CData Excel Add-In for Reckon 2019 - Online Help
Questions / Feedback?

Registry Keys

CData Excel Add-In for Reckon 2019 - Build 19.0.7354

All configuration data is read from the registry at "HKEY_LOCAL_MACHINE\SOFTWARE\RemoteConnector". Each user will have a separate subkey with user-specific settings. For instance "HKEY_LOCAL_MACHINE\SOFTWARE\RemoteConnector\User1".

Application-Level Settings

NameTypeDescription
LocalAuthStringA randomly generated administrator password that is used for authorization between the user interface and the Windows service. This is only used when authorizing a user configured for Windows authentication to Reckon from the user interface. This may be removed or changed if desired.
AllowedClientsStringA comma-separated list of host names or IP addresses that can access the server. The wildcard character '*' is supported (default). If unspecified any client can connect.
AuthFlagsDWORDSpecifies the versions of Reckon to which the application can connect. The value is a binary OR of the values below, represented in hex. The default value is "0xF" (all editions are supported).
  • "" or 0 (Do not send any auth flags)
  • 0x01 (Simple Start)
  • 0x02 (Pro)
  • 0x04 (Premier)
  • 0x08 (Enterprise)
CloseAndRetryConnectDWORDSpecifies whether connection retry logic is enabled. When set to 1 (True), if an error is encountered while opening a connection to Reckon the application will attempt to stop the Reckon process and reconnect. The CloseAndRetryTimeout, CloseAndRetryCount, and CloseAndRetryErrorList settings are applicable when this setting is 1 (True).
CloseAndRetryTimeoutDWORDSets the time in seconds that the application will wait for the connection to Reckon to be established. The default value is 30 (seconds). If the timeout is reached, the Reckon process will be closed and the connection will be retried. Note that this setting should be adjusted with caution. If the timeout is set too low the Reckon process may not have time to open normally before reaching the timeout. This setting is only applicable when CloseAndRetryConnect is True.
CloseAndRetryCountDWORDSets the number of times to retry the connection. If an error is encountered while opening a connection to Reckon, the application will stop the Reckon process and retry until this limit is reached. The default value is 3. This setting is only applicable when CloseAndRetryConnect is True.
CloseAndRetryErrorListStringSpecifies a comma-separated list of Reckon error codes on which to retry a connection. If Reckon returns an error code listed in this property, the Reckon process will be stopped and the connection will be retried. If the error is not in this list the application will return the error as normal. The default value is "0x80040402,0x80040408". Specify the value "*" to indicate all errors. This setting is only applicable when CloseAndRetryConnect is True.
QBInstanceFileString

Specifies the full path to the QBINSTANCEFINDER file in the Reckon installation. For instance: "C:\ProgramData\Intuit\Reckon\QBINSTANCEFINDER17.INI". This setting is only applicable when CloseAndRetryConnect is set to True.

If the connection retry logic stops the Reckon process the specified QBINSTANCEFINDER file will be cleared of any previous entries. Reckon uses the QBINSTANCEFINDER file to keep track of open instances, however, in some situations it may not be properly reset after stopping the process. When specified this setting allows the application to properly reset the file after stopping the process.

LocalHostStringSets the host name or user-assigned IP interface through which connections are initiated or accepted. In most cases this does not need to be set, as the application will use the default interface on the machine. If you have multiple interfaces, you can specify the interface to use here. For instance, "192.168.1.102".
LogEnabledDWORDEnables or disables logging to a file. Logs are always written to the console. The default is 0 (False).
LogDirStringSets the path to a folder on disk where log files will be written. This is only applicable if LogEnabled is set to True.
LogFormatDWORDSets how often new log files are created. Possible values are the following:
  • 0 (Daily - default)
  • 1 (Weekly)
  • 2 (Monthly)
LogLevelDWORDSets the logging level. Possible values are the following:
  • 0 (Off)
  • 1 (Error)
  • 2 (Warning
  • 3 (Info - default)
  • 4 (Verbose)
LogPortDWORDSets a separate port for logging. Log messages are sent over UDP from RemoteConnectorService.exe to the UI. By default this is the same value as the port defined in the Port option. Set this option to avoid using the same port as another UDP service running on the same machine.
PortDWORDSets the port where the server listens for incoming connections. The default value is 8166.
PersistentEnabled DWORDEnables or disables persistent connections to Reckon. The default is 0 (False), meaning that your code controls when the connection to Reckon is opened and closed by calling the Open and Close methods. However, when this setting is enabled, a persistent connection to Reckon is established by the Remote Connector even when Open and Close are not used. This is helpful in situations when multiple applications may be simultaneously accessing the Remote Connector, because it allows them to share the connection.
PersistentIdleTimeoutDWORDSets the idle timeout for the persistent connection in seconds. If there is no activity within this time window, the connection to Reckon will be closed. This is only applicable when PersistentEnabled is True.
PromptForRegPermissionsDWORDSpecifies whether to prompt to modify registry permissions when access is not allowed. This is only applicable when saving settings from the UI.
RunAsServiceDWORDRun the application as a service or with the standard run-time permissions. The default value is 1 (True).
SSLCertPasswordStringSets the password of the SSL certificate.
SSLCertStoreStringSets the location of the SSL certificate. This may be a path to a file or the name of a Windows certificate store: "MY", "ROOT", "CA", or "SPC".
SSLCertSubjectStringSets the subject of the SSL certificate.
SSLCertTypeStringSets the type of SSL certificate to use. A certificate must be specified when SSL is enabled. The PFX option signifies a .pfx file on disk. The User option signifies the user's Windows certificate store. The Machine option signifies the Windows certificate store of the machine.
SSLEnabledDWORDSets whether TLS/SSL connections are allowed. The default value is 0 (False). Enabling TLS/SSL disables plaintext connections.
TimeoutDWORDSets the operational timeout for connected clients. The default value is 60.
UseInteractiveLogonDWORDSets whether interactive or network logon will authorize users when AuthMode is set to 1 (Windows). In most cases this does not need to be set. This should be set to 1 (True) if your domain controller is Samba. The default value is 0 (False).

User-Level Settings

AppNameStringSets the name of the application that will be used to provide authentication to Reckon when a connection is made. If this value is not set, the Remote Connector uses the value provided by the client.
CompanyFileStringSets the path to a Reckon company file (.qbw). If this is not set, the currently open company file is used. When Reckon is not running, this option must be set.
PasswordStringSets the password of the user. This is required when AuthMode is set to 0 (Basic Authentication). The Remote Connector application will always store the SHA-256 hash of the password for security. However, this may also be manually set to a plaintext password to allow backward compatibility.
AuthModeDWORDSets the type of authentication to perform when the user connects. From the client side the process of connecting is exactly the same no matter which option you choose. Possible values are the following:
  • 0 (Basic Authentication - default)
  • 1 (Windows Authentication)
AuthorizedDWORDSpecifies whether the AppName has been authorized for the CompanyFile. If 1 (True) the AppName has been authorized with the CompanyFile. This is an indicator used by the application when changing settings in the UI.
ConnectionModeStringSets the connection mode for the user. The default is DontCare. In most cases you do not need to set this value. If this is not set, the application will connect in whatever mode Reckon is already open in. Possible values are the following:
  • DontCare (default)
  • Single
  • Multi
ReadOnlyDWORDSpecifies whether the user has read-only (1) or full access (0).

 
 
Copyright (c) 2020 CData Software, Inc. - All rights reserved.
Build 19.0.7354.0