接続の確立

Stripe への接続を追加

Stripe への接続を追加するには：

アプリケーションコンソールで、接続ページに移動します。
接続の追加パネルで、追加したい接続のアイコンを選択します。
Stripe アイコンが利用できない場合は、Add More アイコンをクリックしてCData サイトからStripe コネクタをダウンロードおよびインストールします。

必須プロパティについては、設定タブを参照してください。

通常必須ではない接続プロパティについては、高度な設定タブを参照してください。

Stripe への接続

Stripe は、本番API キーまたはOAuth のいずれかによる認証をサポートします。

Note： 接続して認証した後にStripe から返されるデータを絞り込むには、 AccountId をデータを取得したいConnected Account Id に設定します。そのアカウントのアカウントId を取得するには、Stripe ダッシュボードに移動して Connect アカウントのメニュー項目を見つけます。そのリストをクリックします。Stripe は現在接続されているすべてのアカウントのドロップダウンリストを表示します。

本番API キー

本番API キーで接続するには、以下の2つの設定パラメータを設定する必要があります。

AuthScheme = APIKey。
LiveAPIKey = 本番API キーの値。

本番API キーの値を取得するには：

Stripe ダッシュボードにログインします。
開発者 -> API キー -> シークレットキー -> 本番環境のキーを表示 に移動します。

OAuth

Stripe はOAuth 認証のみサポートします。すべてのOAuth フローで、この認証を有効にするにはAuthScheme をOAuth に設定する必要があります。

以下のサブセクションでは、3つの一般的な認証フローでのStripe への認証について詳しく説明します。

デスクトップ：ユーザーのローカルマシン上でのサーバーへの接続で、テストやプロトタイピングによく使用されます。埋め込みOAuth またはカスタムOAuth で認証されます。
Web：共有ウェブサイト経由でデータにアクセスします。カスタムOAuth でのみ認証されます。
ヘッドレスサーバー：他のコンピュータやそのユーザーにサービスを提供する専用コンピュータで、モニタやキーボードなしで動作するように構成されています。埋め込みOAuth またはカスタムOAuth で認証されます。

カスタムOAuth アプリケーションの作成方法と、埋め込みOAuth 認証情報を持つ認証フローでもカスタムOAuth アプリケーションを作成したほうがよい場合の説明については、カスタムOAuth アプリケーションの作成を参照してください。

Stripe で利用可能な接続文字列プロパティの全リストは、Connection を参照してください。

アクセストークンの期限が切れたときは、Sync App は自動でアクセストークンをリフレッシュします。

OAuth アクセストークンの自動リフレッシュ：

Sync App がOAuth アクセストークンを自動的にリフレッシュするようにするには、次のように設定します。

はじめてデータに接続する際、次の接続プロパティを設定します。
- InitiateOAuth = REFRESH。
- OAuthClientId = アプリケーション設定のクライアントId。
- OAuthClientSecret = アプリケーション設定のクライアントシークレット。
- OAuthAccessToken = GetOAuthAccessToken によって返されたアクセストークン。
- OAuthSettingsLocation = Sync App がOAuth 値を保存する場所のパス。これは接続間で維持されます。
その後のデータ接続では、以下を設定します。
- InitiateOAuth
- OAuthSettingsLocation

OAuth アクセストークンの手動リフレッシュ：

OAuth アクセストークンを手動でリフレッシュするために必要な唯一の値は、OAuth リフレッシュトークンです。

ExpiresIn 期間（GetOAuthAccessToken が返す）が経過した後にOAuthAccessToken を手動でリフレッシュするには、RefreshOAuthAccessToken ストアドプロシージャを呼び出します。
次の接続プロパティを設定します。
- OAuthClientId = アプリケーション設定のクライアントId。
- OAuthClientSecret = アプリケーション設定のクライアントシークレット。
RefreshOAuthAccessToken を呼び出し、OAuthRefreshToken にGetOAuthAccessToken によって返されたOAuth リフレッシュトークンを設定します。
新しいトークンが取得できたら、OAuthAccessToken プロパティにRefreshOAuthAccessToken によって返された値を設定します。Open は、新規接続を開きます。

OAuth リフレッシュトークンを保存し、OAuth アクセストークンの有効期限が切れた後に手動でリフレッシュできるようにします。

高度な機能

このセクションでは、Stripe Sync App の高度な機能を厳選して説明します。

ユーザー定義ビュー

Sync App を使用すると、事前設定されたクエリによって内容が決定されるユーザー定義ビューと呼ばれる仮想テーブルを定義できます。このビューは、ドライバーに発行されるクエリを直接制御できない場合に有効です。カスタムビューの作成と設定の概要については、ユーザー定義ビューを参照してください。

SSL の設定

SSL の設定を使用して、Sync App が証明書のネゴシエーションをどのように扱うかを調整します。さまざまな証明書形式を選択できます。詳しくは、接続文字列オプションにあるSSLServerCert プロパティを参照してください。

ファイアウォールとプロキシ

Windows プロキシとHTTP プロキシを含むファイアウォールとプロキシに合致するようSync App を設定します。トンネル接続を設定することもできます。

クエリ処理

Sync App は、Stripe にできるだけ多くのSELECT ステートメント処理をオフロードし、残りのクエリをクライアント側のインメモリで処理します。

詳しくはクエリ処理を参照してください。

ログ

CData ログを調整するために使用可能な設定の概要については、ログを参照してください。基本的なロギングでは、次の2つの接続プロパティを設定するだけです。LogModules 接続プロパティを使用してログに記録する情報のサブセットを選択できる、より洗練されたロギングをサポートする多数の機能があります。

SSL の設定

SSL 設定のカスタマイズ

デフォルトでは、Sync App はサーバーの証明書をシステムの信頼できる証明書ストアと照合してSSL / TLS のネゴシエーションを試みます。

別の証明書を指定するには、利用可能なフォーマットについてSSLServerCert プロパティを参照してください。

ファイアウォールとプロキシ

Firewall またはProxy 経由の接続

HTTP プロキシ

Windows のシステムプロキシ経由の接続では、接続プロパティを追加で設定する必要はありません。他のプロキシに接続するには、ProxyAutoDetect をfalse に設定します。

さらにHTTP プロキシへの認証には、ProxyServer とProxyPort に加えてProxyAuthScheme、ProxyUser、およびProxyPassword を設定します。

その他のプロキシ

次のプロパティを設定します。

プロキシベースのファイヤーウォールを使用するには、FirewallType、FirewallServer、およびFirewallPort を設定します。
接続をトンネルするには、FirewallType をTUNNEL に設定します。
認証するには、FirewallUser とFirewallPassword を設定します。
SOCKS プロキシへの認証には、さらにFirewallType をSOCKS5 に設定します。

データモデル

CData Sync App は、Stripe API をリレーショナルテーブル、ビュー、およびストアドプロシージャとしてモデル化します。これらは、簡単なテキストベースのコンフィギュレーションファイルであるスキーマファイルにて定義されます。

このセクションでは、API の制限および要件について説明します。既定のSupportEnhancedSQL 機能を使って、これらの制限の大半を回避できます。

テーブル

Sync App は、データをテーブルにモデル化し、標準SQL でのクエリおよび更新を容易にします。

ビュー

ビューは変更ができないテーブルです。一般的に、読み取り専用のデータはビューとして表示されます。

ストアドプロシージャ

ストアドプロシージャはStripe API の他の部分を表示します。

テーブル

Sync App はStripe のデータを、標準のSQL ステートメントを使用してクエリできるリレーショナルデータベースのテーブルのリストとしてモデル化します。

Stripe Connector for CData Sync テーブル


Name	Description
Accounts	Create, update, delete, and query the Accounts you manage in Stripe.
BankAccounts	Create, update, delete, and query the available Bank Accounts in Stripe.
BankAccountTokens	Create and query the available Bank Account Tokens in Stripe.
Cards	Create, update, delete and query the available Cards in Stripe.
CardTokens	Create and query the available Card Tokens in Stripe.
Charges	Create, update, and query the available Charges in Stripe.
CheckoutSession	Creates and queries the customer's session as they pay for one-time purchases or subscriptions through Checkout or Payment Links.
Coupons	Get and delete the available discount of a Subscription.
CreditNotes	Creates, updates, and queries a credit note to adjust an invoice's amount after the invoice is finalized.
Customers	Create, update, delete, and query the available Customers in Stripe.
Disputes	Query the available Disputes in Stripe.
InvoiceItems	Create, update, delete, and query the available invoices items in Stripe.
Invoices	Create, update, delete, and query the available Invoices in Stripe.
PaymentIntent	A PaymentIntent guides you through the process of collecting a payment from your customer.
PaymentLinks	Create, update, and query the PaymentLinks in Stripe.
PaymentMethods	Create, update and query the available PaymentMethods in Stripe.
Payouts	Query the available Payouts in Stripe.
Persons	Usage information for the operation Persons.rsd.
Plans	Create, update, delete, and query the available Plans in Stripe.
Prices	Create, update, and query the available prices in Stripe.
Products	Query the available products in Stripe.
PromotionCodes	Creates, updates, and retrieves a promotion code that represents a customer-redeemable code for a coupon.
Quotes	Creates, updates, and queries the quotes available.
Refunds	Create and query the available refunds in Stripe.
ShippingRates	Query the available Shipping rates in Stripe.
SubscriptionItems	Create, update, delete, and query the available subscription items in Stripe.
Subscriptions	Create, update, delete, and query the available Subscriptions in Stripe.
TaxRates	Creates, updates, and queries the tax rates that applies to Invoices, Subscriptions, and Checkout Sessions to collect tax.
TopUps	Creates, updates, and queries the top-up of the Stripe balance.
TransferReversals	Create, update, and query the available reversals belonging to a specific transfer.
Transfers	Create, update, and query the available transfers in Stripe.
UsageRecords	Creates and retrieves the customer usage and metrics to Stripe for metered billing for subscription prices.
ValueListItems	Creates, deletes, and queries the Values list items.
ValueLists	Creates, updates, deletes, and queries values in a list.

Accounts

Create, update, delete, and query the Accounts you manage in Stripe.

Table Specific Information

Select

Server-Side Query Support

The Sync App uses the Stripe API to filter the results by the following columns and operators while the rest of the filter is executed client-side within the Sync App.

Id support the following operator: =.
Created support the following operators: <,>>=,<,<=, =.
AccountId support the following operator: =.

The provider supports the use of all columns as criteria in the WHERE clause of SELECT statements, as long as SupportEnhancedSQL is set to True. If SupportEnhancedSQL property is set to False, you still can retrieve an Account by specifying its Id:

SELECT * FROM Accounts WHERE Id = 'MyId'

Accounts created after a specific date (Created may be used with the >, >=, <, <=, or = conditions and may be used twice to specify a range):

SELECT * FROM Accounts WHERE Created='2018-11-16 10:59:00.0'

Insert

To create a new account, Email is required if Managed is not specified or is set to false and Capabilities is required. Capabilities is an aggregate column. See the example below on how to insert into this column.

INSERT INTO Accounts (IndividualFullNameAliases,Country, Email,Type,BusinessType,CapabilitiesTransfers) VALUES ('[\"alias1\",\"alias2\"]','US', '[email protected]','custom','individual','{\"requested\":\"true\"}')

Update

To update an Account, specify Id of the Account:

UPDATE Accounts SET BusinessType='company' WHERE Id = 'acct_1OPti7GbN1KxSEes'

Delete

To delete an Account, specify the Id of the account.

DELETE FROM Account WHERE Id = 'acct_1A0XVyFF36eOzuU5'

Columns


Name	Type	ReadOnly	References	Description
Id [KEY]	String	True		The unique identifier for the account.
BusinessType	String	False		The business type of company 使用できる値は次のとおりです。individual, company, non_profit, government_entity
ChargesEnabled	Boolean	True		Whether or not the account can create live charges.
Country	String	False		The country of the account.
IsController	Boolean	True		Whether or not the Connect application retrieving the resource controls the account.
ControllerType	String	True		The controller type.
Created	Datetime	True		Time at which the account was connected.
DefaultCurrency	String	False		The currency this account has chosen to use as the default.
DetailsSubmitted	Boolean	True		Whether or not account details have been submitted yet. Standalone accounts cannot receive transfers before this is true.
Email	String	False		The primary email address of the user.
ExternalAccountsAggregate	String	True		External accounts (bank accounts and/or cards) currently attached to this account.
FutureRequirementsAggregate	String	True		Information about the upcoming new requirements for the account, including what information needs to be collected, and by when.
PayoutsEnabled	Boolean	True		Whether Stripe can send payouts to this account.
SettingsAggregate	String	True		Options for customizing how the account functions within Stripe.
BusinessProfileSupportEmail	String	False		The publicly shareable email address that can be reached for support for this account.
BusinessProfileSupportPhone	String	False		The publicly visible support phone number for the business.
BusinessProfileSupportAddressCity	String	False		City, district, suburb, town, or village.
BusinessProfileSupportAddressCountry	String	False		Two-letter country code.
BusinessProfileSupportAddressLine1	String	False		Address line 1 (e.g., street, PO Box, or company name).
BusinessProfileSupportAddressLine2	String	False		Address line 2 (e.g., apartment, suite, unit, or building).
BusinessProfileSupportAddressPostalCode	String	False		ZIP or postal code.
BusinessProfileSupportAddressState	String	False		State, county, province, or region.
BusinessProfileSupportUrl	String	False		The publicly shareable URL that can be reached for support for this account
BusinessProfileProductDescription	String	False		An internal-only description of the product or service provided. This is used by Stripe in the event the account gets flagged for potential fraud.
BusinessProfileMcc	String	False		The merchant category code for the account.
BusinessProfileMonthlyEstimatedRevenueAmount	Integer	False		A non-negative integer representing how much to charge in the smallest currency unit.
BusinessProfileMonthlyEstimatedRevenueCurrency	String	False		Three-letter ISO currency code, in lowercase. Must be a supported currency.
BusinessProfileName	String	False		The publicly visible name of the business.
BusinessProfileUrl	String	False		The publicly visible website of the business.
TosAcceptanceDate	Datetime	False		The Unix timestamp marking when the account representative accepted their service agreement.
TosAcceptanceIp	String	False		The IP address from which the account representative accepted their service agreement.
TosAcceptanceServiceAgreement	String	False		The user's service agreement type.
TosAcceptanceUserAgent	String	False		The user agent of the browser from which the account representative accepted their service agreement.
TransferSchedule	String	True		When payments collected are automatically paid out to the bank account of the account holder.
Type	String	False		A type value is required when creating accounts. The standard type replaces managed: false, and the custom type replaces managed: true. 使用できる値は次のとおりです。standard, express, custom
RequirementsAggregate	String	True		The state of the information requests for the account, including what information is needed and by when it must be provided.
TransfersEnabled	Boolean	True		Whether or not Stripe will send automatic transfers for this account.
MetadataAggregate	String	False		The account metadata object.
Capabilities	String	True		In the Accounts API, the requested_capabilities property is now required at creation time for Custom accounts in all countries. See Account capabilities for more information.
CompanyAddressCity	String	False		City, district, suburb, town, or village.
CompanyAddressCountry	String	False		Two-letter country code.
CompanyAddressLine1	String	False		Address line 1 (e.g., street, PO Box, or company name).
CompanyAddressLine2	String	False		Address line 2 (e.g., apartment, suite, unit, or building).
CompanyAddressPostalCode	String	False		ZIP or postal code.
CompanyAddressState	String	False		State, county, province, or region.
CompanyDirectorsProvided	Boolean	False		Whether the company's directors have been provided.
CompanyExecutivesProvided	Boolean	False		Whether the company's executives have been provided.
CompanyExportLicenseId	String	False		The export license ID number of the company, also referred as Import Export Code (India only).
CompanyExportPurposeCode	String	False		The purpose code to use for export transactions (India only).
CompanyName	String	False		The company's legal name.
CompanyOwnersProvided	Boolean	False		Whether the company's owners have been provided.
CompanyOwnershipDeclarationDate	Datetime	False		The Unix timestamp marking when the beneficial owner attestation was made.
CompanyOwnershipDeclarationIp	String	False		The IP address from which the beneficial owner attestation was made.
CompanyOwnershipDeclarationUserAgent	String	False		The user agent string from the browser where the beneficial owner attestation was made.
CompanyPhone	String	False		The company's phone number
CompanyRegistrationNumber	String	False		The identification number given to a company when it is registered or incorporated, if distinct from the identification number used for filing taxes.
CompanyStructure	String	False		The category identifying the legal structure of the company or legal entity.
CompanyTaxId	String	False		The business ID number of the company, as appropriate for the company’s country.
CompanyVatId	String	False		The VAT number of the company.
CompanyTaxIdProvided	Boolean	True		Whether the company's business ID number was provided.
CompanyTaxIdRegistrar	String	False		The jurisdiction in which the tax_id is registered (Germany-based companies only).
CompanyVatIdProvided	Boolean	True		Whether the company's business VAT number was provided.
CompanyVerificationDocumentBack	String	False		A document for the company. The back of a document returned by a file upload with a purpose value of additional_verification.
CompanyVerificationDocumentFront	String	False		A document for the company. The front of a document returned by a file upload with a purpose value of additional_verification.
IndividualId	String	True		Unique identifier for the individual.
IndividualObject	String	False		String representing the object's type.
IndividualAccount	String	False		The account the individual is associated with.
IndividualAddressCity	String	False		City, district, suburb, town, or village.
IndividualAddressCountry	String	False		Two-letter country code.
IndividualAddressLine1	String	False		Address line 1 (e.g., street, PO Box, or company name).
IndividualAddressLine2	String	False		Address line 2 (e.g., apartment, suite, unit, or building).
IndividualAddressPostalCode	String	False		ZIP or postal code.
IndividualAddressState	String	False		State, county, province, or region.
IndividualDOBDay	Integer	False		The day of birth, between 1 and 31.
IndividualDOBMonth	Integer	False		The month of birth, between 1 and 12.
IndividualDOBYear	Integer	False		The four-digit year of birth.
IndividualEmail	String	False		The individual's email address.
IndividualFirstName	String	False		The individual's first name.
IndividualFullNameAliases	String	False		A list of alternate names or aliases that the individual is known by.
IndividualGender	String	False		The individual's gender.
IndividualIdNumber	String	False		The government-issued ID number of the individual, as appropriate for the representative’s country.
IndividualIdNumberSecondary	String	False		The government-issued secondary ID number of the individual, as appropriate for the representative’s country, will be used for enhanced verification checks.
IndividualLastName	String	False		The individual's last name.
IndividualMaidenName	String	False		The individual's maiden name.
IndividualMetadataAggregate	String	False		Metadata for the individual
IndividualNationality	String	False		The country where the person is a national.
IndividualPhone	String	False		The individual's phone number.
IndividualPoliticalExposure	String	False		Indicates if the person or any other closely related persons declares that they have held an important public job or function.
IndividualRegisteredAddressCity	String	False		City, district, suburb, town, or village.
IndividualRegisteredAddressCountry	String	False		Two-letter country code.
IndividualRegisteredAddressLine1	String	False		Address line 1 (e.g., street, PO Box, or company name).
IndividualRegisteredAddressLine2	String	False		Address line 2 (e.g., apartment, suite, unit, or building).
IndividualRegisteredAddressPostalCode	String	False		ZIP or postal code.
IndividualRegisteredAddressState	String	False		State, county, province, or region.
IndividualSSNLast4	String	False		The last four digits of the individual's Social Security Number (U.S. only).
IndividualVerificationAdditionalDocumentBack	String	False		The individual's verification document information. The back of an ID returned by a file upload with a purpose value of identity_document.
IndividualVerificationAdditionalDocumentFront	String	False		The individual's verification document information. The front of an ID returned by a file upload with a purpose value of identity_document.
IndividualVerificationDocumentBack	String	False		The individual's verification document information. The back of an ID returned by a file upload with a purpose value of identity_document.
IndividualVerificationDocumentFront	String	False		The individual's verification document information. The front of an ID returned by a file upload with a purpose value of identity_document.

Pseudo-Columns

SELECT ステートメントのWHERE 句では、疑似カラムフィールドを使用して、データソースから返されるタプルを詳細に制御することができます。


Name	Type	Description
AccountId	String	The Id of the connected account
CapabilitiesTransfers	Boolean	In the Accounts API, the requested_capabilities property is now required at creation time for Custom accounts in all countries. See Account capabilities for more information.This is only for insert
CapabilitiesCardPayments	Boolean	In the Accounts API, the requested_capabilities property is now required at creation time for Custom accounts in all countries. See Account capabilities for more information. This is only for insert

BankAccounts

Create, update, delete, and query the available Bank Accounts in Stripe.

Table Specific Information

Select

Server-Side Query Support

The Sync App uses the Stripe API to filter the results by the following columns and operators while the rest of the filter is executed client-side within the Sync App.

Id, CustomerId and AccountId support the following operator: =

To query BankAccounts table, CustomerId is required:

SELECT * FROM BankAccounts WHERE CustomerId = 'cus_12345678'

In addition to CustomerId, provider supports all columns to be used as criteria in the WHERE clause of SELECT statement, as long as SupportEnhancedSQL is set to True. If SupportEnhancedSQL property is set to False, you still can retrieve a Bank Account by specifying its Id:

SELECT * FROM BankAccounts WHERE Id = 'ba_12345678' AND CustomerId = 'cus_12345678'

Insert

To create a new Bank Account, specify Country, Currency, and AccountNumber. CustomerId is required.

INSERT INTO BankAccounts (CustomerId, Country, Currency, AccountHolderName, AccountHolderType, AccountNumber, RoutingNumber) VALUES ('cus_1kghj5755loee', 'US', 'usd', 'Sab nu', 'individual', '000123456789', '110000000')

INSERT INTO BankAccounts (AccountNumber,Country,currency,[Object],AccountHolderName,AccountHolderType,MetadataAggregate,CustomerId,RoutingNumber) VALUES (000999999991,'US','usd','bank_account','Test1','company','[{\"Check\":\"123\",\"QWERTY\":\"456\"}]','cus_PEDFTqrddhgBaF',110000000)

Update

To update a Bank Account, specify an Id and a CustomerId.

UPDATE BankAccounts SET AccountHolderName = 'My Name', AccountHolderType = 'individual' WHERE Id = 'ba_12345678' AND CustomerId = 'cus_12345678'

Delete

To delete a Bank Account, specify an Id and a CustomerId.

DELETE FROM BankAccounts WHERE Id = 'ba_12345678' AND CustomerId = 'cus_12345678

Columns


Name	Type	ReadOnly	References	Description
Id [KEY]	String	True		The Id for the bank account.
CustomerId [KEY]	String	False		The customer id this account belongs to.
Account	String	True		The account id.
AccountHolderName	String	False		The name of the person or business that owns the bank account.
AccountHolderType	String	False		The type of entity that holds the account.
AccountNumber	String	False		The type of entity that holds the account.
BankName	String	True		Name of the bank associated with the routing number.
Country	String	False		Two-letter ISO code representing the country the bank account is located in.
Currency	String	False		Three-letter ISO currency code representing the currency paid out to the bank account.
DefaultForCurrency	Boolean	True		This indicates whether or not this bank account is the default external account for its currency.
Fingerprint	String	True		Uniquely identifies this particular bank account. You can use this attribute to check whether two bank accounts are the same.
Last4	String	True		Last 4 digits of the bank account.
RoutingNumber	String	False		The routing transit number for the bank account.
Status	String	True		The status of the account.
AccountType	String	True		The bank account type. This can only be checking or savings in most countries. In Japan, this can only be futsu or toza.
MetadataAggregate	String	False		A list of up to 8 URLs of images for this product, meant to be displayable to the customer.
Object	String	False		String representing the object's type. Objects of the same type share the same value. 使用できる値は次のとおりです。bank_account
AvailablePayoutMethods	String	True		A set of available payout methods for this bank account. Only values from this set should be passed as the method when creating a payout.

Pseudo-Columns

SELECT ステートメントのWHERE 句では、疑似カラムフィールドを使用して、データソースから返されるタプルを詳細に制御することができます。


Name	Type	Description
Source	String	The token ID
AccountId	String	The Id of the connected account to get back accounts for

BankAccountTokens

Create and query the available Bank Account Tokens in Stripe.

Table Specific Information

Select

Server-Side Query Support

The Sync App uses the Stripe API to filter the results by the following columns and operators while the rest of the filter is executed client-side within the Sync App.

Id and AccountId supports the following operator: =.

To query BankAccountTokens table, the Id of desired token is required:

SELECT * FROM BankAccountTokens WHERE Id = 'btok_12345678'

Insert

To insert into BankAccountTokens, Country, and AccountNumber are required:

INSERT INTO BankAccountTokens (Country, Currency, AccountHolderName, AccountHolderType, AccountNumber, RoutingNumber)  VALUES ('US', 'USD', 'Sab nu', 'individual', '000123456789', '110000000')

Update

Update is not supported.

Delete

Delete is not supported.

Columns


Name	Type	ReadOnly	References	Description
Id [KEY]	String	True		The Id of the token.
BankAccountId	String	True		The bank account this token will represent.
AccountHolderName	String	False		The name of the person or business that owns the bank account.
AccountHolderType	String	False		The type of entity that holds the account.
AccountType	String	False		The type of entity that holds the account type.
AccountNumber	String	False		The type of entity that holds the account number.
BankName	String	True		Name of the bank associated with the routing number.
Fingerprint	String	True		Uniquely identifier.
Last4	String	True		The last 4 digits of the bank account number.
RoutingNumber	String	False		The routing transit number for the bank account.
Status	String	True		Status of the account.
Country	String	False		Two-letter ISO code representing the country the bank account/card is located in.
Currency	String	False		The currency of the card.
ClientIp	String	True		The IP address of the client that generated the token.
Created	Datetime	True		The datetime of the token.
Used	Boolean	True		Whether or not this token has already been used.
LiveMode	Boolean	True		Has the value true if the object exists in live mode or the value false if the object exists in test mode.
Type	String	True		Type of token.

Pseudo-Columns

SELECT ステートメントのWHERE 句では、疑似カラムフィールドを使用して、データソースから返されるタプルを詳細に制御することができます。


Name	Type	Description
CustomerId	String	The Id of the customer to create a token for.
AccountId	String	The Id of the connected account to get bank account tokens for

Cards

Create, update, delete and query the available Cards in Stripe.

Table Specific Information

This table is deprecated. Use the PaymentMethods table instead.

Select

Server-Side Query Support

The Sync App uses the Stripe API to filter the results by Id, CustomerId and AccountId. They support equals (=) operator.

The rest of the filter is executed client-side within the Sync App.

To query the Cards table, you must specify a CustomerId:

SELECT * FROM Cards WHERE CustomerId = 'cus_12345678'

In addition to the CustomerId, Stripe supports the use of all columns in the WHERE clause of a SELECT statement, if SupportEnhancedSQL is set to True. If you set the SupportEnhancedSQL property to False, you can still retrieve a Card by specifying its Id:

SELECT * FROM Cards WHERE CustomerId = 'cus_12345678' AND Id = 'ca_12345678'

Insert

You can insert a Card Token and then insert the Token Id to Cards:

INSERT INTO CardTokens (ExpMonth, ExpYear, Number) VALUES (11, 2018, 4242424242424242 )
INSERT INTO Cards (CustomerId, Token) VALUES ('cus_123456778', 'tok_1234345565' )
INSERT INTO Cards (CustomerId,ExpMonth,ExpYear,Number,Object,Country) VALUES ('cus_PARXAI77xUsWw1',6,'2025','4242424242424242','card','russia')

Update

To update a Card, specify both the Id and CustomerId:

UPDATE Cards SET ExpMonth = '06', ExpYear = '2018', AddressCity = 'Houghton Street London' WHERE Id = 'ca_12345678' AND CustomerId = 'cus_123456778'

Delete

To delete a Card, specify both the Id and CustomerId:

DELETE FROM Cards WHERE Id = 'ca_12345678' AND CustomerId = 'cus_123456778'

Columns


Name	Type	ReadOnly	References	Description
Id [KEY]	String	True		The card Id.
CustomerId [KEY]	String	False		The customer Id this card belongs to.
ExpMonth	Integer	False		The card expiry month.
ExpYear	Integer	False		The card expiry year.
Currency	String	False		Only applicable on accounts (not customers or recipients). The card can be used as a transfer destination for funds in this currency.
Account	String	True		The account Id this card belongs to.
Token	String	False		The token Id.
AddressCity	String	False		The city address.
AddressCountry	String	False		Billing address country, if provided when creating card.
AddressLine1	String	False		The address line 1.
AddressLine1Check	String	True		If AddressLine1 was provided. Possible values: pass, fail, unavailable, or unchecked.
AddressLine2	String	False		The address line 2.
AddressState	String	False		The address state.
AddressZip	String	False		The address ZIP.
AddressZipCheck	String	True		If AddressZip was provided. Possible values: pass, fail, unavailable, or unchecked.
Brand	String	True		Card brand.
Country	String	True		Two-letter ISO code representing the country of the card. You could use this attribute to get a sense of the international breakdown of cards you have collected.
CvcCheck	String	True		If a CVC was provided. Possible values: pass, fail, unavailable, or unchecked.
Cvc	String	False		Card security code. Highly recommended to always include this value, but it’s required only for accounts based in European countries.
DefaultForCurrency	Boolean	False		Only applicable on accounts (not customers or recipients). This indicates whether or not this card is the default external account for its currency.
Number	String	False		The card number.
Fingerprint	String	True		Uniquely identifies this particular card number.
Funding	String	True		Card funding type.
Last4	String	True		Last 4 digits of the card.
Name	String	False		Cardholder name.
Recipient	String	True		The recipient that this card belongs to.
TokenizationMethod	String	True		If the card number is tokenized, this is the method that was used.
Metadata	String	False		Set of key-value pairs that you can attach to an object. This can be useful for storing additional information about the object in a structured format.
Object	String	False		String representing the object's type. Objects of the same type share the same value.
AvailablePayoutMethods	String	True		A set of available payout methods for this card. Only values from this set should be passed as the method when creating a payout.
DynamicLast4	String	True		(For tokenized numbers only.) The last four digits of the device account number.

Pseudo-Columns

SELECT ステートメントのWHERE 句では、疑似カラムフィールドを使用して、データソースから返されるタプルを詳細に制御することができます。


Name	Type	Description
AccountId	String	The Id of the connected account to get cards for.

CardTokens

Create and query the available Card Tokens in Stripe.

Table Specific Information

Select

Server-Side Query Support

The Sync App uses the Stripe API to filter the results by the following columns and operators while the rest of the filter is executed client-side within the Sync App.

Id supports the following operator: =.

To query CardTokens table, the Id of desired token is required:

SELECT * FROM CardTokens WHERE Id = 'tok_12345678'

Insert

The ExpMonth, ExpYear, and Number are required to insert a new Card Token.

INSERT INTO CardTokens (ExpMonth, ExpYear, Number) VALUES (11, 2018, 4242424242424242)

INSERT INTO CardTokens (AddressCity, AddressCountry, AddressLine1, AddressLine2, AddressZip, Currency, ExpMonth, ExpYear, Name, Number, AddressState) values ('Mohali', 'INDIA', 'TestAddressLine1', 'TestAddressLine2', 123456, 'inr', '01', '2029', 'Tapan Sharma', '4242424242424242', 'Punjab')

Update

UPDATE is not supported.

Delete

Delete is not supported.

Columns


Name	Type	ReadOnly	References	Description
Id [KEY]	String	True		The Id of the token.
CardId	String	True		The Id of card (used in conjunction with a customer or recipient Id)
AddressCity	String	False		The city address of the card.
AddressCountry	String	False		The country address of the card.
AddressLine1	String	False		The address line 1.
AddressLine1Check	String	True		If address_line1 was provided.
AddressLine2	String	False		The address line 2.
AddressState	String	False		The address state.
AddressZip	String	False		The zip address.
AddressZipCheck	String	True		If address_zip was provided.
Brand	String	True		The card brand.
Country	String	True		Two-letter ISO code representing the country the bank account/card is located in.
Currency	String	False		The currency of the card.
CvcCheck	String	True		If a CVC was provided.
DynamicLast4	String	True		The last four digits of the device account number.
ExpMonth	Integer	False		The card expiration month.
ExpYear	Integer	False		The card expiration year.
Last4	String	True		Last4.
Fingerprint	String	True		Uniquely identifier.
Funding	String	True		Card funding type.
Name	String	False		Cardholder name.
MetadataAggregate	String	True		The card metadata object.
TokenizationMethod	String	True		If the card number is tokenized, this is the method that was used.
ClientIp	String	True		The IP address of the client that generated the token.
Created	Datetime	True		The datetime of the token.
Used	Boolean	True		Whether or not this token has already been used.
Number	String	False		The card number.
LiveMode	Boolean	True		Has the value true if the object exists in live mode or the value false if the object exists in test mode.
Type	String	True		Type of token.

Pseudo-Columns

SELECT ステートメントのWHERE 句では、疑似カラムフィールドを使用して、データソースから返されるタプルを詳細に制御することができます。


Name	Type	Description
CustomerId	String	The Id of the customer to create a token for.
AccountId	String	The Id of the connected account to get card tokens for.

Charges

Create, update, and query the available Charges in Stripe.

Table Specific Information

In this table only select, insert, and update operations are allowed.

Select

Server-Side Query Support

The Sync App uses the Stripe API to filter the results by the following columns and operators while the rest of the filter is executed client-side within the Sync App.

Id supports the = operator.
Amount supports the <,>>=,<=,=,!= operators.
Currency supports the =,!= operator.
CustomerId supports the =,!= operator.
BillingDetailsAddressPostalCode supports the =,!= operator.
Created supports the <,>>=,<=,=,!= operators.
Disputed supports the =,!= operator.
MetadataAggregate supports the = operator.
PaymentIntent supports the = operator.
Refunded supports the =,!= operator.
Status supports the =,!= operator.
TransferGroup supports the = operator.
AccountId supports the = operator.

The provider supports the use of all columns as criteria in the WHERE clause of SELECT statements, as long as SupportEnhancedSQL is set to True. If SupportEnhancedSQL property is set to False, you still can retrieve:

-a Charge by specifying its Id:

SELECT * FROM Charges WHERE Id = 'ch_12345678'

-Charges that belong to a Customer:

SELECT * FROM Charges WHERE CustomerId = 'cus_12345678'

-Charges created after a specific date (Created may be used with the >, >=, <, <=, or = conditions and may be used twice to specify a range):

SELECT * FROM Charges WHERE Created > '2016-01-03'

Insert

Amount, Currency and Customer or Source columns are required to charge a credit card.

INSERT INTO Charges (Amount, Currency, CustomerId) VALUES (2000, 'usd', 'cus_12345678')

Update

To modify a Charge, provide an Id.

UPDATE Charges SET Description = 'updated charge' WHERE Id = 'ch_17rPMOATXQzBWNrliIRnfI5B'

Delete

Delete is not supported.

Columns


Name	Type	ReadOnly	References	Description
Id [KEY]	String	True		The Id of the charge.
Amount	Integer	False		The amount of the charge.
Currency	String	False		The currency of the charge.
CustomerId	String	False		The customer Id of the charge.
AmountRefunded	Integer	True		The amount in cents refunded.
ApplicationFee	String	True		The application fee (if any) for the charge.
ApplicationFeeAmount	Integer	False		The amount of the application fee (if any) for the charge.
BalanceTransaction	String	True		The Id of the balance transaction that describes the impact of this charge on your account balance .
BillingDetailsAddressCity	String	True		Billing information associated with the payment method at the time of the transaction.
BillingDetailsAddressCountry	String	True		Billing information associated with the payment method at the time of the transaction.
BillingDetailsAddressLine1	String	True		Billing information associated with the payment method at the time of the transaction.
BillingDetailsAddressLine2	String	True		Billing information associated with the payment method at the time of the transaction.
BillingDetailsAddressPostalCode	String	True		Billing information associated with the payment method at the time of the transaction.
BillingDetailsAddressState	String	True		Billing information associated with the payment method at the time of the transaction.
BillingDetailsEmail	String	True		Billing information associated with the payment method at the time of the transaction.
BillingDetailsName	String	True		Billing information associated with the payment method at the time of the transaction.
BillingDetailsPhone	String	True		Billing information associated with the payment method at the time of the transaction.
Captured	Boolean	False		Whether the charge was created without capturing.
CalculatedStatementDescriptor	String	True		The full statement descriptor that is passed to card networks, and that is displayed on your customers' credit card and bank statements. Allows you to see what the statement descriptor looks like after the static and dynamic portions are combined.
Created	Datetime	True		The datetime the charge was created.
Description	String	False		The description of the charge.
Destination	String	True		The account (if any) the charge was made on behalf of.
Disputed	Boolean	True		Whether the charge has been disputed.
DisputeId	String	True		The Id of the associated dispute.
FailureCode	String	True		The error code explaining the reason for the charge failure if available.
FailureMessage	String	True		The message to the user further explaining the reason for the charge failure if available.
FraudDetailsStripeReport	String	True		Information on fraud assessments for the charge.
FraudDetailsUserReport	String	False		Information on fraud assessments for the charge.
Invoice	String	True		The Id of the invoice this charge is for if one exists.
Livemode	Boolean	True		Whether the charge is in live mode.
MetadataAggregate	String	False		The charge metadata object.
Order	String	True		The Id of the order this charge is for if one exists.
OutcomeAggregate	String	True		Details about whether the payment was accepted, and why. See understanding declines for details.
Paid	Boolean	True		If the charge succeeded or was successfully authorized for later capture.
PaymentIntent	String	True		ID of the PaymentIntent associated with this charge, if one exists.
PaymentMethod	String	True		ID of the payment method used in this charge.
PaymentMethodDetailsAggregate	String	True		Details about the payment method at the time of the transaction.
ReceiptEmail	String	False		The email address that the receipt for this charge was sent to.
ReceiptNumber	String	True		The transaction number that appears on email receipts sent for this charge.
ReceiptURL	String	True		This is the URL to view the receipt for this charge. The receipt is kept up-to-date to the latest state of the charge, including any refunds. If the charge is for an Invoice, the receipt is stylized as an Invoice receipt.
Refunded	Boolean	True		Whether the charge has been fully refunded. If the charge is only partially refunded, this attribute will still be false.
RefundsAggregate	String	True		The list of refunds that have been applied to the charge.
Review	String	True		ID of the review associated with this charge if one exists.
ShippingAddressCity	String	False		Shipping information for the charge. Shipping address. City, district, suburb, town, or village.
ShippingAddressCountry	String	False		Shipping information for the charge. Shipping address. Two-letter country code (ISO 3166-1 alpha-2)
ShippingAddressLine1	String	False		Shipping information for the charge. Shipping address. Address line 1 (e.g., street, PO Box, or company name).
ShippingAddressLine2	String	False		Shipping information for the charge. Shipping address. Address line 2 (e.g., apartment, suite, unit, or building).
ShippingAddressPostalCode	String	False		Shipping information for the charge. Shipping address. ZIP or postal code.
ShippingAddressState	String	False		Shipping information for the charge. Shipping address. State, county, province, or region.
ShippingCarrier	String	False		Shipping information for the charge. The delivery service that shipped a physical product, such as Fedex, UPS, USPS, etc.
ShippingName	String	False		Shipping information for the charge. Recipient name.
ShippingPhone	String	False		Shipping information for the charge. Recipient phone (including extension).
ShippingTrackingNumber	String	False		Shipping information for the charge. The tracking number for a physical product, obtained from the delivery service. If multiple tracking numbers were generated for this purchase, please separate them with commas.
SourceAggregate	String	False		The source of every charge is a credit or debit card.
SourceTransfer	String	True		The transfer Id that created this charge.
StatementDescriptor	String	False		The extra information about a charge.
Status	String	True		The status of the payment is either succeeded, pending, or failed.
Transfer	String	True		The Id of the transfer to the destination account.
TransferDataAmount	Integer	False		An optional dictionary including the account to automatically transfer to as part of a destination charge.
TransferDataDestination	String	False		An optional dictionary including the account to automatically transfer to as part of a destination charge.
TransferGroup	String	False		A string that identifies this transaction as part of a group.
StatementDescriptorSuffix	String	False		Provides information about the charge that customers see on their statements.
Object	String	True		String representing the object's type. Objects of the same type share the same value.
AmountCaptured	Integer	True		Amount in cents captured
Application	String	True		ID of the Connect application that created the charge.
FailureBalanceTransaction	String	True		ID of the balance transaction that describes the reversal of the balance on your account due to payment failure.
OnBehalfOf	String	False		The account (if any) the charge was made on behalf of without triggering an automatic transfer.
RadarOptionsSession	String	False		Options to configure Radar. A Radar Session is a snapshot of the browser metadata and device details that help Radar make more accurate predictions on your payments.

Pseudo-Columns

SELECT ステートメントのWHERE 句では、疑似カラムフィールドを使用して、データソースから返されるタプルを詳細に制御することができます。


Name	Type	Description
AccountId	String	The Id of the connected account to get charges for

CheckoutSession

Creates and queries the customer's session as they pay for one-time purchases or subscriptions through Checkout or Payment Links.

Table Specific Information

Select

The Sync App uses the Stripe API to filter the results by the following columns and operators:

Id supports the following operator: =.
CustomerId supports the following operator: =.
CustomerDetailsEmail supports the following operator: =.
PaymentIntentId supports the following operator: =.
PaymentLinkId supports the following operator: =.
Status supports the following operator: =.
SubscriptionId supports the following operator: =.
AccountId supports the following operator: =.

The rest of the filter is executed client-side within the Sync App.

The provider supports the use of all columns as criteria in the WHERE clause of SELECT statements, as long as SupportEnhancedSQL is set to True. If SupportEnhancedSQL property is set to False, you still can retrieve the PaymentMethods:

SELECT * FROM CheckoutSession
SELECT * FROM CheckoutSession WHERE Id = '123124'
SELECT * FROM CheckoutSession WHERE CustomerId = 'cus_N8rO0qc7j1SJJ9'
SELECT * FROM CheckoutSession WHERE CustomerDetailsEmail = '[email protected]'
SELECT * FROM CheckoutSession WHERE PaymentIntentId = 'pi_sfuniew'
SELECT * FROM CheckoutSession WHERE PaymentLinkId = 'plink_1MHJbZSC4snQ4WkOqF4MChgG'
SELECT * FROM CheckoutSession WHERE SubscriptionId = 'sub_A9WZGVTbvgBJ4t'

Insert

To create a new CheckoutSession, at a minimum Mode and SuccessUrl are required. If mode is payment or subscription, LineItemsAggregate is also required. We do not support recurring prices currently.

