuthClientSecret: The client secret assigned when you registered your custom OAuth application.

Click Connect to PostgreSQL to open the OAuth endpoint in your default browser. Log in and grant permissions to the application.

The driver then completes the OAuth process as follows:

• Extracts the access token from the callback URL.
• Obtains a new access token when the old one expires.
• Saves OAuth values so that they persist across connections.

Note: Azure PostgreSQL Flexible servers are not supported. Only Azure PostgreSQL Single Server instances are supported.

Ensure that an Active Directory admin has been set in the Azure PostgreSQL instance (Active Directory admin -> Set admin).

Next, set the following to connect:

• User: Set this to the Azure Active Directory user you granted access to the Azure PostgreSQL server.
• AzureTenant: Set this to the Directory (tenant) ID, found on the Overview page of the OAuth app used to authenticate to PostgreSQL on Azure.
• Server: Set this to the Server name of the Azure PostgreSQL server, found on the Overview page of the Azure PostgreSQL instance.
• Database: Set this to the database you'd like to connect to on the Azure PostgreSQL instance.
• Port: The port of the server hosting the PostgreSQL database. 5432 by default.
• OAuthClientId: Set this to the Application (client) ID, found on the Overview page of the OAuth app used to authenticate to PostgreSQL on Azure.
• OAuthClientSecret: Set this to the Value of the client secret, generated at the Certificates and secrets page of the authenticating OAuth app.
• CallbackURL: Set this to the Redirect URI you specified during the creation of your OAuth app.

EC2 Instances

Set AuthScheme to AwsEC2Roles.

If you are using the Sync App from an EC2 Instance and have an IAM Role assigned to the instance, you can use the IAM Role to authenticate. Since the Sync App automatically obtains your IAM Role credentials and authenticates with them, it is not necessary to specify AWSAccessKey and AWSSecretKey.

If you are also using an IAM role to authenticate, you must additionally specify the following:

• AWSRoleARN: Specify the Role ARN for the role you'd like to authenticate with. This will cause the Sync App to attempt to retrieve credentials for the specified role.
• AWSExternalId (optional): Only required if you are assuming a role in another AWS account.

IMDSv2 Support

The PostgreSQL Sync App now supports IMDSv2. Unlike IMDSv1, the new version requires an authentication token. Endpoints and response are the same in both versions.

In IMDSv2, the PostgreSQL Sync App first attempts to retrieve the IMDSv2 metadata token and then uses it to call AWS metadata endpoints. If it is unable to retrieve the token, the Sync App reverts to IMDSv1.

Azure Password

Set AuthScheme to AzurePassword.

To connect using your Azure credentials directly, specify the following connection properties:

• AuthScheme: Set this to AzurePassword.
• User: Set this to your user account you use to connect to Azure.
• Password: Set this to the password you use to connect to Azure.
• AzureTenant: Set this to the Directory (tenant) ID, found on the Overview page of the OAuth app used to authenticate to PostgreSQL on Azure.
• Server: Set this to the Server name of the Azure PostgreSQL server, found on the Overview page of the Azure PostgreSQL instance.
• Database: Set this to the database you'd like to connect to on the Azure PostgreSQL instance.
• Port: The port of the server hosting the PostgreSQL database. 5432 by default.

GCP Service Account

To authenticate to your PostgreSQL Google SQL Cloud Instance using a service account, you must create a new service account and have a copy of the accounts certificate. If you do not already have a service account, you can create one by following the procedure in Creating a Custom OAuth Application. For a JSON file, set these properties:

• AuthScheme: Set this to GCPServiceAccount.
• InitiateOAuth: Set this to GETANDREFRESH.
• OAuthJWTCertType: Set this to GOOGLEJSON.
• OAuthJWTCert: Set this to the path to the .json file provided by Google.
• OAuthJWTSubject: (optional) Only set this value if the service account is part of a GSuite domain and you want to enable delegation. The value of this property should be the email address of the user whose data you want to access.

For a PFX file, set these properties instead:

• AuthScheme: Set this to GCPServiceAccount.
• InitiateOAuth: Set this to GETANDREFRESH.
• OAuthJWTCertType: Set this to PFXFILE.
• OAuthJWTCert: Set this to the path to the .pfx file provided by Google.
• OAuthJWTCertPassword: (optional) Set this to the .pfx file password. In most cases you must provide this since Google encrypts PFX certificates.
• OAuthJWTCertSubject: (optional) Set this only if you are using a OAuthJWTCertType which stores multiple certificates. Should not be set for PFX certificates generated by Google.
• OAuthJWTIssuer: Set this to the email address of the service account. This address will usually include the domain iam.gserviceaccount.com.
• OAuthJWTSubject: (optional) Only set this value if the service account is part of a GSuite domain and you want to enable delegation. The value of this property should be the email address of the user whose data you want to access.

Managed Service Identity (MSI)

If you are running PostgreSQL on an Azure VM and want to leverage MSI to connect, set AuthScheme to AzureMSI.

User-Managed Identities

To obtain a token for a managed identity, use the OAuthClientId property to specify the managed identity's "client_id".

When your VM has multiple user-assigned managed identities, you must also specify OAuthClientId.

Amazon Web Services

Obtain AWS Keys

To obtain the credentials for an IAM user:

1. Sign into the IAM console.
2. In the navigation pane, select Users.
3. To create or manage the access keys for a user, select the user and then go to the Security Credentials tab.

To obtain the credentials for your AWS root account:

1. Sign into the AWS Management console with the credentials for your root account.
2. Select your account name or number.
3. In the menu that displays, select My Security Credentials.
4. To manage or create root account access keys, click Continue to Security Credentials and expand the "Access Keys" section.

AWS IAM Roles

Set AuthScheme to AwsIAMRoles.

In many situations, it may be preferable to use an IAM role for authentication instead of the direct security credentials of an AWS root user. If you are specifying the AWSAccessKey and AWSSecretKey of an AWS root user, you may not use roles.

To authenticate as an AWS role, set these properties:

• AuthScheme: Set this to AwsIAMRoles.
• User: Set this to the AWS-hosted PostgreSQL user that you granted the aws_iam role to. This user should map to an AWS user that has a role containing a policy which includes the rds-db:connect permission.
• AWSRoleARN: Specify the Role ARN for the role attached to the authenticating IAM user. This will cause the Sync App to attempt to retrieve credentials for the specified role.
• AWSAccessKey: The access key of the authenticating IAM user.
• AWSSecretKey: The secret key of the authenticating IAM user.

