This section describes how to set up ODBC connectivity and configure DSNs on several Linux distributions: Debian-based systems, like Ubuntu, and Red Hat Linux platforms, like Red Hat Enterprise Linux (RHEL), CentOS, and Fedora.

Minimum Linux Versions

Here are the minimum supported versions for Red Hat-based and Debian-based systems:

OS	Min. Version
Ubuntu	11.04
Debian	7
RHEL	6.9
CentOS	6.9
Fedora	13
SUSE	12.1

Installing the Driver Dependencies

Run the following commands as root or with sudo to install the necessary dependencies:

• Debian/Ubuntu:
  

  apt-get install libc6 libstdc++6 zlib1g libgcc1

• RHEL/CentOS/Fedora:
  

  yum install glibc libstdc++ zlib libgcc

Here are the corresponding libraries required by the driver:

Debian/Ubuntu Package	RHEL/CentOS/Fedora Package	File
libc6	glibc	linux-vdso.1
libc6	glibc	libm.so.6
libc6	glibc	librt.so.1
libc6	glibc	libdl.so.2
libc6	glibc	libpthread.so.0
libc6	glibc	libc.so.6
libc6	glibc	ld-linux-x86-64.so.2
libstdc++6	libstdc++	libstdc++.so.6
zlib1g	zlib	libz.so.1
libgcc1	libgcc	libgcc_s.so.1

Installing the Driver

You can use standard package management systems to install the driver.

On Debian-based systems, like Ubuntu, run the following command with root or sudo:

dpkg -i /path/to/driver/setup/BingAdsODBCDriverforUnix.deb 

On systems that support the RPM package format, run the following command with root or sudo:

rpm -ivh /path/to/driver/BingAdsODBCDriverforUnix.rpm 

Licensing the Driver

Run the following commands to license the driver. To activate a trial, omit the <key> input.

cd /opt/cdata/cdata-odbc-driver-for-bingads/bin/
sudo ./install-license.sh <key>

Connecting through the Driver Manager

The driver manager loads the driver and passes function calls from the application to the driver. You need to register the driver with the driver manager and you define DSNs in the driver manager's configuration files.

The driver installation registers the driver with the unixODBC driver manager and creates a system DSN. The unixODBC driver manager can be used from Python and from many other applications. Your application may embed another driver manager.

Creating the DSN

See Using unixODBC to install unixODBC and configure DSNs. See Using the DataDirect Driver Manager to create a DSN to connect to OBIEE, Informatica, and SAS.

Connecting to Microsoft Ads

You need to register a Microsoft Ads account, get a developer token, and authenticate using OAuth to connect to the Microsoft Ads APIs.

Register a Bing Ads Account

Complete the following steps to sign up for a Microsoft Ads account and obtain the CustomerId and (optional) AccountId:

1. Sign up for a Microsoft Ads account in the Bing Ads Web application or at the Sandbox Site for a sandbox account.
2. Select Settings > Accounts and Billing and select a single account. The AccountId and CustomerId (cid) are displayed on the account's page and in the page's URL.

Get a Developer Token

To use the Microsoft Ads APIs, you must have a DeveloperToken in addition to the CustomerId. You must have the Super Admin role in Microsoft Ads to create a developer token, though you do not need special permissions to use the token.

1. Log in at the Bing Ads Developer Portal as a Microsoft Account user with the Microsoft Ads Super Admin role.
2. Click Request Token and take note of your developer token. You will set it in the DeveloperToken connection property.

Authenticating to Microsoft Ads

OAuth

AuthScheme must be set to OAuth in all user account flows.

Desktop Applications

CData provides an embedded OAuth application that simplifies OAuth desktop Authentication. Alternatively, you can create a custom application. See Creating a Custom OAuth App for information on creating custom applications and reasons for doing so.

For authentication, the only difference between the two methods is that you must set two additional connection properties when using custom OAuth applications.

After setting the following connection properties, you are ready to connect:

• OAuthClientId: (custom applications only) Set to the Client ID in your application settings.
• OAuthClientSecret: (custom applications only) Set to the Client Secret in your application settings.

When you connect, the driver opens the OAuth endpoint in your default browser. Log in and grant permissions to the application. The driver then completes the OAuth process as follows:

Headless Machines

To configure the driver to use OAuth with a user account on a headless machine, you need to authenticate on another device that has an internet browser.

1. Choose one of two options:
   • Option 1: Obtain the OAuthVerifier value as described in "Obtain and Exchange a Verifier Code" below.
   • Option 2: Install the driver on a machine with a browser and transfer the OAuth authentication values after you authenticate through the usual browser-based flow, as described in "Transfer OAuth Settings" below.