INSERT INTO CheckoutSession (Mode, SuccessUrl,LineItemsAggregate) VALUES ('payment', 'https://example.com/success','[{\"price\":\"price_1OPuMb2eZvKYlo2CVkxTmqYN\",\"quantity\":\"23\"}]')
INSERT INTO CheckoutSession (Mode, SuccessUrl, Currency, CustomerId) VALUES ('setup', 'https://example.com/success', 'usd', 'cus_N8rO0qc7j1SJJ9')

Columns


Name	Type	ReadOnly	References	Description
Id [KEY]	String	True		The Id of the Checkout session.
AfterExpirationRecoveryAllowPromotionCodes	Boolean	False		When set, provides configuration for actions to take if this Checkout Session expires. Enables user redeemable promotion codes on the recovered Checkout Sessions. Defaults to false
AfterExpirationRecoveryEnabled	Boolean	False		When set, provides configuration for actions to take if this Checkout Session expires. If true, a recovery url will be generated to recover this Checkout Session if it expires before a transaction is completed. It will be attached to the Checkout Session object upon expiration.
AfterExpirationRecoveryExpiresAt	Datetime	True		When set, provides configuration for actions to take if this Checkout Session expires. The timestamp at which the recovery URL will expire.
AfterExpirationRecoveryUrl	String	True		When set, provides configuration for actions to take if this Checkout Session expires. URL that creates a new Checkout Session when clicked that is a copy of this expired Checkout Session.
AllowPromotionCodes	Boolean	False		Enables user redeemable promotion codes.
AmountSubtotal	Integer	True		Total of all items before discounts or taxes are applied.
AmountTotal	Integer	True		Total of all items after discounts and taxes are applied.
AutomaticTaxEnabled	Boolean	False		Indicates whether automatic tax is enabled for the session.
AutomaticTaxStatus	String	True		The status of the most recent automated tax calculation for this session.
BillingAddressCollection	String	False		Describes whether Checkout should collect the customer's billing address. 使用できる値は次のとおりです。auto, required
CancelUrl	String	False		If set, Checkout displays a back button and customers are directed to this URL if they decide to cancel payment and return to your website.
ClientReferenceId	String	False		A unique string to reference the Checkout Session. This can be a customer Id, a cart Id, or something similar, and you can use it to reconcile the Session with your internal systems.
ClientSecret	String	True		Client secret to be used when initializing Stripe.js embedded checkout.
ConsentPromotions	String	True		Results of consent_collection for this session. If opt_in, the customer consents to receiving promotional communications from the merchant about this Checkout Session. 使用できる値は次のとおりです。opt_in, opt_out
ConsentTermsOfService	String	True		Results of consent_collection for this session. If accepted, the customer in this Checkout Session has agreed to the merchant’s terms of service. 使用できる値は次のとおりです。accepted
ConsentCollection	String	True		When set, provides configuration for the Checkout Session to gather active consent from customers.
Created	Datetime	True		The time at which the object was created. Measured in seconds since the Unix epoch.
Currency	String	False		A three-letter ISO currency code.
CurrencyConversion	String	True		Currency conversion details for automatic currency conversion sessions.
CustomFields	String	False		Collects additional information from your customer using custom fields. Up to two fields are supported.
CustomTextAfterSubmitMessage	String	False		Custom text that should be displayed after the payment confirmation button.
CustomTextShippingAddressMessage	String	False		Custom text that should be displayed alongside shipping address collection.
CustomTextSubmitMessage	String	False		Custom text that should be displayed alongside the payment confirmation button.
CustomTextTermsOfAcceptanceMessage	String	False		Custom text that should be displayed in place of the default terms of service agreement text.
CustomerId	String	False		The Id of the customer for this Session.
CustomerCreation	String	False		Configures whether a Checkout Session creates a Customer when the Checkout Session completes. 使用できる値は次のとおりです。always, if_required
CustomerDetailsAddress	String	True		The customer's address after a completed Checkout Session.
CustomerDetailsEmail	String	True		The email associated with the Customer.
CustomerDetailsName	String	True		The customer's name after a completed Checkout Session.
CustomerDetailsPhone	String	True		The customer's phone number after a completed Checkout Session.
CustomerDetailsTaxExempt	String	True		The customer's tax exempt status after a completed Checkout Session.
CustomerDetailsTaxIds	String	True		The customer's tax Ids after a completed Checkout Session.
CustomerEmail	String	False		The email of the customer.
ExpiresAt	Datetime	False		The timestamp at which the Checkout Session expires.
InvoiceId	String	True		The Id of the invoice created by the Checkout Session.
InvoiceCreation	String	True		Details on the state of invoice creation for the Checkout Session.
Livemode	Boolean	True		true if the object is in live mode andfalse if in test mode.
Locale	String	False		The IETF language tag of the locale Checkout is displayed in.
Metadata	String	False		The set of key/value pairs that you can attach to a value list object.
Mode	String	False		The mode of the Checkout Session.
Object	String	True		String representing the object's type. Objects of the same type share the same value.
PaymentIntentId	String	True		The Id of the PaymentIntent for Checkout Sessions in payment mode.
PaymentLinkId	String	True		The Id of the Payment Link that created this Session.
PaymentMethodCollection	String	False		Configures whether a Checkout Session should collect a payment method.
PaymentMethodTypes	String	False		A list of the types of payment methods (e.g. card) this Checkout Session is allowed to accept.
PaymentStatus	String	True		The payment status of the Checkout Session, one of paid, unpaid, or no_payment_required. 使用できる値は次のとおりです。no_payment_required, paid, unpaid
PhoneNumberCollectionEnabled	Boolean	False		Indicates whether phone number collection is enabled for the session.
RecoveredFrom	String	True		The Id of the original expired Checkout Session that triggered the recovery flow.
Redaction	String	True		Redactions for the session.
SetupIntent	String	False		The Id of the SetupIntent for Checkout Sessions in setup mode.
ShippingAddressCollectionAllowedCountries	String	False		When set, provides configuration for Checkout to collect a shipping address from a customer.
ShippingCost	String	True		The details of the customer cost of shipping, including the customer-chosen ShippingRate.
ShippingDetails	String	True		Shipping information for this Checkout Session.
ShippingOptions	String	True		The shipping rate options applied to this Session.
Status	String	True		The status of the Checkout Session, one of open, complete, or expired.
SubmitType	String	False		Describes the type of transaction being performed by Checkout in order to customize relevant text on the page, such as the submit button. submit_type can only be specified on Checkout Sessions in payment mode, but not Checkout Sessions in subscription or setup mode.
SubscriptionId	String	True		The Id of the subscription for Checkout Sessions in subscription mode.
SuccessUrl	String	False		The URL the customer is directed to after the payment or subscription creation is successful.
TotalDetails	String	True		Tax and discount details for the computed total amount.
UiMode	String	False		The UI mode of the Session. Can be hosted (default) or embedded. 使用できる値は次のとおりです。hosted, embedded
Url	String	True		The URL to the Checkout Session.
ReturnUrl	String	False		The URL to redirect your customer back to after they authenticate or cancel their payment on the payment method’s app or site. This parameter is required if ui_mode is embedded and redirect-based payment methods are enabled on the session.
LineItemsAggregate	String	False		The line items purchased by the customer.

Pseudo-Columns

SELECT ステートメントのWHERE 句では、疑似カラムフィールドを使用して、データソースから返されるタプルを詳細に制御することができます。


Name	Type	Description
AccountId	String	The Id of the connected account to get checkout session for.

Coupons

Get and delete the available discount of a Subscription.

Table Specific Information

Select

Server-Side Query Support

The Sync App uses the Stripe API to filter the results by the following columns and operators while the rest of the filter is executed client-side within the Sync App.

Id support the following operator =.
CreatedAt support the following operators <,>>=,<=,=.
AccountId support the following operator =.

The provider supports the use of all columns as criteria in the WHERE clause of SELECT statements, as long as SupportEnhancedSQL is set to True. If SupportEnhancedSQL property is set to False, you still can retrieve:

-Coupons list:

SELECT * FROM Coupons

-A specific Coupon by specifying its Id:

SELECT * FROM Coupons WHERE Id = 'nReumrk6'

Insert

To create a new coupon, at least Duration is required. If Duration is set to 'repeating', DurationInMonths is also required:

INSERT INTO Coupons (Id, Duration, DurationInMonths, PercentOff, Currency) VALUES ('12345678', 'repeating', '12', '50', 'ALL')

Update

To modify a credit note, specify the credit note Id and run an Update statement.

Update Coupons set name = 'non-repeating' where Id = 'mIKfjEfL'

Delete

To delete a Coupon, specify the Id field:

DELETE FROM Coupons WHERE Id = 'nReumrk6'

Columns


Name	Type	ReadOnly	References	Description
Id [KEY]	String	False		The Id of the coupon.
CreatedAt	Datetime	True		The creation date.
Currency	String	False		If amount_off has been set, the three-letter ISO code for the currency of the amount to take off.
Duration	String	False		Describes how long a customer who applies this coupon will get the discount. One of forever, once, and repeating.
DurationInMonths	Integer	False		If duration is repeating, the number of months the coupon applies. Null if coupon duration is forever or once.
AmountOff	Integer	False		Amount (in the currency specified) that is taken off the subtotal of any invoices for this customer.
PercentOff	Decimal	False		Percent that will be taken off the subtotal of any invoices for this customer for the duration of the coupon. For example, a coupon with a percent_off of 50 will make a $100 invoice $50 instead.
Valid	Boolean	True		Taking account of the above properties, whether this coupon can still be applied to a customer.
MaxRedemptions	Integer	False		Maximum number of times this coupon can be redeemed, in total, before it is no longer valid.
RedeemBy	Datetime	False		Date after which the coupon can no longer be redeemed.
MetadataAggregate	String	False		The set of key/value pairs that you can attach to a coupon object.
TimesRedeemed	Integer	True		Number of times this coupon has been applied to a customer.
Object	String	True		String representing the object's type. Objects of the same type share the same value.
AppliesTo	String	False		Contains information about what this coupon applies to. This field is not included by default. To include it in the response, expand the applies_to field.
Livemode	Boolean	True		Has the value true if the object exists in live mode or the value false if the object exists in test mode.
Name	String	False		Name of the coupon displayed to customers on, for instance, invoices or receipts.

Pseudo-Columns

SELECT ステートメントのWHERE 句では、疑似カラムフィールドを使用して、データソースから返されるタプルを詳細に制御することができます。


Name	Type	Description
CurrencyOptions	String	Coupons defined in each available currency option (only supported if amount_off is passed). Each key must be a three-letter ISO currency code and a supported currency.
AccountId	String	The Id of the connected account to get coupons for.

CreditNotes

Creates, updates, and queries a credit note to adjust an invoice's amount after the invoice is finalized.

Table Specific Information

Select

The Sync App uses the Stripe API to filter the results by the following columns and operators:

Id supports the following operator: =.
CustomerId supports the following operator: =.
InvoiceId supports the following operator: =.
AccountId supports the following operator: =.

The rest of the filter is executed client-side within the Sync App.

The provider supports the use of all columns as criteria in the WHERE clause of SELECT statements, as long as SupportEnhancedSQL is set to True. If SupportEnhancedSQL property is set to False, you still can retrieve the PaymentMethods:

SELECT * FROM CreditNotes
SELECT * FROM CreditNotes WHERE Id = '123124'
SELECT * FROM CreditNotes WHERE CustomerId = 'cus_N8rO0qc7j1SJJ9'
SELECT * FROM CreditNotes WHERE InvoiceId = 'in_23341xds'

Insert

To create a new credit note, InvoiceId is required:

INSERT INTO CreditNotes (InvoiceId) VALUES ('in_23341xds')
INSERT INTO CreditNotes (InvoiceId, Amount, CustomerId, Reason) VALUES ('in_23341xds', 1050, 'cus_N8rO0qc7j1SJJ9', 'duplicate')

Update

To modify a credit note, specify the credit note Id and run an Update statement.

UPDATE CreditNotes SET Amount = 1500 WHERE id='123124'

Columns


Name	Type	ReadOnly	References	Description
Id [KEY]	String	True		The Id of the credit note.
Amount	Integer	False		The integer amount in cents representing the total amount of the credit note, including tax.
AmountShipping	Integer	True		The sum of all the shipping amounts.
Created	Datetime	True		The time at which the object was created. Measured in seconds since the Unix epoch.
Currency	String	True		A three-letter ISO currency code, in lowercase.
CustomerId	String	True		The Id of customer.
CustomerBalanceTransaction	String	True		The customer balance transaction related to this credit note.
DiscountAmounts	String	True		The aggregate amounts calculated per discount for all line items.
EffectiveAt	Datetime	False		The date when this credit note goes into effect. This is the same as created unless overwritten.
InvoiceId	String	False		The Id of invoice.
Lines	String	False		Line items that make up the credit note.
Livemode	Boolean	True		true if the object is in live mode andfalse if in test mode.
Memo	String	False		Customer-facing text that appears on the credit note PDF.
Metadata	String	False		The set of key/value pairs that you can attach to a value list object.
Number	String	True		A unique number that identifies this particular credit note and appears on the PDF of the credit note and its associated invoice.
OutOfBandAmount	Integer	False		Amount that was credited outside of Stripe.
Pdf	String	True		The link to download the PDF of the credit note.
Reason	String	False		The reason for issuing this credit note, one of duplicate, fraudulent, order_change, or product_unsatisfactory. 使用できる値は次のとおりです。duplicate, fraudulent, order_change, product_unsatisfactory
Refund	String	False		The refund related to this credit note.
ShippingCost	String	False		The details of the cost of shipping
Status	String	True		The status of this credit note, one of issued or void.
Subtotal	Integer	True		The integer amount in cents representing the amount of the credit note, excluding exclusive tax and invoice level discounts.
SubtotalExcludingTax	Integer	True		The integer amount in cents representing the amount of the credit note, excluding all tax and invoice level discounts.
TaxAmounts	String	True		The aggregate amounts calculated per tax rate for all line items.
Total	Integer	True		The integer amount in cents representing the total amount of the credit note, including tax and all discount.
TotalExcludingTax	Integer	True		The integer amount in cents representing the total amount of the credit note, excluding tax, but including discounts.
Type	String	True		The type of this credit note, either pre_payment or post_payment.
VoidedAt	Datetime	True		The time at which the credit note was voided.

Pseudo-Columns

SELECT ステートメントのWHERE 句では、疑似カラムフィールドを使用して、データソースから返されるタプルを詳細に制御することができます。


Name	Type	Description
CreditAmount	Integer	The integer amount in cents representing the amount to credit the customer’s balance, which will be automatically applied to their next invoice.
RefundAmount	Integer	The integer amount in cents representing the amount to refund. If set, a refund will be created for the charge associated with the invoice.
AccountId	String	The Id of the connected account to get credit notes for.

Customers

Create, update, delete, and query the available Customers in Stripe.

Table Specific Information

Select

Server-Side Query Support

The Sync App uses the Stripe API to filter the results by the following columns and operators while the rest of the filter is executed client-side within the Sync App.

Id support the following operators: =.
Created support the following operators: <,>>=,<,<=,=.
Email support the following operators: =.
MetadataAggregate support the following operators: =.
Name support the following operators: =,!=,Contains.
Phone support the following operators: =,!=,Contains.
TestClock support the following operators: =.
AccountId support the following operators: =.

The provider supports the use of all columns as criteria in the WHERE clause of SELECT statements, as long as SupportEnhancedSQL is set to True. If SupportEnhancedSQL property is set to False, you still can retrieve:

-a Customer by specifying its Id:

SELECT * FROM Customers WHERE Id = 'cus_AA9uRhvt0xicaf'

-Customers created after a specific date (Created may be used with the >, >=, <, <=, or = conditions and may be used twice to specify a range):

SELECT * FROM Customers WHERE Created > '2016-01-03'

Insert

To create a new customer, at least Email or Description is required:

INSERT INTO Customers (Email, Description) VALUES ('[email protected]', 'New account')

To apply a discount to a new customer, set the DiscountId field to the CouponId, which is discounted:

INSERT INTO Customers (Email, Description, DiscountId) VALUES ('[email protected]', 'New account', 'cup_123456')

Update

To modify a Customer, specify the Customer Id and run an Update statement.

UPDATE Customers SET Description = 'An updated account' WHERE Id = 'cus_85PEPye2wfN4u4'

Delete

To Delete a Customer, specify the Customer Id and run an Delete statement.

DELETE FROM CUSTOMERS WHERE Id = 'cus_8AcjiGnVMz2sMr'

Columns


Name	Type	ReadOnly	References	Description
Id [KEY]	String	True		The Id of the customer.
AddressAggregate	String	False		The customer's address.
Balance	Integer	False		The current balance of the customer.
Created	Datetime	True		The time of creation.
Currency	String	True		The currency the customer can be charged in for recurring billing purposes.
DefaultSource	String	False		The Id of the default source attached to this customer.
Delinquent	Boolean	True		Whether or not the latest charge for the latest invoice of the customer has failed.
CouponId	String	False		The Id of the discount coupon.
Description	String	False		The customer description.The description field on customer endpoints has a maximum character length limit of 350.
Email	String	False		The email of the customer.
Livemode	Boolean	True		Whether the customer is in live mode.
MetadataAggregate	String	False		The set of key/value pairs that you can attach to a customer object.
Name	String	False		The customer's full name or business name.
Phone	String	False		The customer's phone number.
ShippingAggregate	String	True		The shipping information associated with the customer.
TaxExempt	String	False		Describes the customer's tax exemption status. One of none, exempt, or reverse. When set to reverse, invoice and receipt PDFs include the text 'Reverse charge'.
InvoicePrefix	String	False		The prefix for the customer used to generate unique invoice numbers.
NextInvoiceSequence	Integer	False		The suffix of the customer's next invoice number, e.g., 0001.
TestClock	String	False		ID of the test clock this customer belongs to.
PreferredLocales	String	False		The customer's preferred locales (languages), ordered by preference.
InvoiceSettingsCustomFieldsAggregate	String	False		Default custom fields to be displayed on invoices for this customer.
InvoiceSettingsDefaultPaymentMethod	String	False		ID of a payment method that's attached to the customer, to be used as the customer's default payment method for subscriptions and invoices.
InvoiceSettingsFooter	String	False		Default footer to be displayed on invoices for this customer.
TaxIdsAggregate	String	False		The customer's tax IDs.
DiscountId	String	True		The Id of the discount.
DiscountCheckoutSession	String	True		The Checkout session that this coupon is applied to, if it is applied to a particular session in payment mode. Will not be present for subscription mode.
DiscountCustomer	String	True		The ID of the customer associated with this discount.
DiscountStart	Datetime	True		If the subscription has a trial, the beginning of that trial.
DiscountEnd	Datetime	True		If the subscription has a trial, the end of that trial.
DiscountInvoice	String	True		The invoice that the discount's coupon was applied to, if it was applied directly to a particular invoice.
DiscountInvoiceItem	String	True		The invoice line item id that the discount's coupon was applied to if it was applied directly to a invoice line item.
DiscountPromotionCode	String	True		The promotion code applied to create this discount.The promotion code applied to create this discount.
DiscountSubscription	String	True		The subscription that this coupon is applied to, if it is applied to a particular subscription.
DiscountCouponCreatedAt	Datetime	True		The creation date.
DiscountCouponCurrency	String	True		If amount_off has been set, the three-letter ISO code for the currency of the amount to take off.
DiscountCouponName	String	True		Name of the coupon displayed to customers on, for instance, invoices or receipts.
DiscountCouponDuration	String	True		One of forever, once, and repeating. Describes how long a customer who applies this coupon will get the discount.
DiscountCouponDurationInMonths	Integer	True		the number of months the coupon applies.
DiscountCouponAmountOff	Integer	True		Amount (in the currency specified) that is taken off the subtotal of any invoices for this customer.
DiscountCouponPercentOff	Integer	True		Percent that will be taken off the subtotal of any invoices for this customer for the duration of the coupon. For example, a coupon with a percent_off of 50 will make a $100 invoice $50 instead.
DiscountCouponValid	Boolean	True		Taking account of the above properties, whether this coupon can still be applied to a customer.
DiscountCouponMaxRedemptions	Integer	True		Maximum number of times this coupon can be redeemed, in total, before it is no longer valid.
DiscountCouponRedeemBy	Datetime	True		Date after which the coupon can no longer be redeemed.
DiscountCouponTimesRedeemed	Integer	True		Number of times this coupon has been applied to a customer.
DiscountCouponObject	String	True		String representing the object's type. Objects of the same type share the same value.
DiscountCouponLiveMode	Boolean	True		Has the value true if the object exists in live mode or the value false if the object exists in test mode.
DiscountCouponMetadataAggregate	String	True		Set of key-value pairs that you can attach to an object.
SourcesAggregate	String	True		The customer�s payment sources.
TaxAutomaticTax	String	True		Surfaces if automatic tax computation is possible given the current customer location information. 使用できる値は次のとおりです。supported, not_collecting, unrecognized_location, failed
TaxIPAddress	String	False		A recent IP address of the customer used for tax reporting and tax location inference.
TaxCountry	String	True		The customer's country as identified by Stripe Tax.
TaxState	String	True		The customer's state, county, province, or region as identified by Stripe Tax.
TaxSource	String	True		The data source used to infer the customer�s location

Pseudo-Columns

SELECT ステートメントのWHERE 句では、疑似カラムフィールドを使用して、データソースから返されるタプルを詳細に制御することができます。


Name	Type	Description
AccountId	String	The Id of the connected account to get customers for.
TaxValidateLocation	String	A flag that indicates when Stripe should validate the customer tax location. Defaults to deferred. Use only for INSERT and UPDATE. 使用できる値は次のとおりです。deferred, immediately

Disputes

Query the available Disputes in Stripe.

Table Specific Information

Select

Server-Side Query Support

The Sync App uses the Stripe API to filter the results by the following columns and operators while the rest of the filter is executed client-side within the Sync App.

Id support the following operators: =.
Created support the following operators: <,>>=,<,<=,=.
AccountId support the following operators: =.
PAymentIntent support the following operators: =.
Charge support the following operators: =.

The provider supports the use of all columns as criteria in the WHERE clause of SELECT statements, as long as the SupportEnhancedSQL property is set to True. If the SupportEnhancedSQL property is set to False, you still can retrieve:

-a Dispute by specifying its Id:

SELECT * FROM Disputes WHERE Id = 'dp_12345678'

-Disputes opened after a specific date (Created may be used with the >, >=, <, <=, or = conditions and may be used twice to specify a range):

SELECT * FROM Disputes WHERE Created > '2016-01-03'

Insert

INSERT is not supported.

Update

To modify a Dispute, specify the Dispute Id and run an UPDATE statement.

UPDATE Disputes SET EvidenceCustomerName = 'Test User' WHERE Id = 'dp_12345678'

Delete

Delete is not supported.

Columns


Name	Type	ReadOnly	References	Description
Id [KEY]	String	True		The Id of the dispute.
Currency	String	True		Three-letter ISO currency code representing the currency of the amount that was disputed.
EvidenceAccessActivityLog	String	False		Any server or activity logs showing proof that the customer accessed or downloaded the purchased digital product.
EvidenceBillingAddress	String	False		The billing address provided by the customer.
EvidenceCancellationPolicy	String	False		Your subscription cancellation policy, as shown to the customer.
EvidenceCancellationPolicyDisclosure	String	False		An explanation of how and when the customer was shown your refund policy prior to purchase.
EvidenceCancellationRebuttal	String	False		A justification for why the customer's subscription was not canceled.
EvidenceCustomerCommunication	String	False		The (ID of a file upload) Any communication with the customer that you feel is relevant to your case (for example emails proving that they received the product or service, or demonstrating their use of or satisfaction with the product or service).
EvidenceCustomerEmailAddress	String	False		The email address of the customer.
EvidenceCustomerName	String	False		The name of the customer.
EvidenceCustomerPurchaseIp	String	False		The IP address that the customer used when making the purchase.
EvidenceCustomerSignature	String	False		The (ID of a file upload) A relevant document or contract showing the customer's signature.
EvidenceDuplicateChargeDocumentation	String	False		The (ID of a file upload) Documentation for the prior charge that can uniquely identify the charge, such as a receipt, shipping label, work order, etc.
EvidenceDuplicateChargeExplanation	String	False		The explanation of the difference between the disputed charge and the prior charge that appears to be a duplicate.
EvidenceDuplicateChargeId	String	False		The Stripe ID for the prior charge which appears to be a duplicate of the disputed charge.
EvidenceProductDescription	String	False		The description of the product or service which was sold.
EvidenceReceipt	String	False		The (ID of a file upload) Any receipt or message sent to the customer notifying them of the charge.
EvidenceRefundPolicy	String	False		The (ID of a file upload) Your refund policy, as shown to the customer.
EvidenceRefundPolicyDisclosure	String	False		The documentation demonstrating that the customer was shown your refund policy prior to purchase.
EvidenceRefundRefusalExplanation	String	False		The justification for why the customer is not entitled to a refund.
EvidenceServiceDate	String	False		The date on which the customer received or began receiving the purchased service, in a clear human-readable format.
EvidenceServiceDocumentation	String	False		The (ID of a file upload) Documentation showing proof that a service was provided to the customer. This could include a copy of a signed contract, work order, or other form of written agreement.
EvidenceShippingAddress	String	False		The address to which a physical product was shipped. You should try to include as much complete address information as possible.
EvidenceShippingCarrier	String	False		The delivery service that shipped a physical product, such as Fedex, UPS, USPS, etc. If multiple carriers were used for this purchase, please separate them with commas.
EvidenceShippingDate	String	False		The date on which a physical product began its route to the shipping address, in a clear human-readable format.
EvidenceShippingDocumentation	String	False		The (ID of a file upload) Documentation showing proof that a product was shipped to the customer at the same address the customer provided to you. This could include a copy of the shipment receipt, shipping label, etc, and should show the full shipping address of the customer, if possible.
EvidenceShippingTrackingNumber	String	False		The tracking number for a physical product, obtained from the delivery service. If multiple tracking numbers were generated for this purchase, please separate them with commas.
EvidenceUncategorizedFile	String	False		The (ID of a file upload) Any additional evidence or statements.
EvidenceUncategorizedText	String	False		Any additional evidence or statements.
EvidenceDetailsDueBy	Datetime	True		Date by which evidence must be submitted in order to successfully challenge dispute.
EvidenceDetailsHasEvidence	Boolean	True		Whether or not evidence has been saved for this dispute.
EvidenceDetailsPastDue	Boolean	True		Whether or not the last evidence submission was submitted past.
EvidenceDetailsSubmissionCount	Integer	True		The number of times the evidence has been submitted.
Amount	Integer	True		The disputed amount.
BalanceTransactionsAggregate	String	True		List of zero, one, or two balance transactions that show funds withdrawn and reinstated to your Stripe account as a result of this dispute.
Charge	String	True		The Id of the charge that was disputed.
Created	Datetime	True		The Date dispute was opened.
IsChargeRefundable	Boolean	True		If true, it is still possible to refund the disputed payment.
Livemode	Boolean	True		Tells if the dispute is in livemode.
Reason	String	True		The reason given by cardholder for dispute.
Status	String	True		The current status of dispute.
MetadataAggregate	String	False		Set of key-value pairs that you can attach to an object. This can be useful for storing additional information about the object in a structured format.
Transaction	String	True		The transaction being disputed.
Object	String	True		String representing the object's type. Objects of the same type share the same value.
PaymentIntent	String	True		ID of the PaymentIntent that was disputed.
PaymentMethodDetails	String	True		Additional dispute information specific to the payment method type.

Pseudo-Columns

SELECT ステートメントのWHERE 句では、疑似カラムフィールドを使用して、データソースから返されるタプルを詳細に制御することができます。


Name	Type	Description
AccountId	String	The Id of the connected account to get disputes for.
Submit	Boolean	Whether to immediately submit evidence to the bank. If false, evidence is staged on the dispute. Staged evidence is visible in the API and Dashboard, and can be submitted to the bank by making another request with this attribute set to true

InvoiceItems

Create, update, delete, and query the available invoices items in Stripe.

Table Specific Information

Select

Server-Side Query Support

The Sync App uses the Stripe API to filter the results by the following columns and operators while the rest of the filter is executed client-side within the Sync App.

Id, InvoiceId, Customer, and AccountId support the following operator: =.
Date support the following operators: <,>>=,<,<=, =.

The provider supports the use of all columns as criteria in the WHERE clause of SELECT statements, as long as SupportEnhancedSQL is set to True. If SupportEnhancedSQL property is set to False, you still can retrieve:

All InvoiceItems:

SELECT * FROM InvoiceItems

An InvoiceItem by specifying its Id:

SELECT * FROM InvoiceItems WHERE Id = 'or_12345678'

InvoiceItems for a given Customer:

SELECT * FROM InvoiceItems WHERE Customer = 'cus_12345678'

InvoiceItems created after a specific date (Date may be used with the >, >=, <, <=, or = conditions and may be used twice to specify a range):

SELECT * FROM InvoiceItems WHERE Date='2018-11-16 10:59:00.0'

Insert

To create a new InvoiceItem, the Customer, Currency, and Amount fields are required:

INSERT INTO InvoiceItems (Customer, Currency, Amount) VALUES ('cus_NBs3z63zmfCJy1','USD','225')

INSERT can be executed by specifying the DiscountsAggregate column. The columns that are not read-only can be inserted (optional). DiscountsAggregate is an aggregate column.

To insert using this column as Temp table:

INSERT INTO InvoiceItemDiscounts#TEMP (Coupon) VALUES ('Pqx2fHKt');

INSERT INTO InvoiceItems (Customer, Amount, Currency, DiscountsAggregate) VALUES ('cus_O20ZOZfrjjJeGj', 25000, 'USD', 'InvoiceItemDiscounts#TEMP');

To insert using this column as json:

INSERT INTO InvoiceItems (Customer, currency, MetadataAggregate,PeriodEnd, PeriodStart,DiscountsAggregate,PriceDataProduct,PriceDataCurrency) Values ('cus_PARXAI77xUsWw1','USD','[{\"key\":\"test2\",\"type\":\"text\",\"test\":\"value\"}]','2023-11-03 14:00:09.000000','2023-11-03 14:00:08.000000','[{\"discount\":\"text\"},{\"discount\":\"value\"}]','product1','usd')

INSERT can be executed by specifying the TaxRatesAggregate column. The columns that are not read-only can be inserted (optional).

INSERT INTO InvoiceItems (Customer, Currency, Amount, TaxRatesAggregate) VALUES ('cus_9s6XKzkNRiz8i3','USD',125614,'[\"txr_1OL7oy2eZvKYlo2CLylDtkiI\",\"txr_1OL7oo2eZvKYlo2CHliiOEZT\"]');

Update

To update an InvoiceItem, specify an Id.

UPDATE InvoiceItems SET PeriodStart='2023-11-03 14:00:06.000000', PeriodEnd='2023-11-03 14:00:08.000000' WHERE Id='ii_1OIS6s2eZvKYlo2COIxLnMms'

Delete

To delete an InvoiceItem, specify an Id.

Delete from InvoiceItems where id='ii_1OP2II2eZvKYlo2CLc0nHFnR'

Columns


Name	Type	ReadOnly	References	Description
Id [KEY]	String	True		The Id of the invoice item.
InvoiceId	String	False	Invoices.Id	The Id of the invoice.
Amount	Int	False		The amount, in cents.
Customer	String	False	Customers.Id	The ID of the customer who will be billed when this invoice item is billed.
Currency	String	False		Three-letter ISO currency code, in lowercase. Must be a supported currency.
Date	Datetime	False		Time at which the object was created.
Description	String	False		An arbitrary string attached to the object. Often useful for displaying to users. The description field on invoice line items has a maximum character length limit of 500.
Discountable	Boolean	False		If true, discounts will apply to this line item. Always false for prorations.
LiveMode	Boolean	False		Has the value true if the object exists in live mode or the value false if the object exists in test mode.
PeriodStart	Datetime	False		The start of the period.
PeriodEnd	Datetime	False		The end of the period which must be greater than or equal to the start.
PlanId	String	False		Unique identifier for the plan.
PlanAggregate	String	True		The plan of the subscription, if the line item is a subscription or a proration.
PriceId	String	False		Unique identifier for the price.
PriceAggregate	String	True		The price of the invoice item.
Proration	Boolean	True		Whether this is a proration.
Quantity	Int	False		The quantity of the subscription, if the line item is a subscription or a proration.
Subscription	String	False		The Id of the subscription the item pertains to.
SubscriptionItems	String	False		The subscription item that this invoice item has been created for, if any.
TestClock	String	False		ID of the test clock this invoice item belongs to.
UnitAmount	Integer	False		Unit amount (in the currency specified) of the invoice item.
UnitAmountDecimal	Decimal	False		Decimal value of Unit amount (in the currency specified) of the invoice item.
MetadataAggregate	String	False		The metadata object.
DiscountsAggregate	String	False		The discounts which apply to the invoice item.
TaxRatesAggregate	String	False		The tax rates which apply to the invoice item. When set, the default_tax_rates on the invoice do not apply to this invoice item.

Pseudo-Columns

SELECT ステートメントのWHERE 句では、疑似カラムフィールドを使用して、データソースから返されるタプルを詳細に制御することができます。


Name	Type	Description
PriceDataProduct	String	The ID of the product that this price will belong to. This is a psuedo column to support insert operation.
PriceDataCurrency	String	Three-letter ISO currency code, in lowercase. Must be a supported currency. This is a psuedo column to support insert operation.
PriceDataTaxBehavior	String	Only required if a default tax behavior was not provided in the Stripe Tax settings. Specifies whether the price is considered inclusive of taxes or exclusive of taxes. One of inclusive, exclusive, or unspecified. Once specified as either inclusive or exclusive, it cannot be changed. This is a psuedo column to support insert operation.
PriceDataUnitAmount	Int	A positive integer in cents (or 0 for a free price) representing how much to charge. This is a psuedo column to support insert operation.
PriceDataUnitAmountDecimal	String	Same as unit_amount, but accepts a decimal value in cents with at most 12 decimal places. Only one of unit_amount and unit_amount_decimal can be set. This is a psuedo column to support insert operation.
TaxBehavior	String	Only required if a default tax behavior was not provided in the Stripe Tax settings. Specifies whether the price is considered inclusive of taxes or exclusive of taxes. One of inclusive, exclusive, or unspecified. Once specified as either inclusive or exclusive, it cannot be changed. This is a psuedo column to support insert operation.
TaxCode	String	A tax code ID.
AccountId	String	The Id of the connected account to get invoice line items for.

Invoices

Create, update, delete, and query the available Invoices in Stripe.

Table Specific Information

Select

Server-Side Query Support

The Sync App uses the Stripe API to filter the results by the following columns and operators while the rest of the filter is executed client-side within the Sync App.

Id, CustomerId, CollectionMethod, Upcoming, AutoAdvance, Currency, Metadata, Number, ReceiptNumber, Status and Subscription support the following operator: =.
Created, and Total support the following operators: <,>>=,<,<=, =.

The provider supports the use of all columns as criteria in the WHERE clause of SELECT statements, as long as SupportEnhancedSQL is set to True. If SupportEnhancedSQL property is set to False, you still can retrieve:

All Invoices:

SELECT * FROM Invoices

An Invoice by specifying its Id:

SELECT * FROM Invoices WHERE Id = 'or_12345678'

An Invoice created after a specific date (Created may be used with the >, >=, <, <=, or = conditions and may be used twice to specify a range):

SELECT * FROM Invoices WHERE Created='2023-07-21 19:00:27.0'

Invoices for a given Customer:

SELECT * FROM Invoices WHERE CustomerId = 'cus_12345678'

Invoices by AutoAdvance:

SELECT * FROM Invoices WHERE AutoAdvance = True

Invoices by Subscription:

SELECT * FROM Invoices WHERE Subscription = 'sub_12345678'

Insert

To Create a new Invoice, the CustomerId, CollectionMethod, DaysUntilDue and PendingInvoiceItemsBehavior fields are required. CustomFieldsAggregate is an aggregate column.

To insert using this column:

INSERT INTO Invoices (CustomerId, CollectionMethod, DaysUntilDue, PendingInvoiceItemsBehavior, CustomFieldsAggregate) VALUES ('cus_MDxevmmMzKidZc', 'send_invoice', 30, 'exclude', '{\"name\":\"cf_test\",\"value\":\"mycfvalue\"}')

INSERT can be executed by specifying the AccountTaxRates column. The columns that are not read-only can be inserted (optional). AccountTaxRates expects TaxRateIds as an array of strings.

INSERT INTO Invoices(CustomerID,Subscription,AccountTaxRates) VALUES ('cus_9s6XKzkNRiz8i3','sub_1OHM2S2eZvKYlo2C8dDGfEdN','[\"txr_1OL7oy2eZvKYlo2CLylDtkiI\",\"txr_1OL7oo2eZvKYlo2CHliiOEZT\"]');

INSERT can be executed by specifying the Discounts column. The columns that are not read-only can be inserted (optional). Discounts is an aggregate column.

To insert using this column:

INSERT INTO InvoiceDiscounts#TEMP (Coupon) VALUES ('dsocsdc')

INSERT INTO Invoices (CustomerId, Discounts) VALUES ('cus_Oscvdvdw3fcd', 'InvoiceDiscounts#TEMP')

Update

To update an Invoice, specify an Id

Update Invoices set DefaultTaxRates = '[\"txr_1OL7oy2eZvKYlo2CLylDtkiI\",\"txr_1OL7oo2eZvKYlo2CHliiOEZT\"]' where id='in_1OMk0u2eZvKYlo2CGzA4kQ5A'

Delete

To delete an Invoice, specify the Id of the Invoice. Only draft invoices can be deleted.

DELETE FROM Invoices WHERE Id = 'in_1MOZcISC4snQ4WkOaa5LZmkj'

Columns


Name	Type	ReadOnly	References	Description
Id [KEY]	String	True		The Id of the invoice.
CustomerId	String	False	Customers.Id	The Id of the customer to be billed.
AccountCountry	String	True		The country of the business associated with this invoice, most often the business creating the invoice.
AccountName	String	True		The name of the business associated with this invoice, most often the business creating the invoice.
AccountTaxRates	String	False		The account tax IDs associated with the invoice.
AmountDue	Int	True		Final amount due at this time for this invoice.
AmountPaid	Int	True		The amount, in cents, that was paid.
AmountRemaining	Int	True		The amount remaining, in cents, that is due.
Application	String	True		ID of the Connect Application that created the invoice.
ApplicationFeeAmount	Int	False		The fee in cents that is applied to the invoice and transferred to the application owner's Stripe account when the invoice is paid.
AttemptCount	Int	True		Number of payment attempts made for this invoice, from the perspective of the payment retry schedule.
Attempted	Boolean	True		Whether an attempt has been made to pay the invoice.
AutomaticTaxEnabled	Boolean	False		Whether Stripe automatically computes tax on this invoice.
AutomaticTaxStatus	String	True		The status of the most recent automated tax calculation for this invoice.
BillingReason	String	True		Indicates the reason why the invoice was created.
CollectionMethod	String	False		Either charge_automatically, or send_invoice. When charging automatically, Stripe will attempt to pay this invoice using the default source attached to the customer. When sending an invoice, Stripe will email this invoice to the customer with payment instructions. 使用できる値は次のとおりです。charge_automatically, send_invoice
Charge	String	True		ID of the latest charge generated for this invoice, if any.
AutoAdvance	Boolean	False		Controls whether Stripe will perform automatic collection of the invoice. When false, the invoice's state will not automatically advance without an explicit action.
Currency	String	False		Three-letter ISO currency code, in lowercase.
Created	Datetime	True		Time at which the object was created. Measured in seconds since the Unix epoch.
Description	String	False		An arbitrary string attached to the object. Often useful for displaying to users. Referenced as 'memo' in the Dashboard.
DefaultPaymentMethod	String	False		ID of the default payment method for the invoice.
DefaultSource	String	False		ID of the default payment source for the invoice.
DefaultTaxRates	String	False		The tax rates applied to this invoice.
DiscountName	String	True		Name of the coupon.
DiscountAmount	String	True		Amount (in the currency specified) that is taken off the subtotal of any invoices for this customer.
CouponId	String	True		Id of the coupon.
Discounts	String	False		The discounts applied to the invoice.
DueDate	Datetime	False		The date on which payment for this invoice is due. This value is null for invoices where collection_method=charge_automatically.
EndingBalance	Int	True		Ending customer balance after the invoice is finalized.
InvoicePdf	String	True		The link to download the PDF for the invoice. If the invoice has not been finalized yet, this is null.
Footer	String	False		Footer displayed on the invoice.
LastFinalizationError	String	True		The error encountered during the previous attempt to finalize the invoice. This field is cleared when the invoice is successfully finalized.
HostedInvoiceUrl	String	True		The URL for the hosted invoice page, which allows customers to view and pay an invoice.
Livemode	Boolean	True		Has the value true if the object exists in live mode or the value false if the object exists in test mode.
MetadataAggregate	String	False		The set of key/value pairs that you can attach to a subscription object.
CustomFieldsAggregate	String	False		Custom Fields object.
NextPaymentAttempt	Datetime	True		The time at which payment will next be attempted.
Number	String	True		A unique, identifying string that appears on emails sent to the customer for this invoice.
OnBehalfOf	String	False		The account (if any) for which the funds of the invoice payment are intended.
Paid	Boolean	True		Whether payment was successfully collected for this invoice. An invoice can be paid (most commonly) with a charge or with credit from the customer's account balance.
PaidOutOfBand	Boolean	True		Returns true if the invoice was manually marked paid, returns false if the invoice hasn't been paid yet or was paid on Stripe.
PaymentIntent	String	True		The PaymentIntent associated with this invoice.
PaymentMethodOptions	String	True		Payment-method-specific configuration to provide to the invoice's PaymentIntent.
PaymentMethodTypes	String	False		The list of payment method types (e.g. card) to provide to the invoice's PaymentIntent.
PostPaymentCreditNotesAmount	Int	True		Total amount of all post-payment credit notes issued for this invoice.
PrePaymentCreditNotesAmount	Int	True		Total amount of all pre-payment credit notes issued for this invoice.
Quote	String	True		The quote Id this invoice was generated from.
PeriodEnd	Datetime	True		End of the usage period during which invoice items were added to this invoice.
PeriodStart	Datetime	True		Start of the usage period during which invoice items were added to this invoice.
ReceiptNumber	String	True		This is the transaction number that appears on email receipts sent for this invoice.
StartingBalance	Int	True		Starting customer balance before the invoice is finalized. If the invoice has not been finalized yet, this will be the current customer balance.
StatementDescriptor	String	False		If provided, each invoice created by this subscription will apply the tax rate, increasing the amount billed to the customer.
Status	String	True		The status of the invoice, one of draft, open, paid, uncollectible, or void. Instead of checking the forgiven field on an invoice, check for the uncollectible status. Instead of setting the forgiven field on an invoice, mark it as uncollectible. 使用できる値は次のとおりです。draft, open, paid, uncollectible, void
Subscription	String	False		The subscription that this invoice was prepared for, if any.
StatusTransitionsFinalizedAt	Datetime	True		The time that the invoice draft was finalized.
StatusTransitionsMarkedUncollectibleAt	Datetime	True		The time that the invoice was marked uncollectible.
StatusTransitionsPaidAt	Datetime	True		The time that the invoice was paid.
StatusTransitionsVoidedAt	Datetime	True		The time that the invoice was voided.
Subtotal	Int	True		Total of all subscriptions, invoice items, and prorations on the invoice before any invoice level discount or tax is applied.
Tax	Int	True		The amount of tax on this invoice. This is the sum of all the tax amounts on this invoice.
TestClock	String	True		ID of the test clock this invoice item belongs to.
Total	Int	True		Total after discounts and taxes.
TotalDiscountAmounts	String	True		The aggregate amounts calculated per discount across all line items.
TotalTaxAmounts	String	True		The aggregate amounts calculated per tax rate for all line items.
TransferDataAmount	Int	False		The amount that will be transferred to the destination account when the invoice is paid.
TransferDataDestination	String	False		The account where funds from the payment will be transferred to upon payment success.
WebhooksDeliveredAt	Datetime	True		Invoices are automatically paid or sent 1 hour after webhooks are delivered, or until all webhook delivery attempts have been exhausted.
AmountShipping	Int	True		This is the sum of all the shipping amounts.
ShippingDetails	String	True		Shipping details for the invoice. The Invoice PDF will use the shipping_details value if it is set, otherwise the PDF will render the shipping address from the customer.
ShippingCost	String	False		The details of the cost of shipping, including the ShippingRate applied on the invoice.
CustomerAddress	String	True		The customer's address.
CustomerEmail	String	True		The customer's email.
CustomerName	String	True		The customer's name.
CustomerPhone	String	True		The customer's phone number.
CustomerShipping	String	True		The customer's shipping information.
CustomerTaxExempt	String	True		The customer's tax exempt status.
CustomerTaxIds	String	True		The customer's tax Ids.
EffectiveAt	Datetime	False		The date when this invoice is in effect. When defined, this value replaces the system-generated 'Date of issue' printed on the invoice PDF and receipt.

Pseudo-Columns

SELECT ステートメントのWHERE 句では、疑似カラムフィールドを使用して、データソースから返されるタプルを詳細に制御することができます。


Name	Type	Description
PendingInvoiceItemsBehavior	String	For Insert this column is required 使用できる値は次のとおりです。exclude, include
Upcoming	Boolean	Determines if the select is for upcoming invoices.
DaysUntilDue	Int	The number of days from which the invoice is created until it is due. Only valid for invoices where billing=send_invoice.
Forgive	Boolean	Determines if invoice should be forgiven if source has insufficient funds to fully pay the invoice.
Source	String	A payment source to be charged. The source must be the ID of a source belonging to the customer associated with the invoice being paid.
AccountId	String	The Id of the connected account to get invoices for

PaymentIntent

A PaymentIntent guides you through the process of collecting a payment from your customer.

