This section describes how to set up ODBC connectivity and configure DSNs on several Linux distributions: Debian-based systems, like Ubuntu, and Red Hat Linux platforms, like Red Hat Enterprise Linux (RHEL), CentOS, and Fedora.

Minimum Linux Versions

Here are the minimum supported versions for Red Hat-based and Debian-based systems:

OS	Min. Version
Ubuntu	11.04
Debian	7
RHEL	6.9
CentOS	6.9
Fedora	13
SUSE	12.1

Installing the Driver Dependencies

Run the following commands as root or with sudo to install the necessary dependencies:

• Debian/Ubuntu:
  

  apt-get install libc6 libstdc++6 zlib1g libgcc1

• RHEL/CentOS/Fedora:
  

  yum install glibc libstdc++ zlib libgcc

Here are the corresponding libraries required by the driver:

Debian/Ubuntu Package	RHEL/CentOS/Fedora Package	File
libc6	glibc	linux-vdso.1
libc6	glibc	libm.so.6
libc6	glibc	librt.so.1
libc6	glibc	libdl.so.2
libc6	glibc	libpthread.so.0
libc6	glibc	libc.so.6
libc6	glibc	ld-linux-x86-64.so.2
libstdc++6	libstdc++	libstdc++.so.6
zlib1g	zlib	libz.so.1
libgcc1	libgcc	libgcc_s.so.1

Installing the Driver

You can use standard package management systems to install the driver.

On Debian-based systems, like Ubuntu, run the following command with root or sudo:

dpkg -i /path/to/driver/setup/VeevaVaultODBCDriverforUnix.deb 

On systems that support the RPM package format, run the following command with root or sudo:

rpm -ivh /path/to/driver/VeevaVaultODBCDriverforUnix.rpm 

Licensing the Driver

Run the following commands to license the driver. To activate a trial, omit the <key> input.

cd /opt/cdata/cdata-odbc-driver-for-veevavault/bin/
sudo ./install-license.sh <key>

Connecting through the Driver Manager

The driver manager loads the driver and passes function calls from the application to the driver. You need to register the driver with the driver manager and you define DSNs in the driver manager's configuration files.

The driver installation registers the driver with the unixODBC driver manager and creates a system DSN. The unixODBC driver manager can be used from Python and from many other applications. Your application may embed another driver manager.

Creating the DSN

See Using unixODBC to install unixODBC and configure DSNs. See Using the DataDirect Driver Manager to create a DSN to connect to OBIEE, Informatica, and SAS.

Connecting to Veeva Vault

In order to connect to your Veeva Vault account, you will first need to specify the Url connection property to the host you see in the address bar after logging in to your account, ex. https://myvault.veevavault.com.

OpenID Connect with Azure AD

OpenID Connect with Azure AD is a connection type that goes through OAuth. Set the AuthScheme to AzureADOpenID and the OpenIDConnectProfileID connection property to the Id of your Open ID Connect profile, which can be found by navigating to Admin > Settings > OAuth 2.0 / OpenID Connect Profiles and expanding the details of your OpenID Connect Profile.

Authenticating to Veeva Vault

There are two authentication methods available for connecting to your Veeva Vault data source, Basic and OAuth 2.0 / OpenID Connect with the Azure AD Authentication Provider.

User Credentials

Set the AuthScheme to Basic and set the User and Password to your user login credentials.

OpenID with AzureAD

OpenID Connect with Azure AD is a connection type that goes through OAuth. Set the AuthScheme to AzureADOpenID. The following sections assume that you have done so.

Desktop Applications

Follow the steps below to authenticate with the credentials for a custom OAuth app. See Creating a Custom AzureAD App. See Creating a Custom AzureAD App. Get an OAuth Access Token

You are ready to connect after setting one of the below connection properties groups depending on the authentication type.

1. Authenticating using a Client Secret
   • OAuthClientId: Set this to the Client Id in your app settings.
   • OAuthClientSecret: Set this to the Client Secret in your app settings.
   • CallbackURL: Set this to the Redirect URL in your app settings. .
   • Optionally, depending on the required claims to complete the authentication with the Veeva Vault data source, you may need to set additional scopes via the Scope property. For example, to get the user name and email claims from the UserInfo endpoint, you will need to set the scope value to: 'openid profile email offline_access'.
2. Authenticating using a Certificate
   • OAuthClientId: Set this to the Client Id in your app settings.
   • OAuthJWTCert: Set this to the JWT Certificate store.
   • OAuthJWTCertType: Set this to the type of the certificate store specified by OAuthJWTCert.
   • CallbackURL: Set this to the Redirect URL in your app settings. .
   • Optionally, depending on the required claims to complete the authentication with the Veeva Vault data source, you may need to set additional scopes via the Scope property. For example, to get the user name and email claims from the UserInfo endpoint, you will need to set the scope value to: 'openid profile email offline_access'.