2. Then configure the driver to automatically refresh the access token on the headless machine.

Option 1: Obtain and Exchange a Verifier Code

To obtain a verifier code, you must authenticate at the OAuth authorization URL.

Follow the steps below to authenticate from the machine with an internet browser and obtain the OAuthVerifier connection property.

1. Choose one of these options:
   • If you are using the Embedded OAuth Application click Microsoft Ads OAuth endpoint to open the endpoint in your browser.
   • If you are using a Custom OAuthd Application, create the Authorization URL by setting the following properties:
     • InitiateOAuth: Set to OFF.
     • OAuthClientId: Set to the client Id assigned when you registered your application.
     • OAuthClientSecret: Set to the client secret assigned when you registered your application.
     Then call the GetOAuthAuthorizationURL stored procedure with the appropriate CallbackURL. Open the URL returned by the stored procedure in a browser.

2. Log in and grant permissions to the driver. You are then redirected to the callback URL, which contains the verifier code.
3. Save the value of the verifier code. Later you will set this in the OAuthVerifier connection property.

Next, you need to exchange the OAuth verifier code for OAuth refresh and access tokens. Set the following properties:

On the headless machine, set the following connection properties to obtain the OAuth authentication values.

• InitiateOAuth: Set this to REFRESH.
• OAuthVerifier: Set this to the verifier code.
• OAuthClientId: (custom applications only) Set this to the client Id in your custom OAuth application settings.
• OAuthClientSecret: (custom applications only) Set this to the client secret in the custom OAuth application settings.
• OAuthSettingsLocation: Set this to persist the encrypted OAuth authentication values to the specified file.

After the OAuth settings file is generated, you need to re-set the following properties to connect:

• InitiateOAuth: Set this to REFRESH.
• OAuthClientId: (custom applications only) Set this to the client Id assigned when you registered your application.
• OAuthClientSecret: (custom applications only) Set this to the client secret assigned when you registered your application.
• OAuthSettingsLocation: Set this to the file containing the encrypted OAuth authentication values. Make sure this file gives read and write permissions to the driver to enable the automatic refreshing of the access token.

Option 2: Transfer OAuth Settings

Prior to connecting on a headless machine, you need to install and create a connection with the driver on a device that supports an internet browser. Set the connection properties as described in "Desktop Applications" above.

After completing the instructions in "Desktop Applications", the resulting authentication values are encrypted and written to the path specified by OAuthSettingsLocation. The default filename is OAuthSettings.txt.

After you have successfully tested the connection, copy the OAuth settings file to your headless machine.

On the headless machine, set the following connection properties to connect to data:

• InitiateOAuth: Set this to REFRESH.
• OAuthClientId: (custom applications only) Set this to the client Id assigned when you registered your application.
• OAuthClientSecret: (custom applications only) Set this to the client secret assigned when you registered your application.
• OAuthSettingsLocation: Set this to the path to your OAuth settings file. Make sure this file gives read and write permissions to the driver to enable the automatic refreshing of the access token.

Refreshing OAuth Values

The driver can refresh the temporary OAuth access tokens obtained during the browser-based OAuth authentication exchange. By default, the driver saves the encrypted tokens in the odbc.ini file corresponding to the DSN. Access to this odbc.ini file can be restricted in the case of System DSNs.

To enable the automatic token exchange, you can give the driver write access to the system odbc.ini.

Installing Dependencies for OAuth Authentication

The OAuth authentication standard requires the authenticating user to interact with Microsoft Ads, using a web-browser. If the first OAuth interaction is to be done on the same machine the driver is installed on, for example, a desktop application, the driver needs access to the xdg-open program, which opens the default browser.

To satisfy this dependency, install the corresponding package with your package manager:

Debian/Ubuntu Package	RHEL/CentOS/Fedora Package	File
xdg-utils	xdg-utils	xdg-open

Set the Driver Encoding

The ODBC drivers need to specify which encoding to use with the ODBC Driver Manager. By default, the CData ODBC Drivers for Unix are configured to use UTF-16 which is compatible with unixODBC, but other Driver Managers may require alternative encoding.

Alternatively, if you are using the ODBC driver from an application that uses the ANSI ODBC API it may be necessary to set the ANSI code page. For example, to import Japanese characters in an ANSI application, you can specify the code page in the config file '/opt/cdata/cdata-odbc-driver-for-bingads/lib/cdata.odbc.bingads.ini':

[Driver]
AnsiCodePage = 932