Columns


Name	Type	ReadOnly	References	Description
Id [KEY]	String	True		Unique identifier for the object.
Amount	Integer	False		Amount intended to be collected by this PaymentIntent.
AmountDetailsTip	String	True		Amount Details Tip
AmountCapturable	Integer	True		Amount that can be captured from this PaymentIntent.
AmountReceived	Integer	True		Amount that was collected by this PaymentIntent.
ApplicationFeeAmount	Integer	False		The amount of the application fee (if any) that will be requested to be applied to the payment and transferred to the application owners Stripe account.
AutomaticPaymentMethodsEnabled	Boolean	False		Automatically calculates compatible payment methods
AutomaticPaymentMethodsAllowRedirects	String	False		Controls whether this PaymentIntent will accept redirect-based payment methods.
CanceledAt	Datetime	True		Populated when status is canceled, this is the time at which the PaymentIntent was canceled.
CancellationReason	String	True		Reason for cancellation of this PaymentIntent, either user-provided (duplicate, fraudulent, requested_by_customer, or abandoned) or generated by Stripe internally (failed_invoice, void_invoice, or automatic).
CaptureMethod	String	False		Controls when the funds will be captured from the customers account.
ClientSecret	String	True		The client secret of this PaymentIntent. Used for client-side retrieval using a publishable key.
ConfirmationMethod	String	False		Possible enum values-automatic, manual
Created	Datetime	True		Time at which the object was created. Measured in seconds since the Unix epoch.
Currency	String	False		Three-letter ISO currency code, in lowercase.
Application	String	True		ID of the Connect application that created the PaymentIntent.
Customer	String	False		ID of the Customer this PaymentIntent belongs to, if one exists.
LatestCharge	String	True		The latest charge created by this payment intent.
PaymentMethod	String	False		ID of the payment method used in this PaymentIntent.
TransferDataDestination	String	False		The account (if any) the payment will be attributed to for tax reporting, and where funds from the payment will be transferred to upon payment success.
OnBehalfOf	String	False		The account (if any) for which the funds of the PaymentIntent are intended.
Invoice	String	True		ID of the invoice that created this PaymentIntent, if it exists.
Review	String	True		ID of the review associated with this PaymentIntent, if any.
Description	String	False		An arbitrary string attached to the object. Often useful for displaying to users.
LastPaymentErrorCharge	String	True		For card errors, the ID of the failed charge.
LastPaymentErrorCode	String	True		For some errors that could be handled programmatically, a short string indicating the error code reported.
LastPaymentErrorDeclineCode	String	True		For some errors that could be handled programmatically, a short string indicating the error code reported.
LastPaymentErrorDocURL	String	True		A URL to more information about the error code reported.
LastPaymentErrorMessage	String	True		A human-readable message providing more details about the error. For card errors, these messages can be shown to your users.
LastPaymentErrorParam	String	True		If the error is parameter-specific, the parameter related to the error. For example, you can use this to display a message near the correct form field.
LastPaymentErrorPaymentMethod	String	True		The PaymentMethod object for errors returned on a request involving a PaymentMethod.
LastPaymentErrorPaymentMethodType	String	True		If the error is specific to the type of payment method, the payment method type that had a problem. This field is only populated for invoice-related errors.
LastPaymentErrorType	String	True		The type of error returned. One of api_error, card_error, idempotency_error, or invalid_request_error
LiveMode	Boolean	True		Has the value true if the object exists in live mode or the value true if the object exists in test mode.
NextAction	String	True		If present, this property tells you what actions you need to take in order for your customer to fulfill a payment using the provided source.
Object	String	True		String representing the objects type. Objects of the same type share the same value.
PaymentMethodOptions	String	False		Payment-method-specific configuration for this PaymentIntent.
PaymentMethodTypes	String	False		The list of payment method types (e.g. card) that this PaymentIntent is allowed to use.
PaymentMethodConfigurationDetailsId	String	False		ID of the payment method configuration used.
PaymentMethodConfigurationDetailsParent	String	False		ID of the parent payment method configuration used.
ProcessingCard	String	True		If the PaymentIntents payment_method_types includes card, this hash contains the details on the processing state of the payment.
ProcessingType	String	True		Type of the payment method for which payment is in processing state, one of card.
ReceiptEmail	String	False		Set of key-value pairs that you can attach to an object.
MetadataAggregate	String	False		Set of key-value pairs that you can attach to an object. This can be useful for storing additional information about the object in a structured format.
SetupFutureUsage	String	False		Indicates that you intend to make future payments with this PaymentIntents payment method.
ShippingAddressCity	String	False		City, district, suburb, town, or village..
ShippingAddressCountry	String	False		Two-letter country code
ShippingAddressline1	String	False		Address line 1
ShippingAddressline2	String	False		Address line 2
ShippingAddressPostalCode	String	False		ZIP or postal code.
ShippingAddressState	String	False		State, county, province, or region.
ShippingCarrier	String	False		The delivery service that shipped a physical product, such as Fedex, UPS, USPS, etc.
ShippingName	String	False		Recipient name.
ShippingPhone	String	False		Recipient phone (including extension).
ShippingTrackingNumber	String	False		The tracking number for a physical product, obtained from the delivery service.
StatementDescriptor	String	False		For non-card charges, you can use this value as the complete description that appears on your customers statements.
StatementDescriptorSuffix	String	False		Provides information about a card payment that customers see on their statements.
Status	String	True		Status of this PaymentIntent, one of requires_payment_method, requires_confirmation, requires_action, processing, requires_capture, canceled, or succeeded. Read more about each PaymentIntent status.
TransferDataAmount	Integer	False		Amount intended to be collected by this PaymentIntent.
TransferGroup	String	False		A string that identifies the resulting payment as part of a group. See the PaymentIntents use case for connected accounts for details.

Pseudo-Columns

SELECT ステートメントのWHERE 句では、疑似カラムフィールドを使用して、データソースから返されるタプルを詳細に制御することができます。


Name	Type	Description
Confirm	Boolean	Set to true to attempt to confirm this PaymentIntent immediately. This column is supported in INSERT.
OffSession	Boolean	Set to true to indicate that the customer isn�t in your checkout flow during this payment attempt and can�t authenticate. This parameter can only be used with confirm=true. This column is supported in INSERT.
ErrorOnRequiresAction	Boolean	Set to true to fail the payment attempt if the PaymentIntent transitions into requires_action. Use this parameter for simpler integrations that don�t handle customer actions, such as saving cards without authentication. This parameter can only be used with confirm=true. This column is supported in INSERT.
Mandate	String	ID of the mandate that�s used for this payment. This parameter can only be used with confirm=true. This column is supported in INSERT.
MandateDataCustomerAcceptanceType	String	The type of customer acceptance information included with the Mandate. One of online or offline. This parameter can only be used with confirm=true. This column is supported in INSERT. 使用できる値は次のとおりです。online, offline
MandateDataCustomerAcceptanceAcceptedAt	Datetime	The time at which the customer accepted the Mandate. This parameter can only be used with confirm=true. This column is supported in INSERT.
MandateDataCustomerAcceptanceOffline	String	If this is a Mandate accepted offline, this hash contains details about the offline acceptance. This parameter can only be used with confirm=true. This column is supported in INSERT.
MandateDataCustomerAcceptanceOnlineIPAddress	String	The IP address from which the Mandate was accepted by the customer. This parameter can only be used with confirm=true. This column is supported in INSERT.
MandateDataCustomerAcceptanceOnlineUserAgent	String	The user agent of the browser from which the Mandate was accepted by the customer. This parameter can only be used with confirm=true. This column is supported in INSERT.
RadarOptionsSession	String	A Radar Session is a snapshot of the browser metadata and device details that help Radar make more accurate predictions on your payments. This column is supported in INSERT.
ReturnURL	String	The URL to redirect your customer back to after they authenticate or cancel their payment on the payment method�s app or site. This parameter can only be used with confirm=true. This column is supported in INSERT.

PaymentLinks

Create, update, and query the PaymentLinks in Stripe.

Table Specific Information

Select

The Sync App uses the Stripe API to filter the results by the following columns and operators while the rest of the filter is executed client-side within the Sync App.

Id supports the following operator: =.
Active supports the following operator: =.
AccountId supports the following operator: =.

The provider supports the use of all columns as criteria in the WHERE clause of SELECT statements, as long as SupportEnhancedSQL is set to True. If SupportEnhancedSQL property is set to False, you still can retrieve the PaymentLinks:

SELECT * FROM PaymentLinks WHERE Id = 'plink_1MHKmISC4snQ4WkOZ7vBfsGz'
SELECT * FROM PaymentLinks WHERE Active = 'true'
SELECT * FROM PaymentLinks WHERE AccountId = 'acct_1MGcyqSC4snQ4WkO'

Insert

INSERT can be executed by specifying the LineItems column. The columns that are not read-only can be inserted optionally. LineItems is an aggregate column. See the example below on how to insert using this column.

INSERT INTO PaymentLinkLineItems#TEMP (PriceId, Quantity) VALUES ('price_1MGhiLSC4snQ4WkOdVl8fSu2', 12)

INSERT INTO PaymentLinks (CustomFieldsAggregate,LineItems) VALUES ('{"key":"test1","type":"text"}', PaymentLinkLineItems#TEMP)

Insertion in PaymentLinks can also be done through a JSON String. See the example below:

INSERT INTO PaymentLinks (LineItems) VALUES ('{\"priceid\":\"price_1MGhiLSC4snQ4WkOdVl8fSu2\", \"quantity\":\"6\"}')

Insert can also be done by specifying MetadataAggregate with LineItems column. The columns that are not read-only can be inserted optionally.

INSERT INTO PaymentLinks(LineItems,MetadataAggregate,AfterCompletionHostedConfirmationCustomMessage,AfterCompletionType,AllowPromotionCodes)values ('[{\"price\":\"price_1OPPwR2eZvKYlo2CcNoquIuL\",\"Quantity\":\"245\"}]','[{\"order_id\":\"2415362\"}]','Hello','hosted_confirmation',true)

Update

To update a PaymentLinks, specify Id column.

INSERT INTO PaymentLinkLineItems#TEMP (Id, Quantity) VALUES ('li_N41aipJlFRxvEQ', 17)

UPDATE PaymentLinks SET LineItems = 'PaymentLinkLineItems#TEMP' WHERE Id = 'plink_1MJtXUSC4snQ4WkOhs6HJqLr'

You can also perform updates in PaymentLinks through a JSON String. See the example below:

UPDATE PaymentLinks SET LineItems = '{\"quantity\":\"69\", \"id\":\"li_N40wBnIKX6599N\"}', PaymentMethodTypes='[\"card\"]' WHERE Id = 'plink_1MJsuWSC4snQ4WkOXm8qlChy'

Columns


Name	Type	ReadOnly	References	Description
Id [KEY]	String	True		The Id of the Payment Link.
Active	Boolean	False		Only return payment links that are active or inactive.
AfterCompletionHostedConfirmationCustomMessage	String	False		A custom message to display to the customer after the purchase is complete.
AfterCompletionType	String	False		The specified behavior after the purchase is complete.
AfterCompletionRedirectURL	String	False		The specified behavior after the purchase is complete.
AllowPromotionCodes	Boolean	False		Enables user redeemable promotion codes.
ApplicationFeeAmount	Integer	False		The amount of the application fee (if any) that will be requested to be applied to the payment and transferred to the application owner Stripe account. Can only be applied when there are no line items with recurring prices.
ApplicationFeePercent	Decimal	False		A non-negative decimal between 0 and 100, with at most two decimal places. This represents the percentage of the subscription invoice subtotal that will be transferred to the application owner Stripe account.
AutomaticTaxEnabled	Boolean	False		If it is set to true, tax will be calculated automatically using the customer location.
BillingAddressCollection	String	False		Configuration for collecting the customers billing address.
ConsentCollectionPromotions	String	False		Configure fields to gather active consent from customers. If set to auto, enables the collection of customer consent for promotional communications. Possible values are auto and none.
ConsentCollectionTermsOfService	String	False		Configure fields to gather active consent from customers. If set to required, it requires customers to check a terms of service checkbox before being able to pay. Possible values are required and none.
ConsentCollectionPaymentMethodResuseAgreementPosition	String	False		Determines the position and visibility of the payment method reuse agreement in the UI. When set to auto, Stripe’s defaults will be used. When set to hidden, the payment method reuse agreement text will always be hidden in the UI.
Currency	String	False		Three-letter ISO currency code, in lowercase.
CustomTextShippingAddressMessage	String	False		Custom text that should be displayed alongside shipping address collection.
CustomTextSubmitMessage	String	False		Custom text that should be displayed alongside the payment confirmation button.
CustomTextAfterSubmitMessage	String	False		Custom text that should be displayed after the payment confirmation button.
CustomTextTermsOfServiceAcceptanceMessage	String	False		Custom text that should be displayed in place of the default terms of service agreement text.
CustomerCreation	String	False		Configures whether checkout sessions created by this payment link create a Customer. Possible values are if_required and always.
Livemode	Boolean	True		Has the value true if the object exists in live mode or the value false if the object exists in test mode.
Object	String	True		String representing the object type.
OnBehalfOf	String	False		The account on behalf of which to charge.
MetadataAggregate	String	False		Set of key-value pairs that you can attach to an object. This can be useful for storing additional information about the object in a structured format.
PaymentIntentDataCaptureMethod	String	False		Controls when the funds will be captured from the customer account. Possible values are automatic and manual.
PaymentIntentDataSetupFutureUsage	String	False		Indicates that you intend to make future payments with the payment method collected by this Checkout Session. Possible values are on_session and off_session.
PaymentMethodCollection	String	False		Configuration for collecting a payment method during checkout. Possible values are always and if_required.
PaymentMethodTypes	String	False		The list of payment method types that customers can use. Possible values are card, affirm, promptpay, bacs_debit, bancontact, blik, boleto, eps, fpx, giropay, grabpay, ideal, klarna, konbini, oxxo, p24, paynow, pix, afterpay_clearpay, alipay, au_becs_debit, sepa_debit, sofort, us_bank_account, wechat_pay.
PhoneNumberberCollectionEnabled	Boolean	False		If true, a phone number will be collected during checkout.
ShippingAddressCollectionAllowedCountries	String	False		An array of two-letter ISO country codes representing which countries Checkout should provide as options for shipping locations.
ShippingOptions	String	False	ShippingRates.Id	The shipping rate options applied to the session.
SubmitType	String	False		Indicates the type of transaction being performed which customizes relevant text on the page, such as the submit button.
SubscriptionDataDescription	String	False		The subscription description, meant to be displayable to the customer. Use this field to optionally store an explanation of the subscription.
SubscriptionDataTrialPeriodDays	Integer	False		Integer representing the number of trial period days before the customer is charged for the first time. Has to be at least 1.
TaxIdCollectionEnabled	Boolean	False		Details on the state of tax ID collection for the payment link.
TransferDataDestination	String	False		The account (if any) the payments will be attributed to for tax reporting, and where funds from each payment will be transferred to.
TransferDataAmount	Int	False		The amount that will be transferred automatically when a charge succeeds.
Url	String	True		The public URL that can be shared with customers.
LineItems	String	False		The line items representing what is being sold. Each line item represents an item being sold.
CustomFieldsAggregate	String	False		Custom Fields object.

Pseudo-Columns

SELECT ステートメントのWHERE 句では、疑似カラムフィールドを使用して、データソースから返されるタプルを詳細に制御することができます。


Name	Type	Description
AccountId	String	The Id of the connected account.

PaymentMethods

Create, update and query the available PaymentMethods in Stripe.

Table Specific Information

Select

The Sync App uses the Stripe API to filter the results by the following columns and operators while the rest of the filter is executed client-side within the Sync App.

Id support the following operator: =.
CustomerId support the following operator: =.
Type support the following operator: =.
AccountId support the following operator: =.

The provider supports the use of all columns as criteria in the WHERE clause of SELECT statements, as long as SupportEnhancedSQL is set to True. If SupportEnhancedSQL property is set to False, you still can retrieve the PaymentMethods:

SELECT * FROM PaymentMethods WHERE Id = 'src_1MTIO2SC4snQ4WkOadEObFqk'
SELECT * FROM PaymentMethods WHERE CustomerId = 'cus_N8rO0qc7j1SJJ9'
SELECT * FROM PaymentMethods WHERE CustomerId = 'cus_N8rO0qc7j1SJJ9' AND Type = 'card'
SELECT * FROM PaymentMethods WHERE CustomerId = 'cus_N8rO0qc7j1SJJ9' AND AccountId = 'acct_1MGcyqSC4snQ4WkO'

Insert

To create a new PaymentMethod, at least Type is required:

INSERT INTO PaymentMethods (Type) VALUES ('affirm')
INSERT INTO PaymentMethods (Type, CardExpMonth, CardExpYear, CardNumber, CardCVC, BillingDetailsAddressCity, BillingDetailsAddressCountry, BillingDetailsAddressLine1, BillingDetailsAddressLine2, BillingDetailsAddressPostalCode, BillingDetailsAddressState, BillingDetailsEmail, BillingDetailsName, BillingDetailsPhone) VALUES ('card', '11', '24', '4242424242424242', '531', 'Bengaluru', 'IN', 'Neeladri', 'Ecity', '5601001', 'Karnataka', '[email protected]', 'YOEGSH MANGAL', '7728062870')

Update

To modify a PaymentMethod, specify the PaymentMethods Id and run an Update statement.

UPDATE PaymentMethods SET BillingDetailsAddressCity = 'Jaipur' WHERE Id = 'src_1MSDXZSC4snQ4WkOUER8uzmc'

Columns


Name	Type	ReadOnly	References	Description
Id [KEY]	String	True		The Id of the Payment Method.
CustomerId	String	True		The Id of the Customer.
BillingDetailsAddressCity	String	False		City, district, suburb, town, or village name for Billing Address.
BillingDetailsAddressCountry	String	False		2-letter country code for Billing Address.
BillingDetailsAddressLine1	String	False		Address line 1 for Billing Address.
BillingDetailsAddressLine2	String	False		Address line 2 for Billing Address.
BillingDetailsAddressPostalCode	String	False		ZIP or postal code for Billing Address.
BillingDetailsAddressState	String	False		State, county, province, or region for Billing Address.
BillingDetailsEmail	String	False		Email address for Billing Address.
BillingDetailsName	String	False		Full name for Billing Address.
BillingDetailsPhone	String	False		Billing phone number (including extension).
MetadataAggregate	String	False		Set of key-value pairs that you can attach to an object.
Type	String	False		The type of the PaymentMethod. The type of PaymentMethods supported are: acss_debit, affirm, afterpay_clearpay, alipay, au_becs_debit, bacs_debit, bancontact, blik, boleto, card, customer_balance, eps, fps, giropay, grabpay, ideal, klarna, konbini, oxxo, p24, paynow, pix, promptpay, sepa_debit, sofort, us_bank_account, wechat_pay, zip. 使用できる値は次のとおりです。acss_debit, affirm, afterpay_clearpay, alipay, au_becs_debit, bacs_debit, bancontact, blik, boleto, card, card_present, cashapp, customer_balance, eps, fpx, giropay, grabpay, ideal, klarna, konbini, link, oxxo, p24, paynow, paypal, pix, promptpay, revolut_pay, sepa_debit, sofort, us_bank_account, wecha_pay, zip
Object	String	True		String representing the object type. Objects of the same type share the same value.
AcssDebitBankName	String	True		Bank name for the payment method type acss_debit.
AcssDebitFingerprint	String	True		Uniquely identifies this particular bank account for the payment method type acss_debit.
AcssDebitInstitutionNumber	String	False		Institution number of the customer bank.
AcssDebitLast4	String	True		Last four digits of the bank account number for the payment method type acss_debit.
AcssDebitTransitNumber	String	False		Transit number of the customer bank.
Affirm	String	False		This hash contains details about the Affirm payment method.
AfterpayClearpay	String	False		This hash contains details about the AfterpayClearpay payment method.
Alipay	String	False		This hash contains details about the Alipay payment method.
AuBecsDebitBsbNumber	String	False		Six-digit number identifying bank and branch associated with this bank account.
AuBecsDebitFingerprint	String	True		Uniquely identifies this particular bank account for the payment method type au_becs_debit.
AuBecsDebitLast4	String	True		Last four digits of the bank account number for the payment method type au_becs_debit.
BacsDebitSortCode	String	False		Sort code of the bank account(e.g., 10-20-30). for the payment method type bacs_debit.
BacsDebitLast4	String	True		Uniquely identifies this particular bank account for the payment method type bacs_debit.
BacsDebitFingerprint	String	True		Last four digits of the bank account number for the payment method type bacs_debit.
Bancontact	String	False		This hash contains details about the Bancontact payment method.
Blik	String	False		This hash contains details about the blik payment method.
CardBrand	String	True		Card brand. Can be amex, diners, discover, jcb, mastercard, unionpay, visa, or unknown.
CardChecksAddressLine1Check	String	True		If a address line1 was provided, results of the check, one of pass, fail, unavailable, or unchecked.
CardChecksAddressPostalCodeCheck	String	True		If a address postal code was provided, results of the check, one of pass, fail, unavailable, or unchecked.
CardChecksCvcCheck	String	True		If a CVC was provided, results of the check, one of pass, fail, unavailable, or unchecked.
CardCountry	String	True		Two-letter ISO code representing the country of the card.
CardExpMonth	Integer	False		Two-digit number representing the card expiration month.
CardExpYear	Integer	False		Four-digit number representing the card expiration year.
CardFingerprint	String	True		Uniquely identifies this particular card number.
CardFunding	String	True		Card funding type. Can be credit, debit, prepaid, or unknown.
CardGeneratedFrom	String	True		Details of the original PaymentMethod that created this object.
CardLast4	String	True		The last four digits of the card.
CardNetworksAvailable	String	True		All available networks for the card.
CardNetworksPreferred	String	True		The preferred network for the card.
CardThreeDSecureUsageSupported	Boolean	True		Whether 3D Secure is supported on this card.
CardWallet	String	True		If this Card is part of a card wallet, this contains the details of the card wallet.
CashAppBuyerId	String	True		A unique and immutable identifier assigned by Cash App to every buyer.
CashAppCashTag	String	True		A public identifier for buyers using Cash App.
CustomerBalance	String	False		This hash contains details about the CustomerBalance payment method.
EpsBank	String	False		The customer bank. EPS is an Austria-based bank redirect payment method.
FpxAccountHolderType	String	True		Account holder type for FPX bank. FPX is a Malaysia-based bank redirect payment method.
FpxBank	String	False		The customer bank name and it should be Malaysia-based bank.
GIROPAY	String	False		This hash contains details about the Giropay payment method.
Grabpay	String	False		This hash contains details about the grabpay payment method.
IdealBank	String	False		The customer bank name and it is a Netherlands-based bank redirect payment method.
IdealBic	String	True		Bank Identifier code for Ideal Bank.
Konbini	String	False		This hash contains details about the konbini payment method.
Link	String	False		This hash contains details about the link payment method.
Oxxo	String	False		This hash contains details about the oxxo payment method.
P24Bank	String	False		The customer bank. P24 stands for Przelewy24 is a bank redirect payment method used in Poland.
Paynow	String	False		This hash contains details about the paynow payment method.
Paypal	String	False		This hash contains details about the paypal payment method.
Pix	String	False		This hash contains details about the pix payment method.
Promptpay	String	False		This hash contains details about the promptpay payment method.
RevolutPay	String	False		This hash contains details about the RevolutPay payment method.
SepaDebitBankCode	String	True		Bank Code for SepaDebit.
SepaDebitBranchCode	String	True		Branch Code for SepaDebit.
SepaDebitCountry	String	True		Country for SepaDebit.
SepaDebitFingerprint	String	True		Fingerprint for SepaDebit.
SepaDebitGeneratedFromCharge	String	True		SepaDebit generated from Charge.
SepaDebitGeneratedFromSetupAttempt	String	True		SepaDebit generated from setup attempt.
SepaDebitLast4	String	True		Last 4 digits of IBAN of the Bank Account.
SofortCountry	String	False		Two-letter ISO code representing the country the bank account is located in. Sofort is a bank redirect payment method used in Europe.
UsBankAccountAccountHolderType	String	False		Account holder type: individual or company.
UsBankAccountAccountType	String	False		Account type: checkings or savings. Defaults to checking if omitted.
UsBankAccountBankName	String	True		Bank name.
UsBankAccountFinancialConnectionsAccount	String	False		The ID of a Financial Connections Account to use as a payment method.
UsBankAccountFingerprint	String	True		Fingerprint of UsBank Account.
UsBankAccountLast4	String	True		Last4 digits of the UsBank Account number.
UsBankAccountNetworksPreferred	String	True		Contains information about US bank account networks that can be used. The preferred network.
UsBankAccountNetworksSupported	String	True		Contains information about US bank account networks that can be used. All supported networks.
UsBankAccountRoutingNumber	String	False		Routing number of the bank account.
UsBankAccountStatusDetails	String	True		Contains information about the future reusability of this PaymentMethod.
WechatPay	String	False		This hash contains details about the WechatPay payment method.
Zip	String	False		This hash contains details about the Zip payment method.
Created	Timestamp	True		Time at which the object was created.
Livemode	Boolean	True		Has the value true if the object exists in live mode or the value false if the object exists in test mode.
PaypalPayerId	String	True		PayPal account PayerID. PayPal account PayerID.
PaypalPayerEmail	String	True		Owner's email. Values are provided by PayPal directly (if supported) at the time of authorization or settlement.
RadarOptionsSession	String	False		A Radar Session is a snapshot of the browser metadata and device details that help Radar make more accurate predictions on your payments.

Pseudo-Columns

SELECT ステートメントのWHERE 句では、疑似カラムフィールドを使用して、データソースから返されるタプルを詳細に制御することができます。


Name	Type	Description
CardNumber	String	Card Number.
CardCVC	String	Card CVC number.
AcssDebitAccountNumber	String	Customer bank account number. Pre-authorized debit payments are used to debit Canadian bank accounts through the Automated Clearing Settlement System (ACSS).
AuBecsDebitAccountNumber	String	The account number for the bank account. BECS Direct Debit is used to debit Australian bank accounts through the Bulk Electronic Clearing System (BECS).
BacsDebitAccountNumber	String	Account number of the bank account that the funds will be debited from. Bacs Direct Debit is used to debit UK bank accounts.
BoletoTaxId	String	The tax ID of the customer. Boleto is a voucher-based payment method used in Brazil.
KlarnaDobDay	String	The day of birth, between 1 and 31 of Customer for paymentmethod type klarna.
KlarnaDobMonth	String	The month of birth, between 1 and 12 of Customer for paymentmethod type klarna.
KlarnaDobYear	String	The four-digit year of birth of Customer for paymentmethod type klarna.
SepaDebitIban	String	IBAN of the bank account. SEPA Direct Debit is used to debit bank accounts within the Single Euro Payments Area (SEPA) region.
UsBankAccountAccountNumber	String	Account number of the bank account. ACH Direct Debit is used to debit US bank accounts through the Automated Clearing House (ACH) payments system.
AccountId	String	The Id of the connected account.

Payouts

Query the available Payouts in Stripe.

Table Specific Information

Select

Server-Side Query Support

The Sync App uses the Stripe API to filter the results by the following columns and operators while the rest of the filter is executed client-side within the Sync App.

Id, Destination, Status and AccountId support the following operators: <,>>=,<,<=,=.
ArrivalDate and Created support the following operators: <,>>=,<,<=,=.

The provider supports ArrivalDate, Created, Destination and Status to be used as criteria in the WHERE clause of Select statement, as long as the SupportEnhancedSQL property is set to True.

Selecting payouts that have the given status:

SELECT * FROM Payouts WHERE status = 'paid'

If the SupportEnhancedSQL property is set to False, you still can retrieve a payout by specifying its Id:

SELECT * FROM Payouts WHERE Id = 'tr_10340J2eZvKYlo2Cg42HilbB'

Insert

To create a new Payout Amount, Currency is required.The columns that are not read-only can be inserted optionally.

INSERT INTO Payouts(amount,currency, description, Metadata,StatementDescriptor, Destination, `Method`, sourcetype) VALUES ('20','usd','I dont know this', '[{"order_id":"15426"}]','Hello World','ba_1LylJA2eZvKYlo2CFndhyBc6','standard','bitcoin_receiver' )

Update

Update can be executed by specifying Id. The columns that are not read-only can be updated optionally.

UPDATE Payouts SET Metadata='[{\"order_id\":\"25869633\"}]' where id ='po_1OPRUn2eZvKYlo2COA33LQ2S'

Columns


Name	Type	ReadOnly	References	Description
Id [KEY]	String	True		The Id of the payout.
Object	String	True		String representing the type of the object.
Amount	Integer	False		Amount (in cents) to be transferred to the bank account or debit card.
ArrivalDate	Datetime	True		Date the payout is expected to arrive in the bank. .
BalanceTransaction	String	True	BalanceTransactions.Id	The Id of the balance transaction that describes the impact of this payout on the account balance.
Created	Datetime	True		Time of creation.
Currency	String	False		Three-letter ISO currency code.
Description	String	False		The payout description.
Destination	String	False	Accounts.Id	The Id of the bank account or card the payout was sent to.
FailureBalanceTransaction	String	True		If the payout failed or was canceled, this will be the ID of the balance transaction that reversed the initial balance transaction.
FailureCode	String	True		Error code explaining reason for payout failure if available.
FailureMessage	String	True		Error code explaining reason for payout failure if available.
Metadata	String	False		Set of key/value pairs that you can attach to an object.
Method	String	False		TThe method used to send this payout. instant is only supported for payouts to debit cards. 使用できる値は次のとおりです。standard, instant
SourceType	String	False		The source balance this payout came from. 使用できる値は次のとおりです。card, bank_account, bitcoin_receiver, alipay_account, fpx
StatementDescriptor	String	False		Extra information about a payout to be displayed on the bank statement.
Status	String	True		Current status of the payout. 使用できる値は次のとおりです。paid, pending, in_transit, canceled, failed
Type	String	True		Can be bank_account or card. 使用できる値は次のとおりです。bank_account, card
Automatic	Boolean	True		Returns true if the payout was created by an automated payout schedule, and false if it was requested manually.
Livemode	Boolean	True		Has the value true if the object exists in live mode or the value false if the object exists in test mode.
OriginalPayout	String	True		If the payout reverses another, this is the ID of the original payout.
ReversedBy	String	True		If the payout was reversed, this is the ID of the payout that reverses this payout.
ReconciliationStatus	String	True		If completed, you can use the Balance Transactions API to list all balance transactions that are paid out in this payout. 使用できる値は次のとおりです。completed, in_progress, not_applicable

Pseudo-Columns

SELECT ステートメントのWHERE 句では、疑似カラムフィールドを使用して、データソースから返されるタプルを詳細に制御することができます。


Name	Type	Description
AccountId	String	The Id of the connected account to get payouts for

Persons

Usage information for the operation Persons.rsd.

Table Specific Information

Select

The Sync App uses the Stripe API to filter the results by the following columns and operators:

Id supports the following operator: =.
Account supports the following operator: =.
RelationshipDirector supports the following operator: =.
RelationshipExecutive supports the following operator: =.
RelationshipOwner supports the following operator: =.
RelationshipLegalGuardian supports the following operator: =.
RelationshipRepresentative supports the following operator: =.

The rest of the filter is executed client-side within the Sync App.

The provider supports the use of all columns as criteria in the WHERE clause of SELECT statements, as long as SupportEnhancedSQL is set to True. If SupportEnhancedSQL property is set to False, you still can retrieve the PaymentMethods:

SELECT * FROM Persons
SELECT * FROM Persons WHERE Id = '123124' AND Account = 'acc_wr3r23r'
SELECT * FROM Persons WHERE Account = 'acc_wr3r23r'
SELECT * FROM Persons WHERE Account = 'acc_wr3r23r' AND RelationshipDirector = 'true'
SELECT * FROM Persons WHERE Account = 'acc_wr3r23r' AND RelationshipExecutive = 'true'
SELECT * FROM Persons WHERE Account = 'acc_wr3r23r' AND RelationshipOwner = 'true'
SELECT * FROM Persons WHERE Account = 'acc_wr3r23r' AND RelationshipPercentOwnership = '35.5'
SELECT * FROM Persons WHERE Account = 'acc_wr3r23r' AND RelationshipRepresentative = '35'
SELECT * FROM Persons WHERE Account = 'acc_wr3r23r' AND RelationshipTitle = 'Owner'

Note : The Persons will not be fetched for standard type connected accounts.

Insert

To add a new person details to the Stripe account. Account is required

INSERT INTO Persons(Account,RegisteredAddressCity,RegisteredAddressCountry,RegisteredAddressLine1,RegisteredAddressLine2,RegisteredAddressPostalCode,RegisteredAddressState) values('acct_1OOtmyGdCIl7jorZ','jaipur','US','TestLine1','TestLine2','321001','Rajasthan')

Update

To modify a person detail, specify the Person Id and associated Account Id to run an Update statement.

UPDATE Persons SET RelationshipDirector='false' WHERE Id='123124' AND Account = 'acc_wr3r23r'

Delete

To delete a person details, specify the person Id and run a delete statement.

DELETE FROM Persons WHERE Id='123124' and AccountId='123445'

Columns


Name	Type	ReadOnly	References	Description
Id [KEY]	String	True		The Id of the person.
Account [KEY]	String	True		The mode of the Checkout Session.
Created	Datetime	True		The time at which the object was created. Measured in seconds since the Unix epoch.
DobDay	Integer	False		The day of birth, between 1 and 31.
DobMonth	Integer	False		The month of birth, between 1 and 12.
DobYear	Integer	False		The four-digit year of birth.
Email	String	False		The person's email address.
FirstName	String	False		The person's first name.
LastName	String	False		The person's last name.
MaidenName	String	False		The person’s maiden name.
FutureRequirementsAlternatives	String	True		Fields that are due and can be satisfied by providing the corresponding alternative fields instead.
FutureRequirementsCurrentlyDue	String	True		Fields that need to be collected to keep the person's account enabled.
FutureRequirementsErrors	String	True		Fields that are currently_due and need to be collected again because validation or verification failed.
FutureRequirementsEventuallyDue	String	True		Fields that need to be collected, assuming all volume thresholds are reached.
FutureRequirementsPastDue	String	True		Fields that were not collected by the account's requirements.current_deadline.
FutureRequirementsPendingVerification	String	True		Fields that may become required, depending on the results of verification or review.
IdNumber	String	False		The Id number.
IdNumberProvided	Boolean	True		Whether the person's id_number was provided.
IdNumberSecondaryProvided	Boolean	True		Whether the person’s id_number_secondary was provided.
Metadata	String	False		The set of key/value pairs that you can attach to a value list object.
RelationshipDirector	Boolean	False		Whether the person is a director of the account's legal entity.
RelationshipExecutive	Boolean	False		Whether the person has significant responsibility to control, manage, or direct the organization.
RelationshipLegalGuardian	Boolean	False		Whether the person is the legal guardian of the account’s representative.
RelationshipOwner	Boolean	False		Whether the person is an owner of the account's legal entity.
RelationshipPercentOwnership	Double	False		The percent owned by the person of the account's legal entity.
RelationshipRepresentative	Boolean	False		Whether the person is authorized as the primary representative of the account.
RelationshipTitle	String	False		The person's title
RequirementsAlternatives	String	True		Fields that are due and can be satisfied by providing the corresponding alternative fields instead.
RequirementsCurrentlyDue	String	True		Fields that need to be collected to keep the person's account enabled.
RequirementsErrors	String	True		Fields that are currently_due and need to be collected again because validation or verification failed.
RequirementsEventuallyDue	String	True		Fields that need to be collected assuming all volume thresholds are reached.
RequirementsPastDue	String	True		Fields that were not collected by the account's requirements.current_deadline.
RequirementsPendingVerification	String	True		Fields that may become required depending on the results of verification or review. If verification fails, these fields move to eventually_due or currently_due.
SsnLas4	String	False		The last 4 digits of the person's Social Security Number.
SsnLas4Provided	Boolean	True		Whether the last four digits of the person's Social Security Number have been provided (U.S. only).
VerificationAdditionalDocumentBack	String	False		The back of an Id returned by a file upload with a purpose value of identity_document.
VerificationAdditionalDocumentDetails	String	True		A user-displayable string describing the verification state of this document.
VerificationAdditionalDocumentDetailsCode	String	True		A machine-readable code specifying the verification state for this document.
VerificationAdditionalDocumentFront	String	False		The front of an Id returned by a file upload with a purpose value of identity_document.
VerificationDetails	String	True		A user-displayable string describing the verification state for the person.
VerificationDetailsCode	String	True		A machine-readable code specifying the verification state for the person.
VerificationDocumentBack	String	False		The back of an Id returned by a file upload with a purpose value of identity_document.
VerificationDocumentDetails	String	True		A user-displayable string describing the verification state of this document.
VerificationDocumentDetailsCode	String	True		A machine-readable code specifying the verification state for this document.
VerificationDocumentFront	String	False		The front of an Id returned by a file upload with a purpose value of identity_document.
VerificationStatus	String	True		The state of verification for the person. Possible values are unverified, pending, or verified.
AddressCity	String	False		The City of the person.
AddressCountry	String	False		The Country of the person.
AddressLine1	String	False		The Address line 1.
AddressLine2	String	False		The Address line 2.
AddressPostalCode	String	False		The Postal code of the person.
AddressState	String	False		The State of the person.
Phone	String	False		The person’s phone number.
AdditionalTosAcceptancesAccountDate	Datetime	False		Details on the legal guardian’s acceptance of the required Stripe agreements. The Unix timestamp marking when the account representative accepted the service agreement.
AdditionalTosAcceptancesAccountIp	String	False		Details on the legal guardian’s acceptance of the required Stripe agreements. The IP address from which the account representative accepted the service agreement.
AdditionalTosAcceptancesAccountUserAgent	String	False		Details on the legal guardian’s acceptance of the required Stripe agreements. The user agent of the browser from which the account representative accepted the service agreement.
Gender	String	False		The person’s gender (International regulations require either “male” or “female”).
Nationality	String	False		The country where the person is a national.
PoliticalExposure	String	False		Indicates if the person or any of their representatives, family members, or other closely related persons, declares that they hold or have held an important public job or function, in any jurisdiction. 使用できる値は次のとおりです。existing, none
RegisteredAddressCity	String	False		The person’s registered address. The City of the person.
RegisteredAddressCountry	String	False		The person’s registered address. The Country of the person.
RegisteredAddressLine1	String	False		The person’s registered address. The Address line 1.
RegisteredAddressLine2	String	False		The person’s registered address. The Address line 2.
RegisteredAddressPostalCode	String	False		The person’s registered address. The Postal code of the person.
RegisteredAddressState	String	False		The person’s registered address. The State of the person.

Pseudo-Columns

SELECT ステートメントのWHERE 句では、疑似カラムフィールドを使用して、データソースから返されるタプルを詳細に制御することができます。


Name	Type	Description
DocumentsCompanyAuthorizationFiles	String	Documents that may be submitted to satisfy various informational requests. One or more documents that demonstrate proof that this person is authorized to represent the company.
DocumentsPassportFiles	String	Documents that may be submitted to satisfy various informational requests. One or more documents showing the person’s passport page with photo and personal data.
DocumentsVisaFiles	String	Documents that may be submitted to satisfy various informational requests. One or more documents showing the person’s visa required for living in the country where they are residing.
FullNameAliases	String	A list of alternate names or aliases that the person is known by.
IdNumberSecondary	String	The person’s secondary ID number, as appropriate for their country, will be used for enhanced verification checks.
PersonToken	String	A person token, used to securely provide details to the person.

Plans

Create, update, delete, and query the available Plans in Stripe.

Table Specific Information

Select

Server-Side Query Support

The Sync App uses the Stripe API to filter the results by the following columns and operators while the rest of the filter is executed client-side within the Sync App.

Id, Active, AccountId, and ProductId support the following operators: =.
Created support the following operators: <,>>=,<,<=,=.

The provider supports the use of all columns as criteria in the WHERE clause of SELECT statements, as long as SupportEnhancedSQL is set to True. If SupportEnhancedSQL property is set to False, you still can retrieve:

Plan by specifying its Id:

SELECT * FROM Plans WHERE Id = 'gold'

Plans created after a specific date(Created may be used with the >, >=, <, <=, or = conditions and may be used twice to specify a range):

SELECT * FROM Plans WHERE Created > '2016-01-03'

Insert

ProductId or ProductName, Currency and Interval columns are required to create a new plan.

INSERT INTO Plans (Active, AggregateUsage, BillingScheme, Currency, Nickname, ProductName, ProductActive, ProductStatementDescriptor, ProductTaxCode, ProductUnitLabel, [Interval], IntervalCount, TrialPeriodDays, UsageType, Tiersmode, TiersAggregate, MetadataAggregate) values (true,'last_ever','tiered','aud','Test2','MYNEWPRODUCT6',true,'Example statement','txcd_30040003','TestLabel','week',3,15,'metered','volume','[{\"up_to\":\"inf\",\"flat_amount_decimal\":\"356\",\"unit_amount_decimal\":\"785\"}]','[{\"Test\":\"123\",\"Test1\":\"456\",\"Test2\":\"789\"}]'

Note:There are multiple ways to create a new plan. For more details, please refer to the API documentation.

Update

To update a plan, specify Id column.

UPDATE Plans set Active =false, MetadataAggregate = '[{\"order_id\":\"124\"}]', Nickname = 'updatednickname', TrialPeriodDays = 25, ProductId = 'prod_PDnk45sKPO58Cy' where Id = 'plan_PDnshHrzdDXeUE'

Delete

To delete a plan specify the Id of the plan.

DELETE FROM Plans WHERE Id = '123easdas5'

Columns


Name	Type	ReadOnly	References	Description
Id [KEY]	String	False		The Id of the plan.
Active	Boolean	False		Whether the plan can be used for new purchases.
Amount	Integer	False		The amount in cents to be charged on the interval specified.
AmountDecimal	Decimal	False		The decimal value of amount in cents to be charged on the interval specified.
UnitAmount	Decimal	True		The amount in cents to be charged on the interval specified.
AggregateUsage	String	False		Specifies a usage aggregation strategy for plans of usage_type=metered. 使用できる値は次のとおりです。last_during_period, last_ever, max, sum
BillingScheme	String	False		Describes how to compute the price per period. Either per_unit or tiered. 使用できる値は次のとおりです。per_unit, tiered
Created	Datetime	True		The creation date.
Currency	String	False		Currency in which subscription will be charged.
Nickname	String	False		A brief description of the plan, hidden from customers.
ProductId	String	False		The product whose pricing this plan determines.
ProductName	String	False		The product whose pricing this plan determines. The product’s name, meant to be displayable to the customer.
ProductActive	Boolean	False		The product whose pricing this plan determines. Whether the product is currently available for purchase. Defaults to true.
ProductMetadata	String	False		The product whose pricing this plan determines. Set of key-value pairs that you can attach to an object.
ProductStatementDescriptor	String	False		The product whose pricing this plan determines. An arbitrary string to be displayed on your customer’s credit card or bank statement.
ProductTaxCode	String	False		The product whose pricing this plan determines. A tax code ID.
ProductUnitLabel	String	False		The product whose pricing this plan determines. A label that represents units of this product.
LiveMode	Boolean	True		Has the value true if the object exists in live mode or the value false if the object exists in test mode.
Interval	String	False		One of day, week, month or year. The frequency with which a subscription should be billed. 使用できる値は次のとおりです。day, week, month, year
IntervalCount	Integer	False		The number of intervals (specified in the interval property) between each subscription billing. For example, interval=month and interval_count=3 bills every 3 months.
TrialPeriodDays	Integer	False		Number of trial period days granted when subscribing a customer to this plan. Null if the plan has no trial period.
MetadataAggregate	String	False		Number of trial period days granted when subscribing a customer to this plan. Null if the plan has no trial period.
TiersAggregate	String	False		Each element represents a pricing tier.
TiersMode	String	False		Defines if the tiering price should be graduated or volume based.
TransformUsageDivideBy	Integer	False		Divide usage by this number.
TransformUsageRound	String	False		After division, either round the result up or down.
UsageType	String	False		Configures how the quantity per period should be determined. Can be either metered or licensed.

Pseudo-Columns

SELECT ステートメントのWHERE 句では、疑似カラムフィールドを使用して、データソースから返されるタプルを詳細に制御することができます。


Name	Type	Description
AccountId	String	The Id of the connected account to get plans for.

Prices

Create, update, and query the available prices in Stripe.

Table Specific Information

Select

Server-Side Query Support

The Sync App uses the Stripe API to filter the results by the following columns and operators while the rest of the filter is executed client-side within the Sync App.

Id supports the following operator: =.
Active supports the following operator: =.
Created supports the following operator: =,>=,<=,>,<.
Currency supports the following operator: =.
LookupKey supports the following operator: =.
MetadataAggregate supports the following operator: =.
Product supports the following operator: =.
RecurringInterval supports the following operator: =.
RecurringUsageType supports the following operator: =.
Type supports the following operator: =.
AccountId supports the following operator: =.