Kerberos

The authentication with Kerberos is initiated by PostgreSQL Server when the CData Sync App is trying to connect to it. You should setup Kerberos on the PostgreSQL Server to activate this authentication method. Once you have Kerberos authentication setup on the PostgreSQL Server, see Using Kerberos for details on how to authenticate with Kerberos by the Sync App.

Kerberos

Authenticating to PostgreSQL via Kerberos requires you to define authentication properties and to choose how Kerberos should retrieve authentication tickets.

Retrieve Kerberos Tickets

Kerberos tickets are used to authenticate the requester's identity. The use of tickets instead of formal logins/passwords eliminates the need to store passwords locally or send them over a network. Users are reauthenticated (tickets are refreshed) whenever they log in at their local computer or enter kinit USER at the command prompt.

The Sync App provides three ways to retrieve the required Kerberos ticket, depending on whether or not the KRB5CCNAME and/or KerberosKeytabFile variables exist in your environment.

MIT Kerberos Credential Cache File

This option enables you to use the MIT Kerberos Ticket Manager or kinit command to get tickets. With this option there is no need to set the User or Password connection properties.

This option requires that KRB5CCNAME has been created in your system.

To enable ticket retrieval via MIT Cerberos Credential Cache Files:

1. Ensure that the KRB5CCNAME variable is present in your environment.
2. Set KRB5CCNAME to a path that points to your credential cache file. (For example, C:\krb_cache\krb5cc_0 or /tmp/krb5cc_0.) The credential cache file is created when you use the MIT Kerberos Ticket Manager to generate your ticket.
3. To obtain a ticket:
   1. Open the MIT Kerberos Ticket Manager application.
   2. Click Get Ticket.
   3. Enter your principal name and password.
   4. Click OK.

   If the ticket is successfully obtained, the ticket information appears in Kerberos Ticket Manager and is stored in the credential cache file.

The Sync App uses the cache file to obtain the Kerberos ticket to connect to PostgreSQL.

Note: If you would prefer not to edit KRB5CCNAME, you can use the KerberosTicketCache property to set the file path manually. After this is set, the Sync App uses the specified cache file to obtain the Kerberos ticket to connect to PostgreSQL.

Keytab File

If your environment lacks the KRB5CCNAME environment variable, you can retrieve a Kerberos ticket using a Keytab File.

To use this method, set the User property to the desired username, and set the KerberosKeytabFile property to a file path pointing to the keytab file associated with the user.

User and Password

If your environment lacks the KRB5CCNAME environment variable and the KerberosKeytabFile property has not been set, you can retrieve a ticket using a user and password combination.

To use this method, set the User and Password properties to the user/password combination that you use to authenticate with PostgreSQL.

Enabling Cross-Realm Authentication

More complex Kerberos environments can require cross-realm authentication where multiple realms and KDC servers are used. For example, they might use one realm/KDC for user authentication, and another realm/KDC for obtaining the service ticket.

To enable this kind of cross-realm authentication, set the KerberosRealm and KerberosKDC properties to the values required for user authentication. Also, set the KerberosServiceRealm and KerberosServiceKDC properties to the values required to obtain the service ticket.

CData Sync can use logical replication configured in PostgreSql to incrementally update your destination table. PostgreSQL uses logical decoding to surface the contents of the write-ahead logs, which track data changes in the database, into a readable format. Those changes are read by Sync and pushed into the destination.

Enable Logical Replication for CData Sync

1. Ensure the wal_level is set to logical in in your postgres database. You can set wal_level=logicial in the postgresql.conf file.
2. Create a logical replication slot for Sync.
   

   	SELECT pg_create_logical_replication_slot('cdatasync_replication_slot', 'test_decoding');

   Note: The slot name'cdatasync_replication_slot' is an example and can be susbstituted with any name. You will need this slot name when creating your Job in Sync. It is important that this slot is only used by Sync since changes are consumed when reading from the slot.
3. Ensure that the user connecting from Sync has permision to read the replication slot.
   

   	ALTER ROLE <postgres-user> WITH REPLICATION;

4. In Sync, create a job with a PostgreSQL sources. After selecting the "Change Data Capture" option, enter the replication slot name.

Deletion Behavior

Logical Replication allows Sync to track deleted records when the source table has a primary key. If the source table does not have a primary key, Sync will not be able to retrieve deleted records.

This section details a selection of advanced features of the PostgreSQL Sync App.

SSL Configuration

Use SSL Configuration to adjust how Sync App handles TLS/SSL certificate negotiations. You can choose from various certificate formats; see the SSLServerCert property under "Connection String Options" for more information.

Firewall and Proxy

Configure the Sync App for compliance with Firewall and Proxy, including Windows proxies. You can also set up tunnel connections.

Logging

See Logging for an overview of configuration settings that can be used to refine CData logging. For basic logging, you only need to set two connection properties, but there are numerous features that support more refined logging, where you can select subsets of information to be logged using the LogModules connection property.

Customizing the SSL Configuration

By default, the Sync App attempts to negotiate SSL/TLS by checking the server's certificate against the system's trusted certificate store.

To specify another certificate, see the SSLServerCert property for the available formats to do so.

Client SSL Certificates

The PostgreSQL Sync App also supports setting client certificates. Set the following to connect using a client certificate.

• SSLClientCert: The name of the certificate store for the client certificate.
• SSLClientCertType: The type of key store containing the TLS/SSL client certificate.
• SSLClientCertPassword: The password for the TLS/SSL client certificate.
• SSLClientCertSubject: The subject of the TLS/SSL client certificate.

Connecting Through a Firewall or Proxy

Set the following properties:

• To use a proxy-based firewall, set FirewallType, FirewallServer, and FirewallPort.
• To tunnel the connection, set FirewallType to TUNNEL.
• To authenticate, specify FirewallUser and FirewallPassword.
• To authenticate to a SOCKS proxy, additionally set FirewallType to SOCKS5.

In addition to modeling data directly from PostgreSQL, the CData Sync App also includes a few built in stored procedures designed for assisting with OAuth connections against Azure hosted SQL Server. The stored procedures are listed here.

Data Type Mappings

The Sync App maps types from the data source to the corresponding data type available in the schema. The table below documents these mappings.

