Create a connection to DB2 by navigating to the Connections page in the Sync App application and selecting the corresponding icon in the Add Connections panel. If the DB2 icon is not available, click the Add More icon to download and install the DB2 connector from the CData site.

Required properties are listed under the Settings tab. The Advanced tab lists connection properties that are not typically required.

Set the following properties to connect to DB2:

• Server: Set this to the name of the server running DB2.
• Port: Set this to the port the DB2 server is listening on.
• Database: Set this to the name of the DB2 database.
• User: Set this to the username of a user allowed to access the database.
• Password: Set this to the password of a user allowed to access the database.

This section details a selection of advanced features of the DB2 Sync App.

SSL Configuration

Use SSL Configuration to adjust how Sync App handles TLS/SSL certificate negotiations. You can choose from various certificate formats; see the SSLServerCert property under "Connection String Options" for more information.

Firewall and Proxy

Configure the Sync App for compliance with Firewall and Proxy, including Windows proxies. You can also set up tunnel connections.

Logging

See Logging for an overview of configuration settings that can be used to refine CData logging. For basic logging, you only need to set two connection properties, but there are numerous features that support more refined logging, where you can select subsets of information to be logged using the LogModules connection property.

Customizing the SSL Configuration

By default, the Sync App attempts to negotiate SSL/TLS by checking the server's certificate against the system's trusted certificate store.

To specify another certificate, see the SSLServerCert property for the available formats to do so.

Connecting Through a Firewall or Proxy

Set the following properties:

• To use a proxy-based firewall, set FirewallType, FirewallServer, and FirewallPort.
• To tunnel the connection, set FirewallType to TUNNEL.
• To authenticate, specify FirewallUser and FirewallPassword.
• To authenticate to a SOCKS proxy, additionally set FirewallType to SOCKS5.

The connection string properties are the various options that can be used to establish a connection. This section provides a complete list of the options you can configure in the connection string for this provider. Click the links for further details.

Authentication

SSL

SSH

Firewall

Logging

Schema

Miscellaneous

This section provides a complete list of the Authentication properties you can configure in the connection string for this provider.

The authentication mechanism that the provider will use to authenticate with DB2.

Remarks

• USRIDPWD: Set this to use user id and password to authenticate.
• EUSRIDPWD: Set this to use encrypted user id and encrypted password to authenticate.
• IBMIAMAuth: Set this to use user id and password(apikey) to connect to Watson Query.

The name of the DB2 server.

Remarks

This property should be set to the name or network address of the server hosting the DB2 database.

The port used to connect to the server hosting the DB2 database.

Remarks

The port used to connect to the server hosting the DB2 database.

The name of the DB2 database.

Remarks

The name of the DB2 database running on the specified Server. To connect to the database, you will also need to specify a User and Password for a user authorized to access the database.

A database user.

Remarks

The username of a user authorized to access the database.

The user's password.

Remarks

The password provided for authentication with the database.

This field sets whether SSL is enabled.

Remarks

This field sets whether the Sync App will attempt to negotiate TLS/SSL connections to the server. By default, the Sync App checks the server's certificate against the system's trusted certificate store. To specify another certificate, set SSLServerCert.

This property allows you to specify multiple servers in addition to the one configured in Server and Port . Specify both a server name and port; separate servers with a comma.

Remarks

This property allows you to specify the other servers in addition to the one configured in Server and Port. You must specify all servers using AlternateServers, Server, and Port.

Specify both a server name and port in AlternateServers; separate servers with a comma. For example:

Server=localhost;Port=27017;AlternateServers=localhost:27018,localhost:27019;

This section provides a complete list of the SSL properties you can configure in the connection string for this provider.

The certificate to be accepted from the server when connecting using TLS/SSL.

Remarks

If using a TLS/SSL connection, this property can be used to specify the TLS/SSL certificate to be accepted from the server. Any other certificate that is not trusted by the machine is rejected.

This property can take the following forms:

If not specified, any certificate trusted by the machine is accepted.

Use '*' to signify to accept all certificates. Note that this is not recommended due to security concerns.

This section provides a complete list of the SSH properties you can configure in the connection string for this provider.

The authentication method to be used to log on to an SFTP server.