The provider supports the use of all columns as criteria in the WHERE clause of SELECT statements, as long as SupportEnhancedSQL is set to True. If SupportEnhancedSQL property is set to False, you still can retrieve:

Price by specifying its Id:

SELECT * FROM Prices WHERE Id = 'price_1HeiRmATXQzBWNrlQOSoEytH'

Prices created after a specific date(Created may be used with the >, >=, <, <=, or = conditions and may be used twice to specify a range):

SELECT * FROM Plans WHERE Created > '2016-01-03'

Insert

ProductId or ProductName, Currency are required to create a price.

INSERT INTO Prices (Active, BillingScheme, LookupKey, Nickname, Currency, Product, RecurringInterval, RecurringAggregateUsage, RecurringIntervalCount, RecurringUsageType, TransformQuantityDivideBy, TransformQuantityRound, UnitAmount, TaxBehavior) VALUES (true, 'per_unit', 'def', 'test_insert', usd, 'prod_P8AoSHyvPlfYMp', 'month', 'max', 3, 'metered', 2, 'up', 10, 'unspecified')

INSERT INTO Prices (Active, BillingScheme, Currency, LookupKey, MetadataAggregate, Nickname, Product, RecurringInterval, RecurringAggregateUsage, RecurringIntervalCount, RecurringUsageType, Tiersmode, TiersAggregate) values (false, 'tiered', 'usd', 'TestKey5', '[{\"A\":\"BCD\",\"E\":\"FGH\",\"I\":\"JKL\"}]', 'Nickname1', 'prod_PDm7du7ErjMSwY', 'week', 'last_during_period', 5, 'metered', 'volume', '[{\"up_to\":\"inf\",\"flat_amount_decimal\":\"356\",\"unit_amount_decimal\":\"785\"}]')

Note:There are multiple ways to create a new plan. For more details, please refer to the API documentation.

Update

To update a price, specify Id column.

UPDATE Prices SET Active = false, MetadataAggregate = '{\"title\" : \"test price\"}'  WHERE Id = 'price_1HeiRmATXQzBWNrlQOSoEytH'

Delete

Delete is not supported.

Columns


Name	Type	ReadOnly	References	Description
Id [KEY]	String	True		The Id of the price.
Active	Boolean	False		Whether the price can be used for new purchases.
BillingScheme	String	False		Describes how to compute the price per period.
Created	Datetime	True		The creation date.
Currency	String	False		Currency in which subscription will be charged.
CustomUnitAmountEnabled	Boolean	False		Pass in true to enable custom_unit_amount, otherwise omit custom_unit_amount.
CustomUnitAmountMaximum	Integer	False		The maximum unit amount the customer can specify for this item.
CustomUnitAmountMinimum	Integer	False		The minimum unit amount the customer can specify for this item. Must be at least the minimum charge amount.
CustomUnitAmountPreset	Integer	False		The starting unit amount which can be updated by the customer.
LookupKey	String	False		A lookup key used to retrieve prices dynamically from a static string.
MetadataAggregate	String	False		Set of key-value pairs that you can attach to an object.
Nickname	String	False		A brief description of the plan, hidden from customers.
Product	String	False	Products.Id	The Id of the product this price is associated with.
ProductDataName	String	False		These fields can be used to create a new product that this price will belong to. The product's name, meant to be displayable to the customer.
ProductDataActive	Boolean	False		These fields can be used to create a new product that this price will belong to. Whether the product is currently available for purchase. Defaults to true.
ProductDataMetadata	String	False		These fields can be used to create a new product that this price will belong to. Set of key-value pairs that you can attach to an object.
ProductDataStatementDescriptor	String	False		These fields can be used to create a new product that this price will belong to. An arbitrary string to be displayed on your customer's credit card or bank statement.
ProductDataTaxCode	String	False		These fields can be used to create a new product that this price will belong to. A tax code ID.
ProductDataUnitLabel	String	False		These fields can be used to create a new product that this price will belong to. A label that represents units of this product. When set, this will be included in customers' receipts, invoices, Checkout, and the customer portal.
RecurringInterval	String	False		The frequency at which a subscription is billed. One of day, week, month or year. 使用できる値は次のとおりです。day, month, week, year
RecurringAggregateUsage	String	False		Specifies a usage aggregation strategy for prices of usage_type=metered.
RecurringIntervalCount	Integer	False		The number of intervals (specified in the interval attribute) between subscription billings. For example, interval=month and interval_count=3 bills every 3 months.
RecurringUsageType	String	False		Configures how the quantity per period should be determined. Can be either metered or licensed. Defaults to licensed. 使用できる値は次のとおりです。licensed, metered
Type	String	True		Value is either 'one_time' or 'recurring' depending on whether the price is for a one-time purchase or a recurring (subscription) purchase. 使用できる値は次のとおりです。one_time, recurring
TiersAggregate	String	False		Array of elements representing a pricing tier.
TiersMode	String	False		Defines if the tiering price should be graduated or volume based.
TransformQuantityDivideBy	Integer	False		Apply a transformation to the reported usage or set quantity before computing the billed price. Cannot be combined with tiers. Divide usage by this number.
TransformQuantityRound	String	False		Apply a transformation to the reported usage or set quantity before computing the billed price. Cannot be combined with tiers. After division, either round the result up or down.
UnitAmount	Integer	False		The unit amount in paise to be charged, represented as a whole integer if possible.
UnitAmountDecimal	String	False		The unit amount in paise to be charged, represented as a decimal string
Object	String	True		String representing the object's type. Objects of the same type share the same value.
Livemode	Boolean	True		Has the value true if the object exists in live mode or the value false if the object exists in test mode.
TaxBehavior	String	False		Specifies whether the price is considered inclusive of taxes or exclusive of taxes. One of inclusive, exclusive, or unspecified. Once specified as either inclusive or exclusive, it cannot be changed.

Pseudo-Columns

SELECT ステートメントのWHERE 句では、疑似カラムフィールドを使用して、データソースから返されるタプルを詳細に制御することができます。


Name	Type	Description
AccountId	String	The Id of the connected account to get prices for.
TransferLookupKey	Boolean	If set to true, will atomically remove the lookup key from the existing price, and assign it to this price.

Products

Query the available products in Stripe.

Table Specific Information

Select

Server-Side Query Support

The Sync App uses the Stripe API to filter the results by the following columns and operators while the rest of the filter is executed client-side within the Sync App.

Id, Active, Created, Shippable, Type, and Url support the following operators: IN,<,>>=,<,<=,=.

The following query retrieves all products:

SELECT * FROM Products

The provider supports the use of all columns as criteria in the WHERE clause of SELECT statements, as long as SupportEnhancedSQL is set to True. If SupportEnhancedSQL property is set to False, you still can retrieve:

Product by specifying its Id:

SELECT * FROM Products WHERE Id = '12345678'

Product by specifying its Ids:

SELECT * FROM Products WHERE Id IN ('12345678', '123456789', '123456788',)

Products that can be shipped:

SELECT * FROM Products WHERE Shippable = 'true'

Products for a given URL:

SELECT * FROM Products WHERE URL = '/v1/skus?product=1234\u0026active=true'

Active Products:

SELECT * FROM Products WHERE Active = True

Products created after a certain date (Created may be used with the >, >=, <, <=, or = conditions and may be used twice to specify a range):

SELECT * FROM Products WHERE Created > '12/1/2015'

Insert

Name are required to create a product.

INSERT INTO Products(Name,images,featuresAggregate,MetadataAggregate) values ('asdwd','[\"http://da.cs/fs.jpg\",\"http://da.cs/fss.jpg\"]','[{\"name\":\"asdsa\"}]','[{\"nsame\":\"asdsa\"}]')

Update

To update a product, specify Id column.

Update Products set Name = 'fafs' where id = 'prod_PEcZQqWgJzbBCW'

Delete

To delete a product, specify Id column.

Delete Products where id = 'prod_PEcZQqWgJzbBCW'

Columns


Name	Type	ReadOnly	References	Description
Id [KEY]	String	False		ID of product.
Active	Boolean	False		Whether or not the product is currently available for purchase. afterwards stripe:version = 2016-06-15 setting active to false no longer marks the product's SKUs as inactive.
FeaturesAggregate	String	False		A list of up to 5 attributes that each SKU can provide value.
AttributesAggregate	String	False		A list of up to 5 attributes that each SKU can provide value.
Caption	String	True		A short one-line description of the product, meant to be displayable to the customer.
Created	Datetime	True		The time when product is created.
DefaultPrice	String	False		The ID of the Price object that is the default price for this product. Can be used in Update.
Description	String	False		The product's description, meant to be displayable to the customer.
Name	String	False		The product's name, meant to be displayable to the customer.maximum character length limit of 250
PackageDimensionsHeight	Double	False		The height dimension of this product for shipping purposes.
PackageDimensionsLength	Double	False		The length dimension of this product for shipping purposes.
PackageDimensionsWeight	Double	False		The weight dimension of this product for shipping purposes.
PackageDimensionsWidth	Double	False		The width dimension of this product for shipping purposes.
Shippable	Boolean	False		Whether this product is a shipped good.
StatementDescriptor	String	False		Extra information about a charge for the credit card statement of the customer.
Updated	Datetime	True		The last updated time.
Type	String	True		The type of the product.
Url	String	False		The URL of a publicly-accessible webpage for this product.
TaxCode	String	False		A tax code ID.
Livemode	Boolean	True		Tells if the dispute is in livemode.
MetadataAggregate	String	False		Set of key-value pairs
Object	String	True		String representing the object's type. Objects of the same type share the same value.
UnitLabel	String	False		A label that represents units of this product in Stripe and on customers receipts and invoices. When set, this will be included in associated invoice line item descriptions.
Images	String	False		A list of up to 8 URLs of images for this product, meant to be displayable to the customer.

Pseudo-Columns

SELECT ステートメントのWHERE 句では、疑似カラムフィールドを使用して、データソースから返されるタプルを詳細に制御することができます。


Name	Type	Description
AccountId	String	The Id of the connected account to get products for.

PromotionCodes

Creates, updates, and retrieves a promotion code that represents a customer-redeemable code for a coupon.

Table Specific Information

Select

The Sync App uses the Stripe API to filter the results by the following column and operator:

Id supports the following operator: =.
Active supports the following operator: =.
Code supports the following operator: =.
CouponId supports the following operator: =.
Created supports the following operator: =,>,>=,<,<=.
Customer supports the following operator: =.
AccountId supports the following operator: =.

The rest of the filter is executed client-side within the Sync App.

The provider supports the use of all columns as criteria in the WHERE clause of SELECT statements, as long as SupportEnhancedSQL is set to True. If SupportEnhancedSQL property is set to False, you still can retrieve the PaymentMethods:

SELECT * FROM PromotionCodes
SELECT * FROM PromotionCodes WHERE Id = '123124'

Insert

To create a promotion code for the CouponId is required:

INSERT INTO PromotionCodes (Active, Code, CouponId, Customer, MaxRedemptions) values ('true', 'FIRST5', 'WN3VpE01', 'cus_NBs3z63zmfCJy1' ,4)

INSERT INTO PromotionCodes (Code, Active, Customer, CouponId, Metadata, Expiresat, MaxRedemptions, RestrictionsFirstTimeTransaction, RestrictionsMinimumAmount, RestrictionsMinimumAmountCurrency) values ('TestCode', true, 'cus_PE90A5xYP8TpeM', 'WG4hYi8e', '[{"A":"BCD","E":"FGH","I":"JKL"}]', '2023-12-30 12:40:20', 15, true, 25, 'eur')

Update

To modify a promotion code, specify the code Id and run an Update statement.

UPDATE PromotionCodes SET Active='false' WHERE id='123124'

Delete

Delete is not supported.

Columns


Name	Type	ReadOnly	References	Description
Id [KEY]	String	True		The Id of the promotion code.
Active	Boolean	False		Whether the promotion code is currently active. A promotion code is only active if the coupon is also valid.
Code	String	False		The customer-facing code.
CouponAmountOff	Integer	True		The amount (in the currency specified) that is taken off the subtotal of any invoices for this customer.
CouponCreated	Datetime	True		The time at which the coupon was created.
CouponCurrency	String	True		If amount_off has been set, the three-letter ISO code for the currency of the amount to take off.
CouponDuration	String	True		One of forever, once, and repeating.
CouponDurationInMonths	Integer	True		If duration is repeating, the number of months the coupon applies. The value is Null if coupon duration is forever or once.
CouponId	String	False		The Id of the coupon.
CouponLivemode	Boolean	True		true if the object is in live mode andfalse if in test mode.
CouponMaxRedemptions	Integer	True		The maximum number of times this coupon can be redeemed, in total, across all customers, before it is no longer valid.
CouponMetadata	String	True		The set of key-value pairs that you can attach to a coupon.
CouponName	String	True		Name of the coupon displayed to customers.
CouponPercentOff	Double	True		The percent to be taken off the subtotal of any invoices for this customer for the duration of the coupon.
CouponRedeemBy	Datetime	True		The date after which the coupon can no longer be redeemed.
CouponTimesRedeemed	Integer	True		The number of times this coupon has been applied to a customer.
CouponAppliesToProducts	Integer	True		Contains information about what this coupon applies to. A list of product IDs this coupon applies to.
CouponValid	Boolean	True		Whether this coupon can still be applied to a customer, taking the above properties into account .
Created	Datetime	True		The time at which the object was created. Measured in seconds since the Unix epoch.
Customer	String	False		The customer that this promotion code can be used by.
ExpiresAt	Datetime	False		The date at which the promotion code can no longer be redeemed.
Livemode	Boolean	True		true if the object is in live mode andfalse if in test mode.
MaxRedemptions	Integer	False		The maximum number of times this promotion code can be redeemed.
Metadata	String	False		The set of key/value pairs that you can attach to a value list object.
RestrictionsCurrencyOptions	String	False		Promotion codes defined in each available currency option. Each key must be a three-letter ISO currency code and a supported currency.
RestrictionsFirstTimeTransaction	Boolean	False		A Boolean indicating if the Promotion Code should only be redeemed for Customers without any successful payments or invoices.
RestrictionsMinimumAmount	Integer	False		The minimum amount required to redeem this Promotion Code into a Coupon.
RestrictionsMinimumAmountCurrency	String	False		A three-letter ISO code for minimum_amount.
TimesRedeemed	Integer	True		The number of times this promotion code has been used.

Pseudo-Columns

SELECT ステートメントのWHERE 句では、疑似カラムフィールドを使用して、データソースから返されるタプルを詳細に制御することができます。


Name	Type	Description
AccountId	String	The Id of the connected account to get promotion code for.

Quotes

Creates, updates, and queries the quotes available.

Table Specific Information

Select

The Sync App uses the Stripe API to filter the results by the following columns and operators:

Id supports the following operator: =.
CustomerId supports the following operator: =.
Status supports the following operator: =.
TestClock supports the following operator: =.

The rest of the filter is executed client-side within the Sync App.

The provider supports the use of all columns as criteria in the WHERE clause of SELECT statements, as long as SupportEnhancedSQL is set to True. If SupportEnhancedSQL property is set to False, you still can retrieve the PaymentMethods:

SELECT * FROM Quotes
SELECT * FROM Quotes WHERE Id = '123124'
SELECT * FROM Quotes WHERE CustomerId = 'cus_NVasad'
SELECT * FROM Quotes WHERE Status = 'draft'
SELECT * FROM Quotes WHERE TestClock = 'clock_id'

Insert

To create a quote for the invoice:

INSERT INTO Quotes (AutomaticTaxEnabled, CollectionMethod, CustomerId, Description, InvoiceSettingsDaysUntilDue, Metadata, SubscriptionDataTrialPeriodDays) values ('false', 'send_invoice', 'cus_NBs3z63zmfCJy1', 'Thanks for using YMBusiness!!', 25, '{"name":"test name 2", "surname":"test surname", "age" : "23"}', 20)

INSERT INTO Quotes (DefaultTaxRates, FromQuote, Discounts, TransferData, LineItems) VALUES ('[\"txr_1OL7oy2eZvKYlo2CLylDtkiI\",\"txr_1OL7oo2eZvKYlo2CHliiOEZT\"]', '{\"quote\":\"qt_1N6vEL2eZvKYlo2CwySMFZbA\",\"is_revision\":\"true\"}', '{\"coupon\":\"test1\"}', '{\"destination\":\"acc_123566677\",\"amount\":\"440\",\"amount_percent\":\"23\"}', '[{\"price\":\"price_1OM02h2eZvKYlo2CiiTU7dCm\",\"quantity\":\"10\"}]')

Update

To modify a quote, specify the quote Id and run an Update statement.

UPDATE Quotes SET InvoiceSettingsDaysUntilDue = 20 WHERE id='123124'

Columns


Name	Type	ReadOnly	References	Description
Id [KEY]	String	True		The Id of the quotes.
AmountSubtotal	Integer	True		The total before any discounts or taxes are applied.
AmountTotal	Integer	True		The total after discounts and taxes are applied.
Application	String	True		The Id of the Connect Application that created the quote.
ApplicationFeeAmount	Integer	False		The amount of the application fee.
ApplicationFeePercent	Double	False		A non-negative decimal between 0 and 100, with at most two decimal places.
AutomaticTaxEnabled	Boolean	False		Automatically calculates taxes.
AutomaticTaxStatus	String	True		The status of the most recent automated tax calculation for this quote.
CollectionMethod	String	False		The method to collect charge money, either charge_automatically or send_invoice.
ComputedRecurring	String	True		The definitive totals and line items the customer is charged on a recurring basis.
ComputedUpfrontAmountSubtotal	Integer	True		The total before any discounts or taxes are applied.
ComputedUpfrontAmountTotal	Integer	True		The total after discounts and taxes are applied.
ComputedUpfrontTotalDetailsAmountDiscount	Integer	True		The sum of all the discounts.
ComputedUpfrontTotalDetailsAmountShipping	Integer	True		The sum of all the shipping amounts.
ComputedUpfrontTotalDetailsAmountTax	Integer	True		The sum of all the tax amounts.
Created	Datetime	True		The time at which the object was created. Measured in seconds since the Unix epoch.
Currency	String	True		A three-letter ISO currency code, in lowercase.
CustomerId	String	False		The Id of the customer.
DefaultTaxRates	String	False		The tax rates applied to this quote.
Description	String	False		A description that is displayed on the quote PDF.
Discounts	String	False		The discounts applied to this quote.
ExpiresAt	Datetime	False		The date on which the quote is canceled if in open or draft status.
Footer	String	False		A footer that is displayed on the quote PDF.
FromQuote	String	False		Details of the quote that was cloned.
Header	String	False		A header that is displayed on the quote PDF.
InvoiceId	String	True		The Id of the invoice that was created from this quote.
InvoiceSettingsDaysUntilDue	Integer	False		The number of days within which a customer must pay invoices generated by this quote.
Livemode	Boolean	True		true if the object is in live mode andfalse if in test mode.
LineItems	String	False		The line items representing what is being sold. Each line item represents an item being sold.
Metadata	String	False		The set of key/value pairs that you can attach to a value list object.
Number	String	True		A unique number that identifies this particular quote.
OnBehalfOf	String	False		The account on behalf of which to charge.
Status	String	True		The status of the quote.
StatusTransitionsAcceptedAt	Datetime	True		The time that the quote was accepted.
StatusTransitionsCanceledAt	Datetime	True		The time that the quote was canceled.
StatusTransitionsFinalizedAt	Datetime	True		The time that the quote was finalized.
Subscription	String	True		The subscription that was created or updated from this quote.
SubscriptionDataDescription	String	False		The subscription's description, meant to be displayable to the customer.
SubscriptionDataEffectiveDate	Datetime	False		When creating a new subscription, the date of which the subscription schedule starts after the quote is accepted.
SubscriptionDataTrialPeriodDays	Integer	False		An integer representing the number of trial period days before the customer is charged for the first time.
SubscriptionSchedule	String	True		The subscription schedule that was created or updated from this quote.
TestClock	String	False		The Id of the test clock this quote belongs to.
TotalDetailsAmountDiscount	Integer	True		The sum of all the discounts.
TotalDetailsAmountShipping	Integer	True		The sum of all the shipping amounts.
TotalDetailsAmountTax	Integer	True		The sum of all the tax amounts.
TransferData	String	False		The account (if any) the payments are attributed to for tax reporting, and where funds from each payment are transferred to for each of the invoices.

Pseudo-Columns

SELECT ステートメントのWHERE 句では、疑似カラムフィールドを使用して、データソースから返されるタプルを詳細に制御することができます。


Name	Type	Description
AccountId	String	The Id of the connected account for which to get a quote.

Refunds

Create and query the available refunds in Stripe.

Table Specific Information

Select

Server-Side Query Support

The Sync App uses the Stripe API to filter the results by the following columns and operators while the rest of the filter is executed client-side within the Sync App.

Id, Charge, PaymentIntent and AccountId support the following operators: =.
Created support the following operators: <,>>=,<,<=,=.

The provider supports the use of all columns as criteria in the WHERE clause of SELECT statements, as long as SupportEnhancedSQL is set to True. If SupportEnhancedSQL property is set to False, you still can retrieve:

-a Refund by specifying its Id:

SELECT * FROM Refunds WHERE Id = 're_19keFRGOsuAdslZgO7zSbS2j'

-Refunds for the charge specified by Charge Id:

SELECT * FROM Refunds WHERE Charge = 'MyChargeId'

Insert

To insert a refund, provide a Charge Id.

INSERT INTO Refunds (Charge, Amount, Reason) VALUES ('ch_fj57lKDg460322552g', 40, 'duplicate')

INSERT INTO Refunds (Charge, Amount, Reason, MetadataAggregate) values ('ch_3LrL0PHWDgcyHde00jCW5AYz', 100, 'duplicate', '[{\"A\":\"BCD\",\"E\":\"FGH\",\"I\":\"JKL\"}]')

Update

UPDATE is not supported.

Delete

Delete is not supported.

Columns


Name	Type	ReadOnly	References	Description
Id [KEY]	String	True		The Id of the refund.
Charge	String	False		The Id of the charge that was refunded.
Amount	Integer	False		The Amount, in cents.
Status	String	True		The status of the refund.
BalanceTransaction	String	True		The balance transaction that describes the impact on your account balance.
Created	Datetime	True		The refund datetime.
Currency	String	True		Three-letter ISO code representing the currency.
Reason	String	False		The reason for the refund.
ReceiptNumber	String	True		This is the transaction number that appears on email receipts sent for this refund.
MetadataAggregate	String	False		The refund metadata object.
Description	String	True		An arbitrary string attached to the object. Often useful for displaying to users.
PaymentIntent	String	False		ID of the PaymentIntent that was refunded.
Object	String	True		String representing the object's type. Objects of the same type share the same value.
FailureBalanceTransaction	String	True		If the refund failed, this balance transaction describes the adjustment made on your account balance that reverses the initial balance transaction.
FailureReason	String	True		If the refund failed, the reason for refund failure if known. 使用できる値は次のとおりです。lost_or_stolen_card, expired_or_canceled_card, or unknown.
NextAction	String	True		This property will describe what the refund needs in order to continue processing.
SourceTransferReversal	String	True		The transfer reversal that is associated with the refund. Only present if the charge came from another Stripe account. See the Connect documentation for details.
TransferReversal	String	True		If the accompanying transfer was reversed, the transfer reversal object. Only applicable if the charge was created using the destination parameter.
InstructionsEmail	String	True		For payment methods without native refund support (for example, Konbini, PromptPay), provide an email address for the customer to receive refund instructions.

Pseudo-Columns

SELECT ステートメントのWHERE 句では、疑似カラムフィールドを使用して、データソースから返されるタプルを詳細に制御することができます。


Name	Type	Description
AccountId	String	The Id of the connected account to get refunds for.

ShippingRates

Query the available Shipping rates in Stripe.

Table Specific Information

Select

The Sync App uses the Stripe API to filter the results by the following columns and operators:

Id supports the following operator: =.
Active supports the following operator: =.
Created supports the following operator: =,>,>=,<,<=.
AccountId supports the following operator: =.
FixedAmountCurrency supports the following operator: =.

The rest of the filter is executed client-side within the Sync App.

SELECT * FROM ShippingRates
SELECT * FROM ShippingRates WHERE Id = 'shr_1MHKKGSC4snQ4WkONC7OYQuS'
SELECT * FROM ShippingRates WHERE Id = 'shr_1MHKKGSC4snQ4WkONC7OYQuS' AND AccountId = 'acct_1MGcyqSC4snQ4WkO'

Insert

DisplayName and Type are required to create a ShippingRate.

INSERT INTO ShippingRates(DisplayName,Type,MetadataAggregate,FixedAmountAmount,FixedAmountCurrency) values ('asdsswd','fixed_amount','[{\"nsame\":\"asdsa\"}]',230,'usd')

Update

To update a ShippingRate, specify Id column.

Update ShippingRates set active = true where id = 'shr_1OQ9ScCZ8rn6qR6h3H86TWDn'

Columns


Name	Type	ReadOnly	References	Description
Id [KEY]	String	True		The Id of the Shipping Rates.
Active	Boolean	False		Whether the shipping rate can be used for new purchases. Its default value is true.
Created	Timestamp	True		Time at which the object was created. Measured in seconds since the Unix epoch.
DeliveryEstimateMaximumUnit	String	False		A unit of time.
DeliveryEstimateMaximumValue	Integer	False		Must be greater than 0.
DeliveryEstimateMinimumUnit	String	False		A unit of time.
DeliveryEstimateMinimumValue	Integer	False		Must be greater than 0.
DisplayName	String	False		The name of the shipping rate, meant to be displayable to the customer.
FixedAmountAmount	Integer	False		A non-negative integer in cents representing how much to charge.
FixedAmountCurrency	String	False		Three-letter ISO currency code, in lowercase. Must be a supported currency.
Livemode	Boolean	True		Has the value true if the object exists in live mode or the value false if the object exists in test mode.
MetadataAggregate	String	False		Set of key-value pairs
Object	String	True		The Object type.
TaxBehavior	String	False		Whether the rate is considered inclusive of taxes or exclusive of taxes.
TaxCode	String	False		Tax code Id.
Type	String	False		The type of calculation to use on the shipping rate.

Pseudo-Columns

SELECT ステートメントのWHERE 句では、疑似カラムフィールドを使用して、データソースから返されるタプルを詳細に制御することができます。


Name	Type	Description
AccountId	String	The Id of the connected account.

SubscriptionItems

Create, update, delete, and query the available subscription items in Stripe.

Table Specific Information

Select

Server-Side Query Support

The Sync App uses the Stripe API to filter the results by the following columns and operators while the rest of the filter is executed client-side within the Sync App.

Id, SubscriptionId and AccountId support the following operator: =.

To query SubscriptionItems table, the Id of the subscription (SubscriptionId) whose items are retrieved is required:

SELECT * FROM SubscriptionItems WHERE SubscriptionId = 'sub_A9WZGVTbvgBJ4t'

In addition to SubscriptionId, provider supports all columns to be used as criteria in the WHERE clause of Select statement, as long as SupportEnhancedSQL is set to True. If SupportEnhancedSQL property is set to False, you still can retrieve a SubscriptionItem by specifying its Id:

SELECT * FROM SubscriptionItems WHERE Id = 'sit_A9WZGVTbvgBJ4t'

Insert

SubscriptionId and PlanId columns are required to create a new subscription item.

INSERT INTO SubscriptionItems (SubscriptionId, PlanId, ProrationDate, Quantity) VALUES ('sub_1OMqdl2eZvKYlo2CIci8bOT8', 'price_1OPjac2eZvKYlo2Cm8XeR5YQ', '2014-12-12', 10)

Update

To update a subscription item, specify the Id column.

UPDATE SubscriptionItems SET PlanId = 'price_1OPjac2eZvKYlo2Cm8XeR5YQ', ProrationDate = '2014-12-12', Quantity = 12 WHERE Id = 'si_PDakKMQHunYX0k'

Delete

To delete a subscription item specify the Id of the item.

DELETE FROM SubscriptionItems WHERE Id = 'sit_A9WZGVTbvgBJ4t'

Columns


Name	Type	ReadOnly	References	Description
Id [KEY]	String	True		The Id of the subscription item.
SubscriptionId	String	False	Subscriptions.Id	The Id of the subscription.
PlanId	String	False	Plans.Id	The Id of the plan.
Quantity	Double	False		The quantity of the plan to which the customer should be subscribed.
Created	Datetime	True		Creation date.
MetadataAggregate	String	False		Set of key-value pairs that you can attach to an object. This can be useful for storing additional information about the object in a structured format.
PriceId	String	False	Prices.Id	Unique identifier for the price.
Object	String	True		String representing the object's type. Objects of the same type share the same value.
BillingThresholdsUsageGte	Integer	False		Usage threshold that triggers the subscription to create an invoice
TaxRatesAggregate	String	False		The tax rates which apply to this subscription_item. When set, the default_tax_rates on the subscription do not apply to this subscription_item.

Pseudo-Columns

SELECT ステートメントのWHERE 句では、疑似カラムフィールドを使用して、データソースから返されるタプルを詳細に制御することができます。


Name	Type	Description
IsProrate	Boolean	Flag indicating whether to prorate switching plans during a billing cycle.
ProrationDate	Date	If set, the proration will be calculated as though the subscription was updated at the given time.
PaymentBehavior	String	Payment Behavior. Valid for INSERT, DELETE and UPDATE. 使用できる値は次のとおりです。allow_incomplete, default_incomplete, error_if_incomplete, pending_if_incomplete
ProrationBehavior	String	Determines how to handle prorations when the billing cycle changes. Valid for INSERT, DELETE and UPDATE. 使用できる値は次のとおりです。always_invoice, create_prorations, none
AccountId	String	The Id of the connected account to get subscription items for

Subscriptions

Create, update, delete, and query the available Subscriptions in Stripe.

Table Specific Information

Select

Server-Side Query Support

The Sync App uses the Stripe API to filter the results by the following columns and operators while the rest of the filter is executed client-side within the Sync App.

Id, CustomerId, PlanId, Status, MetadataAggregate, AutomaticTaxEnabled, CollectionMethod, TestClock and AccountId support the following operator: =.
CreatedAt support the following operator: =,!=,>,>=,<,<=.

The provider supports the use of all columns as criteria in the WHERE clause of SELECT statements, as long as SupportEnhancedSQL is set to True. If SupportEnhancedSQL property is set to False, you still can retrieve:

-a Subscription by specifying its Id:

SELECT * FROM Subscriptions WHERE Id = 'mySubscriptionId'

-Subscriptions created after a specific date (Created may be used with the >, >=, <, <=, or = conditions and may be used twice to specify a range):

SELECT * FROM Subscriptions WHERE CreatedAt > '2016-01-03'

-Subscriptions that belong to a Customer:

SELECT * FROM Subscriptions WHERE CustomerId = 'cus_12345678'

-Subscriptions that belong to a Plan:

SELECT * FROM Subscriptions WHERE PlanId = 'myPlanId'

-Subscriptions with a specific Status:

SELECT * FROM Subscriptions WHERE Status = 'active'

-Subscriptions with Metadata:

SELECT * from Subscriptions where MetadataAggregate ='{\"fdgm\":\"gdfgkm\"}'

Insert

CustomerId and ItemsAggregate columns are required to create a new subscription .

INSERT INTO Subscriptions (CustomerId, TrialEnd, ItemsAggregate,CancelAtPeriodEnd) VALUES ('cus_PDYvuww0WynoTg', '2023-12-22', '[{\"price\": \"43\",\"quantity\":\"12\"}]', true)

Alternatively, you can also provide CustomerId and PlanId columns to create a new subscription .

INSERT INTO Subscriptions (CustomerId, PlanId, TrialEnd,CancelAtPeriodEnd) VALUES ('cus_LMchUD47S8Eumg', 'price_1ONAgvCZ8rn6wdu','2024-12-22', true)

Update

To update a subscription, specify Id column.

UPDATE Subscriptions SET ApplicationFeePercent = 0, MetadataAggregate='[{\"order\":\"14453\"}]' WHERE Id = 'sub_A9WZGVTbvgBJ4t'

Delete

To delete a subscription specify the Id of the subscription.

DELETE FROM Subscriptions WHERE Id = 'sub_A9WZGVTbvgBJ4t'

Columns


Name	Type	ReadOnly	References	Description
Id [KEY]	String	True		The Id of the subscription.
CustomerId	String	False	Customers.Id	The Id of the customer who owns the subscription.
PlanId	String	False	Plans.Id	The Id of the plan.
ApplicationFeePercent	Decimal	False		A positive decimal that represents the fee percentage of the subscription invoice amount that will be transferred to the application of the Stripe account owner each billing period.
CancelAtPeriodEnd	Boolean	False		If the subscription has been canceled with the at_period_end flag set to true, cancel_at_period_end on the subscription will be true. You can use this attribute to determine whether a subscription that has a status of active is scheduled to be canceled at the end of the current period.
CanceledAt	Datetime	True		If the subscription has been canceled, the date of that cancellation. If the subscription was canceled with cancel_at_period_end, canceled_at will still reflect the date of the initial cancellation request, not the end of the subscription period when the subscription is automatically moved to a canceled state.
CreatedAt	Datetime	True		The creation date.
CurrentPeriodEnd	Datetime	True		End of the current period that the subscription has been invoiced for. At the end of this period, a new invoice will be created.
CurrentPeriodStart	Datetime	True		Start of the current period that the subscription has been invoiced for.
CouponId	String	False		The id of the discount coupon.
EndedAt	Datetime	True		If the subscription has ended (either because it was canceled or because the customer was switched to a subscription to a new plan), the date the subscription ended.
Quantity	Double	True		The quantity of the plan to which the customer should be subscribed. For example, if your plan is $10/user/month, and your customer has 5 users, you could pass 5 as the quantity to have the customer charged $50 (5 x $10) monthly.
StartDate	Datetime	True		Date the most recent update to this subscription started.
Status	String	True		The status of the subscription 使用できる値は次のとおりです。active, past_due, unpaid, canceled, incomplete, incomplete_expired, trialing, all, ended, paused
TaxPercent	Decimal	True		If provided, each invoice created by this subscription will apply the tax rate, increasing the amount billed to the customer.
TrialEnd	Datetime	False		If the subscription has a trial, the end of that trial.
TrialStart	Datetime	True		If the subscription has a trial, the beginning of that trial.
MetadataAggregate	String	False		The set of key/value pairs that you can attach to a subscription object.
BillingCycleAnchor	Datetime	False		Determines the date of the first full invoice, and, for plans with month or year intervals, the day of the month for subsequent invoices.
DefaultPaymentMethod	String	False		ID of the default payment method for the subscription
ItemsAggregate	String	False		List of subscription items, each with an attached price.
LatestInvoice	String	True		The ID of the most recent invoice this subscription has generated.
PendingSetupIntent	String	True		You can use this SetupIntent to collect user authentication when creating a subscription without immediate payment or updating a subscription's payment method, allowing you to optimize for off-session payments.
PendingUpdate	String	True		If specified, pending updates that will be applied to the subscription once the latest_invoice has been paid.
BillingThresholds	String	False		Define thresholds at which an invoice will be sent, and the subscription advanced to a new billing period
AutomaticTaxEnabled	Boolean	False		Automatic tax settings for this subscription.
CollectionMethod	String	False		Either charge_automatically, or send_invoice. When charging automatically, Stripe will attempt to pay this subscription at the end of the cycle using the default source attached to the customer. 使用できる値は次のとおりです。charge_automatically, send_invoice
DaysUntilDue	Integer	False		Number of days a customer has to pay invoices generated by this subscription. This value is null for subscriptions where collection_method=charge_automatically
DefaultSource	String	False		ID of the default payment source for the subscription.
DefaultTaxRates	String	False		The tax rates that will apply to any subscription item that does not have tax_rates set. Invoices created will have their default_tax_rates populated from the subscription.
LiveMode	Integer	True		Has the value true if the object exists in live mode or the value false if the object exists in test mode.
NextPendingInvoiceItemInvoice	Datetime	True		Specifies the approximate timestamp on which any pending invoice items will be billed according to the schedule provided at pending_invoice_item_interval
PauseCollectionBehavior	String	False		If specified, payment collection for this subscription will be paused. The payment collection behavior for this subscription while paused. One of keep_as_draft, mark_uncollectible, or void.
PauseCollectionResumesAt	Datetime	False		If specified, payment collection for this subscription will be paused. The time after which the subscription will resume collecting payments.
PaymentSettings	String	False		Payment settings passed on to invoices created by the subscription.
PendingInvoiceItemInterval	String	False		Specifies an interval for how often to bill for any pending invoice items. It is analogous to calling Create an invoice for the given subscription at the specified interval. Specifies invoicing frequency. Either day, week, month or year.
PendingInvoiceItemIntervalCount	Integer	False		Specifies an interval for how often to bill for any pending invoice items. It is analogous to calling Create an invoice for the given subscription at the specified interval. The number of intervals between invoices.
Schedule	String	True		The schedule attached to the subscription
TestClock	String	True		ID of the test clock this customer belongs to.
TransferData	String	False		The account (if any) the subscription's payments will be attributed to for tax reporting, and where funds from each payment will be transferred to for each of the subscription's invoices.
CancelAt	Datetime	False		A date in the future at which the subscription will automatically get canceled.
Description	String	False		The subscription's description.
CancellationDetailsComment	String	False		Details about why this subscription was cancelled. Additional comments about why the user canceled the subscription, if the subscription was canceled explicitly by the user.
CancellationDetailsFeedback	String	False		Details about why this subscription was cancelled. The customer submitted reason for why they canceled, if the subscription was canceled explicitly by the user.
CancellationDetailsReason	String	False		Details about why this subscription was cancelled. The reason why this subscription was cancelled.
Currency	String	False		Three-letter ISO currency code, in lowercase. Must be a supported currency.
TrialSettingsEndBehaviorPaymentMethod	String	False		Settings related to subscription trials. Indicates how the subscription should change when the trial ends if the user did not provide a payment method. 使用できる値は次のとおりです。cancel, pause, create_invoice
OnBehalfOf	String	False		The account on behalf of which to charge, for each of the subscription?s invoices.
DiscountId	String	True		The Id of the discount.
DiscountCheckoutSession	String	True		The Checkout session that this coupon is applied to, if it is applied to a particular session in payment mode. Will not be present for subscription mode.
DiscountCustomer	String	True		The ID of the customer associated with this discount.
DiscountStart	Datetime	True		If the subscription has a trial, the beginning of that trial.
DiscountEnd	Datetime	True		If the subscription has a trial, the end of that trial.
DiscountInvoice	String	True		The invoice that the discount's coupon was applied to, if it was applied directly to a particular invoice.
DiscountInvoiceItem	String	True		The invoice line item id that the discount's coupon was applied to if it was applied directly to a invoice line item.
DiscountPromotionCode	String	True		The promotion code applied to create this discount.The promotion code applied to create this discount.
DiscountSubscription	String	True		The subscription that this coupon is applied to, if it is applied to a particular subscription.
DiscountCouponCreatedAt	Datetime	True		The creation date.
DiscountCouponCurrency	String	True		If amount_off has been set, the three-letter ISO code for the currency of the amount to take off.
DiscountCouponName	String	True		Name of the coupon displayed to customers on, for instance, invoices or receipts.
DiscountCouponDuration	String	True		One of forever, once, and repeating. Describes how long a customer who applies this coupon will get the discount.
DiscountCouponDurationInMonths	Integer	True		the number of months the coupon applies.
DiscountCouponAmountOff	Integer	True		Amount (in the currency specified) that is taken off the subtotal of any invoices for this customer.
DiscountCouponPercentOff	Integer	True		Percent that will be taken off the subtotal of any invoices for this customer for the duration of the coupon. For example, a coupon with a percent_off of 50 will make a $100 invoice $50 instead.
DiscountCouponValid	Boolean	True		Taking account of the above properties, whether this coupon can still be applied to a customer.
DiscountCouponMaxRedemptions	Integer	True		Maximum number of times this coupon can be redeemed, in total, before it is no longer valid.
DiscountCouponRedeemBy	Datetime	True		Date after which the coupon can no longer be redeemed.
DiscountCouponTimesRedeemed	Integer	True		Number of times this coupon has been applied to a customer.
DiscountCouponObject	String	True		String representing the object's type. Objects of the same type share the same value.
DiscountCouponLiveMode	Boolean	True		Has the value true if the object exists in live mode or the value false if the object exists in test mode.
DiscountCouponMetadataAggregate	String	True		Set of key-value pairs that you can attach to an object.

Pseudo-Columns

SELECT ステートメントのWHERE 句では、疑似カラムフィールドを使用して、データソースから返されるタプルを詳細に制御することができます。


Name	Type	Description
IsProrate	Boolean	Flag indicating whether to prorate switching plans during a billing cycle.
ProrationDate	Date	If set, the proration will be calculated as though the subscription was updated at the given time. It can also be used to implement custom proration logic, such as prorating by day instead of by second, by providing the time that you wish to use for proration calculations.
PaymentBehavior	String	Use allow_incomplete to transition the subscription to status=past_due if a payment is required but cannot be paid. This allows you to manage scenarios where additional user actions are needed to pay a subscription?s invoice.
ProrationBehavior	String	Determines how to handle prorations when the billing cycle changes (e.g., when switching plans, resetting billing_cycle_anchor=now, or starting a trial), or if an item?s quantity changes. The default value is create_prorations.
TrialPeriodDays	Integer	The number of trial period days before the customer is charged for the first time. If set, trial_period_days overrides the default trial period days of the plan the customer is being subscribed to.
AccountId	String	The Id of the connected account to get subscriptions for.

TaxRates

Creates, updates, and queries the tax rates that applies to Invoices, Subscriptions, and Checkout Sessions to collect tax.

Table Specific Information

Select

The Sync App uses the Stripe API to filter the results by the following columns and operators:

Id supports the following operator: =.
Active supports the following operator: =.
Created supports the following operators: >,>=,<,<=,=.
Inclusive supports the following operator: =.
AccountId supports the following operator: =.

The rest of the filter is executed client-side within the Sync App.

The provider supports the use of all columns as criteria in the WHERE clause of SELECT statements, as long as SupportEnhancedSQL is set to True. If SupportEnhancedSQL property is set to False, you still can retrieve the PaymentMethods:

SELECT * FROM TaxRates
SELECT * FROM TaxRates WHERE Id = '123124'
SELECT * FROM TaxRates WHERE Active = 'true'
SELECT * FROM TaxRates WHERE Created >= '2023-07-14T05:36:46.000-04:00'
SELECT * FROM TaxRates WHERE Inclusive = 'true'

Insert

To create a new tax rate:

INSERT INTO TaxRates (Active, Country, Description, DisplayName, Inclusive, Jurisdiction, Percentage, TaxType) values ('true', 'IN', 'GST', 'GST India.', 'false', 'IN', '18', 'sales_tax')

Update

To modify a tax rate, specify the tax rate Id and run an Update statement:

UPDATE TaxRates SET Description='GST for Country India' WHERE Id='123124'

Columns


Name	Type	ReadOnly	References	Description
Id [KEY]	String	True		The Id of the tax rates
Active	Boolean	False		Defaults to true. When set to false, this tax rate cannot be used with new applications or Checkout Sessions, but still works for subscriptions and invoices that already have it set.
Country	String	False		A two-letter country code.
Created	Datetime	True		The time at which the object was created. Measured in seconds since the Unix epoch.
Description	String	False		An arbitrary string attached to the tax rate for your internal use only. It is not visible to your customers.
DisplayName	String	False		The display name of the tax rates as it appears to your customer on their receipt email, PDF, and the hosted invoice page.
EffectivePercentage	Double	True		The actual/effective tax rate percentage out of 100.
Inclusive	Boolean	False		Specifies if the tax rate is inclusive or exclusive.
Jurisdiction	String	False		The jurisdiction for the tax rate. You can use this label field for tax reporting purposes.
Livemode	Boolean	True		true if the object is in live mode andfalse if in test mode.
Metadata	String	False		The set of key/value pairs that you can attach to a value list object.
Percentage	Double	False		The tax rate percentage out of 100.
State	String	False		An ISO 3166-2 subdivision code, without country prefix.
TaxType	String	False		The high-level tax type, such as vat or sales_tax. 使用できる値は次のとおりです。amusement_tax, communications_tax, gst, hst, igst, jct, lease_tax, pst, qst, rst, sales_tax, service_tax, vat

Pseudo-Columns

SELECT ステートメントのWHERE 句では、疑似カラムフィールドを使用して、データソースから返されるタプルを詳細に制御することができます。


Name	Type	Description
AccountId	String	The Id of the connected account to get topups for.

TopUps

Creates, updates, and queries the top-up of the Stripe balance.

Table Specific Information

Select

The Sync App uses the Stripe API to filter the results by the following columns and operators while the rest of the filter is executed client-side within the Sync App.

Id supports the following operator: =.
Amount supports the following operator: =.
Created supports the following operator: >,>=,<,<=,=.
Status supports the following operator: =.
AccountId supports the following operator: =.