PostgreSQL	CData Schema
abstime	string
aclitem	string
bigint	long
bigserial	long
bit varying	string
bit	string
boolean	bool
box	string
bytea	binary
char	string
character varying	string
character	string
cid	string
cidr	string
circle	string
date	date
daterange	string
double precision	float
gtsvector	string
inet	string
int2vector	string
int4range	string
int8range	string
integer	int
json	string
jsonb	binary
line	string
lseg	string
macaddr8	string
macaddr	string
money	decimal
name	string
numeric	decimal
numrange	string
oid	string
oidvector	string
path	string
pg_dependencies	string
pg_lsn	string
pg_ndistinct	string
pg_node_tree	string
point	string
polygon	string
real	float
refcursor	string
regclass	string
regconfig	string
regdictionary	string
regnamespace	string
regoper	string
regoperator	string
regproc	string
regprocedure	string
regrole	string
regtype	string
reltime	string
serial	int
smallint	int
smallserial	int
smgr	string
text	string
tid	string
time with time zone	string
time without time zone	time
timestamp with time zone	datetime
timestamp without time zone	datetime
tinterval	string
tsquery	string
tsrange	string
tstzrange	string
tsvector	string
txid_snapshot	string
uuid	uuid
xid	string
xml	string

The connection string properties are the various options that can be used to establish a connection. This section provides a complete list of the options you can configure in the connection string for this provider. Click the links for further details.

For more information on establishing a connection, see Establishing a Connection.

Authentication

---

Property	Description
AuthScheme	The scheme used for authentication. Accepted entries are Password, AzureAD, AzurePassword, AzureMSI, AwsIAMRoles, AwsEC2Roles, GCPServiceAccount.
Server	The host name or IP address of the server.
Database	The name of the PostgreSQL database.
User	The PostgreSQL user account used to authenticate.
Password	The password used to authenticate the user.
Port	The port number of the PostgreSQL server.
UseSSL	This field sets whether SSL is enabled.
Visibility	Visibility restrictions used to filter exposed metadata for tables with privileges granted to them for the current user.

AWS Authentication

---

Property	Description
AWSAccessKey	Your AWS account access key. This value is accessible from your AWS security credentials page.
AWSSecretKey	Your AWS account secret key. This value is accessible from your AWS security credentials page.
AWSRoleARN	The Amazon Resource Name of the role to use when authenticating.
AWSExternalId	A unique identifier that might be required when you assume a role in another account.

Azure Authentication

---

Property	Description
AzureTenant	The Microsoft Online tenant being used to access data. If not specified, your default tenant is used.

OAuth

---

Property	Description
OAuthClientId	The client Id assigned when you register your application with an OAuth authorization server.
OAuthClientSecret	The client secret assigned when you register your application with an OAuth authorization server.
OAuthGrantType	The grant type for the OAuth flow.

JWT OAuth

---

Property	Description
OAuthJWTCert	The JWT Certificate store.
OAuthJWTCertType	The type of key store containing the JWT Certificate.
OAuthJWTCertPassword	The password for the OAuth JWT certificate.
OAuthJWTCertSubject	The subject of the OAuth JWT certificate.

Kerberos

---

Property	Description
KerberosKDC	The Kerberos Key Distribution Center (KDC) service used to authenticate the user.
KerberosRealm	The Kerberos Realm used to authenticate the user.
KerberosSPN	The service principal name (SPN) for the Kerberos Domain Controller.
KerberosKeytabFile	The Keytab file containing your pairs of Kerberos principals and encrypted keys.
KerberosServiceRealm	The Kerberos realm of the service.
KerberosServiceKDC	The Kerberos KDC of the service.
KerberosTicketCache	The full file path to an MIT Kerberos credential cache file.

SSL

---

Property	Description
SSLClientCert	The TLS/SSL client certificate store for SSL Client Authentication (2-way SSL).
SSLClientCertType	The type of key store containing the TLS/SSL client certificate.
SSLClientCertPassword	The password for the TLS/SSL client certificate.
SSLClientCertSubject	The subject of the TLS/SSL client certificate.
SSLServerCert	The certificate to be accepted from the server when connecting using TLS/SSL.

SSH

---

Property	Description
SSHAuthMode	The authentication method used when establishing an SSH Tunnel to the service.
SSHClientCert	A certificate to be used for authenticating the SSHUser.
SSHClientCertPassword	The password of the SSHClientCert key if it has one.
SSHClientCertSubject	The subject of the SSH client certificate.
SSHClientCertType	The type of SSHClientCert private key.
SSHServer	The SSH server.
SSHPort	The SSH port.
SSHUser	The SSH user.
SSHPassword	The SSH password.
SSHServerFingerprint	The SSH server fingerprint.
UseSSH	Whether to tunnel the PostgreSQL connection over SSH. Use SSH.

Firewall

---

Property	Description
FirewallType	The protocol used by a proxy-based firewall.
FirewallServer	The name or IP address of a proxy-based firewall.
FirewallPort	The TCP port for a proxy-based firewall.
FirewallUser	The user name to use to authenticate with a proxy-based firewall.
FirewallPassword	A password used to authenticate to a proxy-based firewall.

Logging

---

Property	Description
LogModules	Core modules to be included in the log file.

Schema

---

Property	Description
Location	A path to the directory that contains the schema files defining tables, views, and stored procedures.
BrowsableSchemas	This property restricts the schemas reported to a subset of the available schemas. For example, BrowsableSchemas=SchemaA,SchemaB,SchemaC.
Tables	This property restricts the tables reported to a subset of the available tables. For example, Tables=TableA,TableB,TableC.
Views	Restricts the views reported to a subset of the available tables. For example, Views=ViewA,ViewB,ViewC.
IgnoredSchemas	Visibility restriction filter which is used to hide schemas from the list of schemas obtained by querying metadata. For example, 'information_schema, pg_catalog'. Schema names are case sensitive.

Miscellaneous

---

Property	Description
AllowPreparedStatement	Prepare a query statement before its execution.
BrowsePartitions	By default the provider exposes the super table and its partitions by metadata. You may hide sub partitions by setting this property to false.
FetchResultSetMetadata	This field sets whether the provider retrieves metadata pertaining to the schema and table name for resultset columns returned by the server.
IncludeTableTypes	If set to true, the provider will query for the types of individual tables and views.
MaxRows	Limits the number of rows returned when no aggregation or GROUP BY is used in the query. This takes precedence over LIMIT clauses.
Other	These hidden properties are used only in specific use cases.
QueryPassthrough	This option passes the query to the PostgreSQL server as is.
Timeout	The value in seconds until the timeout error is thrown, canceling the operation.
TimeZone	Sets the time zone the server will use to return datetime/timestamp columns.

This section provides a complete list of the Authentication properties you can configure in the connection string for this provider.