Remarks

• None: No authentication will be performed. The current User value is ignored, and the connection will be logged in as anonymous.
• Password: The Sync App will use the values of User and Password to authenticate the user.
• Public_Key: The Sync App will use the values of User and SSHClientCert to authenticate the user. SSHClientCert must have a private key available for this authentication method to succeed.

A private key to be used for authenticating the user.

Remarks

SSHClientCert must contain a valid private key in order to use public key authentication. A public key is optional, if one is not included then the Sync App generates it from the private key. The Sync App sends the public key to the server and the connection is allowed if the user has authorized the public key.

The SSHClientCertType field specifies the type of the key store specified by SSHClientCert. If the store is password protected, specify the password in SSHClientCertPassword.

Some types of key stores are containers which may include multiple keys. By default the Sync App will select the first key in the store, but you can specify a specific key using SSHClientCertSubject.

The password of the SSHClientCert key if it has one.

Remarks

This property is only used when authenticating to SFTP servers with SSHAuthMode set to PublicKey and SSHClientCert set to a private key.

The subject of the SSH client certificate.

Remarks

When loading a certificate the subject is used to locate the certificate in the store.

If an exact match is not found, the store is searched for subjects containing the value of the property.

If a match is still not found, the property is set to an empty string, and no certificate is selected.

The special value "*" picks the first certificate in the certificate store.

The certificate subject is a comma separated list of distinguished name fields and values. For instance "CN=www.server.com, OU=test, C=US, [email protected]". Common fields and their meanings are displayed below.

If a field value contains a comma it must be quoted.

The type of SSHClientCert private key.

Remarks

This property can take one of the following values:

The SSH server.

Remarks

The SSH server.

The SSH port.

Remarks

The SSH port.

The SSH user.

Remarks

The SSH user.

The SSH password.

Remarks

The SSH password.

The SSH server fingerprint.

Remarks

The SSH server fingerprint.

Whether to tunnel the DB2 connection over SSH. Use SSH.

Remarks

By default the Sync App will attempt to connect directly to DB2. When this option is enabled, the Sync App will instead establish an SSH connection with the SSHServer and tunnel the connection to DB2 through it.

This section provides a complete list of the Firewall properties you can configure in the connection string for this provider.

The protocol used by a proxy-based firewall.

Remarks

This property specifies the protocol that the Sync App will use to tunnel traffic through the FirewallServer proxy.

The name or IP address of a proxy-based firewall.

Remarks

This property specifies the IP address, DNS name, or host name of a proxy allowing traversal of a firewall. The protocol is specified by FirewallType: Use FirewallServer with this property to connect through SOCKS or do tunneling.

The TCP port for a proxy-based firewall.

Remarks

This specifies the TCP port for a proxy allowing traversal of a firewall. Use FirewallServer to specify the name or IP address. Specify the protocol with FirewallType.

The user name to use to authenticate with a proxy-based firewall.

Remarks

The FirewallUser and FirewallPassword properties are used to authenticate against the proxy specified in FirewallServer and FirewallPort, following the authentication method specified in FirewallType.

A password used to authenticate to a proxy-based firewall.

Remarks

This property is passed to the proxy specified by FirewallServer and FirewallPort, following the authentication method specified by FirewallType.

This section provides a complete list of the Logging properties you can configure in the connection string for this provider.

Core modules to be included in the log file.

Remarks

Only the modules specified (separated by ';') will be included in the log file. By default all modules are included.

See the Logging page for an overview.

This section provides a complete list of the Schema properties you can configure in the connection string for this provider.

A path to the directory that contains the schema files defining tables, views, and stored procedures.

Remarks

The path to a directory which contains the schema files for the Sync App (.rsd files for tables and views, .rsb files for stored procedures). The folder location can be a relative path from the location of the executable. The Location property is only needed if you want to customize definitions (for example, change a column name, ignore a column, and so on) or extend the data model with new tables, views, or stored procedures.

If left unspecified, the default location is "%APPDATA%\\CData\\DB2 Data Provider\\Schema" with %APPDATA% being set to the user's configuration directory:

This property restricts the schemas reported to a subset of the available schemas. For example, BrowsableSchemas=SchemaA,SchemaB,SchemaC.

Remarks

Listing the schemas from databases can be expensive. Providing a list of schemas in the connection string improves the performance.

This property restricts the tables reported to a subset of the available tables. For example, Tables=TableA,TableB,TableC.