The provider supports the use of all columns as criteria in the WHERE clause of SELECT statements, as long as SupportEnhancedSQL is set to True. If SupportEnhancedSQL property is set to False, you still can retrieve the PaymentMethods:

SELECT * FROM TopUps
SELECT * FROM TopUps WHERE Id = '123124'
SELECT * FROM TopUps WHERE Amount = 1500
SELECT * FROM TopUps WHERE Created >= '2023-07-14T05:36:46.000-04:00'
SELECT * FROM TopUps WHERE Status = 'succeeded'

Insert

To create a new topup, atleast Amount and Currency are required:

INSERT INTO TopUps (Amount, Currency, Description) values (500, 'USD', 'This is the first topup of 5000 USD.')

Update

To modify a topups, specify the topup Id and run an Update statement.

UPDATE TopUps SET Description='This is the initial topup of 500 USD.' WHERE Id='123124'

Columns


Name	Type	ReadOnly	References	Description
Id [KEY]	String	True		The Id of the top-ups.
Amount	Integer	False		The amount transferred.
BalanceTransaction	String	True		The Id of the balance transaction.
Created	Datetime	True		The time at which the object was created. Measured in seconds since the Unix epoch.
Currency	String	False		A three-letter ISO currency code, in lowercase.
Description	String	False		The top-up description.
ExpectedAvailabilityDate	Datetime	True		The date the funds are expected to arrive in the Stripe account for payouts.
FailureCode	String	True		An error code explaining reason for top-up failure if available.
FailureMessage	String	True		A message to the user that further explains reason for top-up failure if available.
Livemode	Boolean	True		true if the object exists in live mode and false if in test mode.
Metadata	String	False		The set of key/value pairs that you can attach to a value list object.
Source	String	True		The source details of the Stripe user.
StatementDescriptor	String	False		Extra information about a top-up.
Status	String	True		The status of the top-up is either canceled, failed, pending, reversed, or succeeded.
TransferGroup	String	False		A string that identifies this top-up as part of a group.

Pseudo-Columns

SELECT ステートメントのWHERE 句では、疑似カラムフィールドを使用して、データソースから返されるタプルを詳細に制御することができます。


Name	Type	Description
SourceId	String	The ID of a source to transfer funds from. It is a psuedo column only supported for insert.
AccountId	String	The Id of the connected account to get topups for.

TransferReversals

Create, update, and query the available reversals belonging to a specific transfer.

Table Specific Information

Select

Server-Side Query Support

The Sync App uses the Stripe API to filter the results by the following columns and operators while the rest of the filter is executed client-side within the Sync App.

Id supports the following operator: =.
Transfer supports the following operator: =.
AccountId supports the following operator: =.

To query the TransferReversals table, the Id of the transfer whose reversals are retrieved is required:

SELECT * FROM  TransferReversals WHERE Transfer = 'tr_12345678'

In addition to Transfer, the Sync App supports all columns to be used as criteria in the WHERE clause of a SELECT statement, as long as SupportEnhancedSQL is set to True. If SupportEnhancedSQL property is set to False, you still can retrieve a Reversal by specifying its Id:

SELECT * FROM  TransferReversals WHERE Id = 'tr_12345678' AND Transfer = 'tr_12345678'

Insert

The Transfer column is required to insert to this table:

INSERT INTO TransferReversals (Amount, Transfer) VALUES (2000, 'tr_12345678')

Update

To update Metadata or Description in this table, specify both Id and Transfer:

UPDATE TransferReversals SET Metadata = '{"Description": "test metadata update"}' WHERE Id = 'trr_13jgn4kj' AND Transfer = 'tr_12345678'

UPDATE TransferReversals SET Description = 'Test Description' WHERE Id = 'trr_13jgn4kj' AND Transfer = 'tr_12345678'

Columns


Name	Type	ReadOnly	References	Description
Id [KEY]	String	True		The Id of the reversal.
Transfer [KEY]	String	False		The Id of the transfer that was reversed.
Amount	Integer	False		A positive integer in cents representing how much of this transfer to reverse.
RefundApplicationFee	Boolean	False		Boolean indicating whether the application fee should be refunded when reversing this transfer.
Currency	String	True		The currency.
Metadata	String	False		Set of key-value pairs that you can attach to an object. This can be useful for storing additional information about the object in a structured format.
Object	String	True		String representing the object's type. Objects of the same type share the same value.
BalanceTransaction	String	True		Balance transaction that describes the impact on your account balance.
DestinationPaymentRefund	String	True		Linked payment refund for the transfer reversal.
Created	Datetime	True		Time at which the object was created. Measured in seconds since the Unix epoch.
SourceRefund	String	True		ID of the refund responsible for the transfer reversal.

Pseudo-Columns

SELECT ステートメントのWHERE 句では、疑似カラムフィールドを使用して、データソースから返されるタプルを詳細に制御することができます。


Name	Type	Description
Description	String	An arbitrary string which you can attach to a reversal object. It is displayed alongside the reversal in the dashboard. This will be unset if you POST an empty value.
AccountId	String	The Id of the connected account to get Transfer reversals for.

Transfers

Create, update, and query the available transfers in Stripe.

Table Specific Information

Select

Server-Side Query Support

The Sync App uses the Stripe API to filter the results by the following columns and operators while the rest of the filter is executed client-side within the Sync App.

Id, AccountId and Destination support the following operator: =.
Created support the following operators: <,>>=,<,<=, =.

The provider supports all columns to be used as criteria in the WHERE clause of a SELECT statement, as long as SupportEnhancedSQL is set to True. If SupportEnhancedSQL property is set to False, you can still retrieve:

-a Transfer by specifying its Id:

SELECT * FROM Transfers WHERE Id = 'tr_12345678'

-a Transfer created after a specific date (Created may be used with the >, >=, <, <=, or = conditions and may be used twice to specify a range):

SELECT * FROM Transfers WHERE Created = '2023-07-21 19:00:27.0'

-Transfers created after a specific date (Created may be used with the >, >=, <, <=, or = conditions and may be used twice to specify a range):

SELECT * FROM Transfers WHERE Created > '12/2/2015'

Insert

Currency, Amount, and Destination are required to insert into this table. The Destination is the Id of a connected Stripe account:

INSERT INTO Transfers (Amount, Currency, Destination, TransferGroup) VALUES (1000, 'USD', 'acct_19abC2DFGl5DVRzj', 'ORDER_95')

Update

To update a transfer, set a description or metadata and specify an Id in the WHERE clause:

UPDATE Transfers SET Description = 'New desc', MetadataAggregate = '{\"test\" : \"test\"}' WHERE Id = 'tr_123456788' )

Delete

Delete is not supported.

Columns


Name	Type	ReadOnly	References	Description
Id [KEY]	String	True		The Id of the transfer.
Currency	String	False		The currency.
Amount	Integer	False		Amount (in cents) to be transferred to your bank account.
AmountReversed	Integer	True		Amount in cents reversed (can be less than the amount attribute on the transfer if a partial reversal was issued).
ApplicationFee	String	True		The application fee.
BalanceTransaction	String	True		Balance transaction that describes the impact of this transfer on your account balance.
Created	Datetime	True		Time that this record of the transfer was first created.
Date	Datetime	True		Date the transfer is scheduled to arrive in the bank. This doesn't factor in delays like weekends or bank holidays.
Description	String	False		Internal-only description of the transfer.
Destination	String	False		The Id of the bank account, card, or Stripe account the transfer was sent to.
DestinationPayment	String	True		If the destination is a Stripe account, this will be the Id of the payment that the destination account received for the transfer.
FailureCode	String	True		Error code explaining reason for transfer failure if available.
FailureMessage	String	True		Message to user further explaining reason for transfer failure if available.
Reversed	Boolean	True		Whether or not the transfer has been fully reversed. If the transfer is only partially reversed, this attribute will still be false.
SourceTransaction	String	False		The Id of the charge (or other transaction) that was used to fund the transfer. If null, the transfer was funded from the available balance.
SourceType	String	False		The source balance this transfer came from.
StatementDescriptor	String	True		Extra information about a transfer to be displayed on the user's bank statement.
Status	String	True		Current status of the transfer.
Type	String	True		The type of the transfer.Can be card, bank_account, or stripe_account.
MetadataAggregate	String	False		The transfer metadata object.
Object	String	True		String representing the object's type. Objects of the same type share the same value.
Livemode	Boolean	True		Has the value true if the object exists in live mode or the value false if the object exists in test mode.
ReversalsAggregate	String	True		A list of reversals that have been applied to the transfer.
TransferGroup	String	False		A string that identifies this transaction as part of a group.

Pseudo-Columns

SELECT ステートメントのWHERE 句では、疑似カラムフィールドを使用して、データソースから返されるタプルを詳細に制御することができます。


Name	Type	Description
AccountId	String	The Id of the connected account to get transfers for.

UsageRecords

Creates and retrieves the customer usage and metrics to Stripe for metered billing for subscription prices.

Table Specific Information

Select

The Sync App uses the Stripe API to filter the results by the following columns and operators while the rest of the filter is executed client-side within the Sync App.

Id supports the following operator: =.
SubscriptionItem supports the following operator: =.
AccountId supports the following operator: =.

The provider supports the use of all columns as criteria in the WHERE clause of SELECT statements, as long as SupportEnhancedSQL is set to True. If SupportEnhancedSQL property is set to False, you still can retrieve the UsageRecords:

To fetch UsageRecords SubscriptionItem is required

SELECT * FROM UsageRecords WHERE SubscriptionItem='si_NBswnjzMefKen7'

Insert

To create a usage record for the subscription item, atleast SubscriptionItem is required:

INSERT INTO UsageRecords (SubscriptionItem, Timestamp, Quantity) values ('si_NBswnjzMefKen7', '2023-07-14T05:36:46.000-04:00', 100)

Columns


Name	Type	ReadOnly	References	Description
Id [KEY]	String	True		The Id of the usage record.
Invoice	String	True		The Id of the invoice.
Livemode	Boolean	True		true if the object is in live mode andfalse if in test mode.
PeriodEnd	Datetime	True		The time of the period end.
PeriodStart	Datetime	True		The time of the period start.
Quantity	Integer	False		The usage quantity for the specified date.
SubscriptionItem	String	True		The Id of the subscription item.
Timestamp	Datetime	False		The timestamp for the usage event.
TotalUsage	Integer	True		The total usage.

Pseudo-Columns

SELECT ステートメントのWHERE 句では、疑似カラムフィールドを使用して、データソースから返されるタプルを詳細に制御することができます。


Name	Type	Description
AccountId	String	The Id of the connected account to get value list for.

ValueListItems

Creates, deletes, and queries the Values list items.

Table Specific Information

Select

The Sync App uses the Stripe API to filter the results by the following columns and operators while the rest of the filter is executed client-side within the Sync App.

Id supports the following operator: =.
Created supports the following operator: >,>=,<,<=,=.
Value supports the following operator: =,LIKE.
ValueList supports the following operator: =.
AccountId supports the following operator: =.

The provider supports the use of all columns as criteria in the WHERE clause of SELECT statements, as long as SupportEnhancedSQL is set to True. If SupportEnhancedSQL property is set to False, you still can retrieve the PaymentMethods:

SELECT * FROM ValueListItems
SELECT * FROM ValueListItems WHERE Id = '123124'
SELECT * FROM ValueListItems WHERE Created >= '2023-07-14T05:36:46.000-04:00'
SELECT * FROM ValueListItems WHERE Value = 'This is the value.'
SELECT * FROM ValueListItems WHERE ValueList = 'rsl_1MGcyqSC4snQ'

Insert

To create value list items:

INSERT INTO ValueListItems (Value, ValueList) values ('This is the list item.', 'rsl_1MGcyqSC4snQ')

Delete

To delete a value list ites, specify the list item Id and run a delete statement.

DELETE FROM ValueListItems WHERE Id='123124'

Columns


Name	Type	ReadOnly	References	Description
Id [KEY]	String	True		The Id of the value list items.
Created	Datetime	True		The time at which the object was created. Measured in seconds since the Unix epoch.
CreatedBy	String	True		The name or email address of the user who created this value list.
Livemode	Boolean	True		true if the object exists in live mode and false if in test mode.
Value	String	False		The value of the item.
ValueList	String	False		The Id of the value list.

Pseudo-Columns

SELECT ステートメントのWHERE 句では、疑似カラムフィールドを使用して、データソースから返されるタプルを詳細に制御することができます。


Name	Type	Description
AccountId	String	The Id of the connected account to get value list for.

ValueLists

Creates, updates, deletes, and queries values in a list.

Table Specific Information

Select

The Sync App uses the Stripe API to filter the results by the following columns and operators while the rest of the filter is executed client-side within the Sync App.

Id supports the following operator: =.
Alias supports the following operator: =.
Created supports the following operator: >,>=,<,<=,=.
AccountId supports the following operator: =.

The provider supports the use of all columns as criteria in the WHERE clause of SELECT statements, as long as SupportEnhancedSQL is set to True. If SupportEnhancedSQL property is set to False, you still can retrieve the PaymentMethods:

SELECT * FROM ValueLists
SELECT * FROM ValueLists WHERE Id = '123124'
SELECT * FROM ValueLists WHERE Alias = 'customer_email_list'
SELECT * FROM ValueLists WHERE Created >= '2023-07-14T05:36:46.000-04:00'

Insert

To create value lists:

INSERT INTO ValueLists (Alias, ItemType, Name) values ('customer_email_li', 'email', 'Customer Email List')

Update

To modify a value lists, specify the list Id and run an Update statement.

UPDATE ValueLists SET Alias ='customer_email_list' WHERE id='123124'

Delete

To delete a value lists, specify the list Id and run a delete statement.

DELETE FROM ValueLists WHERE Id='123124'

Columns


Name	Type	ReadOnly	References	Description
Id [KEY]	String	True		The Id of the value list.
Alias	String	False		The name of the value list for use in rules.
Created	Datetime	True		Time at which the object was created. Measured in seconds since the Unix epoch.
CreatedBy	String	True		The name or email address of the user who created this value list.
ItemType	String	False		The type of items in the value list. Possible values are card_fingerprint, card_bin, email, ip_address, country, string, case_sensitive_string, or customer_id.
ListItemsUrl	String	True		The URL where this list can be accessed.
Livemode	Boolean	True		true if the object is in live mode andfalse if in test mode.
Name	String	False		The name of the value list.
Metadata	String	False		The set of key/value pairs that you can attach to a value list object.

Pseudo-Columns

SELECT ステートメントのWHERE 句では、疑似カラムフィールドを使用して、データソースから返されるタプルを詳細に制御することができます。


Name	Type	Description
AccountId	String	The Id of the connected account to get value list for.

ビュー

ビューは、データを示すという点でテーブルに似ていますが、ビューは読み取り専用です。

クエリは、ビューに対して通常のテーブルと同様に実行することができます。

Stripe Connector for CData Sync ビュー


Name	Description
ApplicationFeeRefunds	Returns a list of application fees youve previously collected.
ApplicationFees	Returns a list of file links.
Authorizations	Returns a list of Issuing Authorization objects. The objects are sorted in descending order by creation date, with the most recently created object appearing first.
AvailableBalance	Query the Available Balance in Stripe.
BalanceChangeFromActivitySummaryReport	Query the Balance change from activity summary report in Stripe.
BalanceSummaryReport	Query the Balance Summary report in Stripe.
BalanceTransactions	Query Balance History in Stripe.
Cardholders	Returns a list of Issuing Cardholder objects. The objects are sorted in descending order by creation date, with the most recently created object appearing first.
CashBalance	Get the cash balance for the customer.
CheckoutSessionLineItems	Returns a list of Checkout Sessions.
CountrySpecs	Query the available Country Specs in Stripe.
CustomerBalanceTransactions	Returns a list of transactions that updated the customers balances.
CustomerSubscriptions	Get the available subscriptions of a Customer.
EarlyFraudWarning	Query an early fraud reported by the customer.
EndingBalanceReconciliationSummaryReport	Query the Ending balance reconciliation summary report in Stripe.
EndingBalanceReconciliationSummaryReportInternal	Query the Ending balance reconciliation summary report in Stripe.
Events	Query the available events in Stripe.
FileLinks	Returns a list of file links.
Files	Retrieves a file hosted on Stripe's servers.
InvoiceDiscounts	Get the available discounts of invoices in Stripe.
InvoiceItemDiscounts	Get the available discounts from invoices items in Stripe.
InvoiceLineItemDiscounts	Get the available discounts from invoices line items in Stripe.
InvoiceLineItems	Query the available invoices line items in Stripe.
IssuingCards	Returns a list of Issuing Card objects.
IssuingDisputes	Returns a list of Issuing Dispute objects.
ItemizedBalanceChangeFromActivityReport	Query the Itemized balance change from Activity report in Stripe.
ItemizedEndingBalanceReconciliationReport	Query the Itemized ending balance change from activity report in Stripe.
ItemizedPayoutReconciliationReport	Query the Itemized payout reconciliation report in Stripe.
ItemizedPayoutsReport	Query the Itemized payouts report in Stripe.
ItemizedReconciliationForASinglePayoutReport	Query the Itemized reconciliation for a single payout report in Stripe.
Orders	Query the available orders in Stripe.
PaymentLinkLineItems	Query the available PaymentLink line items in Stripe.
PaymentMethodDomains	Lists the details of existing payment method domains.
PayoutsReconciliationSummaryForASinglePayoutReport	Payouts reconciliation summary for a single payout in Stripe.
PayoutsReconciliationSummaryReport	Query the Payouts reconciliation summary report in Stripe.
PayoutsSummaryReport	Query the Payouts summary report in Stripe.
PendingBalance	Query the available balance in Stripe.
Reports	To Create and Query the Report Run object, which represents an instance of a report type generated with specific run parameters.
Reviews	Queries the reviews.
SetupAttempts	Returns a list of SetupAttempts that associate with a provided SetupIntent.
SetupIntents	Returns a list of SetupIntents.
Skus	Query the available SKUs in Stripe.
SubscriptionSchedules	Retrieves the list of your subscription schedules.
Transactions	Returns a list of Issuing Transaction objects. The objects are sorted in descending order by creation date, with the most recently created object appearing first.

ApplicationFeeRefunds

Returns a list of application fees youve previously collected.

Table Specific Information

Select

Server-Side Query Support

The Sync App uses the Stripe API to filter the results by the following columns and operators while the rest of the filter is executed client-side within the Sync App.

ApplicationFeeId support the following operator: =.
Id support the following operator: =.

The provider supports the use of all columns as criteria in the WHERE clause of SELECT statements, as long as SupportEnhancedSQL is set to True. If SupportEnhancedSQL property is set to False, you still can retrieve:

To query the ApplicationFees we can try the below queries.

SELECT * from ApplicationFeeRefunds

SELECT * from ApplicationFeeRefunds where applicationfeeid = 'fee_1ACvR6I2xUg5aQMAnqlDqwJY'

SELECT * from ApplicationFeeRefunds where id = 'fr_A2ZYOWsSreeFvP'

Columns


Name	Type	References	Description
Id [KEY]	String		The id of files.
ApplicationFeeId [KEY]	String		The Id of the application fee.
Amount	Integer		Amount, in cents.
BalanceTransaction	String		Balance transaction that describes the impact on your account balance.
Currency	String		Three-letter ISO currency code, in lowercase. Must be a supported currency.
Created	Datetime		Time at which the object was created. Measured in seconds since the Unix epoch.
MetadataAggregate	String		The set of key/value pairs that you can attach to a an object.

Pseudo-Columns

SELECT ステートメントのWHERE 句では、疑似カラムフィールドを使用して、データソースから返されるタプルを詳細に制御することができます。


Name	Type	Description
AccountId	String		The Id of the connected account to get files for.

ApplicationFees

Returns a list of file links.

Table Specific Information

Select

Server-Side Query Support

The Sync App uses the Stripe API to filter the results by the following columns and operators while the rest of the filter is executed client-side within the Sync App.

Id support the following operator: =.
Charge support the following operator: =.

The provider supports the use of all columns as criteria in the WHERE clause of SELECT statements, as long as SupportEnhancedSQL is set to True. If SupportEnhancedSQL property is set to False, you still can retrieve:

To query the ApplicationFees we can try the below queries.

SELECT * from ApplicationFees

SELECT * from ApplicationFees where charge = 'py_1Ofr5O2cbZNns1OzqCZGhR9a'

Columns


Name	Type	References	Description
Id [KEY]	String		The id of files.
Amount	Integer		Amount, in cents.
AmountRefunded	Integer		Amount in cents refunded (can be less than the amount attribute on the fee if a partial refund was issued).
Application	String		ID of the Connect application that earned the fee.
BalanceTransaction	String		Balance transaction that describes the impact on your account balance.
Charge	String		ID of the charge that the application fee was taken from.
Currency	String		Three-letter ISO currency code, in lowercase. Must be a supported currency.
Created	Datetime		Time at which the object was created. Measured in seconds since the Unix epoch.
Livemode	Boolean		Has the value true if the object exists in live mode or the value false if the object exists in test mode.
OriginatingTransaction	String		ID of the corresponding charge on the platform account, if this fee was the result of a charge using the destination parameter.
Refunded	Boolean		Whether the fee has been fully refunded. If the fee is only partially refunded, this attribute will still be false.
Refunds	String		A list of refunds that have been applied to the fee.
AccountId	String		The Id of the connected account to get files for.

Authorizations

Returns a list of Issuing Authorization objects. The objects are sorted in descending order by creation date, with the most recently created object appearing first.

Table Specific Information

Select

Server-Side Query Support

The Sync App uses the Stripe API to filter the results by the following columns and operators while the rest of the filter is executed client-side within the Sync App.

Id support the following operator: =.
CardId support the following operator: =.
CardCardholderId support the following operator: =.
Status support the following operator: =.
Created support the following operator: =.

The provider supports the use of all columns as criteria in the WHERE clause of SELECT statements, as long as SupportEnhancedSQL is set to True. If SupportEnhancedSQL property is set to False, you still can retrieve:

To query the Authorizations we can try the below queries.

SELECT * from Authorizations

SELECT * from Authorizations where CardId = 'ic_1Nsse72eZvKYlo2CWBGm2WQ5'

SELECT * from Authorizations where CardCardholderId = 'ich_1NpvWO2eZvKYlo2CAQ7YPOvp'

SELECT * from Authorizations where Id = 'iauth_1ObVV22eZvKYlo2C9UYAEpOT'

Columns


Name	Type	References	Description
Id [KEY]	String		Unique identifier for the object.
Amount	Integer		The total amount that was authorized or rejected.
AmountDetailsAtmFee	Integer		The fee charged by the ATM for the cash withdrawal.
AmountDetailsCashbackAmount	Integer		The amount of cash requested by the cardholder.
Approved	Boolean		Whether the authorization has been approved.
AuthorizationMethod	String		How the card details were provided.
BalanceTransactions	String		List of balance transactions associated with this authorization.
CardId	String		Unique identifier for the object.
CardObject	String		String representing the objects type. Objects of the same type share the same value.
CardBrand	String		The brand of the card.
CardCancellation_reason	String		The reason why the card was canceled.
CardCardholderId	String		Unique identifier for the object.
CardCardholderObject	String		String representing the objects type. Objects of the same type share the same value.
CardCardholderBillingAddressCity	String		City, district, suburb, town, or village.
CardCardholderBillingAddressCountry	String		Two-letter country code
CardCardholderBillingAddressLine1	String		Address line 1
CardCardholderBillingAddressLine2	String		Address line 2
CardCardholderBillingAddressPostalCode	String		ZIP or postal code.
CardCardholderBillingAddressState	String		State, county, province, or region.
CardCardholderCompanyTaxIdProvided	Boolean		Whether the companys business ID number was provided.
CardCardholderCreated	Datetime		Time at which the object was created. Measured in seconds since the Unix epoch.
CardCardholderEmail	String		The cardholders email address.
CardIssuingUserTermsAcceptanceDate	Datetime		The Unix timestamp marking when the cardholder accepted the Authorized User Terms.
CardIssuingUserTermsAcceptanceIP	String		The IP address from which the cardholder accepted the Authorized User Terms.
CardIssuingUserTermsAcceptanceUserAgent	String		The user agent of the browser from which the cardholder accepted the Authorized User Terms.
CardCardholderDOBDay	Integer		The day of birth, between 1 and 31.
CardCardholderDOBMonth	Integer		The month of birth, between 1 and 12.
CardCardholderDOBYear	Integer		The four-digit year of birth.
CardCardholderFirstName	String		The first name of this cardholder.
CardCardholderLastName	String		The last name of this cardholder.
CardCardholderVerficationDocBack	String		The back of a document returned by a file upload with a purpose value of identity_document.
CardCardholderVerficationDocFront	String		The front of a document returned by a file upload with a purpose value of identity_document.
CardCardholderLivemode	Boolean		Has the value true if the object exists in live mode or the value false if the object exists in test mode.
CardCardholderMetadataAggregate	String		The set of key/value pairs that you can attach to a an object.
CardCardholderName	String		The cardholders name. This will be printed on cards issued to them.
CardCardholderPhoneNumber	String		The cardholders phone number. This is required for all cardholders who will be creating EU cards.
CardCardholderPreferredLocales	String		The cardholders preferred locales (languages), ordered by preference.
CardCardholderRequirementsDisabledReason	String		If disabled_reason is present, all cards will decline authorizations with cardholder_verification_required reason.
CardCardholderRequirementsPastDue	String		Array of fields that need to be collected in order to verify and re-enable the cardholder.
CardCardholderSpendingControlsAllowedCategories	String		Array of strings containing categories of authorizations to allow.
CardCardholderSpendingControlsBlockedCategories	String		Array of strings containing categories of authorizations to decline.
CardCardholderSpendingControlsSpendingLimits	String		Limit spending with amount-based rules that apply across this cardholders cards.
CardCardholderSpendingControlsSpendingLimitsCurrency	String		Currency of the amounts within spending_limits.
CardCardholderStatus	String		Specifies whether to permit authorizations on this cardholder’s cards.
CardCardholderType	String		One of individual or company.
CardCreated	Datetime		Time at which the object was created. Measured in seconds since the Unix epoch.
CardCurrency	String		Three-letter ISO currency code, in lowercase.
CardCVC	String		The cards CVC. For security reasons, this is only available for virtual cards, and will be omitted unless you explicitly request it with the expand parameter.
CardExpMonth	Integer		The expiration month of the card.
CardExpYear	Integer		The expiration year of the card.
CardLast4	String		The last 4 digits of the card number.
CardLivemode	Boolean		Has the value true if the object exists in live mode or the value false if the object exists in test mode.
CardMetadataAggregate	String		The set of key/value pairs that you can attach to a an object.
CardNumber	String		The full unredacted card number.
CardReplacedBy	String		The latest card that replaces this card, if any.
CardReplacementFor	String		The card this card replaces, if any.
CardReplacementReason	String		The reason why the previous card needed to be replaced.
CardShipping	String		Where and how the card will be shipped.

AvailableBalance

Query the Available Balance in Stripe.

Table Specific Information

Select

Server-Side Query Support

The Sync App uses the Stripe API to filter the results by the following columns and operators while the rest of the filter is executed client-side within the Sync App.

AccountId support the following operator: =.

The following query retrieves all data from AvailableBalance view (The provider supports the use of all columns as criteria in the WHERE clause of SELECT statements, as long as the SupportEnhancedSQL property is set to True):

SELECT * FROM AvailableBalance

Columns


Name	Type	References	Description
Currency	String		The currency of the available balance.
Amount	Long		The available amount.
SourceTypesCard	Long		The source cards.
SourceTypesBankAccount	Long		Amount for bank account.
SourceTypesBitcoinReceiver	Long		Amount for Bitcoin Receiver.

Pseudo-Columns

SELECT ステートメントのWHERE 句では、疑似カラムフィールドを使用して、データソースから返されるタプルを詳細に制御することができます。


Name	Type	Description
AccountId	String		The Id of the connected account to get available balance for

BalanceChangeFromActivitySummaryReport

Query the Balance change from activity summary report in Stripe.

Table Specific Information

It is used to query the Balance change from activity summary report in Stripe.

Note: It requires a live-mode API key which we can set using the LiveAPIKey connection property. The view is not be visible without mentioning the LiveAPIKey.

Creating the Report

To create a report we need to pass some required parameters.

ParametersIntervalStart
ParametersIntervalEnd

To create a report we can also pass some optional parameters.

Id
ParametersColumns
ParametersCurrency

// This first creates the new Report and displays it. Report Creation takes time; once it is created it displays the report.
SELECT * FROM BalanceChangeFromActivitySummaryReport WHERE ParametersIntervalStart = '2020-12-27' AND ParametersIntervalEnd = '2020-12-28'

Select

To query the report we can try the below queries.

SELECT * FROM BalanceChangeFromActivitySummaryReport WHERE Id IN (SELECT Id FROM Reports WHERE report_type = 'balance_change_from_activity.summary.1')
SELECT * FROM BalanceChangeFromActivitySummaryReport WHERE Id IN ('frr_1I54dkATXQzBWNrlnaavpHGe', 'frr_1I3I59ATXQzBWNrl9VcczrDY')  // This shows multiple reports
SELECT * FROM BalanceChangeFromActivitySummaryReport WHERE Id = 'frr_1I480mATXQzBWNrlYQRaLQ9x' // This shows a respective report

Columns


Name	Type	References	Description
Reporting_Category	String		Reporting Category is a new categorization of balance transactions, meant to improve on the current type field.
Currency	String		Three-letter ISO code for the currency in which gross, fee and net are defined.
Count	Int		The number of transactions associated with the reporting_category.
Gross	Decimal		Sum of the gross amounts of the transactions associated with the reporting_category. Expressed in major units of the currency (e.g. dollars for USD, yen for JPY).
Fee	Decimal		Sum of the fees paid for the transactions associated with the reporting_category. Expressed in major units of the currency (e.g. dollars for USD, yen for JPY).
Net	Decimal		Sum of the net amounts for the transactions associated with the reporting_category. Expressed in major units of the currency (e.g. dollars for USD, yen for JPY).
Id [KEY]	String	Reports.Id	Unique identifier for the reports run object.
ParametersIntervalEnd	Datetime		Ending timestamp of data to be included in the report run (exclusive).
ParametersIntervalStart	Datetime		Starting timestamp of data to be included in the report run.
ParametersColumns	String		The set of output columns requested for inclusion in the report run.
ParametersCurrency	String		Currency of objects to be included in the report run.

BalanceSummaryReport

Query the Balance Summary report in Stripe.

Table Specific Information

It is used to query the Balance Summary report in Stripe.

Note: It requires a live-mode API key which we can set using the LiveAPIKey connection property. The view is not visible without mentioning the LiveAPIKey.

Creating the Report

To create a report we need to pass some required parameters.

ParametersIntervalStart
ParametersIntervalEnd

To create a report we can also pass some optional parameters.

Id
ParametersColumns
ParametersCurrency
ParametersTimezone

//  This first creates the new Report and displays it. Report Creation takes time once it is created will display the report.
SELECT * FROM BalanceSummaryReport WHERE ParametersIntervalStart = '2020-12-27' AND ParametersIntervalEnd = '2020-12-28'

Select

To query the report we can try the below queries.

SELECT * FROM BalanceSummaryReport WHERE Id IN (SELECT Id FROM Reports WHERE report_type = 'balance.summary.1')
SELECT * FROM BalanceSummaryReport WHERE Id IN ('frr_1I54dkATXQzBWNrlnaavpHGe', 'frr_1I3I59ATXQzBWNrl9VcczrDY') // This will show multiple reports
SELECT * FROM BalanceSummaryReport WHERE Id = 'frr_1I480mATXQzBWNrlYQRaLQ9x' // This will show a respective report

Columns


Name	Type	References	Description
Category	String		One of starting_balance, ending_balance, activity or payouts.
Description	String		One of Starting balance (YYYY-MM-DD) - the balance at the start of the period, Activity - the net amount of all transactions that affected your balance except for payouts, Less payouts - the amount of payouts to your bank account, or Ending balance (YYYY-MM-DD) - the balance left over at the end of the period after subtracting payouts from the Starting balance and Activity.
Net_Amount	Decimal		Net amount for the transactions associated with category. Expressed in major units of the currency (e.g. dollars for USD, yen for JPY).
Currency	String		Three-letter ISO code for the currency in which net_amount is defined.
Id [KEY]	String	Reports.Id	Unique identifier for the reports run object.
ParametersIntervalEnd	Datetime		Ending timestamp of data to be included in the report run (exclusive).
ParametersIntervalStart	Datetime		Starting timestamp of data to be included in the report run.
ParametersColumns	String		The set of output columns requested for inclusion in the report run.
ParametersCurrency	String		Currency of objects to be included in the report run.
ParametersTimezone	String		Defaults to Etc/UTC. The output timezone for all timestamps in the report.

BalanceTransactions

Query Balance History in Stripe.

Table Specific Information

Select

Server-Side Query Support

The Sync App uses the Stripe API to filter the results by the following columns and operators while the rest of the filter is executed client-side within the Sync App.

Id, Currency, Source, Type, Payout, and AccountId support the following operator: =.
Created support the following operators: >, >=, <, <=, =.

The following query gets all records from BalanceTransactions view (The provider supports the use of all columns as criteria in the WHERE clause of SELECT statements, as long as the SupportEnhancedSQL property is set to True):

SELECT * FROM BalanceTransactions

You can also filter balance transactions that were paid out on the specified payout ID.

SELECT * FROM BalanceTransactions WHERE Payout = '123'

Columns


Name	Type	References	Description
Id [KEY]	String		The Id of the balance transaction.
Amount	Integer		Gross amount of the transaction, in cents.
AvailableOn	Datetime		The date the net funds of the transaction will become available in the Stripe balance.
Created	Datetime		The datetime of creation.
Currency	String		The currency of the transaction.
Description	String		The transaction description.
Fee	Integer		Fees (in cents) paid for this transaction.
FeeDetailsAggregate	String		The fee details.
Net	Integer		Net amount of the transaction, in cents.
Source	String		The Stripe object this transaction is related to.
Status	String		If the net funds of the transaction are available in the Stripe balance yet. Either available or pending.
Type	String		Transaction type.
ReportingCategory	String		reporting categories can help you understand balance transactions from an accounting perspective.
ExchangeRate	Decimal		The exchange rate used, if applicable, for this transaction.

Pseudo-Columns

SELECT ステートメントのWHERE 句では、疑似カラムフィールドを使用して、データソースから返されるタプルを詳細に制御することができます。


Name	Type	Description
Transfer	String		For automatic Stripe transfers only, only returns transactions that were transferred out on the specified transfer Id.
Payout	String		For automatic Stripe payouts only, only returns transactions that were payed out on the specified payout ID.
AccountId	String		The Id of the connected account to get balance history for

Cardholders

Returns a list of Issuing Cardholder objects. The objects are sorted in descending order by creation date, with the most recently created object appearing first.

Table Specific Information

Select

Server-Side Query Support

The Sync App uses the Stripe API to filter the results by the following columns and operators while the rest of the filter is executed client-side within the Sync App.

Id support the following operator: =.
Created support the following operator: =.
Email support the following operator: =.
PhoneNumber support the following operator: =.
Status support the following operator: =.
Type support the following operator: =.

The provider supports the use of all columns as criteria in the WHERE clause of SELECT statements, as long as SupportEnhancedSQL is set to True. If SupportEnhancedSQL property is set to False, you still can retrieve:

To query the Cardholders we can try the below queries.

SELECT * from Cardholders where Id = 'ich_1OctV22eZvKYlo2C6ETSndgk'

SELECT * from Cardholders where Created = '2024-01-18 02:16:47.0'

Columns


Name	Type	References	Description
Id [KEY]	String		Unique identifier for the object.
BillingAddressCity	String		City, district, suburb, town, or village.
BillingAddressCountry	String		Two-letter country code
BillingAddressLine1	String		Address line 1
BillingAddressLine2	String		Address line 2
BillingAddressPostalCode	String		ZIP or postal code.
BillingAddressState	String		State, county, province, or region.
Email	String		The cardholders email address.
MetadataAggregate	String		The set of key/value pairs that you can attach to a an object.
Name	String		The cardholders name. This will be printed on cards issued to them.
IsCompanyTaxIdProvided	Boolean		The cardholders phone number.
Created	Datetime		Time at which the object was created. Measured in seconds since the Unix epoch.
Individual	String		Additional information about an individual cardholder.
Livemode	Boolean		Has the value true if the object exists in live mode or the value false if the object exists in test mode.
Object	String		String representing the objects type. Objects of the same type share the same value.
PhoneNumber	String		The cardholders phone number.
RequirementsDisabledReason	String		If disabled_reason is present, all cards will decline authorizations with cardholder_verification_required reason.
RequirementsPastDue	String		Array of fields that need to be collected in order to verify and re-enable the cardholder.
SpendingControlsAllowedCategories	String		Array of strings containing categories of authorizations to allow.
SpendingControlsBlockedCategories	String		Array of strings containing categories of authorizations to decline.
SpendingControlsSpendingLimits	String		Limit spending with amount-based rules that apply across this cardholders cards.
SpendingControlsSpendingLimitsCurrency	String		Currency of the amounts within spending_limits.
Status	String		Specifies whether to permit authorizations on this cardholders cards.
Type	String		One of individual or company.

CashBalance

Get the cash balance for the customer.

Table Specific Information

Select

The Sync App uses the Stripe API to filter the results by the following column and operator:

CustomerId supports the = operator.
AccountId supports the = operator.

The rest of the filter is executed client-side within the Sync App.

The provider supports the use of all columns as criteria in the WHERE clause of SELECT statements, as long as SupportEnhancedSQL is set to True. If SupportEnhancedSQL property is set to False, you still can retrieve:

SELECT * FROM CashBalance
SELECT * FROM CashBalance WHERE CustomerId = 'cus_qwew123'

Columns


Name	Type	References	Description
CustomerId [KEY]	String		The Id of the customer.
Available	String		A hash of all cash balances available to this customer.
Livemode	Boolean		true if the object is in live mode andfalse if in test mode.
object	String		String representing the object's type.
ReconciliationMode	String		The configuration for how funds that land in the customer cash balance are reconciled.
UsingMerchantDefault	Boolean		A flag to indicate if reconciliation mode returned is the user?s default or is specific to this customer cash balance.

Pseudo-Columns

SELECT ステートメントのWHERE 句では、疑似カラムフィールドを使用して、データソースから返されるタプルを詳細に制御することができます。


Name	Type	Description
AccountId	String		The Id of the connected account to get customer discounts for

CheckoutSessionLineItems

Returns a list of Checkout Sessions.

Table Specific Information

Select

Server-Side Query Support

The Sync App uses the Stripe API to filter the results by the following columns and operators while the rest of the filter is executed client-side within the Sync App.

CheckoutSessionId support the following operator: =.

The provider supports the use of all columns as criteria in the WHERE clause of SELECT statements, as long as SupportEnhancedSQL is set to True. If SupportEnhancedSQL property is set to False, you still can retrieve:

To query the CheckoutSessionLineItems we can try the below queries.

SELECT * from CheckoutSessionLineItems

SELECT * from CheckoutSessionLineItems where checkoutsessionid = 'cs_test_c1niqxjO1iwaT5asACq3TXhErRm3T7iuPV6AEbcP5ReTfutnEloisMpGol'

Columns


Name	Type	References	Description
Id [KEY]	String		The Id of the Checkout Session line item.
CheckoutSessionId	String		The Id of the Checkout Session
Object	String		String representing the objects type. Objects of the same type share the same value.
AmountDiscount	Integer		Total discount amount applied. If no discounts were applied, defaults to 0.
AmountTax	Integer		Total tax amount applied. If no tax was applied, defaults to 0.
AmountSubtotal	Integer		Total before any discounts or taxes are applied.
AmountTotal	Integer		Total after discounts and taxes.
Currency	String		Three-letter ISO currency code, in lowercase. Must be a supported currency.
Description	String		An arbitrary string attached to the object. Often useful for displaying to users. Defaults to product name.
Discounts	String		The discounts applied to the line item.
PriceId	String		Unique identifier for the object.
PriceObject	String		String representing the object’s type. Objects of the same type share the same value.
PriceActive	Boolean		Whether the price can be used for new purchases.
PriceBillingScheme	String		Describes how to compute the price per period.
PriceCreated	Datetime		Time at which the object was created. Measured in seconds since the Unix epoch.
PriceCurrency	String		Three-letter ISO currency code, in lowercase. Must be a supported currency.
PriceCustomUnitAmountMaximum	Integer		The maximum unit amount the customer can specify for this item.
PriceCustomUnitAmountMinimum	Integer		The minimum unit amount the customer can specify for this item.
PriceCustomUnitAmountPreset	Integer		The starting unit amount which can be updated by the customer.
PriceLiveMode	Boolean		Has the value true if the object exists in live mode or the value false if the object exists in test mode.
PriceLookupKey	String		A lookup key used to retrieve prices dynamically from a static string. This may be up to 200 characters.
PriceMetadata	String		Set of key-value pairs that you can attach to an object.
PriceNickName	String		A brief description of the price, hidden from customers.
PriceProduct	String		The ID of the product this price is associated with.
PriceRecurringAggregateUsage	String		Specifies a usage aggregation strategy for prices of usage_type=metered.
PriceRecurringInterval	String		The frequency at which a subscription is billed.
PriceRecurringIntervalCount	Integer		The number of intervals
PriceRecurringUsageType	String		Configures how the quantity per period should be determined
PriceTaxBehaviour	String		Only required if a default tax behavior was not provided in the Stripe Tax settings.
PriceTiers	String		Each element represents a pricing tier.
PriceTiersMode	String		Defines if the tiering price should be graduated or volume based.
PriceTransformQuantityDivideBy	Integer		Divide usage by this number.
PriceTransformQuantityRound	String		After division, either round the result up or down.
PriceType	String		One of one_time or recurring depending on whether the price is for a one-time purchase or a recurring (subscription) purchase.
PriceUnitAmount	Integer		The unit amount in cents to be charged, represented as a whole integer if possible.
PriceUnitAmountDecimal	String		The unit amount in cents to be charged, represented as a decimal string with at most 12 decimal places.
Quantity	String		The quantity of products being purchased.
Taxes	String		The taxes applied to the line item.

CountrySpecs

Query the available Country Specs in Stripe.

Table Specific Information

Country Specs can be used when an Account is created.

Select

Server-Side Query Support

The Sync App uses the Stripe API to filter the results by the following columns and operators while the rest of the filter is executed client-side within the Sync App.

Id supports the following operator: =.
AccountId supports the following operator: =.

The provider supports the use of all columns as criteria in the WHERE clause of SELECT statements, as long as SupportEnhancedSQL is set to True. If SupportEnhancedSQL property is set to False, you still can retrieve a Country Spec by specifying its Id:

SELECT * FROM CountrySpecs WHERE Id = 'MyCountrySpecsId'

Columns


Name	Type	References	Description
Id [KEY]	String		The ISO Country code for this country.
SupportedBankAccountCurrenciesAggregate	String		Currencies that can be accepted in the specific country.
SupportedPaymentCurrenciesAggregate	String		Currencies that can be accepted in the specified country.
SupportedPaymentMethodsAggregate	String		Payment methods available in the specified country. You will need to enable BitCoin and ACH payments on your account for those methods to appear in this list.
VerificationFieldsAggregate	String		Lists the types of verification data needed to keep an account open. Includes 'minimum' fields, which every account must eventually provide, as well as additional fields, which are only required for some merchants.
SupportedTransferCurrenciesAggregate	String		Countries that can accept transfers from the specified country.
DefaultCurrency	String		The default currency for this country.

Pseudo-Columns

SELECT ステートメントのWHERE 句では、疑似カラムフィールドを使用して、データソースから返されるタプルを詳細に制御することができます。


Name	Type	Description
AccountId	String		The Id of the connected account to get country specs for

CustomerBalanceTransactions

Returns a list of transactions that updated the customers balances.

Table Specific Information

Select

Server-Side Query Support

The Sync App uses the Stripe API to filter the results by the following columns and operators while the rest of the filter is executed client-side within the Sync App.

Id support the following operator: =.
CustomerIdId support the following operator: =.

The provider supports the use of all columns as criteria in the WHERE clause of SELECT statements, as long as SupportEnhancedSQL is set to True. If SupportEnhancedSQL property is set to False, you still can retrieve:

To query the CustomerBalanceTransactions we can try the below queries.