When you connect the driver opens the OAuth endpoint in your default browser. Log in and grant permissions to the application.

Headless Machines

To configure the driver to use OAuth with a user account on a headless machine, you need to authenticate on another device that has an internet browser.

1. Choose one of these two options:
   • Option 1: Obtain the OAuthVerifier value as described in "Obtain and Exchange a Verifier Code" below.
   • Option 2: Install the driver on another machine and transfer the OAuth authentication values after you authenticate through the usual browser-based flow, as described in "Transfer OAuth Settings" below.

2. Then configure the driver to automatically refresh the access token from the headless machine.

Option 1: Obtain and Exchange a Verifier Code

To obtain a verifier code, you must authenticate at the OAuth authorization URL.

Follow the steps below to authenticate from the machine with an internet browser and obtain the OAuthVerifier connection property.

1. Choose one of these options:
   • If you are using the Embedded OAuth Application click Veeva Vault OAuth endpoint to open the endpoint in your browser.
   • If you are using a custom OAuth application, create the Authorization URL by setting the following properties:
     • InitiateOAuth: Set to OFF.
     • OAuthClientId: Set to the client Id assigned when you registered your application.
     • OAuthClientSecret: Set to the client secret assigned when you registered your application.
     Then call the GetOAuthAuthorizationURL stored procedure with the appropriate CallbackURL. Open the URL returned by the stored procedure in a browser.

2. Log in and grant permissions to the driver. You are then redirected to the callback URL, which contains the verifier code.
3. Save the value of the verifier code. Later you will set this in the OAuthVerifier connection property.

Next, you need to exchange the OAuth verifier code for OAuth refresh and access tokens. Set the following properties:

On the headless machine, set the following connection properties to obtain the OAuth authentication values:

• InitiateOAuth: Set this to REFRESH.
• OAuthVerifier: Set this to the verifier code.
• OAuthClientId: (custom applications only) Set this to the client Id in your custom OAuth application settings.
• OAuthClientSecret: (custom applications only) Set this to the client secret in the custom OAuth application settings.
• OAuthSettingsLocation: Set this to the path to the file where the driver saves the OAuth token values that persist across connections.

After the OAuth settings file is generated, you need to re-set the following properties to connect:

• InitiateOAuth: Set this to REFRESH.
• OAuthClientId: (custom applications only) Set this to the client Id assigned when you registered your application.
• OAuthClientSecret: (custom applications only) Set this to the client secret assigned when you registered your application.
• OAuthSettingsLocation: Set this to the file containing the encrypted OAuth authentication values. Make sure this file grants read and write permissions to the driver to enable the automatic refreshing of the access token.

Option 2: Transfer OAuth Settings

Prior to connecting on a headless machine, you need to create and install a connection with the driver on a device that supports an internet browser. Set the connection properties as described in "Desktop Applications" above.

After completing the instructions in "Desktop Applications", the resulting authentication values are encrypted and written to the path specified by OAuthSettingsLocation. The default filename is OAuthSettings.txt.

Once you have successfully tested the connection, copy the OAuth settings file to your headless machine.

On the headless machine, set the following connection properties to connect to data:

• InitiateOAuth: Set this to REFRESH.
• OAuthClientId: (custom applications only) Set this to the client Id assigned when you registered your application.
• OAuthClientSecret: (custom applications only) Set this to the client secret assigned when you registered your application.
• OAuthSettingsLocation: Set this to the path to your OAuth settings file. Make sure this file gives read and write permissions to the driver to enable the automatic refreshing of the access token.

Set the Driver Encoding

The ODBC drivers need to specify which encoding to use with the ODBC Driver Manager. By default, the CData ODBC Drivers for Unix are configured to use UTF-16 which is compatible with unixODBC, but other Driver Managers may require alternative encoding.

Alternatively, if you are using the ODBC driver from an application that uses the ANSI ODBC API it may be necessary to set the ANSI code page. For example, to import Japanese characters in an ANSI application, you can specify the code page in the config file '/opt/cdata/cdata-odbc-driver-for-veevavault/lib/cdata.odbc.veevavault.ini':

[Driver]
AnsiCodePage = 932