ODBC Driver for Salesforce

Build 22.0.8462

Windows DSN Configuration

Using the Microsoft ODBC Data Source Administrator

You can use the Microsoft ODBC Data Source Administrator to edit the DSN configuration. Note that the DSN is created during the installation process.

Complete the following steps to edit the DSN configuration:

  1. Select Start > Search, and enter ODBC Data Sources in the Search box.
  2. Choose the version of the ODBC Administrator that corresponds to the bitness of your application (32-bit or 64-bit).
  3. Click the System DSN tab.
  4. Select the system data source and click Configure.
  5. Edit the information on the Connection tab and click OK.

Note: For .NET Framework 4.0, the driver distributes Microsoft Visual C++ 2015-2022 Redistributable. For .NET Framework 3.5, the driver distributes Microsoft Visual C++ 2008 Redistributable.

Connecting to Salesforce

By default, the driver connects to production environments. Set UseSandbox to true to use a Salesforce sandbox account. If you are using user/password authentication, ensure that you specify a sandbox username in User.

Authenticating to Salesforce

User Credentials and a Security Token

Set the AuthScheme to Basic and set the User and Password to your login credentials. Additionally, set the SecurityToken. By default, the SecurityToken is required, but you can make it optional by configuring a range of trusted IP addresses in Salesforce.

To disable the security token:

  1. Log in to Salesforce and enter Network Access in the Quick Find box in the setup section.
  2. Add your IP address to the list of trusted IP addresses.

To obtain the security token:

  1. Open the personal information page on Salesforce.com.
  2. Click the link to reset your security token. The token will be emailed to you.
  3. Specify the security token in the SecurityToken connection property or append it to the Password.

OAuth

AuthScheme must be set to OAuth in all user account flows.

Desktop Applications

CData provides an embedded OAuth application that simplifies OAuth desktop Authentication. Alternatively, you can create a custom application. See Creating a Custom OAuth App for information on creating custom applications and reasons for doing so.

For authentication, the only difference between the two methods is that you must set two additional connection properties when using custom OAuth applications.

After setting the following connection properties, you are ready to connect:

  • OAuthClientId: (custom applications only) Set to the Client ID in your application settings.
  • OAuthClientSecret: (custom applications only) Set to the Client Secret in your application settings.

When you connect, the driver opens the OAuth endpoint in your default browser. Log in and grant permissions to the application. The driver then completes the OAuth process as follows:

Headless Machines

To configure the driver to use OAuth with a user account on a headless machine, you need to authenticate on another device that has an internet browser.

  1. Choose one of two options:

    • Option 1: Obtain the OAuthVerifier value as described in "Obtain and Exchange a Verifier Code" below.
    • Option 2: Install the driver on a machine with a browser and transfer the OAuth authentication values after you authenticate through the usual browser-based flow, as described in "Transfer OAuth Settings" below.

  2. Then configure the driver to automatically refresh the access token on the headless machine.

Option 1: Obtain and Exchange a Verifier Code

To obtain a verifier code, you must authenticate at the OAuth authorization URL.

Follow the steps below to authenticate from the machine with an internet browser and obtain the OAuthVerifier connection property.

  1. Choose one of these options:

    • If you are using the Embedded OAuth Application click Salesforce OAuth endpoint to open the endpoint in your browser.
    • If you are using a Custom OAuthd Application, create the Authorization URL by setting the following properties:
      • InitiateOAuth: Set to OFF.
      • OAuthClientId: Set to the client Id assigned when you registered your application.
      • OAuthClientSecret: Set to the client secret assigned when you registered your application.
      Then call the GetOAuthAuthorizationURL stored procedure with the appropriate CallbackURL. Open the URL returned by the stored procedure in a browser.

  2. Log in and grant permissions to the driver. You are then redirected to the callback URL, which contains the verifier code.
  3. Save the value of the verifier code. Later you will set this in the OAuthVerifier connection property.
Next, you need to exchange the OAuth verifier code for OAuth refresh and access tokens. Set the following properties:

On the headless machine, set the following connection properties to obtain the OAuth authentication values.

  • InitiateOAuth: Set this to REFRESH.
  • OAuthVerifier: Set this to the verifier code.
  • OAuthClientId: (custom applications only) Set this to the client Id in your custom OAuth application settings.
  • OAuthClientSecret: (custom applications only) Set this to the client secret in the custom OAuth application settings.
  • OAuthSettingsLocation: Set this to persist the encrypted OAuth authentication values to the specified file.

After the OAuth settings file is generated, you need to re-set the following properties to connect:

  • InitiateOAuth: Set this to REFRESH.
  • OAuthClientId: (custom applications only) Set this to the client Id assigned when you registered your application.
  • OAuthClientSecret: (custom applications only) Set this to the client secret assigned when you registered your application.
  • OAuthSettingsLocation: Set this to the file containing the encrypted OAuth authentication values. Make sure this file gives read and write permissions to the driver to enable the automatic refreshing of the access token.