SELECT * from CustomerBalanceTransactions where  Id = 'cbtxn_1OduT9SC4snQ4WkOY0nOBfpk'

SELECT * from CustomerBalanceTransactions where  CustomerId = 'cbtxn_1OduT9SC4snQ4WkOY0nOBfpk'

Columns


Name	Type	References	Description
Id [KEY]	String		Unique identifier for the object.
CustomerId [KEY]	String		The ID of the customer the transaction belongs to.
Amount	Integer		The amount of the transaction.
Currency	String		Three-letter ISO currency code, in lowercase. Must be a supported currency.
Created	Datetime		Time at which the object was created. Measured in seconds since the Unix epoch.
Description	String		An arbitrary string attached to the object. Often useful for displaying to users.
EndingBalance	Integer		The customer’s balance after the transaction was applied.
Type	String		Transaction type
CreditNote	String		The ID of the credit note (if any) related to the transaction.
Invoice	String		The ID of the invoice (if any) related to the transaction.
Livemode	Boolean		Has the value true if the object exists in live mode or the value false if the object exists in test mode.
MetadataAggregate	String		The set of key/value pairs that you can attach to a an object.
Object	String

CustomerSubscriptions

Get the available subscriptions of a Customer.

Table Specific Information

Select

Server-Side Query Support

The Sync App uses the Stripe API to filter the results by the following columns and operators while the rest of the filter is executed client-side within the Sync App.

AccountId support the following operators: =.

The provider supports the use of all columns as criteria in the WHERE clause of SELECT statements, as long as the SupportEnhancedSQL property is set to True. If the SupportEnhancedSQL property is set to False, you still can query all Customer Subscriptions:

SELECT * FROM CustomerSubscriptions

Columns


Name	Type	References	Description
Id [KEY]	String		The Id of the Subscription object.
CustomerId	String	Customers.Id	The Id of the customer.
PlanId	String	Plans.Id	The Id of the plan.
ApplicationFeePercent	Decimal		A positive decimal that represents the fee percentage of the subscription invoice amount that will be transferred to the application of the Stripe account owner each billing period.
AutomaticTaxEnabled	Boolean		Automatic tax settings for this subscription.
BillingCycleAnchor	Datetime		Determines the date of the first full invoice, and, for plans with month or year intervals, the day of the month for subsequent invoices.
BillingThreshold	String		Define thresholds at which an invoice will be sent, and the subscription advanced to a new billing period
CanceledAt	Datetime		If the subscription has been canceled, the date of that cancellation. If the subscription was canceled with cancel_at_period_end, canceled_at will still reflect the date of the initial cancellation request, not the end of the subscription period when the subscription is automatically moved to a canceled state.
CurrentPeriodEnd	Datetime		End of the current period that the subscription has been invoiced for. At the end of this period, a new invoice will be created.
CurrentPeriodStart	Datetime		Start of the current period that the subscription has been invoiced for.
Currency	String		Three-letter ISO currency code, in lowercase. Must be a supported currency.
Description	String		The subscription's description.
DaysUntilDue	Integer		Number of days a customer has to pay invoices generated by this subscription. This value is null for subscriptions where collection_method=charge_automatically
DefaultSource	String		Id of the default payment source for the subscription.
DefaultTaxRates	String		The tax rates that will apply to any subscription item that does not have tax_rates set. Invoices created will have their default_tax_rates populated from the subscription.
EndedAt	Datetime		If the subscription has ended (either because it was canceled or because the customer was switched to a subscription to a new plan), the date the subscription ended.
Quantity	Double		The quantity of the plan to which the customer should be subscribed. For example, if your plan is $10/user/month, and your customer has 5 users, you could pass 5 as the quantity to have the customer charged $50 (5 x $10) monthly.
Schedule	String		The schedule attached to the subscription
TestClock	String		Id of the test clock this customer belongs to.
TransferData	String		The account (if any) the subscription's payments will be attributed to for tax reporting, and where funds from each payment will be transferred to for each of the subscription's invoices.
MetadataAggregate	String		The set of key/value pairs that you can attach to a subscription object.
LiveMode	Boolean		Has the value true if the object exists in live mode or the value false if the object exists in test mode.
LatestInvoice	String		Three-letter ISO currency code, in lowercase. Must be a supported currency.
NextPendingInvoiceItemInvoice	Datetime		Specifies the approximate timestamp on which any pending invoice items will be billed according to the schedule provided at pending_invoice_item_interval
PauseCollection	String		If specified, payment collection for this subscription will be paused.
PaymentSettings	String		Payment settings passed on to invoices created by the subscription.
PendingSetupIntent	String		You can use this SetupIntent to collect user authentication when creating a subscription without immediate payment or updating a subscription's payment method, allowing you to optimize for off-session payments.
PendingUpdate	String		If specified, pending updates that will be applied to the subscription once the latest_invoice has been paid.

Pseudo-Columns

SELECT ステートメントのWHERE 句では、疑似カラムフィールドを使用して、データソースから返されるタプルを詳細に制御することができます。


Name	Type	Description
AccountId	String		The Id of the connected account to get customer discounts for

EarlyFraudWarning

Query an early fraud reported by the customer.

Table Specific Information

Select

The Sync App uses the Stripe API to filter the results by the following columns and operators:

Id supports the following operator: =.
ChargeId supports the following operator: =.
Created supports the following operator: =,>,<,>=,<=.
PaymentIntent supports the following operator: =.
AccountId supports the following operator: =.

The rest of the filter is executed client-side within the Sync App.

The provider supports the use of all columns as criteria in the WHERE clause of SELECT statements, as long as SupportEnhancedSQL is set to True. If SupportEnhancedSQL property is set to False, you still can retrieve:

SELECT * FROM EarlyFraudWarning
SELECT * FROM EarlyFraudWarning WHERE Id = '123321'
SELECT * FROM EarlyFraudWarning WHERE ChargeId = 'ch_3NASvLJSsh'

Columns


Name	Type	References	Description
Id [KEY]	String		The Id of fraud warning.
Actionable	Boolean		An EFW is actionable if it has not received a dispute and has not been fully refunded.
ChargeId	String		The Id of the charge.
Created	Datetime		Time at which the object was created. Measured in seconds since the Unix epoch.
FraudType	String		The type of fraud labelled by the issuer. Supported values are card_never_received, fraudulent_card_application, made_with_counterfeit_card, made_with_lost_card, made_with_stolen_card, misc, and unauthorized_use_of_card.
Livemode	Boolean		true if the object is in live mode andfalse if in test mode.
PaymentIntentId	String		The Id of the Payment Intent.

Pseudo-Columns

SELECT ステートメントのWHERE 句では、疑似カラムフィールドを使用して、データソースから返されるタプルを詳細に制御することができます。


Name	Type	Description
AccountId	String		The Id of the connected account to get fraud warning for.

EndingBalanceReconciliationSummaryReport

Query the Ending balance reconciliation summary report in Stripe.

Table Specific Information

It is used to query the Ending balance reconciliation summary report in Stripe.

Note: It requires a live-mode API key which we can set using the LiveAPIKey connection property. The view is not visible without mentioning the LiveAPIKey.

Creating the Report

To create a report we need to pass some required parameters.

ParametersIntervalEnd

To create a report we can also pass some optional parameters.

Id
ParametersColumns
ParametersCurrency

//  This first creates the new Report and displays it. Report Creation takes time once it is created will display the report.
SELECT * FROM EndingBalanceReconciliationSummaryReport WHERE ParametersIntervalEnd = '2020-12-28'

Select

To query the report we can try the below queries.

SELECT * FROM EndingBalanceReconciliationSummaryReport WHERE Id IN (SELECT Id FROM Reports WHERE report_type = 'ending_balance_reconciliation.summary.1')
SELECT * FROM EndingBalanceReconciliationSummaryReport WHERE Id IN ('frr_1I54dkATXQzBWNrlnaavpHGe', 'frr_1I3I59ATXQzBWNrl9VcczrDY') // This will show multiple reports
SELECT * FROM EndingBalanceReconciliationSummaryReport WHERE Id = 'frr_1I480mATXQzBWNrlYQRaLQ9x' // This will show a respective report

Columns


Name	Type	References	Description
Reporting_Category	String		Reporting Category is a new categorization of balance transactions, meant to improve on the current type field.
Currency	String		Three-letter ISO code for the currency in which gross, fee and net are defined.
Count	Int		The number of transactions associated with the reporting_category.
Gross	Decimal		Sum of the gross amounts of the transactions associated with the reporting_category. Expressed in major units of the currency (e.g. dollars for USD, yen for JPY).
Fee	Decimal		Sum of the fees paid for the transactions associated with the reporting_category. Expressed in major units of the currency (e.g. dollars for USD, yen for JPY).
Net	Decimal		Sum of the net amounts for the transactions associated with the reporting_category. Expressed in major units of the currency (e.g. dollars for USD, yen for JPY).
Id [KEY]	String	Reports.Id	Unique identifier for the reports run object.
ParametersIntervalEnd	Datetime		Ending timestamp of data to be included in the report run (exclusive).
ParametersColumns	String		The set of output columns requested for inclusion in the report run.
ParametersCurrency	String		Currency of objects to be included in the report run.

EndingBalanceReconciliationSummaryReportInternal

Query the Ending balance reconciliation summary report in Stripe.

Columns


Name	Type	References	Description
Reporting_Category	String		Reporting Category is a new categorization of balance transactions, meant to improve on the current type field.
Currency	String		Three-letter ISO code for the currency in which gross, fee and net are defined.
Count	Int		The number of transactions associated with the reporting_category.
Gross	Decimal		Sum of the gross amounts of the transactions associated with the reporting_category. Expressed in major units of the currency (e.g. dollars for USD, yen for JPY).
Fee	Decimal		Sum of the fees paid for the transactions associated with the reporting_category. Expressed in major units of the currency (e.g. dollars for USD, yen for JPY).
Net	Decimal		Sum of the net amounts for the transactions associated with the reporting_category. Expressed in major units of the currency (e.g. dollars for USD, yen for JPY).
Id [KEY]	String	Reports.Id	Unique identifier for the reports run object.
ParametersIntervalEnd	Datetime		Ending timestamp of data to be included in the report run (exclusive).
ParametersColumns	String		The set of output columns requested for inclusion in the report run.
ParametersCurrency	String		Currency of objects to be included in the report run.

Events

Query the available events in Stripe.

Table Specific Information

Select

Server-Side Query Support

The Sync App uses the Stripe API to filter the results by the following columns and operators while the rest of the filter is executed client-side within the Sync App.

Id, Type and AccountId support the following operators: =.
Created support the following operators: <,>>=,<,<=,=.

The provider supports the use of all columns as criteria in the WHERE clause of SELECT statements, as long as SupportEnhancedSQL is set to True. If SupportEnhancedSQL property is set to False, you still can retrieve:

-an Event by specifying its Id:

SELECT * FROM Events WHERE Id = 'dp_12345678'

-Events that happened after a specific date (Created may be used with the >, >=, <, <=, or = conditions and may be used twice to specify a range):

SELECT * FROM Events WHERE Created > '2016-01-03'

Columns


Name	Type	References	Description
Id [KEY]	String		The Id of the event.
ApiVersion	String		The Stripe API version used to render data.
Created	Datetime		The datetime event was created.
ObjectId	String		The event Id.
ObjectName	String		The object name for which event occured.
Livemode	Boolean		Tells if the event is in livemode.
PendingWebhooks	Integer		The number of webhooks yet to be delivered successfully (return a 20x response) to the URLs you've specified.
Request	String		The Id of the API request that caused the event.
Type	String		The description of the event.
Description	String		An arbitrary string attached to the object. Often useful for displaying to users.The description field on invoice line items has a maximum character length limit of 500
PreviousAttributes	String		Object containing the names of the attributes that have changed.

Pseudo-Columns

SELECT ステートメントのWHERE 句では、疑似カラムフィールドを使用して、データソースから返されるタプルを詳細に制御することができます。


Name	Type	Description
AccountId	String		The Id of the connected account to get events for.

FileLinks

Returns a list of file links.

Table Specific Information

Select

Server-Side Query Support

The Sync App uses the Stripe API to filter the results by the following columns and operators while the rest of the filter is executed client-side within the Sync App.

Id support the following operator: =.
File support the following operator: =.
Expired support the following operator: =.

The provider supports the use of all columns as criteria in the WHERE clause of SELECT statements, as long as SupportEnhancedSQL is set to True. If SupportEnhancedSQL property is set to False, you still can retrieve:

To query the FileLinks we can try the below queries.

SELECT * from FileLinks

SELECT * from FileLinks where Expired = false

Columns


Name	Type	References	Description
Id [KEY]	String		The id of files.
Created	Datetime		Time at which the object was created. Measured in seconds since the Unix epoch.
ExpiresAt	Datetime		The time at which the file expires and is no longer available in epoch seconds.
Expired	Boolean		Returns true if the link is already expired.
File	String		The file object this link points to.
MetadataAggregate	String		The set of key/value pairs that you can attach to a an object.
Url	String		The URL from which the file can be downloaded using your live secret API key.
Livemode	Boolean		Has the value true if the object exists in live mode or the value false if the object exists in test mode.

Pseudo-Columns

SELECT ステートメントのWHERE 句では、疑似カラムフィールドを使用して、データソースから返されるタプルを詳細に制御することができます。


Name	Type	Description
AccountId	String		The Id of the connected account to get files for.

Files

Retrieves a file hosted on Stripe's servers.

Table Specific Information

Select

The Sync App uses the Stripe API to filter the results by the following columns and operators:

Id supports the following operator: =.
Purpose supports the following operator: =.
Created supports the following operators: >,>=,<,<=,=.
AccountId supports the following operator: =.

The rest of the filter is executed client-side within the Sync App.

The provider supports the use of all columns as criteria in the WHERE clause of SELECT statements, as long as SupportEnhancedSQL is set to True. If SupportEnhancedSQL property is set to False, you still can retrieve:

SELECT * FROM Files
SELECT * FROM Files WHERE Id = '123321'
SELECT * FROM Files WHERE Purpose = 'dispute_evidence'
SELECT * FROM Files WHERE Created >= '2023-07-14T05:36:46.000-04:00'

Columns


Name	Type	References	Description
Id [KEY]	String		The id of files.
Created	Datetime		Time at which the object was created. Measured in seconds since the Unix epoch.
ExpiresAt	Datetime		The time at which the file expires and is no longer available in epoch seconds.
Filename	String		A filename for the file, suitable for saving to a filesystem.
Links	String		A list of file links that point at this file.
Purpose	String		The purpose of the uploaded file.
Size	Integer		The size in bytes of the file object.
Title	String		A user friendly title for the document.
Type	String		The type of the file returned (e.g., csv, pdf, jpg, or png).
Url	String		The URL from which the file can be downloaded using your live secret API key.

Pseudo-Columns

SELECT ステートメントのWHERE 句では、疑似カラムフィールドを使用して、データソースから返されるタプルを詳細に制御することができます。


Name	Type	Description
AccountId	String		The Id of the connected account to get files for.

InvoiceDiscounts

Get the available discounts of invoices in Stripe.

Table Specific Information

Select

The provider supports the use of all columns as criteria in the WHERE clause of SELECT statements, as long as the SupportEnhancedSQL property is set to True. If the SupportEnhancedSQL property is set to False, you still can retrieve the Invoice Discount list:

SELECT * FROM InvoiceDiscounts

Columns


Name	Type	References	Description
Id [KEY]	String		The Id of the discount object.
InvoiceId	String	Invoices.Id	The Id of the Invoice, which the discount is attached to.
Customer	String		The Id of the Customer.
Start	Datetime		Date that the coupon was applied.
End	Datetime		If the coupon has a duration of repeating, the date that this discount will end. If the coupon has a duration of once or forever, this attribute will be null.
Coupon	String		The Id of the coupon.
CouponAmountOff	Integer		Amount (in the currency specified) that is taken off the subtotal of any invoices for this customer.
CouponCurrency	String		If amount_off has been set, the three-letter ISO code for the currency of the amount to take off.
CouponName	String		Name of the coupon displayed to customers on, for instance, invoices or receipts.
CouponCreatedAt	Datetime		The creation date.
CouponDuration	String		Describes how long a customer who applies this coupon will get the discount. One of forever, once, and repeating.
CouponDurationInMonths	Integer		If duration is repeating, the number of months the coupon applies. Null if coupon duration is forever or once.
CouponPercentOff	Decimal		Percent that will be taken off the subtotal of any invoices for this customer for the duration of the coupon. For example, a coupon with a percent_off of 50 will make a $100 invoice $50 instead.
CouponRedeemBy	Datetime		Date after which the coupon can no longer be redeemed.
CouponTimesRedeemed	Integer		Number of times this coupon has been applied to a customer.
CouponValid	Boolean		Taking account of the above properties, whether this coupon can still be applied to a customer.
CouponMaxRedemptions	Integer		Maximum number of times this coupon can be redeemed, in total, across all customers, before it is no longer valid.
PromotionCode	String		The promotion code applied to create this discount.
Subscription	String		The subscription that this coupon is applied to, if it is applied to a particular subscription.

Pseudo-Columns

SELECT ステートメントのWHERE 句では、疑似カラムフィールドを使用して、データソースから返されるタプルを詳細に制御することができます。


Name	Type	Description
AccountId	String		The Id of the connected account to get invoices for

InvoiceItemDiscounts

Get the available discounts from invoices items in Stripe.

Table Specific Information

Select

The provider supports the use of all columns as criteria in the WHERE clause of SELECT statements, as long as the SupportEnhancedSQL property is set to True. If the SupportEnhancedSQL property is set to False, you still can retrieve the Invoice Items Discount list:

SELECT * FROM InvoiceItemDiscounts

Columns


Name	Type	References	Description
Id [KEY]	String		The Id of the discount object.
InvoiceItemId	String	InvoiceItems.Id	The Id of the Invoice item, which the discount is attached to.
Customer	String		The Id of the Customer.
Start	Datetime		Date that the coupon was applied.
End	Datetime		If the coupon has a duration of repeating, the date that this discount will end. If the coupon has a duration of once or forever, this attribute will be null.
Coupon	String		The Id of the coupon.
CouponAmountOff	Integer		Amount (in the currency specified) that is taken off the subtotal of any invoices for this customer.
CouponCurrency	String		If amount_off has been set, the three-letter ISO code for the currency of the amount to take off.
CouponName	String		Name of the coupon displayed to customers on, for instance, invoices or receipts.
CouponCreatedAt	Datetime		The creation date.
CouponDuration	String		Describes how long a customer who applies this coupon will get the discount. One of forever, once, and repeating.
CouponDurationInMonths	Integer		If duration is repeating, the number of months the coupon applies. Null if coupon duration is forever or once.
CouponPercentOff	Decimal		Percent that will be taken off the subtotal of any invoices for this customer for the duration of the coupon. For example, a coupon with a percent_off of 50 will make a $100 invoice $50 instead.
CouponRedeemBy	Datetime		Date after which the coupon can no longer be redeemed.
CouponTimesRedeemed	Integer		Number of times this coupon has been applied to a customer.
CouponValid	Boolean		Taking account of the above properties, whether this coupon can still be applied to a customer.
CouponMaxRedemptions	Integer		Maximum number of times this coupon can be redeemed, in total, across all customers, before it is no longer valid.
PromotionCode	String		The promotion code applied to create this discount.
Subscription	String		The subscription that this coupon is applied to, if it is applied to a particular subscription.

Pseudo-Columns

SELECT ステートメントのWHERE 句では、疑似カラムフィールドを使用して、データソースから返されるタプルを詳細に制御することができます。


Name	Type	Description
AccountId	String		The Id of the connected account to get invoices for.

InvoiceLineItemDiscounts

Get the available discounts from invoices line items in Stripe.

Table Specific Information

Select

Server-Side Query Support

The Sync App uses the Stripe API to filter the results by the following columns and operators while the rest of the filter is executed client-side within the Sync App.

InvoiceId supports the following operator: =.
AccountId supports the following operator: =.

The provider supports the use of all columns as criteria in the WHERE clause of SELECT statements, as long as the SupportEnhancedSQL property is set to True. If the SupportEnhancedSQL property is set to False, you still can retrieve:

-Invoice Line Items Discount list:

SELECT * FROM InvoiceLineItemDiscounts WHERE InvoiceId='in_1MRUu5SC4snQ4WkOvjaIxRGJ'

Columns


Name	Type	References	Description
Id [KEY]	String		The Id of the discount object.
InvoiceId	String		The Id of the invoice.
CustomerId	String		The Id of the customer.
Start	Datetime		Date that the coupon was applied.
End	Datetime		If the coupon has a duration of repeating, the date that this discount will end. If the coupon has a duration of once or forever, this attribute will be null.
CouponId	String		The Id of the coupon.
CouponAmountOff	Integer		Amount (in the currency specified) that is taken off the subtotal of any invoices for this customer.
CouponCurrency	String		If amount_off has been set, the three-letter ISO code for the currency of the amount to take off.
CouponName	String		Name of the coupon displayed to customers on, for instance, invoices or receipts.
CouponCreatedAt	Datetime		The creation date.
CouponDuration	String		Describes how long a customer who applies this coupon will get the discount. One of forever, once, and repeating.
CouponDurationInMonths	Integer		If duration is repeating, the number of months the coupon applies. Null if coupon duration is forever or once.
CouponPercentOff	Decimal		Percent that will be taken off the subtotal of any invoices for this customer for the duration of the coupon. For example, a coupon with a percent_off of 50 will make a $100 invoice $50 instead.
CouponRedeemBy	Datetime		Date after which the coupon can no longer be redeemed.
CouponTimesRedeemed	Integer		Number of times this coupon has been applied to a customer.
CouponValid	Boolean		Taking account of the above properties, whether this coupon can still be applied to a customer.
CouponMaxRedemptions	Integer		Maximum number of times this coupon can be redeemed, in total, across all customers, before it is no longer valid.
PromotionCode	String		The promotion code applied to create this discount.
Subscription	String		The subscription that this coupon is applied to, if it is applied to a particular subscription.

Pseudo-Columns

SELECT ステートメントのWHERE 句では、疑似カラムフィールドを使用して、データソースから返されるタプルを詳細に制御することができます。


Name	Type	Description
AccountId	String		The Id of the connected account to get invoices for.

InvoiceLineItems

Query the available invoices line items in Stripe.

Table Specific Information

Select

Server-Side Query Support

The Sync App uses the Stripe API to filter the results by the following columns and operators while the rest of the filter is executed client-side within the Sync App.

InvoiceId support the following operator: =.
AccountId support the following operator: =.

The provider supports the use of all columns as criteria in the WHERE clause of SELECT statements, as long as SupportEnhancedSQL is set to True. If SupportEnhancedSQL property is set to False, you still can retrieve:

-an InvoiceLineItems by specifying its InvoiceId:

SELECT * FROM InvoiceLineItems WHERE InvoiceId = 'in_123456'

Columns


Name	Type	References	Description
Id [KEY]	String		Unique identifier for the object.
InvoiceId	String		The Id of the invoice.
Amount	Integer		The amount, in cents.
AmountExcludingTax	Integer		The integer amount in cents representing the amount for this line item, excluding all tax and discounts.
Currency	String		Three-letter ISO currency code, in lowercase. Must be a supported currency.
Description	String		An arbitrary string attached to the object. Often useful for displaying to users.
Discountable	Boolean		If true, discounts will apply to this line item. Always false for prorations.
InvoiceItem	String		The Id of the invoice item associated with this line item if any.
LiveMode	Boolean		Has the value true if the object exists in live mode or the value false if the object exists in test mode.
Metadata	String		The metadata object.
Object	String		String representing the object's type. Objects of the same type share the same value.
PeriodEnd	Datetime		The end of the period, which must be greater than or equal to the start.
PeriodStart	Datetime		The start of the period.
PriceId	String		Unique identifier for the price.
PriceObject	String		String representing the object's type. Objects of the same type share the same value.
PriceActive	Boolean		Whether the price can be used for new purchases.
PriceBillingScheme	String		Describes how to compute the price per period.
PriceCreated	Datetime		Time at which the object was created. Measured in seconds since the Unix epoch.
PriceCurrency	String		Three-letter ISO currency code, in lowercase. Must be a supported currency.
PriceCustomUnitAmount	String		When set, provides configuration for the amount to be adjusted by the customer during Checkout Sessions and Payment Links.
PriceLiveMode	Boolean		Has the value true if the object exists in live mode or the value false if the object exists in test mode.
PriceLookupKey	String		A lookup key used to retrieve prices dynamically from a static string. This may be up to 200 characters.
PriceMetadata	String		Set of key-value pairs that you can attach to an object. This can be useful for storing additional information about the object in a structured format.
PriceNickname	String		A brief description of the price, hidden from customers.
PriceProduct	String		The Id of the product this price is associated with.
PriceRecurring	String		The recurring components of a price such as interval and usage_type.
PriceTaxBehavior	String		Specifies whether the price is considered inclusive of taxes or exclusive of taxes. One of inclusive, exclusive, or unspecified. Once specified as either inclusive or exclusive, it cannot be changed.
PriceTiersMode	String		Defines if the tiering price should be graduated or volume based. In volume-based tiering, the maximum quantity within a period determines the per unit price. In graduated tiering, pricing can change as the quantity grows.
PriceTransformQuantity	String		Apply a transformation to the reported usage or set quantity before computing the amount billed. Cannot be combined with tiers.
PriceType	String		One of one_time or recurring depending on whether the price is for a one-time purchase or a recurring (subscription) purchase.
PriceUnitAmount	Integer		The unit amount in cents to be charged, represented as a whole integer if possible. Only set if billing_scheme=per_unit.
PriceUnitAmountDecimal	Float		The unit amount in cents to be charged, represented as a decimal string with at most 12 decimal places. Only set if billing_scheme=per_unit.
Proration	Boolean		Whether this is a proration.
ProrationDetails	String		Additional details for proration line items.
Quantity	Integer		The quantity of the subscription, if the line item is a subscription or a proration.
Subscription	String		The subscription that the invoice item pertains to, if any.
SubscriptionItems	String		The subscription item that generated this invoice item. Left empty if the line item is not an explicit result of a subscription.
Type	String		A string identifying the type of the source of this line item, either an invoiceitem or a subscription.
UnitAmountExcludingTax	String		The amount in cents representing the unit amount for this line item, excluding all tax and discounts.
DiscountAmountsAggregate	String		The amount of discount calculated per discount for this line item.
TaxAmountsAggregate	String		The amount of tax calculated per tax rate for this line item.
TaxRatesAggregate	String		The tax rates which apply to the line item.
DiscountsAggregate	String		The discounts which apply to the invoice item.

Pseudo-Columns

SELECT ステートメントのWHERE 句では、疑似カラムフィールドを使用して、データソースから返されるタプルを詳細に制御することができます。


Name	Type	Description
AccountId	String		The Id of the connected account to get invoice line items for.

IssuingCards

Returns a list of Issuing Card objects.

Table Specific Information

Select

Server-Side Query Support

The Sync App uses the Stripe API to filter the results by the following columns and operators while the rest of the filter is executed client-side within the Sync App.

Id support the following operator: =.
Cardholder support the following operator: =.
Type support the following operator: =.
Created support the following operator: =.
ExpMonth support the following operator: =.
ExpYear support the following operator: =.
Last4 support the following operator: =.
Status support the following operator: =.

The provider supports the use of all columns as criteria in the WHERE clause of SELECT statements, as long as SupportEnhancedSQL is set to True. If SupportEnhancedSQL property is set to False, you still can retrieve:

To query the IssuingCards we can try the below queries.

SELECT * FROM IssuingCards

SELECT * from IssuingCards where id = 'ic_1Mwg8K2eZvKYlo2C90clp5gj'

SELECT * from IssuingCards where Last4 = '0921'

Columns


Name	Type	References	Description
Id [KEY]	String		The id of files.
CancellationReason	String		The reason why the card was canceled.
Currency	String		Three-letter ISO currency code, in lowercase. Must be a supported currency.
Created	Datetime		Time at which the object was created. Measured in seconds since the Unix epoch.
CardholderId	String		Unique identifier for the object.
CardholderObject	String		String representing the objects type. Objects of the same type share the same value.
CardholderBillingAddress	String		The cardholders billing address.
CardholderIsCompanyTaxIdProvided	Boolean		Whether the companys business ID number was provided.
CardholderCreated	Datetime		Time at which the object was created. Measured in seconds since the Unix epoch.
CardholderEmail	String		The cardholders email address.
CardholderIndividual	String		Additional information about an individual cardholder.
CardholderName	String		The cardholders name. This will be printed on cards issued to them.
CardholderPhoneNumber	String		The cardholders phone number. This is required for all cardholders who will be creating EU cards. See the 3D Secure documentation for more details.
CardholderPreferredLocales	String		The cardholders preferred locales (languages), ordered by preference.
CardholderRequirementsDisabledReason	String		If disabled_reason is present, all cards will decline authorizations with cardholder_verification_required reason.
CardholderRequirementsPastDue	String		Array of fields that need to be collected in order to verify and re-enable the cardholder.
CardholderSpendingControlsAllowedCategories	String		Array of strings containing categories of authorizations to allow. All other categories will be blocked. Cannot be set with blocked_categories.
CardholderSpendingControlsBlockedCategories	String		Array of strings containing categories of authorizations to decline. All other categories will be allowed. Cannot be set with allowed_categories.
CardholderSpendingControlsSpendingLimits	String		Limit spending with amount-based rules that apply across this cardholders cards.
CardholderSpendingControlsSpendingLimitsCurrency	String		Currency of the amounts within spending_limits.
CardholderStatus	String		Specifies whether to permit authorizations on this cardholders cards.
CardholderType	String		One of individual or company. See Choose a cardholder type for more details.
ExpMonth	Integer		The expiration month of the card.
ExpYear	Integer		The expiration year of the card.
Last4	String		The last 4 digits of the card number.
MetadataAggregate	String		The set of key/value pairs that you can attach to a an object.
Status	String		Whether authorizations can be approved on this card. May be blocked from activating cards depending on past-due Cardholder requirements. Defaults to inactive.
Type	String		The type of the card.
Object	String		String representing the objects type. Objects of the same type share the same value.
Brand	String		The brand of the card.
CVC	String		The cards CVC. For security reasons, this is only available for virtual cards.
Livemode	Boolean		Has the value true if the object exists in live mode or the value false if the object exists in test mode.
Number	String		The full unredacted card number.
ReplacedBy	String		The latest card that replaces this card, if any.
ReplacementFor	String		The card this card replaces, if any.
ReplacementReason	String		The reason why the previous card needed to be replaced.
ShippingAddress	String		Shipping address.
ShippingCarrier	String		The delivery company that shipped a card.
ShippingCustoms	String		Additional information that may be required for clearing customs.
ShippingETA	String		A unix timestamp representing a best estimate of when the card will be delivered.
ShippingName	String		Recipient name.
ShippingPhoneNumber	String		The phone number of the receiver of the shipment
ShippingRequireSignature	Boolean		Whether a signature is required for card delivery.
ShippingService	String		Shipment service, such as standard or express.
ShippingStatus	String		The delivery status of the card.
ShippingTrackingNumber	String		A tracking number for a card shipment.
ShippingTrackingURL	String		A link to the shipping carriers site where you can view detailed information about a card shipment.
ShippingType	String		Packaging options.
SpendingControlsAllowedCategories	String
SpendingControlsBlockedCategories	String
SpendingControlsSpendingLimits	String
SpendingControlsSpendingLimitsCurrency	String
WalletsApplePay	String
WalletsGooglePay	String
WalletsPrimaryAccountIdentifier	String

Pseudo-Columns

SELECT ステートメントのWHERE 句では、疑似カラムフィールドを使用して、データソースから返されるタプルを詳細に制御することができます。


Name	Type	Description
AccountId	String		The Id of the connected account to get files for.

IssuingDisputes

Returns a list of Issuing Dispute objects.

Table Specific Information

Select

Server-Side Query Support

The Sync App uses the Stripe API to filter the results by the following columns and operators while the rest of the filter is executed client-side within the Sync App.

Id support the following operator: =.
Created support the following operator: =.
Transaction support the following operator: =.
Status support the following operator: =.

The provider supports the use of all columns as criteria in the WHERE clause of SELECT statements, as long as SupportEnhancedSQL is set to True. If SupportEnhancedSQL property is set to False, you still can retrieve:

To query the IssuingDisputes we can try the below queries.

SELECT * FROM IssuingDisputes

SELECT * FROM IssuingDisputes WHERE status = 'expired'

Columns


Name	Type	References	Description
Id [KEY]	String		The id of files.
Amount	Integer		Disputed amount in the cards currency and in the smallest currency unit. Usually the amount of the transaction.
BalanceTransactions	String		List of balance transactions associated with the dispute.
Currency	String		The currency the transaction was made in.
Created	Datetime		Time at which the object was created. Measured in seconds since the Unix epoch.
EvidenceCanceled	String		Evidence provided when reason is canceled.
EvidenceDuplicate	String		Evidence provided when reason is duplicate.
EvidenceFraudulent	String		Evidence provided when reason is fraudulent.
EvidenceMerchandiseNotAsDescribed	String		Evidence provided when reason is merchandise_not_as_described.
EvidenceNotReceived	String		Evidence provided when reason is not_received.
EvidenceOther	String		Evidence provided when reason is other.
EvidenceReason	String		The reason for filing the dispute. Its value will match the field containing the evidence.
EvidenceServiceNotAsDescribed	String		The service was not as described.
MetadataAggregate	String		The set of key/value pairs that you can attach to a an object.
Status	String		Current status of the dispute.
Transaction	String		The transaction being disputed.
Object	String		Object.
Livemode	Boolean		LiveMode.

Pseudo-Columns

SELECT ステートメントのWHERE 句では、疑似カラムフィールドを使用して、データソースから返されるタプルを詳細に制御することができます。


Name	Type	Description
AccountId	String		Account Id.

ItemizedBalanceChangeFromActivityReport

Query the Itemized balance change from Activity report in Stripe.

Table Specific Information

It is used to query the Itemized balance change from Activity report in Stripe.

Note: It requires a live-mode API key which we can set using the LiveAPIKey connection property. The view is not visible without mentioning the LiveAPIKey.

Creating the Report

To create a report we need to pass some required parameters.

ParametersIntervalStart
ParametersIntervalEnd

To create a report we can also pass some optional parameters.

ParametersColumns
ParametersCurrency
ParametersTimezone
ParametersReportingCategory

//  This first creates the new Report and displays it. Report Creation takes time once it is created will display the report.
SELECT * FROM ItemizedBalanceChangeFromActivityReport WHERE ParametersIntervalStart = '2020-12-27' AND ParametersIntervalEnd = '2020-12-28'

Select

To query the report we can try the below queries.

SELECT * FROM ItemizedBalanceChangeFromActivityReport WHERE Id IN (SELECT Id FROM Reports WHERE report_type = 'balance_change_from_activity.itemized.3')
SELECT * FROM ItemizedBalanceChangeFromActivityReport WHERE Id IN ('frr_1I54dkATXQzBWNrlnaavpHGe', 'frr_1I3I59ATXQzBWNrl9VcczrDY') // This will show multiple reports
SELECT * FROM ItemizedBalanceChangeFromActivityReport WHERE Id = 'frr_1I480mATXQzBWNrlYQRaLQ9x' // This will show a respective report

Columns


Name	Type	References	Description
Automatic_Payout_Id	String		ID of the automatically created payout associated with this balance transaction (only set if your account is on an automatic payout schedule).
Automatic_Payout_Effective_At	Datetime		The date we expect this automatic payout to arrive in your bank account, in the requested timezone, or UTC if not provided. This is also when the paid-out funds are deducted from your Stripe balance.
Balance_Transaction_Id	String		Unique identifier for the balance transaction.
Created_UTC	Datetime		Time at which the balance transaction was created. Dates in UTC.
Created	Datetime		Time at which the balance transaction was created. Dates in the requested timezone, or UTC if not provided.
Available_On_UTC	Datetime		The date the balance transactions net funds will become available in the Stripe balance. Dates in UTC.
Available_On	Datetime		The date the balance transactions net funds will become available in the Stripe balance. Dates in the requested timezone, or UTC if not provided.
Currency	String		Three-letter ISO code for the currency in which gross, fee and net are defined.
Gross	Decimal		Gross amount of the transaction. Expressed in major units of the currency (e.g. dollars for USD, yen for JPY).
Fee	Decimal		Fees paid for this transaction. Expressed in major units of the currency (e.g. dollars for USD, yen for JPY).
Net	Decimal		Net amount of the transaction. Expressed in major units of the currency (e.g. dollars for USD, yen for JPY).
Reporting_Category	String		Reporting Category is a new categorization of balance transactions, meant to improve on the current type field.
Source_Id	String		The Stripe object to which this transaction is related.
Description	String		An arbitrary string attached to the balance transaction. Often useful for displaying to users.
Customer_Facing_Amount	Decimal		For transactions associated with charges or refunds, the amount of the original charge or refund.
Customer_Facing_Currency	String		For transactions associated with charges or refunds, the three-letter ISO code for the currency for customer_facing_amount.
Automatic_Payout_Effective_At_UTC	Datetime		The date we expect this automatic payout to arrive in your bank account, in UTC. This is also when the paid-out funds are deducted from your Stripe balance.
Customer_Id	String		The unique ID of the related customer, if any.
Customer_Email	String		Email address of the customer, if any, associated with this balance transaction.
Customer_Name	String		Name of the customer, if any, associated with this balance transaction.
Customer_Description	String		Description provided when creating the customer, often used to store the customer name.
Shipping_Address_Line1	String		First line of the shipping address associated with this charge, if any
Shipping_Address_Line2	String		Second line of the shipping address associated with this charge, if any
Shipping_Address_City	String		City of the shipping address associated with this charge, if any
Shipping_Address_State	String		State of the shipping address associated with this charge, if any
Shipping_Address_Postal_Code	String		Postal code of the shipping address associated with this charge, if any
Shipping_Address_Country	String		Country of the shipping address associated with this charge, if any
Charge_Id	String		Unique identifier for the original charge associated with this balance transaction. Available for charges, refunds and disputes.
Payment_Intent_Id	String		The unique ID of the related Payment Intent, if any.
Charge_Created_UTC	Datetime		Creation time of the original charge associated with this balance transaction. Available for charges, refunds and disputes. For charges that were separately authorized and captured, this is the authorization time. Dates in UTC.
Charge_Created	Datetime		Creation time of the original charge associated with this balance transaction. Available for charges, refunds and disputes. For charges that were separately authorized and captured, this is the authorization time. Dates in the requested timezone, or UTC if not provided.
Invoice_Id	String		Unique ID for the invoice associated with this balance transaction. Available for charges, refunds, and disputes made in connection with a Stripe Billing invoice.
Subscription_Id	String		Unique ID for the subscription associated with this balance transaction. Available for charges, refunds, and disputes made in connection with a Stripe Billing subscription.
Payment_Method_Type	String		The type of payment method used in the related payment.
Card_Brand	String		Card brand, if applicable.
Card_Funding	String		Card funding type, if applicable.
Card_Country	String		Two-letter ISO code representing the country of the card.
Statement_Descriptor	String		The dynamic statement descriptor or suffix specified when the related charge was created.
Dispute_Reason	String		Reason given by cardholder for dispute.
Connected_Account_Id	String		For Stripe Connect activity related to a connected account, the unique ID for the account.
Connected_Account_Name	String		For Stripe Connect activity related to a connected account, the name of the account.
Connected_Account_Country	String		For Stripe Connect activity related to a connected account, the two-letter ISO code representing the country of the account.
Regulatory_Tag	String		??An identifier reflecting the classification of this transaction according to local regulations, if applicable. Accounts with automatic payouts enabled receive a separate payout for each regulatory tag. ??This column is only populated for Brazilian accounts.
Payment_Metadata	String		Metadata associated with the related PaymentIntent, if any. If no PaymentIntent metadata exists, metadata from any related charge object will be returned. API requests including this column must specify a metadata key in brackets. This column can be specified multiple times to retrieve data from additional metadata keys.
Refund_Metadata	String		Metadata associated with the related refund object, if any. API requests including this column must specify a metadata key in brackets. This column can be specified multiple times to retrieve data from additional metadata keys.
Transfer_Metadata	String		Metadata associated with the related transfer object, if any. API requests including this column must specify a metadata key in brackets. This column can be specified multiple times to retrieve data from additional metadata keys.
Id [KEY]	String	Reports.Id	Unique identifier for the reports run object.
ParametersIntervalEnd	Datetime		Ending timestamp of data to be included in the report run (exclusive).
ParametersIntervalStart	Datetime		Starting timestamp of data to be included in the report run.
ParametersColumns	String		The set of output columns requested for inclusion in the report run.
ParametersCurrency	String		Currency of objects to be included in the report run.
ParametersReportingCategory	String		Category of balance transactions to be included in the report run.
ParametersTimezone	String		Defaults to Etc/UTC. The output timezone for all timestamps in the report.

ItemizedEndingBalanceReconciliationReport

Query the Itemized ending balance change from activity report in Stripe.

Table Specific Information

It is used to query the Itemized ending balance change from activity report in Stripe.

Note: It requires a live-mode API key which we can set using the LiveAPIKey connection property. The view is not visible without mentioning the LiveAPIKey.

Creating the Report

To create a report we need to pass some required parameters.

ParametersIntervalEnd

To create a report we can also pass some optional parameters.

ParametersColumns
ParametersCurrency
ParametersTimezone
ParametersReportingCategory

//  This first creates the new Report and displays it. Report Creation takes time once it is created will display the report.
SELECT * FROM ItemizedEndingBalanceReconciliationReport WHERE ParametersIntervalEnd = '2020-12-28'

Select

To query the report we can try the below queries.

SELECT * FROM ItemizedEndingBalanceReconciliationReport WHERE Id IN (SELECT Id FROM Reports WHERE report_type = 'ending_balance_reconciliation.itemized.4')
SELECT * FROM ItemizedEndingBalanceReconciliationReport WHERE Id IN ('frr_1I54dkATXQzBWNrlnaavpHGe', 'frr_1I3I59ATXQzBWNrl9VcczrDY')// This will show multiple reports
SELECT * FROM ItemizedEndingBalanceReconciliationReport WHERE Id = 'frr_1I480mATXQzBWNrlYQRaLQ9x' // This will show a respective report

Columns


Name	Type	References	Description
Balance_Transaction_Id	String		Unique identifier for the balance transaction.
Created_UTC	Datetime		Time at which the balance transaction was created. Dates in UTC.
Created	Datetime		Time at which the balance transaction was created. Dates in the requested timezone, or UTC if not provided.
Available_On_UTC	Datetime		The date the balance transactions net funds will become available in the Stripe balance. Dates in UTC.
Available_On	Datetime		The date the balance transactions net funds will become available in the Stripe balance. Dates in the requested timezone, or UTC if not provided.
Currency	String		Three-letter ISO code for the currency in which gross, fee and net are defined.
Gross	Decimal		Gross amount of the transaction. Expressed in major units of the currency (e.g. dollars for USD, yen for JPY).
Fee	Decimal		Fees paid for this transaction. Expressed in major units of the currency (e.g. dollars for USD, yen for JPY).
Net	Decimal		Net amount of the transaction. Expressed in major units of the currency (e.g. dollars for USD, yen for JPY).
Reporting_Category	String		Reporting Category is a new categorization of balance transactions, meant to improve on the current type field.
Source_Id	String		The Stripe object to which this transaction is related.
Description	String		An arbitrary string attached to the balance transaction. Often useful for displaying to users.
Customer_Facing_Amount	Decimal		For transactions associated with charges or refunds, the amount of the original charge or refund.
Customer_Facing_Currency	String		For transactions associated with charges or refunds, the three-letter ISO code for the currency for customer_facing_amount.
Automatic_Payout_Id	String		ID of the automatically created payout associated with this balance transaction (only set if your account is on an automatic payout schedule).
Automatic_Payout_Effective_At_UTC	Datetime		The date we expect this automatic payout to arrive in your bank account, in UTC. This is also when the paid-out funds are deducted from your Stripe balance.
Automatic_Payout_Effective_At	Datetime		The date we expect this automatic payout to arrive in your bank account, in the requested timezone, or UTC if not provided. This is also when the paid-out funds are deducted from your Stripe balance.
Customer_Id	String		The unique ID of the related customer, if any.
Customer_Email	String		Email address of the customer, if any, associated with this balance transaction.
Customer_Name	String		Name of the customer, if any, associated with this balance transaction.
Customer_Description	String		Description provided when creating the customer, often used to store the customer name.
Shipping_Address_Line1	String		First line of the shipping address associated with this charge, if any
Shipping_Address_Line2	String		Second line of the shipping address associated with this charge, if any
Shipping_Address_City	String		City of the shipping address associated with this charge, if any
Shipping_Address_State	String		State of the shipping address associated with this charge, if any
Shipping_Address_Postal_Code	String		Postal code of the shipping address associated with this charge, if any
Shipping_Address_Country	String		Country of the shipping address associated with this charge, if any
Charge_Id	String		Unique identifier for the original charge associated with this balance transaction. Available for charges, refunds and disputes.
Payment_Intent_Id	String		The unique ID of the related Payment Intent, if any.
Charge_Created_UTC	Datetime		Creation time of the original charge associated with this balance transaction. Available for charges, refunds and disputes. For charges that were separately authorized and captured, this is the authorization time. Dates in UTC.
Charge_Created	Datetime		Creation time of the original charge associated with this balance transaction. Available for charges, refunds and disputes. For charges that were separately authorized and captured, this is the authorization time. Dates in the requested timezone, or UTC if not provided.
Invoice_Id	String		Unique ID for the invoice associated with this balance transaction. Available for charges, refunds, and disputes made in connection with a Stripe Billing invoice.
Subscription_Id	String		Unique ID for the subscription associated with this balance transaction. Available for charges, refunds, and disputes made in connection with a Stripe Billing subscription.
Payment_Method_Type	String		The type of payment method used in the related payment.
Card_Brand	String		Card brand, if applicable.
Card_Funding	String		Card funding type, if applicable.
Card_Country	String		Two-letter ISO code representing the country of the card.
Statement_Descriptor	String		The dynamic statement descriptor or suffix specified when the related charge was created.
Dispute_Reason	String		Reason given by cardholder for dispute.
Connected_Account_Id	String		For Stripe Connect activity related to a connected account, the unique ID for the account.
Connected_Account_Name	String		For Stripe Connect activity related to a connected account, the name of the account.
Connected_Account_Country	String		For Stripe Connect activity related to a connected account, the two-letter ISO code representing the country of the account.
Regulatory_Tag	String		??An identifier reflecting the classification of this transaction according to local regulations, if applicable. Accounts with automatic payouts enabled receive a separate payout for each regulatory tag. ??This column is only populated for Brazilian accounts.
Payment_Metadata	String		Metadata associated with the related PaymentIntent, if any. If no PaymentIntent metadata exists, metadata from any related charge object will be returned. API requests including this column must specify a metadata key in brackets. This column can be specified multiple times to retrieve data from additional metadata keys.
Refund_Metadata	String		Metadata associated with the related refund object, if any. API requests including this column must specify a metadata key in brackets. This column can be specified multiple times to retrieve data from additional metadata keys.
Transfer_Metadata	String		Metadata associated with the related transfer object, if any. API requests including this column must specify a metadata key in brackets. This column can be specified multiple times to retrieve data from additional metadata keys.
Id [KEY]	String	Reports.Id	Unique identifier for the reports run object.
ParametersIntervalEnd	Datetime		Ending timestamp of data to be included in the report run (exclusive).
ParametersColumns	String		The set of output columns requested for inclusion in the report run.
ParametersCurrency	String		Currency of objects to be included in the report run.
ParametersReportingCategory	String		Category of balance transactions to be included in the report run.
ParametersTimezone	String		Defaults to Etc/UTC. The output timezone for all timestamps in the report.