---

Property	Description
AuthScheme	The scheme used for authentication. Accepted entries are Password, AzureAD, AzurePassword, AzureMSI, AwsIAMRoles, AwsEC2Roles, GCPServiceAccount.
Server	The host name or IP address of the server.
Database	The name of the PostgreSQL database.
User	The PostgreSQL user account used to authenticate.
Password	The password used to authenticate the user.
Port	The port number of the PostgreSQL server.
UseSSL	This field sets whether SSL is enabled.
Visibility	Visibility restrictions used to filter exposed metadata for tables with privileges granted to them for the current user.

The scheme used for authentication. Accepted entries are Password, AzureAD, AzurePassword, AzureMSI, AwsIAMRoles, AwsEC2Roles, GCPServiceAccount.

Remarks

Together with Password and User, this field is used to authenticate against the server. Password is the default option. Use the following options to select your authentication scheme:

• Password: Set this to use your PostgreSQL Server Password.
• AzureAD: Set this to use Azure Active Directory OAuth authentication.
• AzurePassword: Set this to use Azure Active Directory Password authentication.
• AzureMSI: Set this to use Azure Active Directory MSI (Managed Service Identity) authentication.
• AwsIAMRoles: Set this to use Amazon Web Services IAM Roles to connect PostgreSQL Server in Amazon RDS instance.
• AwsEC2Roles: Set this to automatically use IAM Roles assigned to the EC2 machine the CData Sync App is currently running on.
• GCPServiceAccount: Set this to use Google Service Account to authenticate to your PostgreSQL Google SQL Cloud instance.

The host name or IP address of the server.

Remarks

The host name or IP of the server hosting the PostgreSQL Database. If not set, the default value "localhost" is used.

The name of the PostgreSQL database.

Remarks

The database to connect to when connecting to the PostgreSQL Server. If a database is not provided, the user's default database will be used.

The PostgreSQL user account used to authenticate.

Remarks

Together with Password, this field is used to authenticate against the PostgreSQL server.

The password used to authenticate the user.

Remarks

The User and Password are together used to authenticate with the server.

The port number of the PostgreSQL server.

Remarks

The port number of the Server hosting the PostgreSQL Database. If not specified, the default port number (5432) is used.

This field sets whether SSL is enabled.

Remarks

This field sets whether the Sync App will attempt to negotiate TLS/SSL connections to the server. By default, the Sync App checks the server's certificate against the system's trusted certificate store. To specify another certificate, set SSLServerCert.

Visibility restrictions used to filter exposed metadata for tables with privileges granted to them for the current user.

Remarks

By default, visibility filtering is not applied. Filtering values are case insensitive.

This section provides a complete list of the AWS Authentication properties you can configure in the connection string for this provider.

---

Property	Description
AWSAccessKey	Your AWS account access key. This value is accessible from your AWS security credentials page.
AWSSecretKey	Your AWS account secret key. This value is accessible from your AWS security credentials page.
AWSRoleARN	The Amazon Resource Name of the role to use when authenticating.
AWSExternalId	A unique identifier that might be required when you assume a role in another account.

Your AWS account access key. This value is accessible from your AWS security credentials page.

Remarks

Your AWS account access key. This value is accessible from your AWS security credentials page:

1. Sign into the AWS Management console with the credentials for your root account.
2. Select your account name or number and select My Security Credentials in the menu that is displayed.
3. Click Continue to Security Credentials and expand the Access Keys section to manage or create root account access keys.

Your AWS account secret key. This value is accessible from your AWS security credentials page.

Remarks

Your AWS account secret key. This value is accessible from your AWS security credentials page:

1. Sign into the AWS Management console with the credentials for your root account.
2. Select your account name or number and select My Security Credentials in the menu that is displayed.
3. Click Continue to Security Credentials and expand the Access Keys section to manage or create root account access keys.

The Amazon Resource Name of the role to use when authenticating.

Remarks

When authenticating outside of AWS, it is common to use a Role for authentication instead of your direct AWS account credentials. Entering the AWSRoleARN will cause the CData Sync App to perform a role based authentication instead of using the AWSAccessKey and AWSSecretKey directly. The AWSAccessKey and AWSSecretKey must still be specified to perform this authentication. You cannot use the credentials of an AWS root user when setting RoleARN. The AWSAccessKey and AWSSecretKey must be those of an IAM user.

A unique identifier that might be required when you assume a role in another account.

Remarks

A unique identifier that might be required when you assume a role in another account.

This section provides a complete list of the Azure Authentication properties you can configure in the connection string for this provider.

---

Property	Description
AzureTenant	The Microsoft Online tenant being used to access data. If not specified, your default tenant is used.

The Microsoft Online tenant being used to access data. If not specified, your default tenant is used.

Remarks

The Microsoft Online tenant being used to access data. For instance, contoso.onmicrosoft.com. Alternatively, specify the tenant Id. This value is the directory Id in the Azure Portal > Azure Active Directory > Properties.

Typically it is not necessary to specify the Tenant. This can be automatically determined by Microsoft when using the OAuthGrantType set to CODE (default). However, it may fail in the case that the user belongs to multiple tenants. For instance, if an Admin of domain A invites a user of domain B to be a guest user. The user will now belong to both tenants. It is a good practice to specify the Tenant, although in general things should normally work without having to specify it.

The AzureTenant is required when setting OAuthGrantType to CLIENT. When using client credentials, there is no user context. The credentials are taken from the context of the app itself. While Microsoft still allows client credentials to be obtained without specifying which Tenant, it has a much lower probability of picking the specific tenant you want to work with. For this reason, we require AzureTenant to be explicitly stated for all client credentials connections to ensure you get credentials that are applicable for the domain you intend to connect to.

This section provides a complete list of the OAuth properties you can configure in the connection string for this provider.

---

Property	Description
OAuthClientId	The client Id assigned when you register your application with an OAuth authorization server.
OAuthClientSecret	The client secret assigned when you register your application with an OAuth authorization server.
OAuthGrantType	The grant type for the OAuth flow.

The client Id assigned when you register your application with an OAuth authorization server.

Remarks

As part of registering an OAuth application, you will receive the OAuthClientId value, sometimes also called a consumer key, and a client secret, the OAuthClientSecret.

The client secret assigned when you register your application with an OAuth authorization server.

Remarks

As part of registering an OAuth application, you will receive the OAuthClientId, also called a consumer key. You will also receive a client secret, also called a consumer secret. Set the client secret in the OAuthClientSecret property.

The grant type for the OAuth flow.

Remarks

The following options are available: CODE,CLIENT

This section provides a complete list of the JWT OAuth properties you can configure in the connection string for this provider.