Remarks

Listing the tables from some databases can be expensive. Providing a list of tables in the connection string improves the performance of the Sync App.

This property can also be used as an alternative to automatically listing views if you already know which ones you want to work with and there would otherwise be too many to work with.

Specify the tables you want in a comma-separated list. Each table should be a valid SQL identifier with any special characters escaped using square brackets, double-quotes or backticks. For example, Tables=TableA,[TableB/WithSlash],WithCatalog.WithSchema.`TableC With Space`.

Note that when connecting to a data source with multiple schemas or catalogs, you will need to provide the fully qualified name of the table in this property, as in the last example here, to avoid ambiguity between tables that exist in multiple catalogs or schemas.

Restricts the views reported to a subset of the available tables. For example, Views=ViewA,ViewB,ViewC.

Remarks

Listing the views from some databases can be expensive. Providing a list of views in the connection string improves the performance of the Sync App.

This property can also be used as an alternative to automatically listing views if you already know which ones you want to work with and there would otherwise be too many to work with.

Specify the views you want in a comma-separated list. Each view should be a valid SQL identifier with any special characters escaped using square brackets, double-quotes or backticks. For example, Views=ViewA,[ViewB/WithSlash],WithCatalog.WithSchema.`ViewC With Space`.

Note that when connecting to a data source with multiple schemas or catalogs, you will need to provide the fully qualified name of the table in this property, as in the last example here, to avoid ambiguity between tables that exist in multiple catalogs or schemas.

This section provides a complete list of the Miscellaneous properties you can configure in the connection string for this provider.

Prepare a query statement before its execution.

Remarks

If the AllowPreparedStatement property is set to false, statements are parsed each time they are executed. Setting this property to false can be useful if you are executing many different queries only once.

If you are executing the same query repeatedly, you will generally see better performance by leaving this property at the default, true. Preparing the query avoids recompiling the same query over and over. However, prepared statements also require the Sync App to keep the connection active and open while the statement is prepared.

A Boolean value used to indicate whether parameters, result data, and schema information for iDB2CharBitData and iDB2VarCharBitData objects are treated as String values or as Byte array values.

Remarks

Setting this property to true allows the application to retrieve the data as translated character strings instead of as an array of bytes. The default value is false.

An Int32 value used to indicate which CCSID is used to translate iDB2CharBitData and iDB2VarCharBitData types when the CharBitDataAsString property is set to true. This property is ignored when CharBitDataAsString is set to false.

Remarks

The default value is -1, and indicates that the host server job CCSID is used for translation. The link to the DB2 CCSID list is: https://www.ibm.com/docs/en/db2/11.5?topic=miexdc-ccsids-encoding-names The link to the DB2 iSeries/AS400 CCSID list is: https://www.ibm.com/docs/en/i/7.5?topic=information-ccsid-values-defined-i

Limits the number of rows returned rows when no aggregation or group by is used in the query. This helps avoid performance issues at design time.

Remarks

Limits the number of rows returned rows when no aggregation or group by is used in the query. This helps avoid performance issues at design time.

These hidden properties are used only in specific use cases.

Remarks

The properties listed below are available for specific use cases. Normal driver use cases and functionality should not require these properties.

Specify multiple properties in a semicolon-separated list.

Integration and Formatting

This option passes the query to the DB2 server as is.

Remarks

When this is set, queries are passed through directly to DB2.

This property allows you to specify a switching mode to select a server from AlternateServers as the active server.

Remarks

There are three switching modes available: None: Always use the default server. Failover: When the active server cannot be accessed, another server in AlternateServers will be used as the active server. LoadBalance: This option includes the feature of "Failover". In addition, the active server will also be changed after a transcation is committed.

Specify SwitchMode:

SwitchMode=Failover;

This property allows you to specify a switching strategy to select a server from AlternateServers as the active server.

Remarks

There are three switching strategies available: Sequence: Always use the next server in AlternateServers as the active server. Random: Use a random server in AlternateServers as the active server. BestResponse: Always use the server with the shortest response time.

Specify SwitchStrategy:

SwitchStrategy=Random;

The value in seconds until the timeout error is thrown, canceling the operation.

Remarks

If Timeout = 0, operations do not time out. The operations run until they complete successfully or until they encounter an error condition.

If Timeout expires and the operation is not yet complete, the Sync App throws an exception.