ItemizedPayoutReconciliationReport

Query the Itemized payout reconciliation report in Stripe.

Table Specific Information

It is used to query the Itemized payout reconciliation report in Stripe.

Note: It requires a live-mode API key which we can set using the LiveAPIKey connection property. The view is not visible without mentioning the LiveAPIKey.

Creating the Report

To create a report we need to pass some required parameters.

ParametersIntervalStart
ParametersIntervalEnd

To create a report we can also pass some optional parameters.

ParametersColumns
ParametersCurrency
ParametersTimezone
ParametersReportingCategory

//  This first creates the new Report and displays it. Report Creation takes time once it is created will display the report.
SELECT * FROM ItemizedPayoutReconciliationReport WHERE ParametersIntervalStart = '2020-12-27' AND ParametersIntervalEnd = '2020-12-28'

Select

To query the report we can try the below queries.

SELECT * FROM ItemizedPayoutReconciliationReport WHERE Id IN (SELECT Id FROM Reports WHERE report_type = 'payout_reconciliation.itemized.4')	
SELECT * FROM ItemizedPayoutReconciliationReport WHERE Id IN ('frr_1I54dkATXQzBWNrlnaavpHGe', 'frr_1I3I59ATXQzBWNrl9VcczrDY') // This will show multiple reports
SELECT * FROM ItemizedPayoutReconciliationReport WHERE Id = 'frr_1I480mATXQzBWNrlYQRaLQ9x' // This will show a respective report

Columns


Name	Type	References	Description
Balance_Transaction_Id	String		Unique identifier for the balance transaction.
Created_UTC	Datetime		Time at which the balance transaction was created. Dates in UTC.
Created	Datetime		Time at which the balance transaction was created. Dates in the requested timezone, or UTC if not provided.
Available_On_UTC	Datetime		The date the balance transactions net funds will become available in the Stripe balance. Dates in UTC.
Available_On	Datetime		The date the balance transactions net funds will become available in the Stripe balance. Dates in the requested timezone, or UTC if not provided.
Currency	String		Three-letter ISO code for the currency in which gross, fee and net are defined.
Gross	Decimal		Gross amount of the transaction. Expressed in major units of the currency (e.g. dollars for USD, yen for JPY).
Fee	Decimal		Fees paid for this transaction. Expressed in major units of the currency (e.g. dollars for USD, yen for JPY).
Net	Decimal		Net amount of the transaction. Expressed in major units of the currency (e.g. dollars for USD, yen for JPY).
Reporting_Category	String		Reporting Category is a new categorization of balance transactions, meant to improve on the current type field.
Source_Id	String		The Stripe object to which this transaction is related.
Description	String		An arbitrary string attached to the balance transaction. Often useful for displaying to users.
Customer_Facing_Amount	Decimal		For transactions associated with charges or refunds, the amount of the original charge or refund.
Customer_Facing_Currency	String		For transactions associated with charges or refunds, the three-letter ISO code for the currency for customer_facing_amount.
Automatic_Payout_Id	String		ID of the automatically created payout associated with this balance transaction (only set if your account is on an automatic payout schedule).
Automatic_Payout_Effective_At_UTC	Datetime		The date we expect this automatic payout to arrive in your bank account, in UTC. This is also when the paid-out funds are deducted from your Stripe balance.
Automatic_Payout_Effective_At	Datetime		The date we expect this automatic payout to arrive in your bank account, in the requested timezone, or UTC if not provided. This is also when the paid-out funds are deducted from your Stripe balance.
Customer_Id	String		The unique ID of the related customer, if any.
Customer_Email	String		Email address of the customer, if any, associated with this balance transaction.
Customer_Name	String		Name of the customer, if any, associated with this balance transaction.
Customer_Description	String		Description provided when creating the customer, often used to store the customer name.
Shipping_Address_Line1	String		First line of the shipping address associated with this charge, if any
Shipping_Address_Line2	String		Second line of the shipping address associated with this charge, if any
Shipping_Address_City	String		City of the shipping address associated with this charge, if any
Shipping_Address_State	String		State of the shipping address associated with this charge, if any
Shipping_Address_Postal_Code	String		Postal code of the shipping address associated with this charge, if any
Shipping_Address_Country	String		Country of the shipping address associated with this charge, if any
Charge_Id	String		Unique identifier for the original charge associated with this balance transaction. Available for charges, refunds and disputes.
Payment_Intent_Id	String		The unique ID of the related Payment Intent, if any.
Charge_Created_UTC	Datetime		Creation time of the original charge associated with this balance transaction. Available for charges, refunds and disputes. For charges that were separately authorized and captured, this is the authorization time. Dates in UTC.
Charge_Created	Datetime		Creation time of the original charge associated with this balance transaction. Available for charges, refunds and disputes. For charges that were separately authorized and captured, this is the authorization time. Dates in the requested timezone, or UTC if not provided.
Invoice_Id	String		Unique ID for the invoice associated with this balance transaction. Available for charges, refunds, and disputes made in connection with a Stripe Billing invoice.
Subscription_Id	String		Unique ID for the subscription associated with this balance transaction. Available for charges, refunds, and disputes made in connection with a Stripe Billing subscription.
Payment_Method_Type	String		The type of payment method used in the related payment.
Card_Brand	String		Card brand, if applicable.
Card_Funding	String		Card funding type, if applicable.
Card_Country	String		Two-letter ISO code representing the country of the card.
Statement_Descriptor	String		The dynamic statement descriptor or suffix specified when the related charge was created.
Dispute_Reason	String		Reason given by cardholder for dispute.
Connected_Account_Id	String		For Stripe Connect activity related to a connected account, the unique ID for the account.
Connected_Account_Name	String		For Stripe Connect activity related to a connected account, the name of the account.
Connected_Account_Country	String		For Stripe Connect activity related to a connected account, the two-letter ISO code representing the country of the account.
Regulatory_Tag	String		??An identifier reflecting the classification of this transaction according to local regulations, if applicable. Accounts with automatic payouts enabled receive a separate payout for each regulatory tag. ??This column is only populated for Brazilian accounts.
Payment_Metadata	String		Metadata associated with the related PaymentIntent, if any. If no PaymentIntent metadata exists, metadata from any related charge object will be returned. API requests including this column must specify a metadata key in brackets. This column can be specified multiple times to retrieve data from additional metadata keys.
Refund_Metadata	String		Metadata associated with the related refund object, if any. API requests including this column must specify a metadata key in brackets. This column can be specified multiple times to retrieve data from additional metadata keys.
Transfer_Metadata	String		Metadata associated with the related transfer object, if any. API requests including this column must specify a metadata key in brackets. This column can be specified multiple times to retrieve data from additional metadata keys.
Id [KEY]	String	Reports.Id	Unique identifier for the reports run object.
ParametersIntervalEnd	Datetime		Ending timestamp of data to be included in the report run (exclusive).
ParametersIntervalStart	Datetime		Starting timestamp of data to be included in the report run.
ParametersColumns	String		The set of output columns requested for inclusion in the report run.
ParametersCurrency	String		Currency of objects to be included in the report run.
ParametersReportingCategory	String		Category of balance transactions to be included in the report run.
ParametersTimezone	String		Defaults to Etc/UTC. The output timezone for all timestamps in the report.

ItemizedPayoutsReport

Query the Itemized payouts report in Stripe.

Table Specific Information

It is used to query the Itemized payouts report in Stripe.

Note: It requires a live-mode API key which we can set using the LiveAPIKey connection property. The view is not visible without mentioning the LiveAPIKey.

Creating the Report

To create a report we need to pass some required parameters.

ParametersIntervalStart
ParametersIntervalEnd

To create a report we can also pass some optional parameters.

ParametersColumns
ParametersCurrency
ParametersTimezone
ParametersReportingCategory

//  This first creates the new Report and displays it. Report Creation takes time once it is created will display the report.
SELECT * FROM ItemizedPayoutsReport WHERE ParametersIntervalStart = '2020-12-27' AND ParametersIntervalEnd = '2020-12-28'

Select

To query the report we can try the below queries.

SELECT * FROM ItemizedPayoutsReport WHERE Id IN (SELECT Id FROM Reports WHERE report_type = 'payouts.itemized.3')
SELECT * FROM ItemizedPayoutsReport WHERE Id IN ('frr_1I54dkATXQzBWNrlnaavpHGe', 'frr_1I3I59ATXQzBWNrl9VcczrDY') // This will show multiple reports
SELECT * FROM ItemizedPayoutsReport WHERE Id = 'frr_1I480mATXQzBWNrlYQRaLQ9x' // This will show a respective report

Columns


Name	Type	References	Description
Payout_Id	String		The Stripe object to which this transaction is related.
Effective_At_UTC	Datetime		For automatic payouts, this is the date we expect funds to arrive in your bank account. For manual payouts, this is the date the payout was initiated. In both cases, its the date the paid-out funds are deducted from your Stripe balance. All dates in UTC.
Effective_At	Datetime		For automatic payouts, this is the date we expect funds to arrive in your bank account. For manual payouts, this is the date the payout was initiated. In both cases, its the date the paid-out funds are deducted from your Stripe balance. All dates in the requested timezone, or UTC if not provided.
Currency	String		Three-letter ISO code for the currency in which gross, fee and net are defined.
Gross	Decimal		Gross amount of the transaction. Expressed in major units of the currency (e.g. dollars for USD, yen for JPY).
Fee	Decimal		Fees paid for this transaction. Expressed in major units of the currency (e.g. dollars for USD, yen for JPY).
Net	Decimal		Net amount of the transaction. Expressed in major units of the currency (e.g. dollars for USD, yen for JPY).
Reporting_Category	String		Reporting Category is a new categorization of balance transactions, meant to improve on the current type field.
Balance_Transaction_Id	String		Unique identifier for the balance transaction.
Description	String		An arbitrary string attached to the balance transaction. Often useful for displaying to users.
Payout_Expected_Arrival_Date	Datetime		Date the payout is scheduled to arrive in the bank. This factors in delays like weekends or bank holidays.
Payout_Status	String		Current status of the payout (paid, pending, in_transit, canceled or failed). A payout will be pending until it is submitted to the bank, at which point it becomes in_transit. It will then change to paid if the transaction goes through. If it does not go through successfully, its status will change to failed or canceled.
Payout_Reversed_At_UTC	Datetime		Typically this field will be empty. However, if the payouts status is canceled or failed, this field will reflect the time at which it entered that status. Times in UTC.
Payout_Reversed_At	Datetime		Typically this field will be empty. However, if the payouts status is canceled or failed, this field will reflect the time at which it entered that status. Times in the requested timezone, or UTC if not provided.
Payout_Type	String		Can be bank_account or card.
Payout_Description	String		An arbitrary string attached to the payout. Often useful for displaying to users.
Payout_Destination_Id	String		ID of the bank account or card the payout was sent to.
Regulatory_Tag	String		??An identifier reflecting the classification of this transaction according to local regulations, if applicable. Accounts with automatic payouts enabled receive a separate payout for each regulatory tag. ??This column is only populated for Brazilian accounts.
Id [KEY]	String	Reports.Id	Unique identifier for the reports run object.
ParametersIntervalEnd	Datetime		Ending timestamp of data to be included in the report run (exclusive).
ParametersIntervalStart	Datetime		Starting timestamp of data to be included in the report run.
ParametersColumns	String		The set of output columns requested for inclusion in the report run.
ParametersCurrency	String		Currency of objects to be included in the report run.
ParametersReportingCategory	String		Category of balance transactions to be included in the report run.
ParametersTimezone	String		Defaults to Etc/UTC. The output timezone for all timestamps in the report.

ItemizedReconciliationForASinglePayoutReport

Query the Itemized reconciliation for a single payout report in Stripe.

Table Specific Information

It is used to query the Itemized reconciliation for a single payout report in Stripe.

Note: It requires a live-mode API key which we can set using the LiveAPIKey connection property. The view is not visible without mentioning the LiveAPIKey.

Creating the Report

To create a report we need to pass some required parameters.

ParametersPayout

To create a report we can also pass some optional parameters.

ParametersColumns
ParametersTimezone
ParametersReportingCategory

//  This first creates the new Report and displays it. Report Creation takes time once it is created will display the report.
SELECT * FROM ItemizedReconciliationForASinglePayoutReport WHERE ParametersPayout = '123456789'

Select

To query the report we can try the below queries.

SELECT * FROM ItemizedReconciliationForASinglePayoutReport WHERE Id IN (SELECT Id FROM Reports WHERE report_type = 'payout_reconciliation.by_id.itemized.4')
SELECT * FROM ItemizedReconciliationForASinglePayoutReport WHERE Id IN ('frr_1I54dkATXQzBWNrlnaavpHGe', 'frr_1I3I59ATXQzBWNrl9VcczrDY') // This will show multiple reports
SELECT * FROM ItemizedReconciliationForASinglePayoutReport WHERE Id = 'frr_1I480mATXQzBWNrlYQRaLQ9x' // This will show a respective report

Columns


Name	Type	References	Description
Balance_Transaction_Id	String		Unique identifier for the balance transaction.
Created_UTC	Datetime		Time at which the balance transaction was created. Dates in UTC.
Created	Datetime		Time at which the balance transaction was created. Dates in the requested timezone, or UTC if not provided.
Available_On_UTC	Datetime		The date the balance transactions net funds will become available in the Stripe balance. Dates in UTC.
Available_On	Datetime		The date the balance transactions net funds will become available in the Stripe balance. Dates in the requested timezone, or UTC if not provided.
Currency	String		Three-letter ISO code for the currency in which gross, fee and net are defined.
Gross	Decimal		Gross amount of the transaction. Expressed in major units of the currency (e.g. dollars for USD, yen for JPY).
Fee	Decimal		Fees paid for this transaction. Expressed in major units of the currency (e.g. dollars for USD, yen for JPY).
Net	Decimal		Net amount of the transaction. Expressed in major units of the currency (e.g. dollars for USD, yen for JPY).
Reporting_Category	String		Reporting Category is a new categorization of balance transactions, meant to improve on the current type field.
Source_Id	String		The Stripe object to which this transaction is related.
Description	String		An arbitrary string attached to the balance transaction. Often useful for displaying to users.
Customer_Facing_Amount	Decimal		For transactions associated with charges or refunds, the amount of the original charge or refund.
Customer_Facing_Currency	String		For transactions associated with charges or refunds, the three-letter ISO code for the currency for customer_facing_amount.
Automatic_Payout_Id	String		ID of the automatically created payout associated with this balance transaction (only set if your account is on an automatic payout schedule).
Automatic_Payout_Effective_At_UTC	Datetime		The date we expect this automatic payout to arrive in your bank account, in UTC. This is also when the paid-out funds are deducted from your Stripe balance.
Automatic_Payout_Effective_At	Datetime		The date we expect this automatic payout to arrive in your bank account, in the requested timezone, or UTC if not provided. This is also when the paid-out funds are deducted from your Stripe balance.
Customer_Id	String		The unique ID of the related customer, if any.
Customer_Email	String		Email address of the customer, if any, associated with this balance transaction.
Customer_Name	String		Name of the customer, if any, associated with this balance transaction.
Customer_Description	String		Description provided when creating the customer, often used to store the customer name.
Shipping_Address_Line1	String		First line of the shipping address associated with this charge, if any
Shipping_Address_Line2	String		Second line of the shipping address associated with this charge, if any
Shipping_Address_City	String		City of the shipping address associated with this charge, if any
Shipping_Address_State	String		State of the shipping address associated with this charge, if any
Shipping_Address_Postal_Code	String		Postal code of the shipping address associated with this charge, if any
Shipping_Address_Country	String		Country of the shipping address associated with this charge, if any
Charge_Id	String		Unique identifier for the original charge associated with this balance transaction. Available for charges, refunds and disputes.
Payment_Intent_Id	String		The unique ID of the related Payment Intent, if any.
Charge_Created_UTC	Datetime		Creation time of the original charge associated with this balance transaction. Available for charges, refunds and disputes. For charges that were separately authorized and captured, this is the authorization time. Dates in UTC.
Charge_Created	Datetime		Creation time of the original charge associated with this balance transaction. Available for charges, refunds and disputes. For charges that were separately authorized and captured, this is the authorization time. Dates in the requested timezone, or UTC if not provided.
Invoice_Id	String		Unique ID for the invoice associated with this balance transaction. Available for charges, refunds, and disputes made in connection with a Stripe Billing invoice.
Subscription_Id	String		Unique ID for the subscription associated with this balance transaction. Available for charges, refunds, and disputes made in connection with a Stripe Billing subscription.
Payment_Method_Type	String		The type of payment method used in the related payment.
Card_Brand	String		Card brand, if applicable.
Card_Funding	String		Card funding type, if applicable.
Card_Country	String		Two-letter ISO code representing the country of the card.
Statement_Descriptor	String		The dynamic statement descriptor or suffix specified when the related charge was created.
Dispute_Reason	String		Reason given by cardholder for dispute.
Connected_Account_Id	String		For Stripe Connect activity related to a connected account, the unique ID for the account.
Connected_Account_Name	String		For Stripe Connect activity related to a connected account, the name of the account.
Connected_Account_Country	String		For Stripe Connect activity related to a connected account, the two-letter ISO code representing the country of the account.
Id [KEY]	String	Reports.Id	Unique identifier for the reports run object.
ParametersColumns	String		The set of output columns requested for inclusion in the report run.
ParametersPayout	String	Payouts.Id	Payout ID by which to filter the report run.
ParametersReportingCategory	String		Category of balance transactions to be included in the report run.
ParametersTimezone	String		Defaults to Etc/UTC. The output timezone for all timestamps in the report.

Orders

Query the available orders in Stripe.

Table Specific Information

Select

Server-Side Query Support

The Sync App uses the Stripe API to filter the results by the following columns and operators while the rest of the filter is executed client-side within the Sync App.

Id, Customer, Status and AccountId support the following operators: IN,<,>>=,<,<=,=.
Created support the following operators: IN,<,>>=,<,<=,=.

The provider supports the use of all columns as criteria in the WHERE clause of SELECT statements, as long as SupportEnhancedSQL is set to True. If SupportEnhancedSQL property is set to False, you still can retrieve:

-an Order by specifying its Id:

SELECT * FROM Orders WHERE Id = 'or_12345678'

-an Order by specifying its Ids:

SELECT * FROM Orders WHERE Id IN ('or_12345678', 'or_123456789', 'or_123456788')

-Orders created after a specific date (Created may be used with the >, >=, <, <=, or = conditions and may be used twice to specify a range):

SELECT * FROM Orders WHERE Created > '2016-01-03'

-Orders for a given Customer:

SELECT * FROM Orders WHERE Customer = 'cus_12345678'

-Orders with a specific Status:

SELECT * FROM Orders WHERE Status = 'paid'

Columns


Name	Type	References	Description
Id [KEY]	String		ID of card.
Amount	Integer		A positive integer in the smallest currency unit (that is, 100 cents for $1.00, or 1 for ¥1, Japanese Yen being a 0-decimal currency) representing the total amount for the order.
Application	String		ID of the Connect Application that created the order.
ApplicationFee	Integer		Integer.
Created	Datetime		Time of creation.
Charge	String		The Id of the payment used to pay for the order. Present if the order status is paid, fulfilled, or refunded.
Currency	String		3-letter ISO code representing the currency in which the order was made.
Customer	String		The customer used for the order.
Email	String		The email address of the customer placing the order.
ExternalCouponCode	String		The external coupon code.
ItemsAggregate	String		List of items constituting the order.
SelectedShippingMethod	String		The shipping method that is currencly selected for this order, if any.
Shipping	String		The shipping address for the order. Present if the order is for goods to be shipped.
ShippingMethodsAggregate	String		A list of supported shipping methods for this order.
Status	String		Current order status.
StatusTransitions	String		The datetimes at which the order status was updated.
Updated	Datetime		The time when the order is last updated.

Pseudo-Columns

SELECT ステートメントのWHERE 句では、疑似カラムフィールドを使用して、データソースから返されるタプルを詳細に制御することができます。


Name	Type	Description
AccountId	String		The Id of the connected account to get orders for

PaymentLinkLineItems

Query the available PaymentLink line items in Stripe.

Table Specific Information

Select

The Sync App uses the Stripe API to filter the results by the following columns and operators while the rest of the filter is executed client-side within the Sync App.

PaymentLinkId supports the following operator: =.
AccountId supports the following operator: =.

SELECT * FROM PaymentLinkLineItems WHERE PaymentLinkId = 'plink_1MHJbZSC4snQ4WkOqF4MChgG'
SELECT * FROM PaymentLinkLineItems WHERE PaymentLinkId = 'plink_1MHJbZSC4snQ4WkOqF4MChgG' AND AccountId = 'acct_1MGcyqSC4snQ4WkO'

Columns


Name	Type	References	Description
Id [KEY]	String		Id of the PaymentLinkLineItems.
PaymentLinkId	String	PaymentLinks.Id	Payment Links Id.
AmountDiscount	Integer		Total discount amount applied. If no discounts were applied, defaults to 0.
AmountSubtotal	Integer		Total before any discounts or taxes are applied.
AmountTax	Integer		Total tax amount applied. If no tax was applied, defaults to 0.
AmountTotal	Integer		Total after discounts and taxes.
Currency	String		Three-letter ISO currency code, in lowercase. Must be a supported currency.
Description	String		An arbitrary string attached to the object. Often useful for displaying to users. Defaults to product name.
Object	String		Name of the Object.
PriceActive	Boolean		Whether the price can be used for new purchases.
PriceBillingScheme	String		How to compute the price per period. Either per_unit or tiered. per_unit indicates that the fixed amount (specified in unit_amount or unit_amount_decimal) will be charged per unit in quantity (for prices with usage_type=licensed), or per unit of total usage (for prices with usage_type=metered). tiered indicates that the unit pricing will be computed using a tiering strategy as defined using the tiers and tiers_mode attributes.
PriceCreated	Datetime		Time at which the object was created. Measured in seconds since the Unix epoch.
PriceCurrency	String		Three-letter ISO currency code, in lowercase. Must be a supported currency.
PriceCustomUnitAmount	String		When set, provides configuration for the amount to be adjusted by the customer during Checkout Sessions and Payment Links.
PriceId	String		Id of the price.
PriceLivemode	Boolean		True if the object exists in live mode. False if the object exists in test mode.
PriceLookupKey	String		A lookup key used to retrieve prices dynamically from a static string. This may be up to 200 characters.
PriceNickname	String		A brief description of the price, hidden from customers.
PriceObject	String		The object name for the price.
PriceProduct	String		The ID of the product this price is associated with.
PriceRecurring	String		The recurring components of a price such as interval and usage_type.
PriceTaxBehavior	String		Specifies whether the price is considered inclusive of taxes or exclusive of taxes. One of inclusive, exclusive, or unspecified. Once specified as either inclusive or exclusive, it cannot be changed.
PriceTiersMode	String		Each element represents a pricing tier. This parameter requires billing_scheme to be set to tiered. See also the documentation for billing_scheme. This field is not included by default. To include it in the response, expand the tiers field.
PriceTransformQuantity	String		Apply a transformation to the reported usage or set quantity before computing the amount billed. Cannot be combined with tiers.
PriceType	String		One of one_time or recurring depending on whether the price is for a one-time purchase or a recurring (subscription) purchase.
PriceUnitAmount	Integer		The unit amount in paise to be charged, represented as a whole integer if possible. Only set if billing_scheme=per_unit.
PriceUnitAmountDecimal	Decimal		The unit amount in paise to be charged, represented as a decimal string with at most 12 decimal places. Only set if billing_scheme=per_unit.
Quantity	Integer		The quantity of the products being purchased.

Pseudo-Columns

SELECT ステートメントのWHERE 句では、疑似カラムフィールドを使用して、データソースから返されるタプルを詳細に制御することができます。


Name	Type	Description
AdjustableQuantityEnabled	Boolean		Set to true if the quantity can be adjusted to any non-negative Integer.
AdjustableQuantityMinimum	Integer		The maximum quantity the customer can purchase. By default this value is 99. You can specify a value up to 999.
AdjustableQuantityMaximum	Integer		The minimum quantity the customer can purchase. By default this value is 0. If there is only one item in the cart then that item quantity cannot go down to 0.
AccountId	String		The Id of the connected account.

PaymentMethodDomains

Lists the details of existing payment method domains.

Table Specific Information

Select

Server-Side Query Support

The Sync App uses the Stripe API to filter the results by the following columns and operators while the rest of the filter is executed client-side within the Sync App.

Id support the following operator: =.
DomainName support the following operator: =.
Enabled support the following operator: =.

The provider supports the use of all columns as criteria in the WHERE clause of SELECT statements, as long as SupportEnhancedSQL is set to True. If SupportEnhancedSQL property is set to False, you still can retrieve:

To query the PaymentMethodDomains we can try the below queries.

SELECT * from PaymentMethodDomains where id='pmd_1OgQ87SC4snQ4WkOiSNV7rXG'

SELECT * from PaymentMethodDomains where domainname='www.paymentmethod.com'

SELECT * from PaymentMethodDomains where enabled = false

Columns


Name	Type	References	Description
Id [KEY]	String		Unique identifier for the object.
DomainName	String		The domain name that this payment method domain object represents.
Enabled	Boolean		Whether this payment method domain is enabled.
ApplePayStatus	String		The status of the payment method on the domain.
ApplePayStatusDetailsErrorMessage	String		The error message associated with the status of the payment method on the domain.
Created	Datetime		Time at which the object was created. Measured in seconds since the Unix epoch.
GooglePayStatus	String		The status of the payment method on the domain.
GooglePayStatusDetailsErrorMessage	String		The error message associated with the status of the payment method on the domain.
LinkStatus	String		The status of the payment method on the domain.
LinkStatusDetailsErrorMessage	String		The error message associated with the status of the payment method on the domain.
Livemode	Boolean		Has the value true if the object exists in live mode or the value false if the object exists in test mode.
Object	String		Has the value true if the object exists in live mode or the value false if the object exists in test mode.
PaypalStatus	String		The status of the payment method on the domain.
PaypalStatusDetailsErrorMessage	String		The error message associated with the status of the payment method on the domain.

PayoutsReconciliationSummaryForASinglePayoutReport

Payouts reconciliation summary for a single payout in Stripe.

Table Specific Information

It is used to query the Payouts reconciliation summary for a single payout in Stripe.

Note: It requires a live-mode API key which we can set using the LiveAPIKey connection property. The view is not visible without mentioning the LiveAPIKey.

Creating the Report

To create a report we need to pass some required parameters.

ParametersPayout

To create a report we can also pass some optional parameters.

ParametersColumns

//  This first creates the new Report and displays it. Report Creation takes time once it is created will display the report.
SELECT * FROM PayoutsReconciliationSummaryForASinglePayoutReport WHERE ParametersPayout = '12345678'

Select

To query the report we can try the below queries.

SELECT * FROM PayoutsReconciliationSummaryForASinglePayoutReport WHERE Id IN (SELECT Id FROM Reports WHERE report_type = 'payout_reconciliation.by_id.summary.1')
SELECT * FROM PayoutsReconciliationSummaryForASinglePayoutReport WHERE Id IN ('frr_1I54dkATXQzBWNrlnaavpHGe', 'frr_1I3I59ATXQzBWNrl9VcczrDY')// This will show multiple reports
SELECT * FROM PayoutsReconciliationSummaryForASinglePayoutReport WHERE Id = 'frr_1I480mATXQzBWNrlYQRaLQ9x' // This will show a respective report

Columns


Name	Type	References	Description
Reporting_Category	String		Reporting Category is a new categorization of balance transactions, meant to improve on the current type field.
Currency	String		Three-letter ISO code for the currency in which gross, fee and net are defined.
Count	Int		The number of transactions associated with the reporting_category.
Gross	Decimal		Sum of the gross amounts of the transactions associated with the reporting_category. Expressed in major units of the currency (e.g. dollars for USD, yen for JPY).
Fee	Decimal		Sum of the fees paid for the transactions associated with the reporting_category. Expressed in major units of the currency (e.g. dollars for USD, yen for JPY).
Net	Decimal		Sum of the net amounts for the transactions associated with the reporting_category. Expressed in major units of the currency (e.g. dollars for USD, yen for JPY).
Id	String	Reports.Id	Unique identifier for the reports run object.
ParametersColumns	String		The set of output columns requested for inclusion in the report run.
ParametersPayout	String	Payouts.Id	Payout ID by which to filter the report run.

PayoutsReconciliationSummaryReport

Query the Payouts reconciliation summary report in Stripe.

Table Specific Information

It is used to query the Payouts reconciliation summary report in Stripe.

Note: It requires a live-mode API key which we can set using the LiveAPIKey connection property. The view is not visible without mentioning the LiveAPIKey.

Creating the Report

To create a report we need to pass some required parameters.

ParametersIntervalStart
ParametersIntervalEnd

To create a report we can also pass some optional parameters.

ParametersColumns
ParametersCurrency

//  This first creates the new Report and displays it. Report Creation takes time once it is created will display the report.
SELECT * FROM PayoutsReconciliationSummaryReport WHERE ParametersIntervalStart = '2020-12-27' AND ParametersIntervalEnd = '2020-12-28'

Select

To query the report we can try the below queries.

SELECT * FROM PayoutsReconciliationSummaryReport WHERE Id IN (SELECT Id FROM Reports WHERE report_type = 'payout_reconciliation.summary.1')
SELECT * FROM PayoutsReconciliationSummaryReport WHERE Id IN ('frr_1I54dkATXQzBWNrlnaavpHGe', 'frr_1I3I59ATXQzBWNrl9VcczrDY')// This will show multiple reports
SELECT * FROM PayoutsReconciliationSummaryReport WHERE Id = 'frr_1I480mATXQzBWNrlYQRaLQ9x' // This will show a respective report

Columns


Name	Type	References	Description
Reporting_Category	String		Reporting Category is a new categorization of balance transactions, meant to improve on the current type field.
Currency	String		Three-letter ISO code for the currency in which gross, fee and net are defined.
Count	Int		The number of transactions associated with the reporting_category.
Gross	Decimal		Sum of the gross amounts of the transactions associated with the reporting_category. Expressed in major units of the currency (e.g. dollars for USD, yen for JPY).
Fee	Decimal		Sum of the fees paid for the transactions associated with the reporting_category. Expressed in major units of the currency (e.g. dollars for USD, yen for JPY).
Net	Decimal		Sum of the net amounts for the transactions associated with the reporting_category. Expressed in major units of the currency (e.g. dollars for USD, yen for JPY).
Id	String	Reports.Id	Unique identifier for the reports run object.
ParametersIntervalEnd	Datetime		Ending timestamp of data to be included in the report run (exclusive).
ParametersIntervalStart	Datetime		Starting timestamp of data to be included in the report run.
ParametersColumns	String		The set of output columns requested for inclusion in the report run.
ParametersCurrency	String		Currency of objects to be included in the report run.

PayoutsSummaryReport

Query the Payouts summary report in Stripe.

Table Specific Information

It is used to query the Payouts summary report in Stripe.

Note: It requires a live-mode API key which we can set using the LiveAPIKey connection property. The view is not visible without mentioning the LiveAPIKey.

Creating the Report

To create a report we need to pass some required parameters.

ParametersIntervalStart
ParametersIntervalEnd

To create a report we can also pass some optional parameters.

ParametersColumns
ParametersCurrency

//  This first creates the new Report and displays it. Report Creation takes time once it is created will display the report.
SELECT * FROM PayoutsSummaryReport WHERE ParametersIntervalStart = '2020-12-27' AND ParametersIntervalEnd = '2020-12-28'

Select

To query the report we can try the below queries.

SELECT * FROM PayoutsSummaryReport WHERE Id IN (SELECT Id FROM Reports WHERE report_type = 'payouts.summary.1')
SELECT * FROM PayoutsSummaryReport WHERE Id IN ('frr_1I54dkATXQzBWNrlnaavpHGe', 'frr_1I3I59ATXQzBWNrl9VcczrDY') // This will show multiple reports
SELECT * FROM PayoutsSummaryReport WHERE Id = 'frr_1I480mATXQzBWNrlYQRaLQ9x' // This will show a respective report

Columns


Name	Type	References	Description
Reporting_Category	String		Reporting Category is a new categorization of balance transactions, meant to improve on the current type field.
Currency	String		Three-letter ISO code for the currency in which gross, fee and net are defined.
Count	Int		The number of transactions associated with the reporting_category.
Gross	Decimal		Sum of the gross amounts of the transactions associated with the reporting_category. Expressed in major units of the currency (e.g. dollars for USD, yen for JPY).
Fee	Decimal		Sum of the fees paid for the transactions associated with the reporting_category. Expressed in major units of the currency (e.g. dollars for USD, yen for JPY).
Net	Decimal		Sum of the net amounts for the transactions associated with the reporting_category. Expressed in major units of the currency (e.g. dollars for USD, yen for JPY).
Id	String	Reports.Id	Unique identifier for the reports run object.
ParametersIntervalEnd	Datetime		Ending timestamp of data to be included in the report run (exclusive).
ParametersIntervalStart	Datetime		Starting timestamp of data to be included in the report run.
ParametersColumns	String		The set of output columns requested for inclusion in the report run.
ParametersCurrency	String		Currency of objects to be included in the report run.

PendingBalance

Query the available balance in Stripe.

Table Specific Information

Select

The provider supports the use of all columns as criteria in the WHERE clause of SELECT statements, as long as SupportEnhancedSQL is set to True.Otherwise Stripe does not allow any columns to be used in the WHERE clause in queries to this view.

SELECT * FROM PendingBalance

Columns


Name	Type	References	Description
Currency	String		The currency of the balance.
Amount	Integer		The pending amount.
SourceTypesAggregate	String		The source cards.
SourceTypesCard	Integer		The source cards.
SourceTypesBankAccount	Integer		The source Bank Account.
SourceTypesBitcoinReceiver	Integer		The source Bitcoin Receiver.

Pseudo-Columns

SELECT ステートメントのWHERE 句では、疑似カラムフィールドを使用して、データソースから返されるタプルを詳細に制御することができます。


Name	Type	Description
AccountId	String		The Id of the connected account to get pending balance for.

Reports

To Create and Query the Report Run object, which represents an instance of a report type generated with specific run parameters.

Table Specific Information

Reports can be used to query all the reports or a specific report.

Note: It requires a live-mode API key which you can set using the LiveAPIKey connection property. The view is not visible without mentioning the LiveAPIKey.

Select

Server-Side Query Support

The Sync App uses the Stripe API to filter the results by the following columns and operators while the rest of the filter is executed client-side within the Sync App.

Id supports the following operators: =,IN.

SELECT * FROM Reports WHERE Id = 'frr_1I480mATXQzBWNrlYQRaLQ9x'
SELECT * FROM Reports WHERE Id IN ('frr_1I14hXATXQzBWNrlGP5pSxd9', 'frr_1I14h9ATXQzBWNrlEG32QcPH')

Columns


Name	Type	References	Description
Id [KEY]	String		Unique identifier for the object.
Created	Datetime		Time at which the object was created. Measured in seconds since the Unix epoch.
Error	String		If something should go wrong during the run, a message about the failure (populated when status=failed).
Livemode	Boolean		Always true: reports can only be run on live-mode data
Object	String		String representing the objects type. Objects of the same type share the same value.
ParametersIntervalEnd	Datetime		Ending timestamp of data to be included in the report run (exclusive).
ParametersIntervalStart	Datetime		Starting timestamp of data to be included in the report run.
ParametersColumns	String		The set of output columns requested for inclusion in the report run.
ParametersConnectedAccount	String		Connected account ID by which to filter the report run.
ParametersCurrency	String		Currency of objects to be included in the report run.
ParametersPayout	String	Payouts.Id	Payout ID by which to filter the report run.
ParametersReportingCategory	String		Category of balance transactions to be included in the report run.
ParametersTimezone	String		Defaults to Etc/UTC. The output timezone for all timestamps in the report.
Report_type	String		The ID of the report type to run, such as balance.summary.1 使用できる値は次のとおりです。balance_change_from_activity.itemized.1, balance_change_from_activity.itemized.2, balance_change_from_activity.itemized.3, balance_change_from_activity.summary.1, payouts.itemized.1, payouts.itemized.2, payouts.itemized.3, payouts.summary.1, balance.summary.1, ending_balance_reconciliation.itemized.1, ending_balance_reconciliation.itemized.2, ending_balance_reconciliation.itemized.3, ending_balance_reconciliation.summary.1, ending_balance_reconciliation.itemized.4, payout_reconciliation.by_id.itemized.1, payout_reconciliation.by_id.itemized.2, payout_reconciliation.by_id.itemized.3, payout_reconciliation.by_id.itemized.4, payout_reconciliation.by_id.summary.1, payout_reconciliation.itemized.1, payout_reconciliation.itemized.2, payout_reconciliation.itemized.3, payout_reconciliation.itemized.4, payout_reconciliation.summary.1, payout_reconciliation.itemized.5
ResultCreated	Datetime		Time at which the object was created. Measured in seconds since the Unix epoch.
ResultExpiresAt	Datetime		The time at which the file expires and is no longer available in epoch seconds.
ResultFilename	String		A filename for the file, suitable for saving to a filesystem.
ResultId	String		Unique identifier for the object.
ResultLinksHas_more	Boolean		True if this list has another page of items after this one that can be fetched.
ResultLinksObject	String		String representing the objects type. Objects of the same type share the same value. Always has the value list.
ResultLinksUrl	String		The URL where this list can be accessed.
ResultObject	String		String representing the objects type. Objects of the same type share the same value.
ResultPurpose	String		The purpose of the uploaded file. 使用できる値は次のとおりです。account_requirement, additional_verification, business_icon, business_logo, customer_signature, dispute_evidence, identity_document, pci_document, tax_document_user_upload
ResultSize	Integer		The size in bytes of the file object.
ResultTitle	String		A user friendly title for the document.
ResultType	String		The type of the file returned (e.g., csv, pdf, jpg, or png).
ResultUrl	String		The URL from which the file can be downloaded using your live secret API key.
Status	String		Status of this report run. This will be pending when the run is initially created. When the run finishes, this will be set to succeeded and the result field will be populated. Rarely, we may encounter an error, at which point this will be set to failed and the error field will be populated.
Succeeded_at	Timestamp		Timestamp at which this run successfully finished (populated when status=succeeded). Measured in seconds since the Unix epoch.
ResultLinksDataAggregate	String		Details about each object of Result Links.

Reviews

Queries the reviews.

Table Specific Information

Select

The Sync App uses the Stripe API to filter the results by the following columns and operators:

Id and AccountId supports the following operator: =.
Created supports the following operators: >,>=,<,<=,=.

The rest of the filter is executed client-side within the Sync App.

The provider supports the use of all columns as criteria in the WHERE clause of SELECT statements, as long as SupportEnhancedSQL is set to True. If the SupportEnhancedSQL property is set to False, you still can retrieve:

SELECT * FROM Reviews
SELECT * FROM Reviews WHERE Id = '123321'
SELECT * FROM Reviews WHERE Created >= '2023-07-14T05:36:46.000-04:00'

Columns


Name	Type	References	Description
Id [KEY]	String		The Id of the reviews.
BillingZip	String		The ZIP or postal code of the card used, if applicable.
Charge	String		The charge associated with this review.
ClosedReason	String		The reason the review was closed, or null if it has not yet been closed.
Created	Datetime		Time at which the object was created. Measured in seconds since the Unix epoch.
IpAddress	String		The IP address where the payment originated.
IpAddressLocation	String		Information related to the location of the payment.
Livemode	Boolean		true if the object exists in live mode andfalse if in test mode.
Open	Boolean		If true, the review needs action.
OpenedReason	String		The reason the review was opened. Either rule or manual.
PaymentIntent	String		The PaymentIntent ID associated with this review, if one exists.
Reason	String		The reason the review is currently open or closed. Possible values are rule, manual, approved, refunded, refunded_as_fraud, disputed, or redacted.
Session	String		Information related to the browsing session of the user who initiated the payment.

Pseudo-Columns

SELECT ステートメントのWHERE 句では、疑似カラムフィールドを使用して、データソースから返されるタプルを詳細に制御することができます。


Name	Type	Description
AccountId	String		The Id of the connected account to be reviewed.

SetupAttempts

Returns a list of SetupAttempts that associate with a provided SetupIntent.

Table Specific Information

Select

Server-Side Query Support

The Sync App uses the Stripe API to filter the results by the following columns and operators while the rest of the filter is executed client-side within the Sync App.

Id support the following operator: =.
SetupIntent support the following operator: =.

The provider supports the use of all columns as criteria in the WHERE clause of SELECT statements, as long as SupportEnhancedSQL is set to True. If SupportEnhancedSQL property is set to False, you still can retrieve:

To query the SetupAttempts we can try the below queries.