---

Property	Description
OAuthJWTCert	The JWT Certificate store.
OAuthJWTCertType	The type of key store containing the JWT Certificate.
OAuthJWTCertPassword	The password for the OAuth JWT certificate.
OAuthJWTCertSubject	The subject of the OAuth JWT certificate.

The JWT Certificate store.

Remarks

The name of the certificate store for the client certificate.

The OAuthJWTCertType field specifies the type of the certificate store specified by OAuthJWTCert. If the store is password protected, specify the password in OAuthJWTCertPassword.

OAuthJWTCert is used in conjunction with the OAuthJWTCertSubject field in order to specify client certificates. If OAuthJWTCert has a value, and OAuthJWTCertSubject is set, a search for a certificate is initiated. Please refer to the OAuthJWTCertSubject field for details.

Designations of certificate stores are platform-dependent.

The following are designations of the most common User and Machine certificate stores in Windows:

MY	A certificate store holding personal certificates with their associated private keys.
CA	Certifying authority certificates.
ROOT	Root certificates.
SPC	Software publisher certificates.

In Java, the certificate store normally is a file containing certificates and optional private keys.

When the certificate store type is PFXFile, this property must be set to the name of the file. When the type is PFXBlob, the property must be set to the binary contents of a PFX file (i.e. PKCS12 certificate store).

The type of key store containing the JWT Certificate.

Remarks

This property can take one of the following values:

USER	For Windows, this specifies that the certificate store is a certificate store owned by the current user. Note: This store type is not available in Java.
MACHINE	For Windows, this specifies that the certificate store is a machine store. Note: this store type is not available in Java.
PFXFILE	The certificate store is the name of a PFX (PKCS12) file containing certificates.
PFXBLOB	The certificate store is a string (base-64-encoded) representing a certificate store in PFX (PKCS12) format.
JKSFILE	The certificate store is the name of a Java key store (JKS) file containing certificates. Note: this store type is only available in Java.
JKSBLOB	The certificate store is a string (base-64-encoded) representing a certificate store in Java key store (JKS) format. Note: this store type is only available in Java.
PEMKEY_FILE	The certificate store is the name of a PEM-encoded file that contains a private key and an optional certificate.
PEMKEY_BLOB	The certificate store is a string (base64-encoded) that contains a private key and an optional certificate.
PUBLIC_KEY_FILE	The certificate store is the name of a file that contains a PEM- or DER-encoded public key certificate.
PUBLIC_KEY_BLOB	The certificate store is a string (base-64-encoded) that contains a PEM- or DER-encoded public key certificate.
SSHPUBLIC_KEY_FILE	The certificate store is the name of a file that contains an SSH-style public key.
SSHPUBLIC_KEY_BLOB	The certificate store is a string (base-64-encoded) that contains an SSH-style public key.
P7BFILE	The certificate store is the name of a PKCS7 file containing certificates.
PPKFILE	The certificate store is the name of a file that contains a PPK (PuTTY Private Key).
XMLFILE	The certificate store is the name of a file that contains a certificate in XML format.
XMLBLOB	The certificate store is a string that contains a certificate in XML format.
GOOGLEJSON	The certificate store is the name of a JSON file containing the service account information. Only valid when connecting to a Google service.
GOOGLEJSONBLOB	The certificate store is a string that contains the service account JSON. Only valid when connecting to a Google service.

The password for the OAuth JWT certificate.

Remarks

If the certificate store is of a type that requires a password, this property is used to specify that password in order to open the certificate store.

This is not required when using the GOOGLEJSON OAuthJWTCertType. Google JSON keys are not encrypted.

The subject of the OAuth JWT certificate.

Remarks

When loading a certificate the subject is used to locate the certificate in the store.

If an exact match is not found, the store is searched for subjects containing the value of the property.

If a match is still not found, the property is set to an empty string, and no certificate is selected.

The special value "*" picks the first certificate in the certificate store.

The certificate subject is a comma separated list of distinguished name fields and values. For instance "CN=www.server.com, OU=test, C=US, [email protected]". Common fields and their meanings are displayed below.

Field	Meaning
CN	Common Name. This is commonly a host name like www.server.com.
O	Organization
OU	Organizational Unit
L	Locality
S	State
C	Country
E	Email Address

If a field value contains a comma it must be quoted.

This section provides a complete list of the Kerberos properties you can configure in the connection string for this provider.

---

Property	Description
KerberosKDC	The Kerberos Key Distribution Center (KDC) service used to authenticate the user.
KerberosRealm	The Kerberos Realm used to authenticate the user.
KerberosSPN	The service principal name (SPN) for the Kerberos Domain Controller.
KerberosKeytabFile	The Keytab file containing your pairs of Kerberos principals and encrypted keys.
KerberosServiceRealm	The Kerberos realm of the service.
KerberosServiceKDC	The Kerberos KDC of the service.
KerberosTicketCache	The full file path to an MIT Kerberos credential cache file.

The Kerberos Key Distribution Center (KDC) service used to authenticate the user.

Remarks

The Kerberos properties are used when using SPNEGO or Windows Authentication. The Sync App will request session tickets and temporary session keys from the Kerberos KDC service. The Kerberos KDC service is conventionally colocated with the domain controller.

If Kerberos KDC is not specified, the Sync App will attempt to detect these properties automatically from the following locations:

• KRB5 Config File (krb5.ini/krb5.conf): If the KRB5_CONFIG environment variable is set and the file exists, the Sync App will obtain the KDC from the specified file. Otherwise, it will attempt to read from the default MIT location based on the OS: C:\ProgramData\MIT\Kerberos5\krb5.ini (Windows) or /etc/krb5.conf (Linux).
• Domain Name and Host: If the Kerberos Realm and Kerberos KDC could not be inferred from another location, the Sync App will infer them from the configured domain name and host.

The Kerberos Realm used to authenticate the user.

Remarks

The Kerberos properties are used when using SPNEGO or Windows Authentication. The Kerberos Realm is used to authenticate the user with the Kerberos Key Distribution Service (KDC). The Kerberos Realm can be configured by an administrator to be any string, but conventionally it is based on the domain name.

If Kerberos Realm is not specified, the Sync App will attempt to detect these properties automatically from the following locations:

• KRB5 Config File (krb5.ini/krb5.conf): If the KRB5_CONFIG environment variable is set and the file exists, the Sync App will obtain the default realm from the specified file. Otherwise, it will attempt to read from the default MIT location based on the OS: C:\ProgramData\MIT\Kerberos5\krb5.ini (Windows) or /etc/krb5.conf (Linux)
• Domain Name and Host: If the Kerberos Realm and Kerberos KDC could not be inferred from another location, the Sync App will infer them from the user-configured domain name and host. This might work in some Windows environments.