Option 2: Transfer OAuth Settings

Prior to connecting on a headless machine, you need to install and create a connection with the driver on a device that supports an internet browser. Set the connection properties as described in "Desktop Applications" above.

After completing the instructions in "Desktop Applications", the resulting authentication values are encrypted and written to the path specified by OAuthSettingsLocation. The default filename is OAuthSettings.txt.

After you have successfully tested the connection, copy the OAuth settings file to your headless machine.

On the headless machine, set the following connection properties to connect to data:

  • InitiateOAuth: Set this to REFRESH.
  • OAuthClientId: (custom applications only) Set this to the client Id assigned when you registered your application.
  • OAuthClientSecret: (custom applications only) Set this to the client secret assigned when you registered your application.
  • OAuthSettingsLocation: Set this to the path to your OAuth settings file. Make sure this file gives read and write permissions to the driver to enable the automatic refreshing of the access token.

OAuth Password Grant

Follow these steps to set up the Password Grant option:

  1. Set the AuthScheme to OAuthPassword to perform authentication with the password grant type.
  2. Set all the properties specified in either the web or desktop authentication sections above.
  3. Set the User and Password to your login credentials, as well as the SecurityToken if required.

OAuthJWT Certificates

Set the AuthScheme to OAuthJWT.

OAuthJWT

To obtain the OAuthJWT consumer key:

  1. Log in to Salesforce.com.
  2. From Setup, enter Apps in the Quick Find box and then click the link to create an app. In the Connected Apps section of the resulting page, click New.
  3. Enter a name to be displayed to users when they log in to grant permissions to your app, along with a contact Email address.
  4. Click Enable OAuth Settings and enter a value in the Callback URL box. Set this value only to create the Connected App as it is required. It will not actually be needed for this type of authentication. The Callback URL is in the format: 
    http://localhost:8019/src/oauthCallback.rst
  5. Enable Use digital signatures.
  6. Upload your certificate.
  7. Select the scope of permissions that your app should request from the user.
  8. Click your app name to open a page with information about your app. The OAuth consumer key is displayed.

After creating your OAuth Application, set the following connection properties:

  • AuthScheme: Set to OAuthJWT.
  • InitiateOAuth: Set to GETANDREFRESH.
  • OAuthJWTCert: Set this to the JWT Certificate store.
  • OAuthJWTCertType: Set this to the type of the certificate store specified by OAuthJWTCert.
  • OAuthJWTCertPassword: Set this to the Password of the JWT Certificate store.
  • OAuthJWTIssuer: Set this to the OAuth Client ID.
  • OAuthJWTSubject: Set this to the username (email address) to the permitteed User Profile configured in the OAuth Connected App.

Note: This flow never issues a refresh token.

AzureAD

Set the AuthScheme to AzureAD. Use the following connection properties to connect to AzureAD:

  • SSOExchangeUrl: The Salesforce OAuth 2.0 token endpoint for the identity provider. This can be found in the Salesforce account settings by navigating to Administration Setup > Security Controls > SAML Single Sign-On Settings and then choosing the desired organization.

Note that this configuration requires two AAD applications: the "Salesforce" application used for single sign-on, and a separate "connector" application with user_impersonation permission on the "Salesforce" application. You must also specify the OAuth connection properties:

  • OAuthClientId: The application Id of the connector application, listed in the Overview section of the app registration.
  • OAuthClientSecret: The client secret value of the connector application. Azure AD displays this when you create a new client secret.

Use the following SSOProperties to authenticate to AzureAD:

  • Resource: The application Id URI of the Salesforce application, listed in the Overview section of the app registration. In most cases this is the URL of your custom Salesforce domain.
  • AzureTenant: The Id of the Azure AD tenant where the applications are registered.

The following is an example connection string: 

AuthScheme=AzureAD;InitiateOAuth=GETANDREFRESH;OAuthClientId=3ea1c786-d527-4399-8c3b-2e3696ae4b48;OauthClientSecret=xxx;SSOProperties='Resource=https://example.my.salesforce.com;AzureTenant=6ee709df-9de0-4cdf-10e6b7a51d95';

Okta

Set the AuthScheme to Okta. Use the following connection properties to connect to Okta:

  • User: Set this to the Okta user.
  • Password: Set this to Okta password for the user.
  • SSOLoginURL: Set this to the login url used by the SSO provider.
  • SSOExchangeUrl: The Salesforce OAuth 2.0 token endpoint for the identity provider. This can be found in the Salesforce account settings by navigating to Administration Setup > Security Controls > SAML Single Sign-On Settings and then choosing the desired organization.
You need the following SSOProperties to authenticate to Okta:

  • APIToken (optional): Set this to the API Token that the customer created from the Okta org. You should use this when authenticating a user via a trusted application or proxy that overrides OKTA client request context.
  • MFAType (optional): Set this only in case you have configured MFA flow. Currently we support only the following types: OktaVerify, Email, and SMS.
  • MFAPassCode (optional): Set this only in case you have configured MFA flow. If this is set to empty/invalid the driver initially issues a MFA challenge that triggers the platform to send you a one-time password on your device or email, based on the configured MFA type. You need to re-issue another connection where the retrieved one-time password value is passed to MFAPassCode connection property.