SELECT * FROM SetupAttempts

SELECT * FROM SetupAttempts where setupintent = 'seti_1Ogg5h2eZvKYlo2CRdyp2Ggk'

Columns


Name	Type	References	Description
Id [KEY]	String		Unique identifier for the object.
Object	String		String representing the objects type. Objects of the same type share the same value.
Application	String		The value of application on the SetupIntent at the time of this confirmation.
AttachToSelf	Boolean		If present, the SetupIntents payment method will be attached to the in-context Stripe Account.
Created	Datetime		Time at which the object was created. Measured in seconds since the Unix epoch.
Customer	String		The value of customer on the SetupIntent at the time of this confirmation.
FlowDirections	String		Indicates the directions of money movement for which this payment method is intended to be used.
Livemode	Boolean		Has the value true if the object exists in live mode or the value false if the object exists in test mode.
OnBehalfOf	String		The value of on_behalf_of on the SetupIntent at the time of this confirmation.
PaymentMethod	String		ID of the payment method used with this SetupAttempt.
PaymentMethodDetailsAcssDebit	String		If this is a acss_debit payment method, this hash contains confirmation-specific information for the acss_debit payment method.
PaymentMethodDetailsAuBecsDebit	String		If this is a au_becs_debit payment method, this hash contains confirmation-specific information for the au_becs_debit payment method.
PaymentMethodDetailsBacsDebit	String		If this is a bacs_debit payment method, this hash contains confirmation-specific information for the bacs_debit payment method.
PaymentMethodDetailsBanContactBankCode	String		Bank code of bank associated with the bank account.
PaymentMethodDetailsBanContactBankName	String		Name of the bank associated with the bank account.
PaymentMethodDetailsBanContactBIC	String		Bank Identifier Code of the bank associated with the bank account.
PaymentMethodDetailsBanContactGeneratedSepaDebit	String		The ID of the SEPA Direct Debit PaymentMethod which was generated by this SetupAttempt.
PaymentMethodDetailsBanContactGeneratedSepaDebitMandate	String		The mandate for the SEPA Direct Debit PaymentMethod which was generated by this SetupAttempt.
PaymentMethodDetailsBanContactIBanLast4	String		Last four characters of the IBAN.
PaymentMethodDetailsBanContactPreferredLanguage	String		Preferred language of the Bancontact authorization page that the customer is redirected to
PaymentMethodDetailsBanContactVerifiedName	String		Owners verified full name.
PaymentMethodDetailsBoleto	String		If this is a boleto payment method, this hash contains confirmation-specific information for the boleto payment method.
PaymentMethodDetailsCardBrand	String		Card brand.
PaymentMethodDetailsCardChecks	String		Check results by Card networks on Card address and CVC at the time of authorization
PaymentMethodDetailsCardCountry	String		Two-letter ISO code representing the country of the card.
PaymentMethodDetailsCardExpMonth	String		Two-digit number representing the cards expiration month.
PaymentMethodDetailsCardExpYear	String		Four-digit number representing the cards expiration year.
PaymentMethodDetailsCardFingerprint	String		Uniquely identifies this particular card number.
PaymentMethodDetailsCardFunding	String		Card funding type.
PaymentMethodDetailsCardLast4	String		The last four digits of the card.
PaymentMethodDetailsCardNetwork	String		Identifies which network this charge was processed on.
PaymentMethodDetailsCardThreeDSecure	String		Populated if this authorization used 3D Secure authentication.
PaymentMethodDetailsCardWallet	String		If this Card is part of a card wallet, this contains the details of the card wallet.
PaymentMethodDetailsCardPresent	String		If this is a card_present payment method, this hash contains confirmation-specific information for the card_present payment method.
PaymentMethodDetailsCashApp	String		If this is a cashapp payment method, this hash contains confirmation-specific information for the cashapp payment method.
PaymentMethodDetailsIdealBank	String		The customers bank.
PaymentMethodDetailsIdealBIC	String		The Bank Identifier Code of the customers bank.
PaymentMethodDetailsIdealGeneratedSepaDebit	String		The ID of the SEPA Direct Debit PaymentMethod which was generated by this SetupAttempt.
PaymentMethodDetailsIdealGeneratedSepaDebitMandate	String		The mandate for the SEPA Direct Debit PaymentMethod which was generated by this SetupAttempt.
PaymentMethodDetailsIdealIBanLast4	String		Last four characters of the IBAN.
PaymentMethodDetailsIdealVerifiedName	String		Owners verified full name.
PaymentMethodDetailsKlarna	String		If this is a klarna payment method, this hash contains confirmation-specific information for the klarna payment method.
PaymentMethodDetailsLink	String		If this is a link payment method, this hash contains confirmation-specific information for the link payment method
PaymentMethodDetailsPaypal	String		If this is a paypal payment method, this hash contains confirmation-specific information for the paypal payment method.
PaymentMethodDetailsSepaDebit	String		If this is a sepa_debit payment method, this hash contains confirmation-specific information for the sepa_debit payment method.
PaymentMethodDetailsSoFortBankCode	String		Bank code of bank associated with the bank account.
PaymentMethodDetailsSoFortBankName	String		Name of the bank associated with the bank account.
PaymentMethodDetailsSoFortBIC	String		Bank Identifier Code of the bank associated with the bank account.
PaymentMethodDetailsSoFortGeneratedSepaDebit	String		The ID of the SEPA Direct Debit PaymentMethod which was generated by this SetupAttempt.
PaymentMethodDetailsSoFortGeneratedSepaDebitMandate	String		The mandate for the SEPA Direct Debit PaymentMethod which was generated by this SetupAttempt.
PaymentMethodDetailsSoFortIBanLast4	String		Last four characters of the IBAN.
PaymentMethodDetailsSoFortPreferredLanguage	String		Preferred language of the Sofort authorization page that the customer is redirected to.
PaymentMethodDetailsSoFortVerifiedName	String		Owners verified full name.
PaymentMethodDetailsType	String		The type of the payment method used in the SetupIntent
PaymentMethodDetailsUsBankAccount	String		If this is a us_bank_account payment method, this hash contains confirmation-specific information for the us_bank_account payment method.
SetupErrorCode	String		For some errors that could be handled programmatically, a short string indicating the error code reported.
SetupErrorDeclineCode	String		For card errors resulting from a card issuer decline, a short string indicating the card issuers reason for the decline if they provide one.
SetupErrorDocURL	String		A URL to more information about the error code reported.
SetupErrorMessage	String		A human-readable message providing more details about the error.
SetupErrorParam	String		If the error is parameter-specific, the parameter related to the error.
SetupErrorPaymentMethod	String		The PaymentMethod object for errors returned on a request involving a PaymentMethod.
SetupErrorPaymentMethodType	String		If the error is specific to the type of payment method, the payment method type that had a problem.
SetupErrorType	String		The type of error returned.
SetupIntent	String		ID of the SetupIntent that this attempt belongs to.
Status	String		Status of this SetupAttempt
Usage	String		The value of usage on the SetupIntent at the time of this confirmation

SetupIntents

Returns a list of SetupIntents.

Table Specific Information

Select

Server-Side Query Support

The Sync App uses the Stripe API to filter the results by the following columns and operators while the rest of the filter is executed client-side within the Sync App.

Customer support the following operator: =.
PaymentMethod support the following operator: =.
AttachToSelf support the following operator: =.
Created support the following operator: =.

The provider supports the use of all columns as criteria in the WHERE clause of SELECT statements, as long as SupportEnhancedSQL is set to True. If SupportEnhancedSQL property is set to False, you still can retrieve:

To query the SetupIntents we can try the below queries.

SELECT * FROM SetupIntents

SELECT * FROM SetupIntents where Customer = 'cus_PEW7WrieLzCMkW'

Columns


Name	Type	References	Description
Id [KEY]	String		Unique identifier for the object.
AutomaticPaymentMethodsAllowRedirects	String		Controls whether this SetupIntent will accept redirect-based payment methods.
AutomaticPaymentMethodsEnabled	Boolean		Automatically calculates compatible payment methods
Application	String		ID of the Connect application that created the SetupIntent.
AttachToSelf	Boolean		If present, the SetupIntent’s payment method will be attached to the in-context Stripe Account.
CancellationReason	String		Reason for cancellation of this SetupIntent
ClientSecret	String		The client secret of this SetupIntent. Used for client-side retrieval using a publishable key.
Created	Integer		Time at which the object was created. Measured in seconds since the Unix epoch.
Customer	String		ID of the Customer this SetupIntent belongs to
Description	String		An arbitrary string attached to the object. Often useful for displaying to users.
FlowDirections	String		Indicates the directions of money movement for which this payment method is intended to be used.
LastSetupErrorCode	String		For some errors that could be handled programmatically, a short string indicating the error code reported.
LastSetupErrorDeclineCode	String		For card errors resulting from a card issuer decline, a short string indicating the card issuer’s reason for the decline if they provide one.
LastSetupErrorDocURL	String		A URL to more information about the error code reported.
LastSetupErrorMessage	String		A human-readable message providing more details about the error. For card errors, these messages can be shown to your users.
LastSetupErrorParam	String		If the error is parameter-specific, the parameter related to the error.
LastSetupErrorPaymentMethod	String		The PaymentMethod object for errors returned on a request involving a PaymentMethod.
LastSetupErrorPaymentMethodType	String		If the error is specific to the type of payment method, the payment method type that had a problem.
LastSetupErrorType	String		The type of error returned.
MetadataAggregate	String		The set of key/value pairs that you can attach to a an object.
LatestAttempt	String		The most recent SetupAttempt for this SetupIntent.
Livemode	Boolean		Has the value true if the object exists in live mode or the value false if the object exists in test mode.
Mandate	String		ID of the multi use Mandate generated by the SetupIntent.
NextAction	String		If present, this property tells you what actions you need to take in order for your customer to continue payment setup.
PaymentMethod	String		ID of the payment method used with this SetupIntent.
Status	String		Status of this SetupIntent
Usage	String		Indicates how the payment method is intended to be used in the future.
Object	String		String representing the objects type. Objects of the same type share the same value.
OnBehalfOf	String		The account (if any) for which the setup is intended.
PaymentMethodConfigurationDetailsId	String		ID of the payment method configuration used.
PaymentMethodConfigurationDetailsParent	String		ID of the parent payment method configuration used.
PaymentmethodOptions	String		Payment method-specific configuration for this SetupIntent.
PaymentMethodTypes	String		The list of payment method types (e.g. card) that this SetupIntent is allowed to set up.
SingleUseMandate	String		ID of the single_use Mandate generated by the SetupIntent.

Skus

Query the available SKUs in Stripe.

Table Specific Information

Select

Server-Side Query Support

The Sync App uses the Stripe API to filter the results by the following columns and operators while the rest of the filter is executed client-side within the Sync App.

Id and ProductId support the following operators: IN,=.
Active support the following operator: =.

The provider supports the use of all columns as criteria in the WHERE clause of SELECT statements, as long as SupportEnhancedSQL is set to True. If SupportEnhancedSQL property is set to False, you still can retrieve:

-a SKU by specifying its Id:

SELECT * FROM Skus WHERE Id = '12345678'

-a SKU by specifying its Ids:

SELECT * FROM Skus WHERE Id IN ('12345678', '123456789', '123456788')

-Skus of a Product:

SELECT * FROM Skus WHERE Product = 'pd_12345678'

-Active Skus:

SELECT * FROM Skus WHERE Active = 'true'

Columns


Name	Type	References	Description
Id [KEY]	String		Id of SKU.
Active	Boolean		Whether or not the SKU is available for purchase.
AttributesAggregate	String		A dictionary of attributes and values for the attributes defined by the product.
Created	Datetime		The time when SKU is created.
Currency	String		3-letter ISO code for currency.
Images	String		The URL of an image for this SKU, meant to be displayable to the customer.
InventoryQuantity	Double		Quantity of the SKU's inventory.
InventoryType	String		Type of the SKU's inventory.
InventoryValue	String		Value of the SKU's inventory.
PackageDimensionsHeight	Double		The height dimension of this Sku for shipping purposes.
PackageDimensionsLength	Double		The length dimension of this Sku for shipping purposes.
PackageDimensionsWeight	Double		The weight dimension of this Sku for shipping purposes.
PackageDimensionsWidth	Double		The width dimension of this Sku for shipping purposes.
Price	Integer		The cost of the item as a positive integer in the smallest currency unit.
ProductId	String		The Id of the product this SKU is associated with. The product must be currently active.
Updated	Datetime		The last updated time.
Metadata	String		Set of key-value pairs that you can attach to an object. This can be useful for storing additional information about the object in a structured format.
Livemode	Boolean		Has the value true if the object exists in live mode or the value false if the object exists in test mode.
Object	String		String representing the object's type. Objects of the same type share the same value.

Pseudo-Columns

SELECT ステートメントのWHERE 句では、疑似カラムフィールドを使用して、データソースから返されるタプルを詳細に制御することができます。


Name	Type	Description
InStock	Boolean		if the SKUs is either in stock or out of stock
AccountId	String		The Id of the connected account to get SKUs for.

SubscriptionSchedules

Retrieves the list of your subscription schedules.

Table Specific Information

Select

Server-Side Query Support

The Sync App uses the Stripe API to filter the results by the following columns and operators while the rest of the filter is executed client-side within the Sync App.

Customer support the following operator: =.
CanceledAt support the following operator: =.
CompletedAt support the following operator: =.
Created support the following operator: =.
ReleasedAt support the following operator: =.

The provider supports the use of all columns as criteria in the WHERE clause of SELECT statements, as long as SupportEnhancedSQL is set to True. If SupportEnhancedSQL property is set to False, you still can retrieve:

To query the SubscriptionSchedules we can try the below queries.

SELECT * from SubscriptionSchedules

SELECT * from SubscriptionSchedules where Created = '2024-01-18 02:16:47.0'

Columns


Name	Type	References	Description
Id [KEY]	String		Unique identifier for the object.
Application	String		ID of the Connect Application that created the schedule.
CanceledAt	Datetime		Time at which the subscription schedule was canceled. Measured in seconds since the Unix epoch.
CompletedAt	Datetime		Time at which the subscription schedule was completed. Measured in seconds since the Unix epoch.
Created	Datetime		Time at which the object was created. Measured in seconds since the Unix epoch.
CurrentPhaseEndDate	Datetime		The end of this phase of the subscription schedule.
CurrentPhaseStartDate	Datetime		The start of this phase of the subscription schedule.
Customer	String		ID of the customer who owns the subscription schedule.
MetadataAggregate	String		The set of key/value pairs that you can attach to a an object.
Phases	String		Configuration for the subscription schedules phases.
Status	String		The present status of the subscription schedule.
Subscription	String		ID of the subscription managed by the subscription schedule.
Object	String		String representing the objects type. Objects of the same type share the same value.
DefaultSettingsApplicationFeePercent	Decimal		A non-negative decimal between 0 and 100, with at most two decimal places.
DefaultSettingsAutomaticTaxEnabled	Boolean		Whether Stripe automatically computes tax on invoices created during this phase.
DefaultSettingsAutomaticTaxLiability	String		The account thats liable for tax.
DefaultSettingsBillingCycleAnchor	String		Possible values are phase_start or automatic.
DefaultSettingsBillingThresholds	String		Define thresholds at which an invoice will be sent, and the subscription advanced to a new billing period
DefaultSettingsCollectionMethod	String		Either charge_automatically, or send_invoice.
DefaultSettingsDefaultPaymentMethod	String		ID of the default payment method for the subscription schedule.
DefaultSettingsDescription	String		Subscription description, meant to be displayable to the customer.
DefaultSettingsInvoiceSettings	String		The subscription schedules default invoice settings.
DefaultSettingsOnBehalfOf	String		The account (if any) the charge was made on behalf of for charges associated with the schedules subscription.
DefaultSettingsTransferData	String		The account (if any) the associated subscriptions payments will be attributed to for tax reporting, and where funds from each payment will be transferred to for each of the subscriptions invoices.
EndBehavior	String		Behavior of the subscription schedule and underlying subscription when it ends.
Livemode	Boolean		Has the value true if the object exists in live mode or the value false if the object exists in test mode.
ReleasedAt	Datetime		Time at which the subscription schedule was released. Measured in seconds since the Unix epoch.
ReleasedSubscription	String		ID of the subscription once managed by the subscription schedule (if it is released).
TestClock	String		ID of the test clock this subscription schedule belongs to.

Transactions

Returns a list of Issuing Transaction objects. The objects are sorted in descending order by creation date, with the most recently created object appearing first.

Table Specific Information

Select

Server-Side Query Support

The Sync App uses the Stripe API to filter the results by the following columns and operators while the rest of the filter is executed client-side within the Sync App.

Id support the following operator: =.
Card support the following operator: =.
Cardholder support the following operator: =.
Type support the following operator: =.
Created support the following operator: =.

The provider supports the use of all columns as criteria in the WHERE clause of SELECT statements, as long as SupportEnhancedSQL is set to True. If SupportEnhancedSQL property is set to False, you still can retrieve:

To query the Transactions we can try the below queries.

SELECT * from Transactions

SELECT * from Transactions where id = 'ipi_1ODMLL2eZvKYlo2CoarGZSSp'

Columns


Name	Type	References	Description
Id [KEY]	String		Unique identifier for the object.
Amount	Integer		The transaction amount, which will be reflected in your balance.
AmountDetailsAtmFee	Integer		The fee charged by the ATM for the cash withdrawal.
AmountDetailsCashbackAmount	Integer		The amount of cash requested by the cardholder.
Authorization	String		The Authorization object that led to this transaction.
BalanceTransaction	String		Balance transaction that describes the impact on your account balance.
Card	String		The card used to make this transaction.
Cardholder	String		The cardholder to whom this transaction belongs.
Currency	String		Three-letter ISO currency code, in lowercase. Must be a supported currency.
MetadataAggregate	String		The set of key/value pairs that you can attach to a an object.
Type	String		The nature of the transaction.
Created	Datetime		Time at which the object was created. Measured in seconds since the Unix epoch.
Dispute	String		If youve disputed the transaction, the ID of the dispute.
Livemode	Boolean		Has the value true if the object exists in live mode or the value false if the object exists in test mode.
MerchantAmount	Integer		The amount that the merchant will receive, denominated in merchant_currency and in the smallest currency unit
MerchantCurrency	String		The currency with which the merchant is taking payment.
MerchantDataCategory	String		A categorization of the seller’s type of business.
MerchantDataCategoryCode	String		The merchant category code for the sellers business
MerchantDataCity	String		City where the seller is located
MerchantDataCountry	String		Country where the seller is located
MerchantDataName	String		Name of the seller
MerchantDataNetworkId	String		Identifier assigned to the seller by the card network.
MerchantDataPostalCode	String		Postal code where the seller is located
MerchantDataState	String		State where the seller is located
MerchantDataTerminalId	String		An ID assigned by the seller to the location of the sale.
MerchantDataURL	String		URL provided by the merchant on a 3DS request
NetworkDataAuthorizationCode	String		A code created by Stripe which is shared with the merchant to validate the authorization.
NetworkDataProcessingDate	String		The date the transaction was processed by the card network.
NetworkDataTransactionId	String		Unique identifier for the authorization assigned by the card network used to match subsequent messages, disputes, and transactions.
PurchaseDetailsFlight	String		Information about the flight that was purchased with this transaction.
PurchaseDetailsFuel	String		Information about fuel that was purchased with this transaction.
PurchaseDetailsLodging	String		Information about lodging that was purchased with this transaction.
PurchaseDetailsReceipt	String		The line items in the purchase.
PurchaseDetailsReference	String		A merchant-specific order number.
Token	String		Token object used for this transaction.
Wallet	String		The digital wallet used for this transaction.

Pseudo-Columns

SELECT ステートメントのWHERE 句では、疑似カラムフィールドを使用して、データソースから返されるタプルを詳細に制御することができます。


Name	Type	Description
AccountId	String		The Id of the connected account to get files for.

接続文字列オプション

接続文字列プロパティは、接続を確立するために使用できるさまざまなオプションです。このセクションでは、本プロバイダーの接続文字列で設定できるオプションの一覧を示します。詳細については各リンクをクリックしてください。

接続を確立する方法について詳しくは、接続の確立を参照してください。

Authentication

プロパティ	説明
AuthScheme	The type of authentication to use when connecting to Stripe.

OAuth

プロパティ	説明
OAuthClientId	OAuth 認証サーバーを使用してアプリケーションを登録する場合に割り当てられたクライアントId。
OAuthClientSecret	OAuth 認証サーバーにアプリケーションを登録する場合に割り当てられたクライアントシークレット。
OAuthAccessToken	OAuth を使用して接続するためのアクセストークン。

SSL

プロパティ	説明
SSLServerCert	TLS/SSL を使用して接続するときに、サーバーが受け入れ可能な証明書。

Firewall

プロパティ	説明
FirewallType	プロキシベースのファイアウォールで使われるプロトコル。
FirewallServer	プロキシベースのファイアウォールの名前もしくはIP アドレス。
FirewallPort	プロキシベースのファイアウォールのTCP ポート。
FirewallUser	プロキシベースのファイアウォールに認証するために使うユーザー名。
FirewallPassword	プロキシベースのファイアウォールへの認証に使われるパスワード。

Proxy

プロパティ	説明
ProxyAutoDetect	これは、システムプロキシ設定を使用するかどうかを示します。
ProxyServer	HTTP トラフィックをルートするためのプロキシのホストネームもしくはIP アドレス。
ProxyPort	ProxyServer プロキシが起動しているTCP ポート。
ProxyAuthScheme	ProxyServer プロキシへの認証で使われる認証タイプ。
ProxyUser	ProxyServer プロキシへの認証に使われるユーザー名。
ProxyPassword	ProxyServer プロキシへの認証に使われるパスワード。
ProxySSLType	ProxyServer プロキシへの接続時に使用するSSL タイプ。
ProxyExceptions	ProxyServer 経由での接続が免除される宛先ホスト名またはIP のセミコロン区切りのリスト。

Logging

プロパティ	説明
LogModules	ログファイルに含めるコアモジュール。

Schema

プロパティ	説明
Location	テーブル、ビュー、およびストアドプロシージャを定義するスキーマファイルを格納するディレクトリへのパス。
BrowsableSchemas	このプロパティは、使用可能なスキーマのサブセットにレポートされるスキーマを制限します。例えば、BrowsableSchemas=SchemaA,SchemaB,SchemaC です。
Tables	このプロパティは、使用可能なテーブルのサブセットにレポートされるテーブルを制限します。例えば、Tables=TableA,TableB,TableC です。
Views	使用可能なテーブルのサブセットにレポートされるビューを制限します。例えば、Views=ViewA,ViewB,ViewC です。

Miscellaneous

プロパティ	説明
AccountId	The ID of the Account that you want to use.
LiveAPIKey	LiveAPIKey is required to generate and view the Reports.
MaxRows	クエリで集計またはGROUP BY を使用しない場合に返される行数を制限します。これはLIMIT 句よりも優先されます。
Other	これらの隠しプロパティは特定のユースケースでのみ使用されます。
PseudoColumns	このプロパティは、テーブルのカラムとして疑似カラムが含まれているかどうかを示します。
Timeout	タイムアウトエラーがスローされ、処理をキャンセルするまでの秒数。
UserDefinedViews	カスタムビューを含むJSON コンフィギュレーションファイルを指すファイルパス。

Authentication

このセクションでは、本プロバイダーの接続文字列で設定可能なAuthentication プロパティの全リストを提供します。

プロパティ	説明
AuthScheme	The type of authentication to use when connecting to Stripe.

AuthScheme

The type of authentication to use when connecting to Stripe.

解説

Auto: Lets the driver decide automatically based on the other connection properties you have set.
APIKey: Set to this to perform APIKey authentication.
OAuth: Set to this to perform OAuth authentication.

OAuth

このセクションでは、本プロバイダーの接続文字列で設定可能なOAuth プロパティの全リストを提供します。

プロパティ	説明
OAuthClientId	OAuth 認証サーバーを使用してアプリケーションを登録する場合に割り当てられたクライアントId。
OAuthClientSecret	OAuth 認証サーバーにアプリケーションを登録する場合に割り当てられたクライアントシークレット。
OAuthAccessToken	OAuth を使用して接続するためのアクセストークン。

OAuthClientId

OAuth 認証サーバーを使用してアプリケーションを登録する場合に割り当てられたクライアントId。

解説

OAuth アプリケーションの登録の一環として、コンシューマキーとも呼ばれるOAuthClientId 値、およびクライアントシークレットOAuthClientSecret が提供されます。

OAuthClientSecret

OAuth 認証サーバーにアプリケーションを登録する場合に割り当てられたクライアントシークレット。

解説

OAuth アプリケーションの登録の一環として、コンシューマキーとも呼ばれるOAuthClientId が提供されます。また、コンシューマーシークレットと呼ばれるクライアントシークレットも提供されます。クライアントシークレットをOAuthClientSecret プロパティに設定します。

OAuthAccessToken

OAuth を使用して接続するためのアクセストークン。

解説

OAuth を使用して接続するには、OAuthAccessToken プロパティが使用されます。認証プロセスにおいてOAuth サーバーからOAuthAccessToken が取得されます。このプロパティは、サーバーに依存するタイムアウトがあり、要求の間で再利用することができます。

アクセストークンは、ユーザー名とパスワードの代わりに使用されます。サーバー上で維持することで、認証情報が保護されます。

SSL

このセクションでは、本プロバイダーの接続文字列で設定可能なSSL プロパティの全リストを提供します。

プロパティ	説明
SSLServerCert	TLS/SSL を使用して接続するときに、サーバーが受け入れ可能な証明書。

SSLServerCert

TLS/SSL を使用して接続するときに、サーバーが受け入れ可能な証明書。

解説

TLS/SSL 接続を使用する場合は、このプロパティを使用して、サーバーが受け入れるTLS/SSL 証明書を指定できます。コンピュータによって信頼されていない他の証明書はすべて拒否されます。

このプロパティは、次のフォームを取ります：


説明	例
フルPEM 証明書（例では省略されています）	-----BEGIN CERTIFICATE----- MIIChTCCAe4CAQAwDQYJKoZIhv......Qw== -----END CERTIFICATE-----
証明書を保有するローカルファイルへのパス。	C:\cert.cer
公開鍵（例では省略されています）	-----BEGIN RSA PUBLIC KEY----- MIGfMA0GCSq......AQAB -----END RSA PUBLIC KEY-----
MD5 Thumbprint （hex 値はスペースおよびコロン区切り）	ecadbdda5a1529c58a1e9e09828d70e4
SHA1 Thumbprint （hex 値はスペースおよびコロン区切り）	34a929226ae0819f2ec14b4a3d904f801cbb150d

これを指定しない場合は、マシンが信用するすべての証明書が受け入れられます。

すべての証明書の受け入れを示すには、'*'を使用します。セキュリティ上の理由から、これはお勧めできません。

Firewall

このセクションでは、本プロバイダーの接続文字列で設定可能なFirewall プロパティの全リストを提供します。

プロパティ	説明
FirewallType	プロキシベースのファイアウォールで使われるプロトコル。
FirewallServer	プロキシベースのファイアウォールの名前もしくはIP アドレス。
FirewallPort	プロキシベースのファイアウォールのTCP ポート。
FirewallUser	プロキシベースのファイアウォールに認証するために使うユーザー名。
FirewallPassword	プロキシベースのファイアウォールへの認証に使われるパスワード。

FirewallType

プロキシベースのファイアウォールで使われるプロトコル。

解説

このプロパティは、Sync App がFirewallServer プロキシ経由でトンネルトラフィックを使うためのプロトコルを指定します。デフォルトでは、Sync App はシステムプロキシに接続します。この動作を無効化し次のプロキシタイプのどれかで接続するには、ProxyAutoDetect をfalse に設定します。


タイプ	デフォルトポート	説明
TUNNEL	80	これが設定されている場合、Sync App はStripe への接続を開き、プロキシを経由して通信が行われます。
SOCKS4	1080	これが設定されている場合、Sync App はデータをFirewallServer およびFirewallPort で指定されたSOCS 4 プロキシ経由で送信し、接続リクエストが許容されるかどうかを決定します。
SOCKS5	1080	これが設定されている場合、Sync App はデータをFirewallServer およびFirewallPort で指定されたSOCS 5 プロキシ経由で送信します。プロキシに認証が必要な場合には、FirewallUser およびFirewallPassword をプロキシが認識する認証情報に設定します。

HTTP プロキシへの接続には、ProxyServer およびProxyPort ポートを使ってください。HTTP プロキシへの認証には、ProxyAuthScheme、ProxyUser、およびProxyPassword を使ってください。

FirewallServer

プロキシベースのファイアウォールの名前もしくはIP アドレス。

解説

ファイアウォールトラバーサルを許容するために設定するIP アドレス、DNS 名、もしくはプロキシホスト名を指定するプロパティです。プロトコルはFirewallType で指定されます。このプロパティとFirewallServer を使って、SOCKS 経由での接続、もしくはトンネリングが可能です。HTTP プロキシへの接続には、ProxyServer を使用します。

Sync App はデフォルトでシステムプロキシを使うので注意してください。他のプロキシを使う場合には、ProxyAutoDetect をfalse に設定してください。

FirewallPort

プロキシベースのファイアウォールのTCP ポート。

解説

ファイアウォールトラバーサルを許容するために設定するプロキシベースのファイアウォールのTCP ポート。名前もしくはIP アドレスを指定するには、FirewallServer を使います。FirewallType でプロトコルを指定します。

FirewallUser

プロキシベースのファイアウォールに認証するために使うユーザー名。

解説

FirewallUser およびFirewallPassword プロパティは、FirewallType により指定された認証方式に則り、FirewallServer、およびFirewallPort で指定されたプロキシに対しての認証に使われます。

FirewallPassword

プロキシベースのファイアウォールへの認証に使われるパスワード。

解説

このプロパティは、FirewallType により指定された認証メソッドに則り、FirewallServer およびFirewallPort で指定されたプロキシに渡されます。

Proxy

このセクションでは、本プロバイダーの接続文字列で設定可能なProxy プロパティの全リストを提供します。

プロパティ	説明
ProxyAutoDetect	これは、システムプロキシ設定を使用するかどうかを示します。
ProxyServer	HTTP トラフィックをルートするためのプロキシのホストネームもしくはIP アドレス。
ProxyPort	ProxyServer プロキシが起動しているTCP ポート。
ProxyAuthScheme	ProxyServer プロキシへの認証で使われる認証タイプ。
ProxyUser	ProxyServer プロキシへの認証に使われるユーザー名。
ProxyPassword	ProxyServer プロキシへの認証に使われるパスワード。
ProxySSLType	ProxyServer プロキシへの接続時に使用するSSL タイプ。
ProxyExceptions	ProxyServer 経由での接続が免除される宛先ホスト名またはIP のセミコロン区切りのリスト。

ProxyAutoDetect

これは、システムプロキシ設定を使用するかどうかを示します。

解説

これは他のプロキシ設定よりも優先されるため、カスタムプロキシ設定を使用するにはProxyAutoDetect をFALSE に設定する必要があります。

HTTP プロキシへの接続には、ProxyServer を参照してください。SOCKS やトンネリングなどの他のプロキシには、FirewallType を参照してください。

ProxyServer

HTTP トラフィックをルートするためのプロキシのホストネームもしくはIP アドレス。

解説

HTTP トラフィックをルートするためのプロキシのホストネームもしくはIP アドレス。HTTP プロキシへの認証には、Sync App はHTTP、Windows(NTLM)、もしくはKerberos 認証タイプを使用することができます。

SOCKS プロキシを経由して接続する、もしくは接続をトンネルするには、FirewallType を参照してください。

デフォルトで、Sync App はsystem プロキシを使います。他のプロキシを使う場合には、ProxyAutoDetect をfalse に設定します。

ProxyPort

ProxyServer プロキシが起動しているTCP ポート。

解説

HTTP トラフィックをリダイレクトするHTTP プロキシが実行されているポート。ProxyServer でHTTP プロキシを指定します。その他のプロキシタイプについては、FirewallType を参照してください。

ProxyAuthScheme

ProxyServer プロキシへの認証で使われる認証タイプ。

解説

この値は、ProxyServer およびProxyPort で指定されるHTTP プロキシに認証するために使われる認証タイプを指定します。

Sync App は、デフォルトでsystem proxy settings を使い、追加での設定が不要です。他のプロキシへの接続をする場合には、ProxyServer およびProxyPort に加え、ProxyAutoDetect をfalse に設定します。認証するには、ProxyAuthScheme を設定し、必要な場合にはProxyUser およびProxyPassword を設定します。

認証タイプは、次のどれかになります。

BASIC： Sync App はHTTP BASIC 認証を行います。
DIGEST： Sync App はHTTP DIGEST 認証を行います。
NEGOTIATE： Sync App は認証において有効なプロトコルに応じて、NTLM もしくはKerberos トークンを取得します。
PROPRIETARY： Sync App はNTLM もしくはKerberos トークンを発行しません。このトークンを、HTTP リクエストのAuthorization ヘッダーに含める必要があります。

SOCKS 5 認証のような他の認証タイプを使用するには、FirewallType を参照してください。

ProxyUser

ProxyServer プロキシへの認証に使われるユーザー名。

解説

ProxyUser および ProxyPassword オプションは、ProxyServer で指定されたHTTP プロキシに対して接続および認証するために使用されます。

ProxyAuthScheme で使用可能な認証タイプを選択することができます。HTTP 認証を使う場合、これをHTTP プロキシで識別可能なユーザーのユーザー名に設定します。Windows もしくはKerberos 認証を使用する場合、このプロパティを次の形式のどれかでユーザー名に設定します。

user@domain
domain\user

ProxyPassword

ProxyServer プロキシへの認証に使われるパスワード。

解説

このプロパティは、NTLM(Windows)、Kerberos、もしくはHTTP 認証をサポートするHTTP プロキシサーバーに認証するために使われます。HTTP プロキシを指定するためには、ProxyServer およびProxyPort を設定します。認証タイプを指定するためにはProxyAuthScheme を設定します。

HTTP 認証を使う場合、さらにHTTP プロキシにProxyUser およびProxyPassword を設定します。

NTLM 認証を使う場合、Windows パスワードにProxyUser およびProxyPassword を設定します。Kerberos 認証には、これらを入力する必要があります。

SOCKS 5 認証もしくは、トンネリングは、FirewallType を参照してください。

デフォルトで、Sync App はsystem プロキシを使います。他のプロキシに接続する場合には、これをfalse に設定します。

ProxySSLType

ProxyServer プロキシへの接続時に使用するSSL タイプ。

解説

このプロパティは、ProxyServer で指定されたHTTP プロキシへの接続にSSL を使用するかどうかを決定します。この値は、AUTO、ALWAYS、NEVER、TUNNEL のいずれかです。有効な値は次のとおりです。


AUTO	デフォルト設定。URL がHTTPS URL の場合、Sync App は、TUNNEL オプションを使います。URL がHTTP URL の場合、コンポーネントはNEVER オプションを使います。
ALWAYS	接続は、常にSSL 有効となります。
NEVER	接続は、SSL 有効になりません。
TUNNEL	接続は、トンネリングプロキシを経由します。プロキシサーバーがリモートホストへの接続を開き、プロキシを経由して通信が行われます。

ProxyExceptions

ProxyServer 経由での接続が免除される宛先ホスト名またはIP のセミコロン区切りのリスト。

解説

ProxyServer は、このプロパティで定義されたアドレスを除くすべてのアドレスに使用されます。セミコロンを使用してエントリを区切ります。

Sync App は、追加設定なしにデフォルトでシステムのプロキシ設定を使います。この接続のプロキシ例外を明示的に構成するには、ProxyAutoDetect をfalse に設定して、ProxyServer およびProxyPort を設定する必要があります。認証するには、ProxyAuthScheme を設定し、必要な場合にはProxyUser およびProxyPassword を設定します。

Logging

このセクションでは、本プロバイダーの接続文字列で設定可能なLogging プロパティの全リストを提供します。

プロパティ	説明
LogModules	ログファイルに含めるコアモジュール。

LogModules

ログファイルに含めるコアモジュール。

解説

指定された（';' で区切られた）モジュールのみがログファイルに含まれます。デフォルトではすべてのモジュールが含まれます。

概要はログページを参照してください。

Schema

このセクションでは、本プロバイダーの接続文字列で設定可能なSchema プロパティの全リストを提供します。

プロパティ	説明
Location	テーブル、ビュー、およびストアドプロシージャを定義するスキーマファイルを格納するディレクトリへのパス。
BrowsableSchemas	このプロパティは、使用可能なスキーマのサブセットにレポートされるスキーマを制限します。例えば、BrowsableSchemas=SchemaA,SchemaB,SchemaC です。
Tables	このプロパティは、使用可能なテーブルのサブセットにレポートされるテーブルを制限します。例えば、Tables=TableA,TableB,TableC です。
Views	使用可能なテーブルのサブセットにレポートされるビューを制限します。例えば、Views=ViewA,ViewB,ViewC です。

Location

テーブル、ビュー、およびストアドプロシージャを定義するスキーマファイルを格納するディレクトリへのパス。

解説

Sync App のスキーマファイル（テーブルとビューの場合は.rsd ファイル、ストアドプロシージャの場合は.rsb ファイル）を含むディレクトリへのパス。このフォルダの場所は、実行ファイルの場所からの相対パスにすることができます。Location プロパティは、定義をカスタマイズしたり（例えば、カラム名を変更する、カラムを無視するなど）、新しいテーブル、ビュー、またはストアドプロシージャでデータモデルを拡張する場合にのみ必要です。

指定しない場合、デフォルトの場所は"%APPDATA%\\CData\\Stripe Data Provider\\Schema" となり、%APPDATA% はユーザーのコンフィギュレーションディレクトリに設定されます：


Platform	%APPDATA%
Windows	APPDATA 環境変数の値
Linux	~/.config

BrowsableSchemas

このプロパティは、使用可能なスキーマのサブセットにレポートされるスキーマを制限します。例えば、BrowsableSchemas=SchemaA,SchemaB,SchemaC です。

解説

スキーマをデータベースからリストすると、負荷がかかる可能性があります。接続文字列でスキーマのリストを提供すると、パフォーマンスが向上します。

Tables

このプロパティは、使用可能なテーブルのサブセットにレポートされるテーブルを制限します。例えば、Tables=TableA,TableB,TableC です。

解説

テーブルを複数のデータベースからリストすると、負荷がかかる可能性があります。接続文字列でテーブルのリストを提供すると、Sync App のパフォーマンスが向上します。

このプロパティは、作業したいビューがすでにわかっていて、ビューが多すぎる場合に、ビューを自動的にリストする代わりに使用することもできます。

カンマ区切りのリストで使用したいテーブルを指定します。各テーブルは、角かっこ、二重引用符、またはバッククオートを使用してエスケープされた特殊文字列を含む有効なSQL 識別子である必要があります。例えば、Tables=TableA,[TableB/WithSlash],WithCatalog.WithSchema.`TableC With Space` です。

複数のスキーマまたはカタログを持つデータソースに接続する場合は、複数のカタログやスキーマに存在するテーブル間の曖昧さを避けるため、最後の例のように、このプロパティにテーブルの完全修飾名を指定する必要があることに注意してください。

Views

使用可能なテーブルのサブセットにレポートされるビューを制限します。例えば、Views=ViewA,ViewB,ViewC です。

解説

ビューを複数のデータベースからリストすると、負荷がかかる可能性があります。接続文字列でビューのリストを提供すると、Sync App のパフォーマンスが向上します。

このプロパティは、作業したいビューがすでにわかっていて、ビューが多すぎる場合に、ビューを自動的にリストする代わりに使用することもできます。

カンマ区切りのリストで使用したいビューを指定します。各ビューは、角かっこ、二重引用符、またはバッククオートを使用してエスケープされた特殊文字列を含む有効なSQL 識別子である必要があります。例えば、Views=ViewA,[ViewB/WithSlash],WithCatalog.WithSchema.`ViewC With Space` です。

複数のスキーマまたはカタログを持つデータソースに接続する場合は、複数のカタログやスキーマに存在するテーブル間の曖昧さを避けるため、最後の例のように、このプロパティにテーブルの完全修飾名を指定する必要があることに注意してください。

Miscellaneous

このセクションでは、本プロバイダーの接続文字列で設定可能なMiscellaneous プロパティの全リストを提供します。

プロパティ	説明
AccountId	The ID of the Account that you want to use.
LiveAPIKey	LiveAPIKey is required to generate and view the Reports.
MaxRows	クエリで集計またはGROUP BY を使用しない場合に返される行数を制限します。これはLIMIT 句よりも優先されます。
Other	これらの隠しプロパティは特定のユースケースでのみ使用されます。
PseudoColumns	このプロパティは、テーブルのカラムとして疑似カラムが含まれているかどうかを示します。
Timeout	タイムアウトエラーがスローされ、処理をキャンセルするまでの秒数。
UserDefinedViews	カスタムビューを含むJSON コンフィギュレーションファイルを指すファイルパス。

AccountId

The ID of the Account that you want to use.

解説

By default the provider uses the authenticated account.

LiveAPIKey

LiveAPIKey is required to generate and view the Reports.

解説

LiveAPIKey is required to generate and view the Reports.

MaxRows

クエリで集計またはGROUP BY を使用しない場合に返される行数を制限します。これはLIMIT 句よりも優先されます。

解説

クエリで集計またはGROUP BY を使用しない場合に返される行数を制限します。これはLIMIT 句よりも優先されます。

Other

これらの隠しプロパティは特定のユースケースでのみ使用されます。

解説

以下にリストされているプロパティは、特定のユースケースで使用可能です。通常のドライバーのユースケースおよび機能では、これらのプロパティは必要ありません。

複数のプロパティをセミコロン区切りリストで指定します。

統合およびフォーマット


DefaultColumnSize	データソースがメタデータにカラムの長さを提供しない場合に、文字列フィールドのデフォルトの長さを設定します。デフォルト値は2000です。
ConvertDateTimeToGMT	日時の値を、マシンのローカルタイムではなくGMT グリニッジ標準時に変換するかどうかを決定します。
RecordToFile=filename	基底のソケットデータ転送を指定のファイルに記録します。

PseudoColumns

このプロパティは、テーブルのカラムとして疑似カラムが含まれているかどうかを示します。

解説

Entity Framework ではテーブルカラムでない疑似カラムに値を設定できないため、この設定はEntity Framework で特に便利です。この接続設定の値は、"Table1=Column1, Table1=Column2, Table2=Column3" の形式です。"*=*" のように"*" 文字を使用して、すべてのテーブルとすべてのカラムを含めることができます。

Timeout

タイムアウトエラーがスローされ、処理をキャンセルするまでの秒数。

解説

Timeout が0に設定されている場合は、操作がタイムアウトしません。処理が正常に完了するか、エラー状態になるまで実行されます。

Timeout の有効期限が切れても処理が完了していない場合は、Sync App は例外をスローします。

UserDefinedViews

カスタムビューを含むJSON コンフィギュレーションファイルを指すファイルパス。

解説

ユーザー定義ビューは、UserDefinedViews.json というJSON 形式のコンフィギュレーションファイルで定義されています。Sync App は、このファイルで指定されたビューを自動的に検出します。

また、複数のビュー定義を持ち、UserDefinedViews 接続プロパティを使用して制御することも可能です。このプロパティを使用すると、指定されたビューのみがSync App によって検知されます。

このユーザー定義ビューのコンフィギュレーションファイルは、次のようにフォーマットされています。

各ルートエレメントはビューの名前を定義します。
各ルートエレメントには、query と呼ばれる子エレメントが含まれており、この子エレメントにはビューのカスタムSQL クエリが含まれています。

次に例を示します。

{
	"MyView": {
		"query": "SELECT * FROM Customers WHERE MyColumn = 'value'"
	},
	"MyView2": {
		"query": "SELECT * FROM MyTable WHERE Id IN (1,2,3)"
	}
}

UserDefinedViews 接続プロパティを使用して、JSON コンフィギュレーションファイルの場所を指定します。次に例を示します。

"UserDefinedViews", C:\Users\yourusername\Desktop\tmp\UserDefinedViews.json

指定されたパスは引用符で囲まれていないことに注意してください。

Stripe Connector for CData Sync

Stripe Connector for CData Sync

概要

Stripe バージョンサポート

接続の確立

Stripe への接続を追加

Stripe への接続

本番API キー

OAuth

高度な機能

ユーザー定義ビュー

SSL の設定

ファイアウォールとプロキシ

クエリ処理

ログ

SSL の設定

SSL 設定のカスタマイズ

ファイアウォールとプロキシ

Firewall またはProxy 経由の接続

HTTP プロキシ

その他のプロキシ

データモデル

テーブル

ビュー

ストアドプロシージャ

テーブル

Stripe Connector for CData Sync テーブル

Accounts

Table Specific Information

Select

Server-Side Query Support

Insert

Update

Delete

Columns

Pseudo-Columns

BankAccounts

Table Specific Information

Select

Server-Side Query Support

Insert

Update

Delete

Columns

Pseudo-Columns

BankAccountTokens

Table Specific Information

Select

Server-Side Query Support

Insert

Update

Delete

Columns

Pseudo-Columns

Cards

Table Specific Information

Select

Insert

Update

Delete

Columns

Pseudo-Columns

CardTokens

Table Specific Information

Select

Server-Side Query Support

Insert

Update

Delete

Columns

Pseudo-Columns

Charges

Table Specific Information

Select

Server-Side Query Support

Insert

Update

Delete

Columns

Pseudo-Columns