The service principal name (SPN) for the Kerberos Domain Controller.

Remarks

If the SPN on the Kerberos Domain Controller is not the same as the URL that you are authenticating to, use this property to set the SPN.

The Keytab file containing your pairs of Kerberos principals and encrypted keys.

Remarks

The Keytab file containing your pairs of Kerberos principals and encrypted keys.

The Kerberos realm of the service.

Remarks

The KerberosServiceRealm is the specify the service Kerberos realm when using cross-realm Kerberos authentication.

In most cases, a single realm and KDC machine are used to perform the Kerberos authentication and this property is not required.

This property is available for complex setups where a different realm and KDC machine are used to obtain an authentication ticket (AS request) and a service ticket (TGS request).

The Kerberos KDC of the service.

Remarks

The KerberosServiceKDC is used to specify the service Kerberos KDC when using cross-realm Kerberos authentication.

In most cases, a single realm and KDC machine are used to perform the Kerberos authentication and this property is not required.

This property is available for complex setups where a different realm and KDC machine are used to obtain an authentication ticket (AS request) and a service ticket (TGS request).

The full file path to an MIT Kerberos credential cache file.

Remarks

This property can be set if you wish to use a credential cache file that was created using the MIT Kerberos Ticket Manager or kinit command.

This section provides a complete list of the SSL properties you can configure in the connection string for this provider.

---

Property	Description
SSLClientCert	The TLS/SSL client certificate store for SSL Client Authentication (2-way SSL).
SSLClientCertType	The type of key store containing the TLS/SSL client certificate.
SSLClientCertPassword	The password for the TLS/SSL client certificate.
SSLClientCertSubject	The subject of the TLS/SSL client certificate.
SSLServerCert	The certificate to be accepted from the server when connecting using TLS/SSL.

The TLS/SSL client certificate store for SSL Client Authentication (2-way SSL).

Remarks

The name of the certificate store for the client certificate.

The SSLClientCertType field specifies the type of the certificate store specified by SSLClientCert. If the store is password protected, specify the password in SSLClientCertPassword.

SSLClientCert is used in conjunction with the SSLClientCertSubject field in order to specify client certificates. If SSLClientCert has a value, and SSLClientCertSubject is set, a search for a certificate is initiated. See SSLClientCertSubject for more information.

Designations of certificate stores are platform-dependent.

The following are designations of the most common User and Machine certificate stores in Windows:

MY	A certificate store holding personal certificates with their associated private keys.
CA	Certifying authority certificates.
ROOT	Root certificates.
SPC	Software publisher certificates.

In Java, the certificate store normally is a file containing certificates and optional private keys.

When the certificate store type is PFXFile, this property must be set to the name of the file. When the type is PFXBlob, the property must be set to the binary contents of a PFX file (for example, PKCS12 certificate store).

The type of key store containing the TLS/SSL client certificate.

Remarks

This property can take one of the following values:

USER - default	For Windows, this specifies that the certificate store is a certificate store owned by the current user. Note that this store type is not available in Java.
MACHINE	For Windows, this specifies that the certificate store is a machine store. Note that this store type is not available in Java.
PFXFILE	The certificate store is the name of a PFX (PKCS12) file containing certificates.
PFXBLOB	The certificate store is a string (base-64-encoded) representing a certificate store in PFX (PKCS12) format.
JKSFILE	The certificate store is the name of a Java key store (JKS) file containing certificates. Note that this store type is only available in Java.
JKSBLOB	The certificate store is a string (base-64-encoded) representing a certificate store in JKS format. Note that this store type is only available in Java.
PEMKEY_FILE	The certificate store is the name of a PEM-encoded file that contains a private key and an optional certificate.
PEMKEY_BLOB	The certificate store is a string (base64-encoded) that contains a private key and an optional certificate.
PUBLIC_KEY_FILE	The certificate store is the name of a file that contains a PEM- or DER-encoded public key certificate.
PUBLIC_KEY_BLOB	The certificate store is a string (base-64-encoded) that contains a PEM- or DER-encoded public key certificate.
SSHPUBLIC_KEY_FILE	The certificate store is the name of a file that contains an SSH-style public key.
SSHPUBLIC_KEY_BLOB	The certificate store is a string (base-64-encoded) that contains an SSH-style public key.
P7BFILE	The certificate store is the name of a PKCS7 file containing certificates.
PPKFILE	The certificate store is the name of a file that contains a PuTTY Private Key (PPK).
XMLFILE	The certificate store is the name of a file that contains a certificate in XML format.
XMLBLOB	The certificate store is a string that contains a certificate in XML format.

The password for the TLS/SSL client certificate.

Remarks

If the certificate store is of a type that requires a password, this property is used to specify that password to open the certificate store.

The subject of the TLS/SSL client certificate.

Remarks

When loading a certificate the subject is used to locate the certificate in the store.

If an exact match is not found, the store is searched for subjects containing the value of the property. If a match is still not found, the property is set to an empty string, and no certificate is selected.

The special value "*" picks the first certificate in the certificate store.

The certificate subject is a comma separated list of distinguished name fields and values. For example, "CN=www.server.com, OU=test, C=US, [email protected]". The common fields and their meanings are shown below.

Field	Meaning
CN	Common Name. This is commonly a host name like www.server.com.
O	Organization
OU	Organizational Unit
L	Locality
S	State
C	Country
E	Email Address

If a field value contains a comma, it must be quoted.

The certificate to be accepted from the server when connecting using TLS/SSL.

Remarks

If using a TLS/SSL connection, this property can be used to specify the TLS/SSL certificate to be accepted from the server. Any other certificate that is not trusted by the machine is rejected.

This property can take the following forms:

Description	Example
A full PEM Certificate (example shortened for brevity)	-----BEGIN CERTIFICATE----- MIIChTCCAe4CAQAwDQYJKoZIhv......Qw== -----END CERTIFICATE-----
A path to a local file containing the certificate	C:\cert.cer
The public key (example shortened for brevity)	-----BEGIN RSA PUBLIC KEY----- MIGfMA0GCSq......AQAB -----END RSA PUBLIC KEY-----
The MD5 Thumbprint (hex values can also be either space or colon separated)	ecadbdda5a1529c58a1e9e09828d70e4
The SHA1 Thumbprint (hex values can also be either space or colon separated)	34a929226ae0819f2ec14b4a3d904f801cbb150d

If not specified, any certificate trusted by the machine is accepted.