The following is an example connection string: 

AuthScheme=PingFederate;User=PingFederateUserName;Password=PingFederatePassword;URL='http://sharepointserver/mysite';

OneLogin

Set the AuthScheme to OneLogin. Use the following connection properties to connect to OneLogin:

  • User: Set this to the OneLogin user.
  • Password: Set this to OneLogin password for the user.
  • SSOExchangeUrl: The Salesforce OAuth 2.0 token endpoint for the identity provider. This can be found in the Salesforce account settings by navigating to Administration Setup > Security Controls > SAML Single Sign-On Settings and then choosing the desired organization.
You need the following SSOProperties to authenticate to OneLogin:

  • OAuthClientId: Set to the OAuthClientId, which you can obtain by selecting Developers > API Credentials > Credential > ClientId.
  • OAuthClientSecret: Set to the OAuthClientSecret, which you can obtain by selecting Developers > API Credentials > Credential > ClientSecret.
  • Subdomain: Set to the subdomain of the OneLogin user accessing the SSO app. For example, if your OneLogin URL is splinkly.onelogin.com, enter splinkly as the subdomain value.
  • AppId: Set to the Id of the SSO app.
  • Region (optional): Set to the region your OneLogin account resides in. The OneLogin API operates in multiple regions and this property is used to find the correct domain. It can take one of the following values:
    • US (default)
    • EU

The following is an example connection string: 

AuthScheme=OneLogin;User=OneLoginUserName;Password=OneLoginPassword;SSOProperties='OAuthClientID=3fc8394584f153ce3b7924d9cd4f686443a52b;OAuthClientSecret=ca9257fd5cc3277abb5818cea28c06fe9b3b285d73d06;Subdomain=OneLoginSubDomain;AppId=1433920';

PingFederate

Set the AuthScheme to PingFederate. The following connection properties need to be set:

  • User: Set this to the PingFederate user.
  • Password: Set this to PingFederate password for the user.
  • SSOLoginURL: Set this to the login url used by the SSO provider.
  • SSOExchangeUrl: The Salesforce OAuth 2.0 token endpoint for the identity provider. This can be found in the Salesforce account settings by navigating to Administration Setup > Security Controls > SAML Single Sign-On Settings and then choosing the desired organization.
Among SSOProperties to authenticate to PingFederate:

  • AuthScheme (optional): The authorization scheme to be used for the IdP endpoint. The allowed values for this IdP are None or Basic.
Additionally, you can use the following SSOProperties to configure mutual SSL authentication for SSOLoginURL, the WS-Trust STS endpoint:
  • SSLClientCert
  • SSLClientCertType
  • SSLClientCertSubject
  • SSLClientCertPassword
Below is an example connection string: 
AuthScheme=PingFederate;User=pingFederateUser;Password=pingFederatePassword;SSOLoginURL='https://<authority>/idp/sts.wst';SSOExchangeUrl='https://domain.my.salesforce.com/services/oauth2/token?so=00D3000006JDF';

ADFS

Set the AuthScheme to ADFS. The following connection properties need to be set:

  • User: Set this to the ADFS user.
  • Password: Set this to ADFS password for the user.
  • SSOLoginURL: Set this to the login url used by the SSO provider.
  • SSOExchangeUrl: The Salesforce OAuth 2.0 token endpoint for the identity provider. This can be found in the Salesforce account settings by navigating to Administration Setup > Security Controls > SAML Single Sign-On Settings and then choosing the desired organization.

You need the following SSOProperties to authenticate to ADFS:

  • RelyingParty: This attribute is the value of the Relying Party Identifier on the ADFS server for Salesforce.
Below is an example connection string: 
AuthScheme=ADFS;User=username;Password=password;SSOLoginURL='https://sts.company.com';SSOProperties='RelyingParty=https://saml.salesforce.com';

ADFS Integrated

The ADFS Integrated flow indicates you are connecting with the currently logged in Windows user credentials. To use the ADFS Integrated flow, do not specify the User and Password, but otherwise follow the same steps in the ADFS guide above.

Copyright (c) 2023 CData Software, Inc. - All rights reserved.
Build 22.0.8462