Use '*' to signify to accept all certificates. Note that this is not recommended due to security concerns.

This section provides a complete list of the SSH properties you can configure in the connection string for this provider.

---

Property	Description
SSHAuthMode	The authentication method used when establishing an SSH Tunnel to the service.
SSHClientCert	A certificate to be used for authenticating the SSHUser.
SSHClientCertPassword	The password of the SSHClientCert key if it has one.
SSHClientCertSubject	The subject of the SSH client certificate.
SSHClientCertType	The type of SSHClientCert private key.
SSHServer	The SSH server.
SSHPort	The SSH port.
SSHUser	The SSH user.
SSHPassword	The SSH password.
SSHServerFingerprint	The SSH server fingerprint.
UseSSH	Whether to tunnel the PostgreSQL connection over SSH. Use SSH.

The authentication method used when establishing an SSH Tunnel to the service.

Remarks

• None: No authentication is performed. The current User value is ignored, and the connection is logged in as anonymous.
• Password: The Sync App uses the values of User and Password to authenticate the user.
• Public_Key: The Sync App uses the values of User and SSHClientCert to authenticate the user. SSHClientCert must have a private key available for this authentication method to succeed.

A certificate to be used for authenticating the SSHUser.

Remarks

SSHClientCert must contain a valid private key in order to use public key authentication. A public key is optional, if one is not included then the Sync App generates it from the private key. The Sync App sends the public key to the server and the connection is allowed if the user has authorized the public key.

The SSHClientCertType field specifies the type of the key store specified by SSHClientCert. If the store is password protected, specify the password in SSHClientCertPassword.

Some types of key stores are containers which may include multiple keys. By default the Sync App will select the first key in the store, but you can specify a specific key using SSHClientCertSubject.

The password of the SSHClientCert key if it has one.

Remarks

This property is only used when authenticating to SFTP servers with SSHAuthMode set to PublicKey and SSHClientCert set to a private key.

The subject of the SSH client certificate.

Remarks

When loading a certificate the subject is used to locate the certificate in the store.

If an exact match is not found, the store is searched for subjects containing the value of the property.

If a match is still not found, the property is set to an empty string, and no certificate is selected.

The special value "*" picks the first certificate in the certificate store.

The certificate subject is a comma separated list of distinguished name fields and values. For instance "CN=www.server.com, OU=test, C=US, [email protected]". Common fields and their meanings are displayed below.

Field	Meaning
CN	Common Name. This is commonly a host name like www.server.com.
O	Organization
OU	Organizational Unit
L	Locality
S	State
C	Country
E	Email Address

If a field value contains a comma it must be quoted.

The type of SSHClientCert private key.

Remarks

This property can take one of the following values:

Types	Description	Allowed Blob Values
MACHINE/USER		Blob values are not supported.
JKSFILE/JKSBLOB		base64-only
PFXFILE/PFXBLOB	A PKCS12-format (.pfx) file. Must contain both a certificate and a private key.	base64-only
PEMKEY_FILE/PEMKEY_BLOB	A PEM-format file. Must contain an RSA, DSA, or OPENSSH private key. Can optionally contain a certificate matching the private key.	base64 or plain text. Newlines may be replaced with spaces when providing the blob as text.
PPKFILE/PPKBLOB	A PuTTY-format private key created using the puttygen tool.	base64-only
XMLFILE/XMLBLOB	An XML key in the format generated by the .NET RSA class: RSA.ToXmlString(true).	base64 or plain text.

The SSH server.

Remarks

The SSH server.

The SSH port.

Remarks

The SSH port.

The SSH user.

Remarks

The SSH user.

The SSH password.

Remarks

The SSH password.

The SSH server fingerprint.

Remarks

The SSH server fingerprint.

Whether to tunnel the PostgreSQL connection over SSH. Use SSH.

Remarks

By default the Sync App will attempt to connect directly to PostgreSQL. When this option is enabled, the Sync App will instead establish an SSH connection with the SSHServer and tunnel the connection to PostgreSQL through it.

This section provides a complete list of the Firewall properties you can configure in the connection string for this provider.

---

Property	Description
FirewallType	The protocol used by a proxy-based firewall.
FirewallServer	The name or IP address of a proxy-based firewall.
FirewallPort	The TCP port for a proxy-based firewall.
FirewallUser	The user name to use to authenticate with a proxy-based firewall.
FirewallPassword	A password used to authenticate to a proxy-based firewall.

The protocol used by a proxy-based firewall.

Remarks

This property specifies the protocol that the Sync App will use to tunnel traffic through the FirewallServer proxy.

Type	Default Port	Description
TUNNEL	80	When this is set, the Sync App opens a connection to PostgreSQL and traffic flows back and forth through the proxy.
SOCKS4	1080	When this is set, the Sync App sends data through the SOCKS 4 proxy specified by FirewallServer and FirewallPort and passes the FirewallUser value to the proxy, which determines if the connection request should be granted.
SOCKS5	1080	When this is set, the Sync App sends data through the SOCKS 5 proxy specified by FirewallServer and FirewallPort. If your proxy requires authentication, set FirewallUser and FirewallPassword to credentials the proxy recognizes.

The name or IP address of a proxy-based firewall.

Remarks

This property specifies the IP address, DNS name, or host name of a proxy allowing traversal of a firewall. The protocol is specified by FirewallType: Use FirewallServer with this property to connect through SOCKS or do tunneling.

The TCP port for a proxy-based firewall.

Remarks

This specifies the TCP port for a proxy allowing traversal of a firewall. Use FirewallServer to specify the name or IP address. Specify the protocol with FirewallType.

The user name to use to authenticate with a proxy-based firewall.

Remarks

The FirewallUser and FirewallPassword properties are used to authenticate against the proxy specified in FirewallServer and FirewallPort, following the authentication method specified in FirewallType.

A password used to authenticate to a proxy-based firewall.

Remarks

This property is passed to the proxy specified by FirewallServer and FirewallPort, following the authentication method specified by FirewallType.

This section provides a complete list of the Logging properties you can configure in the connection string for this provider.

---

Property	Description
LogModules	Core modules to be included in the log file.

Core modules to be included in the log file.

Remarks

Only the modules specified (separated by ';') will be included in the log file. By default all modules are included.

See the Logging page for an overview.

This section provides a complete list of the Schema properties you can configure in the connection string for this provider.

---

Property	Description
Location	A path to the directory that contains the schema files defining tables, views, and stored procedures.
BrowsableSchemas	This property restricts the schemas reported to a subset of the available schemas. For example, BrowsableSchemas=SchemaA,SchemaB,SchemaC.
Tables	This property restricts the tables reported to a subset of the available tables. For example, Tables=TableA,TableB,TableC.
Views	Restricts the views reported to a subset of the available tables. For example, Views=ViewA,ViewB,ViewC.
IgnoredSchemas	Visibility restriction filter which is used to hide schemas from the list of schemas obtained by querying metadata. For example, 'information_schema, pg_catalog'. Schema names are case sensitive.

A path to the directory that contains the schema files defining tables, views, and stored procedures.

Remarks

The path to a directory which contains the schema files for the Sync App (.rsd files for tables and views, .rsb files for stored procedures). The folder location can be a relative path from the location of the executable. The Location property is only needed if you want to customize definitions (for example, change a column name, ignore a column, and so on) or extend the data model with new tables, views, or stored procedures.

If left unspecified, the default location is "%APPDATA%\\CData\\PostgreSQL Data Provider\\Schema" with %APPDATA% being set to the user's configuration directory:

Platform	%APPDATA%
Windows	The value of the APPDATA environment variable
Linux	~/.config

This property restricts the schemas reported to a subset of the available schemas. For example, BrowsableSchemas=SchemaA,SchemaB,SchemaC.

Remarks

Listing the schemas from databases can be expensive. Providing a list of schemas in the connection string improves the performance.

This property restricts the tables reported to a subset of the available tables. For example, Tables=TableA,TableB,TableC.

Remarks

Listing the tables from some databases can be expensive. Providing a list of tables in the connection string improves the performance of the Sync App.

This property can also be used as an alternative to automatically listing views if you already know which ones you want to work with and there would otherwise be too many to work with.

Specify the tables you want in a comma-separated list. Each table should be a valid SQL identifier with any special characters escaped using square brackets, double-quotes or backticks. For example, Tables=TableA,[TableB/WithSlash],WithCatalog.WithSchema.`TableC With Space`.

Note that when connecting to a data source with multiple schemas or catalogs, you will need to provide the fully qualified name of the table in this property, as in the last example here, to avoid ambiguity between tables that exist in multiple catalogs or schemas.

Restricts the views reported to a subset of the available tables. For example, Views=ViewA,ViewB,ViewC.

Remarks

Listing the views from some databases can be expensive. Providing a list of views in the connection string improves the performance of the Sync App.

This property can also be used as an alternative to automatically listing views if you already know which ones you want to work with and there would otherwise be too many to work with.

Specify the views you want in a comma-separated list. Each view should be a valid SQL identifier with any special characters escaped using square brackets, double-quotes or backticks. For example, Views=ViewA,[ViewB/WithSlash],WithCatalog.WithSchema.`ViewC With Space`.

Note that when connecting to a data source with multiple schemas or catalogs, you will need to provide the fully qualified name of the table in this property, as in the last example here, to avoid ambiguity between tables that exist in multiple catalogs or schemas.

Visibility restriction filter which is used to hide schemas from the list of schemas obtained by querying metadata. For example, 'information_schema, pg_catalog'. Schema names are case sensitive.

Remarks

By default, restrictions are not applied.

This section provides a complete list of the Miscellaneous properties you can configure in the connection string for this provider.

---

Property	Description
AllowPreparedStatement	Prepare a query statement before its execution.
BrowsePartitions	By default the provider exposes the super table and its partitions by metadata. You may hide sub partitions by setting this property to false.
FetchResultSetMetadata	This field sets whether the provider retrieves metadata pertaining to the schema and table name for resultset columns returned by the server.
IncludeTableTypes	If set to true, the provider will query for the types of individual tables and views.
MaxRows	Limits the number of rows returned when no aggregation or GROUP BY is used in the query. This takes precedence over LIMIT clauses.
Other	These hidden properties are used only in specific use cases.
QueryPassthrough	This option passes the query to the PostgreSQL server as is.
Timeout	The value in seconds until the timeout error is thrown, canceling the operation.
TimeZone	Sets the time zone the server will use to return datetime/timestamp columns.

Prepare a query statement before its execution.

Remarks

If the AllowPreparedStatement property is set to false, statements are parsed each time they are executed. Setting this property to false can be useful if you are executing many different queries only once.

If you are executing the same query repeatedly, you will generally see better performance by leaving this property set to the default, True. Preparing the query avoids recompiling the same query over and over. However, prepared statements also require the Sync App to keep the connection active and open while the statement is prepared.

By default the provider exposes the super table and its partitions by metadata. You may hide sub partitions by setting this property to false.

Remarks

This property has an effect on servers running version 10 and later.

This field sets whether the provider retrieves metadata pertaining to the schema and table name for resultset columns returned by the server.

Remarks

By default, the Sync App will not request that the server provides detailed information about resultset columns like the table name or schema name. It requires issuing additional metadata queries via Sync App , and it may affect query performance essentially in some scenarios. Consider setting this property to True when you need such detailed descriptive information for the resultset columns.

If set to true, the provider will query for the types of individual tables and views.

Remarks

If set to true, the Sync App will query PostgreSQL server for the types of individual tables and views.

Limits the number of rows returned when no aggregation or GROUP BY is used in the query. This takes precedence over LIMIT clauses.

Remarks

Limits the number of rows returned when no aggregation or GROUP BY is used in the query. This takes precedence over LIMIT clauses.

These hidden properties are used only in specific use cases.

Remarks

The properties listed below are available for specific use cases. Normal driver use cases and functionality should not require these properties.

Specify multiple properties in a semicolon-separated list.

Integration and Formatting

DefaultColumnSize	Sets the default length of string fields when the data source does not provide column length in the metadata. The default value is 2000.
ConvertDateTimeToGMT	Determines whether to convert date-time values to GMT, instead of the local time of the machine.
RecordToFile=filename	Records the underlying socket data transfer to the specified file.

This option passes the query to the PostgreSQL server as is.

Remarks

When this is set, queries are passed through directly to PostgreSQL.

The value in seconds until the timeout error is thrown, canceling the operation.

Remarks

If Timeout = 0, operations do not time out. The operations run until they complete successfully or until they encounter an error condition.

If Timeout expires and the operation is not yet complete, the Sync App throws an exception.

Sets the time zone the server will use to return datetime/timestamp columns.

Remarks

The server stores time with time zone and timestamp with time zone in UTC. If the TimeZone property is not set, the provider uses the client's local time zone.

Setting this property can be useful when you need the server to convert to a specific time zone, which is different from the client's local time zone.